! Started logfile: J2225-0457_S_2000_12_04_pus_uvs.log on Thu Oct 18 13:12:16 2007 obs J2225-0457_S_2000_12_04_pus_uva.fits ! Reading UV FITS file: J2225-0457_S_2000_12_04_pus_uva.fits ! AN table 1: 91 integrations on 190 of 190 possible baselines. ! AN table 2: 78 integrations on 190 of 190 possible baselines. ! AN table 3: 206 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.0574456 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2225-0457 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2169 lines of history. ! ! Reading 16372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 2048 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2225-0457_S_2000_12_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 2048x2048 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1516 telescope corrections were flagged in sub-array 1. ! A total of 1206 telescope corrections were flagged in sub-array 2. ! A total of 3254 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1516 telescope corrections were flagged in sub-array 1. ! A total of 1206 telescope corrections were flagged in sub-array 2. ! A total of 3254 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1516 telescope corrections were flagged in sub-array 1. ! A total of 1206 telescope corrections were flagged in sub-array 2. ! A total of 3251 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1516 telescope corrections were flagged in sub-array 1. ! A total of 1206 telescope corrections were flagged in sub-array 2. ! A total of 3251 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.413872Jy sigma=0.011714 ! Fit after self-cal, rms=1.058034Jy sigma=0.008760 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.532 mas, bmaj=5.59 mas, bpa=-7.558 degrees ! Estimated noise=998.685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.37715 Jy ! Component: 100 - total flux cleaned = 1.7292 Jy ! Total flux subtracted in 100 components = 1.7292 Jy ! Clean residual min=-0.049933 max=0.174288 Jy/beam ! Clean residual mean=0.000521 rms=0.013853 Jy/beam ! Combined flux in latest and established models = 1.7292 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.7292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.607324Jy sigma=0.004606 ! Fit after self-cal, rms=0.605070Jy sigma=0.004593 ! Inverting map ! Added new window around map position (3.5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.193312 Jy ! Component: 100 - total flux cleaned = 0.311768 Jy ! Total flux subtracted in 100 components = 0.311768 Jy ! Clean residual min=-0.041656 max=0.073072 Jy/beam ! Clean residual mean=0.000470 rms=0.010321 Jy/beam ! Combined flux in latest and established models = 2.04097 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 23 components and 2.04097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514995Jy sigma=0.003667 ! Fit after self-cal, rms=0.510702Jy sigma=0.003639 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0911508 Jy ! Component: 100 - total flux cleaned = 0.148324 Jy ! Total flux subtracted in 100 components = 0.148324 Jy ! Clean residual min=-0.038807 max=0.060821 Jy/beam ! Clean residual mean=0.000448 rms=0.009212 Jy/beam ! Combined flux in latest and established models = 2.18929 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 2.18929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489044Jy sigma=0.003386 ! Fit after self-cal, rms=0.487505Jy sigma=0.003377 ! Inverting map ! Added new window around map position (51.5, -18.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0628001 Jy ! Component: 100 - total flux cleaned = 0.108247 Jy ! Total flux subtracted in 100 components = 0.108247 Jy ! Clean residual min=-0.035600 max=0.042561 Jy/beam ! Clean residual mean=0.000416 rms=0.008632 Jy/beam ! Combined flux in latest and established models = 2.29754 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 49 components and 2.29754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.474890Jy sigma=0.003240 ! Fit after self-cal, rms=0.474090Jy sigma=0.003236 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.895 mas, bmaj=6.994 mas, bpa=-11.61 degrees ! Estimated noise=683.376 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0660497 Jy ! Component: 100 - total flux cleaned = 0.115398 Jy ! Component: 150 - total flux cleaned = 0.153727 Jy ! Component: 200 - total flux cleaned = 0.183689 Jy ! Total flux subtracted in 200 components = 0.183689 Jy ! Clean residual min=-0.040483 max=0.053797 Jy/beam ! Clean residual mean=0.003585 rms=0.011294 Jy/beam ! Combined flux in latest and established models = 2.48123 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 71 components and 2.48123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462446Jy sigma=0.003096 ! Fit after self-cal, rms=0.460914Jy sigma=0.003088 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 GC 1.00* GG 1.00* ! HH 1.12 HN 0.94 KK 1.00* KP 1.09 ! LA 1.04 MA 5.30 MC 1.12 MK 1.00* ! NL 1.01 NY 1.00* OV 1.03 PT 1.01 ! SC 1.08 TS 0.94 WF 0.84 WZ 0.93 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.98 GC 0.97 GG 1.00* ! HH 1.00* HN 1.00* KK 0.97 KP 1.06 ! LA 0.94 MA 1.00* MC 1.00* MK 1.02 ! NL 0.99 NY 1.00* OV 1.08 PT 0.94 ! SC 1.00* TS 1.00* WF 1.45 WZ 1.00* ! ! A total of 216 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.96 GC 1.00* GG 1.00* ! HH 1.05 HN 1.01 KK 1.02 KP 0.90 ! LA 1.02 MA 0.80 MC 0.96 MK 1.05 ! NL 0.99 NY 1.00* OV 0.98 PT 1.01 ! SC 1.01 TS 1.00* WF 1.04 WZ 0.96 ! ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 GC 1.00* GG 1.00* ! HH 1.13 HN 0.95 KK 1.00* KP 1.03 ! LA 1.01 MA 1.64 MC 1.04 MK 1.00* ! NL 0.95 NY 1.00* OV 1.00 PT 1.01 ! SC 1.03 TS 0.95 WF 0.83 WZ 0.88 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 GC 0.96 GG 1.00* ! HH 1.00* HN 1.00* KK 0.96 KP 0.97 ! LA 0.92 MA 1.00* MC 1.00* MK 1.04 ! NL 0.95 NY 1.00* OV 1.04 PT 0.95 ! SC 1.00* TS 1.00* WF 1.19 WZ 1.00* ! ! A total of 216 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.98 GC 1.00* GG 1.00* ! HH 1.02 HN 1.00 KK 1.05 KP 0.94 ! LA 0.98 MA 0.70 MC 0.90 MK 1.06 ! NL 0.94 NY 1.00* OV 0.95 PT 1.01 ! SC 0.98 TS 1.00* WF 0.97 WZ 0.90 ! ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.10 GC 1.00* GG 1.00* ! HH 1.06 HN 1.03 KK 1.00* KP 1.14 ! LA 1.29 MA 1.74 MC 1.93 MK 1.00* ! NL 1.05 NY 1.00* OV 1.17 PT 1.10 ! SC 1.05 TS 0.93 WF 0.87 WZ 0.82 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.00 GC 1.01 GG 1.00* ! HH 1.00* HN 1.00* KK 0.91 KP 0.93 ! LA 0.98 MA 1.00* MC 1.00* MK 0.95 ! NL 0.94 NY 1.00* OV 0.87 PT 0.96 ! SC 1.00* TS 1.00* WF 1.12 WZ 1.00* ! ! A total of 219 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 1.00 GC 1.00* GG 1.00* ! HH 0.86 HN 1.01 KK 1.00 KP 1.01 ! LA 1.07 MA 0.92 MC 2.03 MK 1.01 ! NL 1.49 NY 1.00* OV 1.00 PT 0.97 ! SC 0.95 TS 1.00* WF 0.85 WZ 0.86 ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 GC 1.00* GG 1.00* ! HH 1.04 HN 0.92 KK 1.00* KP 0.99 ! LA 1.01 MA 0.95 MC 1.20 MK 1.00* ! NL 0.97 NY 1.00* OV 1.01 PT 0.93 ! SC 1.06 TS 0.90 WF 0.84 WZ 0.94 ! ! A total of 72 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 GC 0.94 GG 1.00* ! HH 1.00* HN 1.00* KK 0.97 KP 0.96 ! LA 0.93 MA 1.00* MC 1.00* MK 1.00 ! NL 0.94 NY 1.00* OV 1.04 PT 0.96 ! SC 1.00* TS 1.00* WF 1.15 WZ 1.00* ! ! A total of 219 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.96 GC 1.00* GG 1.00* ! HH 0.87 HN 0.97 KK 1.01 KP 0.95 ! LA 0.96 MA 1.01 MC 1.60 MK 1.03 ! NL 0.96 NY 1.00* OV 0.98 PT 1.03 ! SC 1.00 TS 1.00* WF 0.96 WZ 1.00 ! ! ! Fit before self-cal, rms=0.460914Jy sigma=0.003088 ! Fit after self-cal, rms=0.481231Jy sigma=0.002476 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.212 mas, bpa=-11.77 degrees ! Estimated noise=712.402 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (41.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407464 Jy ! Component: 100 - total flux cleaned = 0.0676684 Jy ! Component: 150 - total flux cleaned = 0.088087 Jy ! Component: 200 - total flux cleaned = 0.104331 Jy ! Total flux subtracted in 200 components = 0.104331 Jy ! Clean residual min=-0.023081 max=0.032525 Jy/beam ! Clean residual mean=0.000692 rms=0.006928 Jy/beam ! Combined flux in latest and established models = 2.58556 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 115 components and 2.58556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476887Jy sigma=0.002418 ! Fit after self-cal, rms=0.480261Jy sigma=0.002414 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.480261Jy sigma=0.002414 ! Fit after self-cal, rms=0.476319Jy sigma=0.002229 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.21 mas, bpa=-11.84 degrees ! Estimated noise=712.698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195476 Jy ! Component: 100 - total flux cleaned = 0.0348248 Jy ! Component: 150 - total flux cleaned = 0.0445275 Jy ! Component: 200 - total flux cleaned = 0.0523555 Jy ! Total flux subtracted in 200 components = 0.0523555 Jy ! Clean residual min=-0.019616 max=0.031042 Jy/beam ! Clean residual mean=0.000654 rms=0.006191 Jy/beam ! Combined flux in latest and established models = 2.63792 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 139 components and 2.63792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.475049Jy sigma=0.002210 ! Fit after self-cal, rms=0.474963Jy sigma=0.002209 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (123.5, -36). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351217 Jy ! Component: 100 - total flux cleaned = 0.0583887 Jy ! Component: 150 - total flux cleaned = 0.0750296 Jy ! Component: 200 - total flux cleaned = 0.0883422 Jy ! Total flux subtracted in 200 components = 0.0883422 Jy ! Clean residual min=-0.018158 max=0.030114 Jy/beam ! Clean residual mean=0.000594 rms=0.005530 Jy/beam ! Combined flux in latest and established models = 2.72626 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 193 components and 2.72626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.471020Jy sigma=0.002159 ! Fit after self-cal, rms=0.471065Jy sigma=0.002156 ! Inverting map ! Added new window around map position (70.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0317388 Jy ! Component: 100 - total flux cleaned = 0.0528055 Jy ! Component: 150 - total flux cleaned = 0.0687545 Jy ! Component: 200 - total flux cleaned = 0.0821504 Jy ! Total flux subtracted in 200 components = 0.0821504 Jy ! Clean residual min=-0.016148 max=0.025207 Jy/beam ! Clean residual mean=0.000507 rms=0.004836 Jy/beam ! Combined flux in latest and established models = 2.80841 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 239 components and 2.80841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.468011Jy sigma=0.002115 ! Fit after self-cal, rms=0.468958Jy sigma=0.002112 ! Inverting map ! Added new window around map position (57.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024959 Jy ! Component: 100 - total flux cleaned = 0.0402004 Jy ! Component: 150 - total flux cleaned = 0.0501605 Jy ! Component: 200 - total flux cleaned = 0.0590606 Jy ! Total flux subtracted in 200 components = 0.0590606 Jy ! Clean residual min=-0.015394 max=0.025257 Jy/beam ! Clean residual mean=0.000443 rms=0.004576 Jy/beam ! Combined flux in latest and established models = 2.86747 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 283 components and 2.86747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466951Jy sigma=0.002088 ! Fit after self-cal, rms=0.466986Jy sigma=0.002085 ! Inverting map ! Added new window around map position (14.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0238117 Jy ! Component: 100 - total flux cleaned = 0.0392607 Jy ! Component: 150 - total flux cleaned = 0.0508075 Jy ! Component: 200 - total flux cleaned = 0.0582584 Jy ! Total flux subtracted in 200 components = 0.0582584 Jy ! Clean residual min=-0.013376 max=0.019345 Jy/beam ! Clean residual mean=0.000386 rms=0.004153 Jy/beam ! Combined flux in latest and established models = 2.92573 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 312 components and 2.92573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465378Jy sigma=0.002062 ! Fit after self-cal, rms=0.464927Jy sigma=0.002060 ! Inverting map ! Added new window around map position (73.5, -194). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183487 Jy ! Component: 100 - total flux cleaned = 0.0303317 Jy ! Component: 150 - total flux cleaned = 0.0395067 Jy ! Component: 200 - total flux cleaned = 0.0463321 Jy ! Total flux subtracted in 200 components = 0.0463321 Jy ! Clean residual min=-0.013617 max=0.016208 Jy/beam ! Clean residual mean=0.000367 rms=0.003869 Jy/beam ! Combined flux in latest and established models = 2.97206 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 339 components and 2.97206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.463979Jy sigma=0.002045 ! Fit after self-cal, rms=0.464011Jy sigma=0.002044 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.464011Jy sigma=0.002044 ! Fit after self-cal, rms=0.465795Jy sigma=0.001986 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=7.206 mas, bpa=-11.95 degrees ! Estimated noise=709.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120859 Jy ! Component: 100 - total flux cleaned = 0.0214373 Jy ! Component: 150 - total flux cleaned = 0.0306873 Jy ! Component: 200 - total flux cleaned = 0.0391947 Jy ! Total flux subtracted in 200 components = 0.0391947 Jy ! Clean residual min=-0.011919 max=0.014823 Jy/beam ! Clean residual mean=0.000381 rms=0.003368 Jy/beam ! Combined flux in latest and established models = 3.01125 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 373 components and 3.01125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.464898Jy sigma=0.001974 ! Fit after self-cal, rms=0.464850Jy sigma=0.001974 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (136, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156459 Jy ! Component: 100 - total flux cleaned = 0.0259761 Jy ! Component: 150 - total flux cleaned = 0.0343606 Jy ! Component: 200 - total flux cleaned = 0.0407797 Jy ! Total flux subtracted in 200 components = 0.0407797 Jy ! Clean residual min=-0.012324 max=0.014329 Jy/beam ! Clean residual mean=0.000352 rms=0.003172 Jy/beam ! Combined flux in latest and established models = 3.05203 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 419 components and 3.05203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.463759Jy sigma=0.001963 ! Fit after self-cal, rms=0.463635Jy sigma=0.001962 ! Inverting map ! Added new window around map position (229, 151). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143819 Jy ! Component: 100 - total flux cleaned = 0.0237087 Jy ! Component: 150 - total flux cleaned = 0.0320478 Jy ! Component: 200 - total flux cleaned = 0.0385879 Jy ! Total flux subtracted in 200 components = 0.0385879 Jy ! Clean residual min=-0.011464 max=0.012479 Jy/beam ! Clean residual mean=0.000317 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 3.09062 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 455 components and 3.09062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462954Jy sigma=0.001953 ! Fit after self-cal, rms=0.462720Jy sigma=0.001953 ! Inverting map ! Added new window around map position (177.5, -49). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120162 Jy ! Component: 100 - total flux cleaned = 0.0202662 Jy ! Component: 150 - total flux cleaned = 0.0269752 Jy ! Component: 200 - total flux cleaned = 0.0330053 Jy ! Total flux subtracted in 200 components = 0.0330053 Jy ! Clean residual min=-0.011180 max=0.011271 Jy/beam ! Clean residual mean=0.000302 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 3.12363 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 482 components and 3.12363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462043Jy sigma=0.001946 ! Fit after self-cal, rms=0.462045Jy sigma=0.001946 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462045Jy sigma=0.001946 ! Fit after self-cal, rms=0.462818Jy sigma=0.001944 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.851 mas, bmaj=13.11 mas, bpa=-4.57 degrees ! Estimated noise=935.771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164733 Jy ! Component: 100 - total flux cleaned = 0.0305102 Jy ! Component: 150 - total flux cleaned = 0.0430059 Jy ! Component: 200 - total flux cleaned = 0.0543228 Jy ! Total flux subtracted in 200 components = 0.0543228 Jy ! Clean residual min=-0.014544 max=0.018312 Jy/beam ! Clean residual mean=0.000652 rms=0.004764 Jy/beam ! Combined flux in latest and established models = 3.17795 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 518 components and 3.17795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.462272Jy sigma=0.001939 ! Fit after self-cal, rms=0.461791Jy sigma=0.001938 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110519 Jy ! Component: 100 - total flux cleaned = 0.0210613 Jy ! Component: 150 - total flux cleaned = 0.03024 Jy ! Component: 200 - total flux cleaned = 0.0386705 Jy ! Total flux subtracted in 200 components = 0.0386705 Jy ! Clean residual min=-0.014747 max=0.018312 Jy/beam ! Clean residual mean=0.000588 rms=0.004552 Jy/beam ! Combined flux in latest and established models = 3.21662 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 543 components and 3.21662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.461533Jy sigma=0.001937 ! Fit after self-cal, rms=0.461528Jy sigma=0.001937 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.205 mas, bpa=-11.98 degrees ! Estimated noise=708.813 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.956 x 7.205 at -11.98 degrees (North through East) ! Clean map min=-0.0099942 max=1.8004 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.461528Jy sigma=0.001937 ! Fit after self-cal, rms=1.250189Jy sigma=0.001691 ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=7.198 mas, bpa=-11.93 degrees ! Estimated noise=708.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027709 Jy ! Component: 100 - total flux cleaned = 0.00575187 Jy ! Component: 150 - total flux cleaned = 0.00897782 Jy ! Component: 200 - total flux cleaned = 0.011986 Jy ! Total flux subtracted in 200 components = 0.011986 Jy ! Clean residual min=-0.009148 max=0.011265 Jy/beam ! Clean residual mean=0.000232 rms=0.002428 Jy/beam ! Combined flux in latest and established models = 3.22861 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 567 components and 3.22861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.250078Jy sigma=0.001686 ! Fit after self-cal, rms=1.250639Jy sigma=0.001686 ! Inverting map ! Added new window around map position (232.5, -19.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108349 Jy ! Component: 100 - total flux cleaned = 0.0166943 Jy ! Component: 150 - total flux cleaned = 0.0208643 Jy ! Component: 200 - total flux cleaned = 0.0241275 Jy ! Total flux subtracted in 200 components = 0.0241275 Jy ! Clean residual min=-0.008932 max=0.010549 Jy/beam ! Clean residual mean=0.000225 rms=0.002340 Jy/beam ! Combined flux in latest and established models = 3.25273 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 599 components and 3.25273 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.250338Jy sigma=0.001681 ! Fit after self-cal, rms=1.250247Jy sigma=0.001681 ! Inverting map ! Added new window around map position (67, -152). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010021 Jy ! Component: 100 - total flux cleaned = 0.0162173 Jy ! Component: 150 - total flux cleaned = 0.021137 Jy ! Component: 200 - total flux cleaned = 0.024919 Jy ! Total flux subtracted in 200 components = 0.024919 Jy ! Clean residual min=-0.009173 max=0.010102 Jy/beam ! Clean residual mean=0.000210 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 3.27765 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 622 components and 3.27765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.249946Jy sigma=0.001677 ! Fit after self-cal, rms=1.249898Jy sigma=0.001677 ! Inverting map ! Added new window around map position (109.5, -47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010413 Jy ! Component: 100 - total flux cleaned = 0.0169072 Jy ! Component: 150 - total flux cleaned = 0.0220348 Jy ! Component: 200 - total flux cleaned = 0.0263902 Jy ! Total flux subtracted in 200 components = 0.0263902 Jy ! Clean residual min=-0.008598 max=0.009946 Jy/beam ! Clean residual mean=0.000190 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 3.30404 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 656 components and 3.30404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.249573Jy sigma=0.001672 ! Fit after self-cal, rms=1.249749Jy sigma=0.001671 ! Inverting map ! Added new window around map position (149.5, -222). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00920039 Jy ! Component: 100 - total flux cleaned = 0.0145967 Jy ! Component: 150 - total flux cleaned = 0.0194446 Jy ! Component: 200 - total flux cleaned = 0.0238106 Jy ! Total flux subtracted in 200 components = 0.0238106 Jy ! Clean residual min=-0.008625 max=0.008858 Jy/beam ! Clean residual mean=0.000190 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 3.32785 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 681 components and 3.32785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.249553Jy sigma=0.001667 ! Fit after self-cal, rms=1.250382Jy sigma=0.001667 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.250382Jy sigma=0.001667 ! Fit after self-cal, rms=1.023743Jy sigma=0.001666 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.605 mas, bmaj=5.689 mas, bpa=-9.592 degrees ! Estimated noise=1011.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.36849 Jy ! Component: 100 - total flux cleaned = 1.74768 Jy ! Component: 150 - total flux cleaned = 1.9477 Jy ! Component: 200 - total flux cleaned = 2.06703 Jy ! Total flux subtracted in 200 components = 2.06703 Jy ! Clean residual min=-0.028202 max=0.063917 Jy/beam ! Clean residual mean=0.000369 rms=0.007340 Jy/beam ! Combined flux in latest and established models = 2.06703 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 2.06703 Jy ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.2 mas, bpa=-11.95 degrees ! Estimated noise=707.754 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119948 Jy ! Component: 100 - total flux cleaned = 0.20871 Jy ! Component: 150 - total flux cleaned = 0.279051 Jy ! Component: 200 - total flux cleaned = 0.337782 Jy ! Total flux subtracted in 200 components = 0.337782 Jy ! Clean residual min=-0.027853 max=0.042230 Jy/beam ! Clean residual mean=0.000912 rms=0.008357 Jy/beam ! Combined flux in latest and established models = 2.40481 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 89 components and 2.40481 Jy ! Inverting map ! Added new window around map position (7, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519709 Jy ! Component: 100 - total flux cleaned = 0.0978723 Jy ! Component: 150 - total flux cleaned = 0.139536 Jy ! Component: 200 - total flux cleaned = 0.17761 Jy ! Total flux subtracted in 200 components = 0.17761 Jy ! Clean residual min=-0.022260 max=0.026721 Jy/beam ! Clean residual mean=0.000748 rms=0.006496 Jy/beam ! Combined flux in latest and established models = 2.58242 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 159 components and 2.58242 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.848 mas, bmaj=13.1 mas, bpa=-4.465 degrees ! Estimated noise=934.887 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0702123 Jy ! Component: 100 - total flux cleaned = 0.128813 Jy ! Component: 150 - total flux cleaned = 0.179226 Jy ! Component: 200 - total flux cleaned = 0.223764 Jy ! Total flux subtracted in 200 components = 0.223764 Jy ! Clean residual min=-0.027635 max=0.029405 Jy/beam ! Clean residual mean=0.001241 rms=0.009384 Jy/beam ! Combined flux in latest and established models = 2.80619 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398301 Jy ! Component: 100 - total flux cleaned = 0.0755752 Jy ! Component: 150 - total flux cleaned = 0.107921 Jy ! Component: 200 - total flux cleaned = 0.137416 Jy ! Total flux subtracted in 200 components = 0.137416 Jy ! Clean residual min=-0.021702 max=0.022364 Jy/beam ! Clean residual mean=0.000998 rms=0.007247 Jy/beam ! Combined flux in latest and established models = 2.9436 Jy ! Adding 235 model components to the UV plane model. ! The established model now contains 374 components and 2.9436 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.2 mas, bpa=-11.95 degrees ! Estimated noise=707.754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184523 Jy ! Component: 100 - total flux cleaned = 0.0346261 Jy ! Component: 150 - total flux cleaned = 0.0495849 Jy ! Component: 200 - total flux cleaned = 0.0636229 Jy ! Total flux subtracted in 200 components = 0.0636229 Jy ! Clean residual min=-0.012103 max=0.013483 Jy/beam ! Clean residual mean=0.000403 rms=0.003297 Jy/beam ! Combined flux in latest and established models = 3.00723 Jy selfcal ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 429 components and 3.00723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.026196Jy sigma=0.001721 ! Fit after self-cal, rms=1.026074Jy sigma=0.001714 wmodel J2225-0457_S_2000_12_04_pus_map.mod ! Writing 429 model components to file: J2225-0457_S_2000_12_04_pus_map.mod wobs J2225-0457_S_2000_12_04_pus_uvs.fits ! Writing UV FITS file: J2225-0457_S_2000_12_04_pus_uvs.fits wwins J2225-0457_S_2000_12_04_pus_map.win ! wwins: Wrote 17 windows to J2225-0457_S_2000_12_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=8192 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319222 Jy ! Component: 100 - total flux cleaned = 0.00486384 Jy ! Component: 150 - total flux cleaned = 0.00747709 Jy ! Component: 200 - total flux cleaned = 0.00942234 Jy ! Component: 250 - total flux cleaned = 0.0118849 Jy ! Component: 300 - total flux cleaned = 0.0148507 Jy ! Component: 350 - total flux cleaned = 0.0175732 Jy ! Component: 400 - total flux cleaned = 0.0202467 Jy ! Component: 450 - total flux cleaned = 0.0223485 Jy ! Component: 500 - total flux cleaned = 0.0247621 Jy ! Component: 550 - total flux cleaned = 0.0271403 Jy ! Component: 600 - total flux cleaned = 0.0298262 Jy ! Component: 650 - total flux cleaned = 0.0326406 Jy ! Component: 700 - total flux cleaned = 0.0349296 Jy ! Component: 750 - total flux cleaned = 0.0370308 Jy ! Component: 800 - total flux cleaned = 0.039908 Jy ! Component: 850 - total flux cleaned = 0.0421197 Jy ! Component: 900 - total flux cleaned = 0.0443095 Jy ! Component: 950 - total flux cleaned = 0.0470922 Jy ! Component: 1000 - total flux cleaned = 0.049082 Jy ! Component: 1050 - total flux cleaned = 0.0518058 Jy ! Component: 1100 - total flux cleaned = 0.0536053 Jy ! Component: 1150 - total flux cleaned = 0.0564272 Jy ! Component: 1200 - total flux cleaned = 0.0587802 Jy ! Component: 1250 - total flux cleaned = 0.0609655 Jy ! Component: 1300 - total flux cleaned = 0.0634191 Jy ! Component: 1350 - total flux cleaned = 0.0652786 Jy ! Component: 1400 - total flux cleaned = 0.067688 Jy ! Component: 1450 - total flux cleaned = 0.0700767 Jy ! Component: 1500 - total flux cleaned = 0.0717481 Jy ! Component: 1550 - total flux cleaned = 0.0738206 Jy ! Component: 1600 - total flux cleaned = 0.0753267 Jy ! Component: 1650 - total flux cleaned = 0.0772291 Jy ! Component: 1700 - total flux cleaned = 0.0788472 Jy ! Component: 1750 - total flux cleaned = 0.0812538 Jy ! Component: 1800 - total flux cleaned = 0.0827125 Jy ! Component: 1850 - total flux cleaned = 0.0846879 Jy ! Component: 1900 - total flux cleaned = 0.0861261 Jy ! Component: 1950 - total flux cleaned = 0.0882018 Jy ! Component: 2000 - total flux cleaned = 0.0897468 Jy ! Component: 2050 - total flux cleaned = 0.0919176 Jy ! Component: 2100 - total flux cleaned = 0.0935669 Jy ! Component: 2150 - total flux cleaned = 0.0950795 Jy ! Component: 2200 - total flux cleaned = 0.0964564 Jy ! Component: 2250 - total flux cleaned = 0.0989411 Jy ! Component: 2300 - total flux cleaned = 0.100173 Jy ! Component: 2350 - total flux cleaned = 0.101765 Jy ! Component: 2400 - total flux cleaned = 0.103347 Jy ! Component: 2450 - total flux cleaned = 0.104676 Jy ! Component: 2500 - total flux cleaned = 0.106356 Jy ! Component: 2550 - total flux cleaned = 0.107429 Jy ! Component: 2600 - total flux cleaned = 0.109324 Jy ! Component: 2650 - total flux cleaned = 0.110619 Jy ! Component: 2700 - total flux cleaned = 0.112022 Jy ! Component: 2750 - total flux cleaned = 0.113532 Jy ! Component: 2800 - total flux cleaned = 0.115263 Jy ! Component: 2850 - total flux cleaned = 0.116869 Jy ! Component: 2900 - total flux cleaned = 0.117894 Jy ! Component: 2950 - total flux cleaned = 0.119593 Jy ! Component: 3000 - total flux cleaned = 0.120494 Jy ! Component: 3050 - total flux cleaned = 0.122059 Jy ! Component: 3100 - total flux cleaned = 0.123727 Jy ! Component: 3150 - total flux cleaned = 0.124943 Jy ! Component: 3200 - total flux cleaned = 0.126701 Jy ! Component: 3250 - total flux cleaned = 0.128337 Jy ! Component: 3300 - total flux cleaned = 0.128879 Jy ! Component: 3350 - total flux cleaned = 0.130606 Jy ! Component: 3400 - total flux cleaned = 0.132106 Jy ! Component: 3450 - total flux cleaned = 0.13328 Jy ! Component: 3500 - total flux cleaned = 0.134766 Jy ! Component: 3550 - total flux cleaned = 0.136557 Jy ! Component: 3600 - total flux cleaned = 0.137814 Jy ! Component: 3650 - total flux cleaned = 0.139169 Jy ! Component: 3700 - total flux cleaned = 0.140515 Jy ! Component: 3750 - total flux cleaned = 0.141649 Jy ! Component: 3800 - total flux cleaned = 0.143186 Jy ! Component: 3850 - total flux cleaned = 0.144713 Jy ! Component: 3900 - total flux cleaned = 0.145828 Jy ! Component: 3950 - total flux cleaned = 0.147339 Jy ! Component: 4000 - total flux cleaned = 0.148642 Jy ! Component: 4050 - total flux cleaned = 0.150235 Jy ! Component: 4100 - total flux cleaned = 0.151326 Jy ! Component: 4150 - total flux cleaned = 0.152411 Jy ! Component: 4200 - total flux cleaned = 0.153784 Jy ! Component: 4250 - total flux cleaned = 0.155149 Jy ! Component: 4300 - total flux cleaned = 0.156799 Jy ! Component: 4350 - total flux cleaned = 0.158054 Jy ! Component: 4400 - total flux cleaned = 0.159303 Jy ! Component: 4450 - total flux cleaned = 0.160641 Jy ! Component: 4500 - total flux cleaned = 0.162353 Jy ! Component: 4550 - total flux cleaned = 0.163772 Jy ! Component: 4600 - total flux cleaned = 0.16509 Jy ! Component: 4650 - total flux cleaned = 0.166215 Jy ! Component: 4700 - total flux cleaned = 0.167614 Jy ! Component: 4750 - total flux cleaned = 0.169192 Jy ! Component: 4800 - total flux cleaned = 0.170484 Jy ! Component: 4850 - total flux cleaned = 0.17168 Jy ! Component: 4900 - total flux cleaned = 0.173052 Jy ! Component: 4950 - total flux cleaned = 0.174327 Jy ! Component: 5000 - total flux cleaned = 0.17614 Jy ! Component: 5050 - total flux cleaned = 0.177133 Jy ! Component: 5100 - total flux cleaned = 0.17839 Jy ! Component: 5150 - total flux cleaned = 0.179463 Jy ! Component: 5200 - total flux cleaned = 0.18062 Jy ! Component: 5250 - total flux cleaned = 0.182215 Jy ! Component: 5300 - total flux cleaned = 0.18292 Jy ! Component: 5350 - total flux cleaned = 0.184414 Jy ! Component: 5400 - total flux cleaned = 0.185812 Jy ! Component: 5450 - total flux cleaned = 0.18677 Jy ! Component: 5500 - total flux cleaned = 0.187811 Jy ! Component: 5550 - total flux cleaned = 0.189106 Jy ! Component: 5600 - total flux cleaned = 0.190397 Jy ! Component: 5650 - total flux cleaned = 0.191424 Jy ! Component: 5700 - total flux cleaned = 0.192618 Jy ! Component: 5750 - total flux cleaned = 0.193381 Jy ! Component: 5800 - total flux cleaned = 0.194819 Jy ! Component: 5850 - total flux cleaned = 0.19583 Jy ! Component: 5900 - total flux cleaned = 0.197088 Jy ! Component: 5950 - total flux cleaned = 0.198174 Jy ! Component: 6000 - total flux cleaned = 0.199422 Jy ! Component: 6050 - total flux cleaned = 0.200334 Jy ! Component: 6100 - total flux cleaned = 0.201736 Jy ! Component: 6150 - total flux cleaned = 0.202723 Jy ! Component: 6200 - total flux cleaned = 0.203624 Jy ! Component: 6250 - total flux cleaned = 0.204766 Jy ! Component: 6300 - total flux cleaned = 0.205904 Jy ! Component: 6350 - total flux cleaned = 0.206794 Jy ! Component: 6400 - total flux cleaned = 0.207843 Jy ! Component: 6450 - total flux cleaned = 0.208647 Jy ! Component: 6500 - total flux cleaned = 0.209607 Jy ! Component: 6550 - total flux cleaned = 0.210804 Jy ! Component: 6600 - total flux cleaned = 0.21144 Jy ! Component: 6650 - total flux cleaned = 0.212153 Jy ! Component: 6700 - total flux cleaned = 0.21381 Jy ! Component: 6750 - total flux cleaned = 0.214596 Jy ! Component: 6800 - total flux cleaned = 0.215302 Jy ! Component: 6850 - total flux cleaned = 0.216083 Jy ! Component: 6900 - total flux cleaned = 0.217406 Jy ! Component: 6950 - total flux cleaned = 0.218027 Jy ! Component: 7000 - total flux cleaned = 0.218878 Jy ! Component: 7050 - total flux cleaned = 0.220188 Jy ! Component: 7100 - total flux cleaned = 0.220879 Jy ! Component: 7150 - total flux cleaned = 0.221875 Jy ! Component: 7200 - total flux cleaned = 0.222561 Jy ! Component: 7250 - total flux cleaned = 0.223398 Jy ! Component: 7300 - total flux cleaned = 0.224307 Jy ! Component: 7350 - total flux cleaned = 0.225063 Jy ! Component: 7400 - total flux cleaned = 0.226118 Jy ! Component: 7450 - total flux cleaned = 0.226869 Jy ! Component: 7500 - total flux cleaned = 0.227842 Jy ! Component: 7550 - total flux cleaned = 0.228588 Jy ! Component: 7600 - total flux cleaned = 0.229406 Jy ! Component: 7650 - total flux cleaned = 0.230296 Jy ! Component: 7700 - total flux cleaned = 0.231257 Jy ! Component: 7750 - total flux cleaned = 0.231994 Jy ! Component: 7800 - total flux cleaned = 0.232582 Jy ! Component: 7850 - total flux cleaned = 0.233168 Jy ! Component: 7900 - total flux cleaned = 0.233752 Jy ! Component: 7950 - total flux cleaned = 0.234481 Jy ! Component: 8000 - total flux cleaned = 0.235207 Jy ! Component: 8050 - total flux cleaned = 0.235859 Jy ! Component: 8100 - total flux cleaned = 0.236798 Jy ! Component: 8150 - total flux cleaned = 0.237301 Jy ! Total flux subtracted in 8192 components = 0.23766 Jy ! Clean residual min=-0.003613 max=0.004212 Jy/beam ! Clean residual mean=0.000282 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 3.24489 Jy keep ! Adding 786 model components to the UV plane model. ! The established model now contains 1208 components and 3.24489 Jy ![Exited script file: muppet] wmap "J2225-0457_S_2000_12_04_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 7.2 at -11.95 degrees (North through East) ! Clean map min=-0.0060878 max=1.8 Jy/beam ! Writing clean map to FITS file: J2225-0457_S_2000_12_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.79999 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00132501 device "J2225-0457_S_2000_12_04_pus\_map.eps/VPS" ! Attempting to open device: 'J2225-0457_S_2000_12_04_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.220836 0.220836 0.441672 0.883344 1.76669 3.53337 7.06675 14.1335 28.267 56.534 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0039 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.799 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.954 x 7.2 at -11.95 degrees (North through East) ! Clean map min=-0.0060878 max=1.8 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2225-0457_S_2000_12_04_pus\_map.gif/vgif" ! Attempting to open device: 'J2225-0457_S_2000_12_04_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J2225-0457_S_2000_12_04_pus_uvs.log closed on Thu Oct 18 13:15:25 2007