! Started logfile: J0241-0815_X_2000_12_04_pus_uvs.log on Fri Oct 12 17:12:50 2007 obs J0241-0815_X_2000_12_04_pus_uva.fits ! Reading UV FITS file: J0241-0815_X_2000_12_04_pus_uva.fits ! AN table 1: 22 integrations on 190 of 190 possible baselines. ! AN table 2: 54 integrations on 190 of 190 possible baselines. ! AN table 3: 175 integrations on 190 of 190 possible baselines. ! AN table 4: 24 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.0651292 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0241-0815 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2126 lines of history. ! ! Reading 13612 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0241-0815_X_2000_12_04_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 440 telescope corrections were flagged in sub-array 1. ! A total of 744 telescope corrections were flagged in sub-array 2. ! A total of 3181 telescope corrections were flagged in sub-array 3. ! A total of 265 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 440 telescope corrections were flagged in sub-array 1. ! A total of 744 telescope corrections were flagged in sub-array 2. ! A total of 3181 telescope corrections were flagged in sub-array 3. ! A total of 265 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 440 telescope corrections were flagged in sub-array 1. ! A total of 744 telescope corrections were flagged in sub-array 2. ! A total of 3181 telescope corrections were flagged in sub-array 3. ! A total of 265 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 440 telescope corrections were flagged in sub-array 1. ! A total of 744 telescope corrections were flagged in sub-array 2. ! A total of 3181 telescope corrections were flagged in sub-array 3. ! A total of 265 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.847071Jy sigma=0.008357 ! Fit after self-cal, rms=0.679306Jy sigma=0.006760 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.6093 mas, bmaj=1.78 mas, bpa=-3.479 degrees ! Estimated noise=936.207 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.273006 Jy ! Component: 100 - total flux cleaned = 0.373414 Jy ! Total flux subtracted in 100 components = 0.373414 Jy ! Clean residual min=-0.024270 max=0.070007 Jy/beam ! Clean residual mean=0.001402 rms=0.009085 Jy/beam ! Combined flux in latest and established models = 0.373414 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.373414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296558Jy sigma=0.002972 ! Fit after self-cal, rms=0.296172Jy sigma=0.002969 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (4, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0722956 Jy ! Component: 100 - total flux cleaned = 0.120788 Jy ! Total flux subtracted in 100 components = 0.120788 Jy ! Clean residual min=-0.020080 max=0.057029 Jy/beam ! Clean residual mean=0.001183 rms=0.007492 Jy/beam ! Combined flux in latest and established models = 0.494202 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 27 components and 0.494202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263960Jy sigma=0.002530 ! Fit after self-cal, rms=0.261413Jy sigma=0.002502 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (5, 1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0550602 Jy ! Component: 100 - total flux cleaned = 0.0923787 Jy ! Total flux subtracted in 100 components = 0.0923787 Jy ! Clean residual min=-0.015798 max=0.034931 Jy/beam ! Clean residual mean=0.000996 rms=0.006255 Jy/beam ! Combined flux in latest and established models = 0.586581 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.586581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239516Jy sigma=0.002194 ! Fit after self-cal, rms=0.238442Jy sigma=0.002181 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.7253 mas, bmaj=2.04 mas, bpa=-4.375 degrees ! Estimated noise=635.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0708855 Jy ! Component: 100 - total flux cleaned = 0.119695 Jy ! Component: 150 - total flux cleaned = 0.154814 Jy ! Component: 200 - total flux cleaned = 0.180512 Jy ! Total flux subtracted in 200 components = 0.180512 Jy ! Clean residual min=-0.014415 max=0.055927 Jy/beam ! Clean residual mean=0.003889 rms=0.007819 Jy/beam ! Combined flux in latest and established models = 0.767093 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 68 components and 0.767093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215212Jy sigma=0.001817 ! Fit after self-cal, rms=0.214248Jy sigma=0.001802 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (-2.6, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0507568 Jy ! Component: 100 - total flux cleaned = 0.0796073 Jy ! Component: 150 - total flux cleaned = 0.10181 Jy ! Component: 200 - total flux cleaned = 0.11944 Jy ! Total flux subtracted in 200 components = 0.11944 Jy ! Clean residual min=-0.013559 max=0.041625 Jy/beam ! Clean residual mean=0.002748 rms=0.005778 Jy/beam ! Combined flux in latest and established models = 0.886533 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 98 components and 0.886533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201035Jy sigma=0.001619 ! Fit after self-cal, rms=0.199989Jy sigma=0.001603 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (-6.6, -2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392796 Jy ! Component: 100 - total flux cleaned = 0.0603192 Jy ! Component: 150 - total flux cleaned = 0.0756818 Jy ! Component: 200 - total flux cleaned = 0.0882001 Jy ! Total flux subtracted in 200 components = 0.0882001 Jy ! Clean residual min=-0.011072 max=0.031121 Jy/beam ! Clean residual mean=0.001901 rms=0.004445 Jy/beam ! Combined flux in latest and established models = 0.974733 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 139 components and 0.974733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191886Jy sigma=0.001489 ! Fit after self-cal, rms=0.191277Jy sigma=0.001476 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (6.6, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247622 Jy ! Component: 100 - total flux cleaned = 0.0405221 Jy ! Component: 150 - total flux cleaned = 0.0533844 Jy ! Component: 200 - total flux cleaned = 0.0644015 Jy ! Total flux subtracted in 200 components = 0.0644015 Jy ! Clean residual min=-0.009029 max=0.019286 Jy/beam ! Clean residual mean=0.001303 rms=0.003489 Jy/beam ! Combined flux in latest and established models = 1.03913 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 171 components and 1.03914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187004Jy sigma=0.001419 ! Fit after self-cal, rms=0.186876Jy sigma=0.001417 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (1, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175394 Jy ! Component: 100 - total flux cleaned = 0.0280045 Jy ! Component: 150 - total flux cleaned = 0.0350549 Jy ! Component: 200 - total flux cleaned = 0.0394306 Jy ! Total flux subtracted in 200 components = 0.0394306 Jy ! Clean residual min=-0.009178 max=0.016339 Jy/beam ! Clean residual mean=0.000949 rms=0.003195 Jy/beam ! Combined flux in latest and established models = 1.07857 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 193 components and 1.07857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184745Jy sigma=0.001390 ! Fit after self-cal, rms=0.184627Jy sigma=0.001388 ! Inverting map ! Your choice of large map pixels excluded 1.13% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 69 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.98 GC 3.63 GG 1.00* ! HH 1.00* HN 1.03 KK 1.06 KP 0.95 ! LA 0.94 MA 1.00* MC 1.00* MK 0.99 ! NL 1.12 NY 1.00* OV 1.06 PT 1.08 ! SC 1.05 TS 1.00* WF 0.98 WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.01 GC 1.00 GG 1.00* ! HH 1.00* HN 1.00* KK 1.06 KP 1.10 ! LA 0.98 MA 1.00* MC 1.00* MK 1.07 ! NL 1.10 NY 1.00* OV 1.01 PT 1.01 ! SC 1.00* TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.93 GC 1.00* GG 1.00* ! HH 1.00* HN 0.98 KK 1.00* KP 0.96 ! LA 1.02 MA 1.00* MC 1.00* MK 1.00* ! NL 1.12 NY 1.00* OV 0.96 PT 1.04 ! SC 1.00 TS 1.00* WF 0.97 WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 69 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.01 GC 4.00 GG 1.00* ! HH 1.00* HN 1.04 KK 1.12 KP 1.01 ! LA 0.93 MA 1.00* MC 1.00* MK 0.97 ! NL 1.07 NY 1.00* OV 1.00 PT 1.08 ! SC 1.06 TS 1.00* WF 0.97 WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.05 GC 1.11 GG 1.00* ! HH 1.00* HN 1.00* KK 1.05 KP 1.09 ! LA 0.98 MA 1.00* MC 1.00* MK 1.06 ! NL 1.01 NY 1.00* OV 1.01 PT 1.00 ! SC 1.00* TS 1.10 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.96 GC 1.00* GG 1.00* ! HH 1.00* HN 0.97 KK 1.00* KP 0.97 ! LA 1.00 MA 1.00* MC 1.00* MK 1.00* ! NL 1.04 NY 1.00* OV 0.95 PT 1.05 ! SC 0.93 TS 1.00* WF 0.96 WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 69 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.03 GC 3.48 GG 1.00* ! HH 1.00* HN 1.03 KK 1.04 KP 0.94 ! LA 0.94 MA 1.00* MC 1.00* MK 0.99 ! NL 1.05 NY 1.00* OV 0.96 PT 1.02 ! SC 0.93 TS 1.00* WF 1.00 WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.08 GC 1.07 GG 1.00* ! HH 1.00* HN 1.00* KK 1.02 KP 1.08 ! LA 0.98 MA 1.00* MC 1.00* MK 1.03 ! NL 1.01 NY 1.00* OV 0.94 PT 0.98 ! SC 1.00* TS 0.96 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 0.99 GC 1.00* GG 1.00* ! HH 1.00* HN 0.96 KK 1.00* KP 0.94 ! LA 1.02 MA 1.00* MC 1.00* MK 1.00* ! NL 1.01 NY 1.00* OV 0.94 PT 0.99 ! SC 0.99 TS 1.00* WF 0.97 WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! LA 0.00* MA 0.00* MC 0.00* MK 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 69 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.05 GC 3.51 GG 1.00* ! HH 1.00* HN 1.00 KK 1.05 KP 0.97 ! LA 0.92 MA 1.00* MC 1.00* MK 1.01 ! NL 1.02 NY 1.00* OV 0.99 PT 1.01 ! SC 0.90 TS 1.00* WF 0.95 WZ 1.00* ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.04 GC 1.03 GG 1.00* ! HH 1.00* HN 1.00* KK 1.01 KP 1.08 ! LA 0.97 MA 1.00* MC 1.00* MK 1.03 ! NL 1.02 NY 1.00* OV 1.03 PT 0.97 ! SC 1.00* TS 1.01 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.99 GC 1.00* GG 1.00* ! HH 1.00* HN 0.94 KK 1.00* KP 0.97 ! LA 1.00 MA 1.00* MC 1.00* MK 1.00* ! NL 1.03 NY 1.00* OV 0.91 PT 0.98 ! SC 0.96 TS 1.00* WF 0.94 WZ 1.00* ! ! ! Fit before self-cal, rms=0.184627Jy sigma=0.001388 ! Fit after self-cal, rms=0.334192Jy sigma=0.001324 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.7298 mas, bmaj=2.377 mas, bpa=-4.459 degrees ! Estimated noise=649.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.6, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110264 Jy ! Component: 100 - total flux cleaned = 0.0146081 Jy ! Component: 150 - total flux cleaned = 0.016483 Jy ! Component: 200 - total flux cleaned = 0.01837 Jy ! Total flux subtracted in 200 components = 0.01837 Jy ! Clean residual min=-0.006498 max=0.011282 Jy/beam ! Clean residual mean=0.000424 rms=0.001949 Jy/beam ! Combined flux in latest and established models = 1.09694 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 228 components and 1.09694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333612Jy sigma=0.001307 ! Fit after self-cal, rms=0.334210Jy sigma=0.001305 ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (-14, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106908 Jy ! Component: 100 - total flux cleaned = 0.015777 Jy ! Component: 150 - total flux cleaned = 0.0185138 Jy ! Component: 200 - total flux cleaned = 0.020345 Jy ! Total flux subtracted in 200 components = 0.020345 Jy ! Clean residual min=-0.005855 max=0.009865 Jy/beam ! Clean residual mean=0.000248 rms=0.001598 Jy/beam ! Combined flux in latest and established models = 1.11728 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 243 components and 1.11728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333793Jy sigma=0.001293 ! Fit after self-cal, rms=0.333819Jy sigma=0.001293 ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Added new window around map position (3, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510369 Jy ! Component: 100 - total flux cleaned = 0.0064179 Jy ! Component: 150 - total flux cleaned = 0.00738316 Jy ! Component: 200 - total flux cleaned = 0.00772989 Jy ! Total flux subtracted in 200 components = 0.00772989 Jy ! Clean residual min=-0.005458 max=0.006577 Jy/beam ! Clean residual mean=0.000171 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 1.12501 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 255 components and 1.12501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333558Jy sigma=0.001285 ! Fit after self-cal, rms=0.333553Jy sigma=0.001285 ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333553Jy sigma=0.001285 ! Fit after self-cal, rms=0.345154Jy sigma=0.001282 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.7289 mas, bmaj=2.375 mas, bpa=-4.388 degrees ! Estimated noise=646.747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348394 Jy ! Component: 100 - total flux cleaned = 0.00619355 Jy ! Component: 150 - total flux cleaned = 0.0081096 Jy ! Component: 200 - total flux cleaned = 0.00938697 Jy ! Total flux subtracted in 200 components = 0.00938697 Jy ! Clean residual min=-0.004950 max=0.006159 Jy/beam ! Clean residual mean=0.000133 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 1.1344 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 269 components and 1.1344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344975Jy sigma=0.001277 ! Fit after self-cal, rms=0.345011Jy sigma=0.001277 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.4, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00524379 Jy ! Component: 100 - total flux cleaned = 0.00574982 Jy ! Component: 150 - total flux cleaned = 0.00620418 Jy ! Component: 200 - total flux cleaned = 0.00662325 Jy ! Total flux subtracted in 200 components = 0.00662325 Jy ! Clean residual min=-0.004562 max=0.004680 Jy/beam ! Clean residual mean=0.000075 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 1.14102 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 293 components and 1.14102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344867Jy sigma=0.001272 ! Fit after self-cal, rms=0.344885Jy sigma=0.001272 ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344885Jy sigma=0.001272 ! Fit after self-cal, rms=0.347678Jy sigma=0.001271 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.7285 mas, bmaj=2.373 mas, bpa=-4.344 degrees ! Estimated noise=645.456 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299567 Jy ! Component: 100 - total flux cleaned = 0.00503817 Jy ! Component: 150 - total flux cleaned = 0.00584528 Jy ! Component: 200 - total flux cleaned = 0.00622663 Jy ! Total flux subtracted in 200 components = 0.00622663 Jy ! Clean residual min=-0.004240 max=0.004558 Jy/beam ! Clean residual mean=0.000063 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 1.14725 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 305 components and 1.14725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347562Jy sigma=0.001268 ! Fit after self-cal, rms=0.347592Jy sigma=0.001268 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132717 Jy ! Component: 100 - total flux cleaned = 0.00168673 Jy ! Component: 150 - total flux cleaned = 0.00191748 Jy ! Component: 200 - total flux cleaned = 0.00224875 Jy ! Total flux subtracted in 200 components = 0.00224875 Jy ! Clean residual min=-0.004081 max=0.004145 Jy/beam ! Clean residual mean=0.000043 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 1.1495 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 317 components and 1.1495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347501Jy sigma=0.001266 ! Fit after self-cal, rms=0.347513Jy sigma=0.001266 ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.347513Jy sigma=0.001266 ! Fit after self-cal, rms=0.349390Jy sigma=0.001266 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=2.277 mas, bmaj=3.868 mas, bpa=1.146 degrees ! Estimated noise=796.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00327413 Jy ! Component: 100 - total flux cleaned = 0.00530837 Jy ! Component: 150 - total flux cleaned = 0.00633483 Jy ! Component: 200 - total flux cleaned = 0.00701409 Jy ! Total flux subtracted in 200 components = 0.00701409 Jy ! Clean residual min=-0.003669 max=0.004604 Jy/beam ! Clean residual mean=0.000011 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 1.15651 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 343 components and 1.15651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349308Jy sigma=0.001265 ! Fit after self-cal, rms=0.349294Jy sigma=0.001265 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00070999 Jy ! Component: 100 - total flux cleaned = 0.00131468 Jy ! Component: 150 - total flux cleaned = 0.00194845 Jy ! Component: 200 - total flux cleaned = 0.00236492 Jy ! Total flux subtracted in 200 components = 0.00236492 Jy ! Clean residual min=-0.003604 max=0.004319 Jy/beam ! Clean residual mean=-0.000038 rms=0.001128 Jy/beam ! Combined flux in latest and established models = 1.15888 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 355 components and 1.15888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349249Jy sigma=0.001264 ! Fit after self-cal, rms=0.349229Jy sigma=0.001264 ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.7286 mas, bmaj=2.373 mas, bpa=-4.332 degrees ! Estimated noise=644.862 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7286 x 2.373 at -4.332 degrees (North through East) ! Clean map min=-0.0035512 max=0.37326 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.6055 mas, bmaj=2.007 mas, bpa=-3.524 degrees ! Estimated noise=962.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278457 Jy ! Component: 100 - total flux cleaned = 0.39418 Jy ! Component: 150 - total flux cleaned = 0.474795 Jy ! Component: 200 - total flux cleaned = 0.536601 Jy ! Total flux subtracted in 200 components = 0.536601 Jy ! Clean residual min=-0.016178 max=0.037051 Jy/beam ! Clean residual mean=0.001111 rms=0.006637 Jy/beam ! Combined flux in latest and established models = 0.536601 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.536601 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.7286 mas, bmaj=2.373 mas, bpa=-4.332 degrees ! Estimated noise=644.862 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0919978 Jy ! Component: 100 - total flux cleaned = 0.161557 Jy ! Component: 150 - total flux cleaned = 0.21743 Jy ! Component: 200 - total flux cleaned = 0.262984 Jy ! Total flux subtracted in 200 components = 0.262984 Jy ! Clean residual min=-0.009606 max=0.027552 Jy/beam ! Clean residual mean=0.003524 rms=0.006074 Jy/beam ! Combined flux in latest and established models = 0.799585 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 71 components and 0.799585 Jy ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0375854 Jy ! Component: 100 - total flux cleaned = 0.0690342 Jy ! Component: 150 - total flux cleaned = 0.0957906 Jy ! Component: 200 - total flux cleaned = 0.118818 Jy ! Total flux subtracted in 200 components = 0.118818 Jy ! Clean residual min=-0.007058 max=0.014953 Jy/beam ! Clean residual mean=0.002314 rms=0.003702 Jy/beam ! Combined flux in latest and established models = 0.918403 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 146 components and 0.918403 Jy ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=2.277 mas, bmaj=3.868 mas, bpa=1.146 degrees ! Estimated noise=796.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397233 Jy ! Component: 100 - total flux cleaned = 0.0701561 Jy ! Component: 150 - total flux cleaned = 0.0945017 Jy ! Component: 200 - total flux cleaned = 0.114761 Jy ! Total flux subtracted in 200 components = 0.114761 Jy ! Clean residual min=-0.006959 max=0.012595 Jy/beam ! Clean residual mean=0.002701 rms=0.003895 Jy/beam ! Combined flux in latest and established models = 1.03316 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170804 Jy ! Component: 100 - total flux cleaned = 0.0316005 Jy ! Component: 150 - total flux cleaned = 0.0440118 Jy ! Component: 200 - total flux cleaned = 0.0546756 Jy ! Total flux subtracted in 200 components = 0.0546756 Jy ! Clean residual min=-0.004747 max=0.007561 Jy/beam ! Clean residual mean=0.001530 rms=0.002344 Jy/beam ! Combined flux in latest and established models = 1.08784 Jy ! Adding 190 model components to the UV plane model. ! The established model now contains 313 components and 1.08784 Jy ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! Estimated beam: bmin=0.7286 mas, bmaj=2.373 mas, bpa=-4.332 degrees ! Estimated noise=644.862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00753426 Jy ! Component: 100 - total flux cleaned = 0.0136399 Jy ! Component: 150 - total flux cleaned = 0.0189651 Jy ! Component: 200 - total flux cleaned = 0.0237825 Jy ! Total flux subtracted in 200 components = 0.0237825 Jy ! Clean residual min=-0.004009 max=0.005822 Jy/beam ! Clean residual mean=0.000438 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 1.11162 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 347 components and 1.11162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349463Jy sigma=0.001269 ! Fit after self-cal, rms=0.349465Jy sigma=0.001267 wmodel J0241-0815_X_2000_12_04_pus_map.mod ! Writing 347 model components to file: J0241-0815_X_2000_12_04_pus_map.mod wobs J0241-0815_X_2000_12_04_pus_uvs.fits ! Writing UV FITS file: J0241-0815_X_2000_12_04_pus_uvs.fits wwins J0241-0815_X_2000_12_04_pus_map.win ! wwins: Wrote 11 windows to J0241-0815_X_2000_12_04_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239357 Jy ! Component: 100 - total flux cleaned = 0.004367 Jy ! Component: 150 - total flux cleaned = 0.00615413 Jy ! Component: 200 - total flux cleaned = 0.00765579 Jy ! Component: 250 - total flux cleaned = 0.00897555 Jy ! Component: 300 - total flux cleaned = 0.0103249 Jy ! Component: 350 - total flux cleaned = 0.0115159 Jy ! Component: 400 - total flux cleaned = 0.0127406 Jy ! Component: 450 - total flux cleaned = 0.013818 Jy ! Component: 500 - total flux cleaned = 0.0148721 Jy ! Component: 550 - total flux cleaned = 0.015733 Jy ! Component: 600 - total flux cleaned = 0.0166341 Jy ! Component: 650 - total flux cleaned = 0.0175184 Jy ! Component: 700 - total flux cleaned = 0.0184404 Jy ! Component: 750 - total flux cleaned = 0.0192402 Jy ! Component: 800 - total flux cleaned = 0.0200792 Jy ! Component: 850 - total flux cleaned = 0.0207504 Jy ! Component: 900 - total flux cleaned = 0.0216145 Jy ! Component: 950 - total flux cleaned = 0.022215 Jy ! Component: 1000 - total flux cleaned = 0.0229067 Jy ! Component: 1050 - total flux cleaned = 0.0234422 Jy ! Component: 1100 - total flux cleaned = 0.0240676 Jy ! Component: 1150 - total flux cleaned = 0.0247311 Jy ! Component: 1200 - total flux cleaned = 0.025152 Jy ! Component: 1250 - total flux cleaned = 0.0257062 Jy ! Component: 1300 - total flux cleaned = 0.0261169 Jy ! Component: 1350 - total flux cleaned = 0.0266127 Jy ! Component: 1400 - total flux cleaned = 0.0270131 Jy ! Component: 1450 - total flux cleaned = 0.0274963 Jy ! Component: 1500 - total flux cleaned = 0.0277141 Jy ! Component: 1550 - total flux cleaned = 0.0281445 Jy ! Component: 1600 - total flux cleaned = 0.0285279 Jy ! Component: 1650 - total flux cleaned = 0.028865 Jy ! Component: 1700 - total flux cleaned = 0.0292818 Jy ! Component: 1750 - total flux cleaned = 0.0295708 Jy ! Component: 1800 - total flux cleaned = 0.0298983 Jy ! Component: 1850 - total flux cleaned = 0.0302633 Jy ! Component: 1900 - total flux cleaned = 0.030545 Jy ! Component: 1950 - total flux cleaned = 0.0308238 Jy ! Component: 2000 - total flux cleaned = 0.0311006 Jy ! Total flux subtracted in 2048 components = 0.031453 Jy ! Clean residual min=-0.002479 max=0.002026 Jy/beam ! Clean residual mean=0.000177 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 1.14308 Jy keep ! Adding 155 model components to the UV plane model. ! The established model now contains 494 components and 1.14307 Jy ![Exited script file: muppet] wmap "J0241-0815_X_2000_12_04_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7286 x 2.373 at -4.332 degrees (North through East) ! Clean map min=-0.0036026 max=0.37784 Jy/beam ! Writing clean map to FITS file: J0241-0815_X_2000_12_04_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.377838 invert ! Inverting map ! Your choice of large map pixels excluded 1.16% of the data. ! The x-axis pixel size should ideally be below 0.1916 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00073816 device "J0241-0815_X_2000_12_04_pus\_map.eps/VPS" ! Attempting to open device: 'J0241-0815_X_2000_12_04_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.586093 0.586093 1.17219 2.34437 4.68874 9.37748 18.755 37.5099 75.0199 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.377 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7286 x 2.373 at -4.332 degrees (North through East) ! Clean map min=-0.0036026 max=0.37784 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0241-0815_X_2000_12_04_pus\_map.gif/vgif" ! Attempting to open device: 'J0241-0815_X_2000_12_04_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0241-0815_X_2000_12_04_pus_uvs.log closed on Fri Oct 12 17:13:04 2007