! Started logfile: 1611+343_X.log on Wed Aug 13 12:09:03 2008
observe 1611+343_X.edt
! Reading UV FITS file: 1611+343_X.edt
! AN table 1: 14 integrations on 171 of 171 possible baselines.
! AN table 2: 36 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.236959 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 1611+343
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1526 lines of history.
! 
! Reading 8104 visibilities.
![@gonzo6-0.1 1611+343_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 447 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 447 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 447 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 190 telescope corrections were flagged in sub-array 1.
!  A total of 447 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.377970Jy  sigma=20.339706
! Fit after  self-cal, rms=1.377897Jy  sigma=20.358283
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5238 mas, bmaj=0.928 mas, bpa=-5.261 degrees
! Estimated noise=1.22814 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.62123 Jy
! Total flux subtracted in 50 components = 1.62123 Jy
! Clean residual min=-0.097865 max=0.452193 Jy/beam
! Clean residual mean=0.001368 rms=0.029980 Jy/beam
! Combined flux in latest and established models = 1.62123 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.62123 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.898353Jy  sigma=13.332472
! Fit after  self-cal, rms=0.898350Jy  sigma=13.332468
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.390674 Jy
! Total flux subtracted in 50 components = 0.390674 Jy
! Clean residual min=-0.077652 max=0.240971 Jy/beam
! Clean residual mean=0.001170 rms=0.022916 Jy/beam
! Combined flux in latest and established models = 2.0119 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 2.0119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.709060Jy  sigma=10.557634
! Fit after  self-cal, rms=0.708107Jy  sigma=10.553934
! Inverting map 
! Added new window around map position (0.4, -2.9).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.236009 Jy
! Total flux subtracted in 50 components = 0.236009 Jy
! Clean residual min=-0.068686 max=0.122730 Jy/beam
! Clean residual mean=0.000978 rms=0.019426 Jy/beam
! Combined flux in latest and established models = 2.24791 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 17 components and 2.24791 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.614626Jy  sigma=9.072137
! Fit after  self-cal, rms=0.609162Jy  sigma=9.010375
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167993 Jy
! Total flux subtracted in 50 components = 0.167993 Jy
! Clean residual min=-0.061735 max=0.095387 Jy/beam
! Clean residual mean=0.000850 rms=0.017139 Jy/beam
! Combined flux in latest and established models = 2.4159 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 23 components and 2.4159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.551730Jy  sigma=8.087106
! Fit after  self-cal, rms=0.549140Jy  sigma=8.059635
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127074 Jy
! Total flux subtracted in 50 components = 0.127074 Jy
! Clean residual min=-0.059144 max=0.089729 Jy/beam
! Clean residual mean=0.000753 rms=0.015766 Jy/beam
! Combined flux in latest and established models = 2.54298 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 34 components and 2.54298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.511046Jy  sigma=7.426073
! Fit after  self-cal, rms=0.509537Jy  sigma=7.410401
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5983 mas, bmaj=1.104 mas, bpa=-3.928 degrees
! Estimated noise=0.795714 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204048 Jy
! Component: 100  -  total flux cleaned = 0.339015 Jy
! Total flux subtracted in 100 components = 0.339015 Jy
! Clean residual min=-0.042013 max=0.109970 Jy/beam
! Clean residual mean=0.007132 rms=0.017193 Jy/beam
! Combined flux in latest and established models = 2.88199 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 60 components and 2.88199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.434618Jy  sigma=6.157153
! Fit after  self-cal, rms=0.430288Jy  sigma=6.042825
! Inverting map 
! Added new window around map position (-0.5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123307 Jy
! Component: 100  -  total flux cleaned = 0.203588 Jy
! Total flux subtracted in 100 components = 0.203588 Jy
! Clean residual min=-0.039303 max=0.092330 Jy/beam
! Clean residual mean=0.005093 rms=0.013646 Jy/beam
! Combined flux in latest and established models = 3.08558 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 85 components and 3.08558 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.396388Jy  sigma=5.562680
! Fit after  self-cal, rms=0.394800Jy  sigma=5.498710
! Inverting map 
! Added new window around map position (1.8, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0963908 Jy
! Component: 100  -  total flux cleaned = 0.159641 Jy
! Total flux subtracted in 100 components = 0.159641 Jy
! Clean residual min=-0.034061 max=0.048002 Jy/beam
! Clean residual mean=0.003505 rms=0.011069 Jy/beam
! Combined flux in latest and established models = 3.24522 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 109 components and 3.24522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.371142Jy  sigma=5.124386
! Fit after  self-cal, rms=0.369949Jy  sigma=5.090758
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     GC        1.12     HH        1.00*    
!   HN        0.95     KK        1.00*    KP        1.09     LA        0.95     
!   MA        0.99     MK        1.00*    NL        0.96     NY        1.03     
!   OV        1.00*    PT        1.00     SC        0.99     TS        1.00*    
!   WF        1.05     WZ        1.00*    GG        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        0.88     GC        1.00     HH        1.00*    
!   HN        1.11     KK        1.16     KP        1.08     LA        0.87     
!   MA        1.02     MK        1.03     NL        1.12     NY        0.94     
!   OV        0.97     PT        0.86     SC        1.21     TS        1.04     
!   WF        0.93     WZ        0.92     GG        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     GC        1.11     HH        1.00*    
!   HN        0.93     KK        1.00*    KP        1.08     LA        0.95     
!   MA        1.00     MK        1.00*    NL        0.95     NY        0.99     
!   OV        1.00*    PT        1.03     SC        1.00     TS        1.00*    
!   WF        0.96     WZ        1.00*    GG        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     FD        0.94     GC        1.01     HH        1.00*    
!   HN        1.02     KK        1.17     KP        0.96     LA        0.86     
!   MA        1.01     MK        0.95     NL        0.94     NY        0.93     
!   OV        1.02     PT        1.04     SC        1.05     TS        0.91     
!   WF        0.93     WZ        1.00     GG        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     GC        1.17     HH        1.00*    
!   HN        0.96     KK        1.00*    KP        1.07     LA        0.93     
!   MA        1.00     MK        1.00*    NL        1.00     NY        1.02     
!   OV        1.00*    PT        1.03     SC        0.97     TS        1.00*    
!   WF        1.10     WZ        1.00*    GG        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     FD        0.97     GC        1.02     HH        1.00*    
!   HN        0.87     KK        1.13     KP        0.86     LA        1.03     
!   MA        1.11     MK        1.02     NL        1.04     NY        1.00     
!   OV        0.93     PT        0.96     SC        0.92     TS        0.92     
!   WF        0.93     WZ        0.96     GG        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     GC        1.13     HH        1.00*    
!   HN        0.92     KK        1.00*    KP        1.10     LA        0.92     
!   MA        1.11     MK        1.00*    NL        0.95     NY        1.00     
!   OV        1.00*    PT        1.06     SC        1.02     TS        1.00*    
!   WF        1.25     WZ        1.00*    GG        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.08     GC        1.01     HH        1.00*    
!   HN        0.91     KK        1.11     KP        0.87     LA        1.24     
!   MA        0.93     MK        1.06     NL        1.04     NY        0.94     
!   OV        1.02     PT        0.97     SC        0.97     TS        0.96     
!   WF        0.94     WZ        0.98     GG        1.00*    
! 
! 
! Fit before self-cal, rms=0.369949Jy  sigma=5.090758
! Fit after  self-cal, rms=0.272444Jy  sigma=2.867918
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.597 mas, bmaj=1.106 mas, bpa=-3.51 degrees
! Estimated noise=0.784584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0488222 Jy
! Component: 100  -  total flux cleaned = 0.08329 Jy
! Total flux subtracted in 100 components = 0.08329 Jy
! Clean residual min=-0.023451 max=0.031297 Jy/beam
! Clean residual mean=0.002053 rms=0.005825 Jy/beam
! Combined flux in latest and established models = 3.32851 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 131 components and 3.32851 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.262405Jy  sigma=2.730065
! Fit after  self-cal, rms=0.261958Jy  sigma=2.711932
! Inverting map 
! Added new window around map position (-2.5, -3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.028786 Jy
! Component: 100  -  total flux cleaned = 0.0405315 Jy
! Total flux subtracted in 100 components = 0.0405315 Jy
! Clean residual min=-0.022170 max=0.023255 Jy/beam
! Clean residual mean=0.001641 rms=0.005359 Jy/beam
! Combined flux in latest and established models = 3.36904 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 142 components and 3.36904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.256095Jy  sigma=2.648190
! Fit after  self-cal, rms=0.255842Jy  sigma=2.641419
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.4, 11.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192076 Jy
! Component: 100  -  total flux cleaned = 0.0297342 Jy
! Total flux subtracted in 100 components = 0.0297342 Jy
! Clean residual min=-0.021781 max=0.021569 Jy/beam
! Clean residual mean=0.001377 rms=0.005095 Jy/beam
! Combined flux in latest and established models = 3.39878 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 156 components and 3.39878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.252037Jy  sigma=2.601431
! Fit after  self-cal, rms=0.237458Jy  sigma=2.402015
! Inverting map and beam 
! Estimated beam: bmin=0.5943 mas, bmaj=1.106 mas, bpa=-3.477 degrees
! Estimated noise=0.787385 mJy/beam.
! Added new window around map position (0.6, -4.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0295296 Jy
! Component: 100  -  total flux cleaned = 0.0416549 Jy
! Total flux subtracted in 100 components = 0.0416549 Jy
! Clean residual min=-0.015173 max=0.017866 Jy/beam
! Clean residual mean=0.001571 rms=0.004136 Jy/beam
! Combined flux in latest and established models = 3.44043 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 170 components and 3.44043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.232378Jy  sigma=2.354747
! Fit after  self-cal, rms=0.229882Jy  sigma=2.323293
! Inverting map and beam 
! Estimated beam: bmin=0.5927 mas, bmaj=1.106 mas, bpa=-3.388 degrees
! Estimated noise=0.788473 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0214795 Jy
! Component: 100  -  total flux cleaned = 0.0316461 Jy
! Total flux subtracted in 100 components = 0.0316461 Jy
! Clean residual min=-0.013700 max=0.016782 Jy/beam
! Clean residual mean=0.001489 rms=0.003789 Jy/beam
! Combined flux in latest and established models = 3.47208 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 180 components and 3.47208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.226187Jy  sigma=2.292726
! Fit after  self-cal, rms=0.224845Jy  sigma=2.276247
! Inverting map and beam 
! Estimated beam: bmin=0.5915 mas, bmaj=1.105 mas, bpa=-3.307 degrees
! Estimated noise=0.789698 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184393 Jy
! Component: 100  -  total flux cleaned = 0.0273533 Jy
! Total flux subtracted in 100 components = 0.0273533 Jy
! Clean residual min=-0.012571 max=0.016012 Jy/beam
! Clean residual mean=0.001428 rms=0.003534 Jy/beam
! Combined flux in latest and established models = 3.49943 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 190 components and 3.49943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222035Jy  sigma=2.252351
! Fit after  self-cal, rms=0.221130Jy  sigma=2.242306
! Inverting map and beam 
! Estimated beam: bmin=0.5903 mas, bmaj=1.104 mas, bpa=-3.244 degrees
! Estimated noise=0.790817 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170492 Jy
! Component: 100  -  total flux cleaned = 0.0255925 Jy
! Total flux subtracted in 100 components = 0.0255925 Jy
! Clean residual min=-0.011677 max=0.015378 Jy/beam
! Clean residual mean=0.001364 rms=0.003329 Jy/beam
! Combined flux in latest and established models = 3.52502 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 196 components and 3.52502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.218824Jy  sigma=2.223900
! Fit after  self-cal, rms=0.218172Jy  sigma=2.217004
! Inverting map and beam 
! Estimated beam: bmin=0.5892 mas, bmaj=1.104 mas, bpa=-3.192 degrees
! Estimated noise=0.791864 mJy/beam.
! Added new window around map position (14.8, -8.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180561 Jy
! Component: 100  -  total flux cleaned = 0.0255289 Jy
! Total flux subtracted in 100 components = 0.0255289 Jy
! Clean residual min=-0.010900 max=0.015273 Jy/beam
! Clean residual mean=0.001307 rms=0.003116 Jy/beam
! Combined flux in latest and established models = 3.55055 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 203 components and 3.55055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216035Jy  sigma=2.199150
! Fit after  self-cal, rms=0.215436Jy  sigma=2.193479
! Inverting map and beam 
! Estimated beam: bmin=0.5883 mas, bmaj=1.103 mas, bpa=-3.147 degrees
! Estimated noise=0.792721 mJy/beam.
! Added new window around map position (2.6, -10.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170364 Jy
! Component: 100  -  total flux cleaned = 0.0286835 Jy
! Total flux subtracted in 100 components = 0.0286835 Jy
! Clean residual min=-0.009965 max=0.013051 Jy/beam
! Clean residual mean=0.001178 rms=0.002947 Jy/beam
! Combined flux in latest and established models = 3.57924 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 214 components and 3.57924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.213532Jy  sigma=2.174760
! Fit after  self-cal, rms=0.213191Jy  sigma=2.171353
! Inverting map and beam 
! Estimated beam: bmin=0.5874 mas, bmaj=1.103 mas, bpa=-3.114 degrees
! Estimated noise=0.793367 mJy/beam.
! Added new window around map position (3.7, -16.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152602 Jy
! Component: 100  -  total flux cleaned = 0.0243912 Jy
! Total flux subtracted in 100 components = 0.0243912 Jy
! Clean residual min=-0.009902 max=0.012447 Jy/beam
! Clean residual mean=0.001111 rms=0.002810 Jy/beam
! Combined flux in latest and established models = 3.60363 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 221 components and 3.60363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.211594Jy  sigma=2.157992
! Fit after  self-cal, rms=0.211367Jy  sigma=2.155353
! Inverting map and beam 
! Estimated beam: bmin=0.5866 mas, bmaj=1.102 mas, bpa=-3.085 degrees
! Estimated noise=0.793886 mJy/beam.
! Added new window around map position (3.4, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0144296 Jy
! Component: 100  -  total flux cleaned = 0.0230855 Jy
! Total flux subtracted in 100 components = 0.0230855 Jy
! Clean residual min=-0.009508 max=0.011576 Jy/beam
! Clean residual mean=0.001057 rms=0.002687 Jy/beam
! Combined flux in latest and established models = 3.62671 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 230 components and 3.62671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.209907Jy  sigma=2.141940
! Fit after  self-cal, rms=0.209681Jy  sigma=2.139657
! Inverting map and beam 
! Estimated beam: bmin=0.586 mas, bmaj=1.102 mas, bpa=-3.062 degrees
! Estimated noise=0.794342 mJy/beam.
! Added new window around map position (2.9, -3.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134368 Jy
! Component: 100  -  total flux cleaned = 0.0206453 Jy
! Total flux subtracted in 100 components = 0.0206453 Jy
! Clean residual min=-0.009001 max=0.011270 Jy/beam
! Clean residual mean=0.001015 rms=0.002560 Jy/beam
! Combined flux in latest and established models = 3.64736 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 242 components and 3.64736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.208430Jy  sigma=2.129283
! Fit after  self-cal, rms=0.208319Jy  sigma=2.127495
! Inverting map and beam 
! Estimated beam: bmin=0.5853 mas, bmaj=1.101 mas, bpa=-3.042 degrees
! Estimated noise=0.794923 mJy/beam.
! Added new window around map position (4.2, -18.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0127361 Jy
! Component: 100  -  total flux cleaned = 0.0200078 Jy
! Total flux subtracted in 100 components = 0.0200078 Jy
! Clean residual min=-0.008475 max=0.010681 Jy/beam
! Clean residual mean=0.000977 rms=0.002449 Jy/beam
! Combined flux in latest and established models = 3.66737 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 248 components and 3.66737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.207212Jy  sigma=2.116810
! Fit after  self-cal, rms=0.207140Jy  sigma=2.115188
! Inverting map and beam 
! Estimated beam: bmin=0.5848 mas, bmaj=1.101 mas, bpa=-3.024 degrees
! Estimated noise=0.795494 mJy/beam.
! Added new window around map position (-0.8, -1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0117374 Jy
! Component: 100  -  total flux cleaned = 0.0177738 Jy
! Total flux subtracted in 100 components = 0.0177738 Jy
! Clean residual min=-0.008341 max=0.010015 Jy/beam
! Clean residual mean=0.000944 rms=0.002354 Jy/beam
! Combined flux in latest and established models = 3.68514 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 254 components and 3.68514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206168Jy  sigma=2.106375
! Fit after  self-cal, rms=0.206079Jy  sigma=2.104798
! Inverting map and beam 
! Estimated beam: bmin=0.5843 mas, bmaj=1.1 mas, bpa=-3.001 degrees
! Estimated noise=0.796115 mJy/beam.
! Added new window around map position (-11.8, -24.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112774 Jy
! Component: 100  -  total flux cleaned = 0.0180876 Jy
! Total flux subtracted in 100 components = 0.0180876 Jy
! Clean residual min=-0.008021 max=0.009127 Jy/beam
! Clean residual mean=0.000902 rms=0.002258 Jy/beam
! Combined flux in latest and established models = 3.70323 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 261 components and 3.70323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205178Jy  sigma=2.097038
! Fit after  self-cal, rms=0.205178Jy  sigma=2.095993
! Inverting map and beam 
! Estimated beam: bmin=0.5838 mas, bmaj=1.1 mas, bpa=-2.979 degrees
! Estimated noise=0.796596 mJy/beam.
! Added new window around map position (-14, 3.1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103769 Jy
! Component: 100  -  total flux cleaned = 0.0150725 Jy
! Total flux subtracted in 100 components = 0.0150725 Jy
! Clean residual min=-0.007718 max=0.008906 Jy/beam
! Clean residual mean=0.000877 rms=0.002187 Jy/beam
! Combined flux in latest and established models = 3.7183 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 272 components and 3.7183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.204368Jy  sigma=2.090352
! Fit after  self-cal, rms=0.204496Jy  sigma=2.089433
! Inverting map and beam 
! Estimated beam: bmin=0.5834 mas, bmaj=1.1 mas, bpa=-2.964 degrees
! Estimated noise=0.797104 mJy/beam.
! Added new window around map position (0.5, 13).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101472 Jy
! Component: 100  -  total flux cleaned = 0.0153803 Jy
! Total flux subtracted in 100 components = 0.0153803 Jy
! Clean residual min=-0.007741 max=0.008414 Jy/beam
! Clean residual mean=0.000810 rms=0.002112 Jy/beam
! Combined flux in latest and established models = 3.73368 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 287 components and 3.73368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203798Jy  sigma=2.082170
! Fit after  self-cal, rms=0.203828Jy  sigma=2.081341
! Inverting map and beam 
! Estimated beam: bmin=0.5829 mas, bmaj=1.099 mas, bpa=-2.953 degrees
! Estimated noise=0.797508 mJy/beam.
! Added new window around map position (15.9, -10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00958332 Jy
! Component: 100  -  total flux cleaned = 0.014859 Jy
! Total flux subtracted in 100 components = 0.014859 Jy
! Clean residual min=-0.007628 max=0.008331 Jy/beam
! Clean residual mean=0.000772 rms=0.002047 Jy/beam
! Combined flux in latest and established models = 3.74854 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 298 components and 3.74854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203213Jy  sigma=2.075019
! Fit after  self-cal, rms=0.203218Jy  sigma=2.074286
! Inverting map and beam 
! Estimated beam: bmin=0.5826 mas, bmaj=1.099 mas, bpa=-2.944 degrees
! Estimated noise=0.797868 mJy/beam.
! Added new window around map position (17.6, -14.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00911267 Jy
! Component: 100  -  total flux cleaned = 0.0148371 Jy
! Total flux subtracted in 100 components = 0.0148371 Jy
! Clean residual min=-0.007449 max=0.007727 Jy/beam
! Clean residual mean=0.000725 rms=0.001996 Jy/beam
! Combined flux in latest and established models = 3.76338 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 306 components and 3.76338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202637Jy  sigma=2.068466
! Fit after  self-cal, rms=0.202640Jy  sigma=2.068041
! Inverting map and beam 
! Estimated beam: bmin=0.5822 mas, bmaj=1.099 mas, bpa=-2.936 degrees
! Estimated noise=0.798144 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00762155 Jy
! Component: 100  -  total flux cleaned = 0.0112448 Jy
! Total flux subtracted in 100 components = 0.0112448 Jy
! Clean residual min=-0.007304 max=0.007555 Jy/beam
! Clean residual mean=0.000699 rms=0.001950 Jy/beam
! Combined flux in latest and established models = 3.77462 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 314 components and 3.77462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202164Jy  sigma=2.063885
! Fit after  self-cal, rms=0.201396Jy  sigma=2.038132
! Inverting map 
! Added new window around map position (-10.1, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00727029 Jy
! Component: 100  -  total flux cleaned = 0.0109813 Jy
! Total flux subtracted in 100 components = 0.0109813 Jy
! Clean residual min=-0.007187 max=0.007170 Jy/beam
! Clean residual mean=0.000599 rms=0.001895 Jy/beam
! Combined flux in latest and established models = 3.7856 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 329 components and 3.7856 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200911Jy  sigma=2.033706
! Fit after  self-cal, rms=0.201282Jy  sigma=2.031365
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 1611+343_X
! Writing UV FITS file: 1611+343_X.uvf
! Writing 329 model components to file: 1611+343_X.mod
! wwins: Wrote 20 windows to 1611+343_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5822 x 1.099 at -2.936 degrees (North through East)
! Clean map  min=-0.011194  max=2.1133 Jy/beam
! Writing clean map to FITS file: 1611+343_X.fits
! Writing difmap environment to: 1611+343_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 1611+343_X]
device 1611+343_Xuv.ps/vps,1,2
! Attempting to open device: '1611+343_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 1611+343_Xim.ps/vps
! Attempting to open device: '1611+343_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.5822 mas, bmaj=1.099 mas, bpa=-2.936 degrees
! Estimated noise=0.798144 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5822 x 1.099 at -2.936 degrees (North through East)
! Clean map  min=-0.011194  max=2.1133 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.1]
quit
! Quitting program
! Log file 1611+343_X.log closed on Wed Aug 13 12:09:28 2008