! Started logfile: 0234+285_X.log on Fri Aug  8 15:03:02 2008
observe 0234+285_X.edt
! Reading UV FITS file: 0234+285_X.edt
! AN table 1: 22 integrations on 171 of 171 possible baselines.
! AN table 2: 140 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.167461 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0234+285
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1526 lines of history.
! 
! Reading 18556 visibilities.
![@gonzo7-0.1 0234+285_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 7.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 348 telescope corrections were flagged in sub-array 1.
!  A total of 2014 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 348 telescope corrections were flagged in sub-array 1.
!  A total of 2011 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 348 telescope corrections were flagged in sub-array 1.
!  A total of 2016 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 348 telescope corrections were flagged in sub-array 1.
!  A total of 2017 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.026398Jy  sigma=15.091904
! Fit after  self-cal, rms=1.025745Jy  sigma=15.093511
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5594 mas, bmaj=0.9033 mas, bpa=-0.7614 degrees
! Estimated noise=0.792306 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.4854 Jy
! Total flux subtracted in 50 components = 1.4854 Jy
! Clean residual min=-0.046479 max=0.414419 Jy/beam
! Clean residual mean=0.000017 rms=0.014692 Jy/beam
! Combined flux in latest and established models = 1.4854 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.4854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.601646Jy  sigma=8.368844
! Fit after  self-cal, rms=0.601648Jy  sigma=8.368846
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.348053 Jy
! Total flux subtracted in 50 components = 0.348053 Jy
! Clean residual min=-0.032187 max=0.130793 Jy/beam
! Clean residual mean=0.000011 rms=0.008012 Jy/beam
! Combined flux in latest and established models = 1.83346 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.83346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.390772Jy  sigma=4.921275
! Fit after  self-cal, rms=0.390757Jy  sigma=4.921233
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.1338 Jy
! Total flux subtracted in 50 components = 0.1338 Jy
! Clean residual min=-0.034756 max=0.058386 Jy/beam
! Clean residual mean=0.000011 rms=0.006741 Jy/beam
! Combined flux in latest and established models = 1.96726 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 4 model components to the UV plane model.
! The established model now contains 7 components and 1.96726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.349234Jy  sigma=4.336543
! Fit after  self-cal, rms=0.349161Jy  sigma=4.336322
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0616985 Jy
! Total flux subtracted in 50 components = 0.0616985 Jy
! Clean residual min=-0.036327 max=0.041067 Jy/beam
! Clean residual mean=0.000011 rms=0.006507 Jy/beam
! Combined flux in latest and established models = 2.02896 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 4 model components to the UV plane model.
! The established model now contains 8 components and 2.02896 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.339113Jy  sigma=4.263545
! Fit after  self-cal, rms=0.339065Jy  sigma=4.263415
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6846 mas, bmaj=1.132 mas, bpa=0.9579 degrees
! Estimated noise=0.498375 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.3, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0560723 Jy
! Component: 100  -  total flux cleaned = 0.0763881 Jy
! Total flux subtracted in 100 components = 0.0763881 Jy
! Clean residual min=-0.031643 max=0.038165 Jy/beam
! Clean residual mean=0.002089 rms=0.006617 Jy/beam
! Combined flux in latest and established models = 2.10534 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 31 components and 2.10534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.330648Jy  sigma=4.101452
! Fit after  self-cal, rms=0.329748Jy  sigma=4.083192
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.06     GC        1.01     HH        1.00*    
!   HN        1.00*    KK        0.77     KP        1.00     LA        1.03     
!   MA        1.00*    MK        0.97     NL        1.05     NY        1.07     
!   OV        0.98     PT        0.97     SC        1.00*    TS        0.92     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.07     FD        0.91     GC        0.72     HH        1.28     
!   HN        1.09     KK        1.00*    KP        1.11     LA        0.93     
!   MA        1.01     MK        1.07     NL        1.06     NY        0.91     
!   OV        1.03     PT        0.95     SC        1.22     TS        1.00*    
!   WF        0.91     WZ        1.02     GG        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     GC        0.98     HH        1.00*    
!   HN        1.00*    KK        0.83     KP        1.00     LA        1.04     
!   MA        1.00*    MK        0.97     NL        1.03     NY        1.09     
!   OV        0.98     PT        0.96     SC        1.00*    TS        0.92     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        1.00     GC        1.02     HH        1.24     
!   HN        0.94     KK        1.00*    KP        0.95     LA        0.93     
!   MA        1.03     MK        1.02     NL        0.92     NY        0.95     
!   OV        1.01     PT        1.17     SC        1.03     TS        1.00*    
!   WF        0.89     WZ        1.04     GG        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     GC        0.98     HH        1.00*    
!   HN        1.00*    KK        0.90     KP        1.00     LA        0.98     
!   MA        1.00*    MK        0.96     NL        1.05     NY        1.09     
!   OV        0.98     PT        0.92     SC        1.00*    TS        0.94     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.02     GC        0.96     HH        1.32     
!   HN        0.84     KK        1.00*    KP        0.89     LA        1.01     
!   MA        1.08     MK        1.02     NL        1.01     NY        0.93     
!   OV        0.96     PT        1.04     SC        0.95     TS        1.00*    
!   WF        0.79     WZ        1.02     GG        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     GC        0.97     HH        1.00*    
!   HN        1.00*    KK        0.85     KP        0.98     LA        1.01     
!   MA        1.00*    MK        0.98     NL        1.07     NY        1.05     
!   OV        0.97     PT        0.97     SC        1.00*    TS        0.94     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  A total of 9 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     FD        1.14     GC        0.67     HH        1.53     
!   HN        0.88     KK        1.00*    KP        0.90     LA        1.10     
!   MA        0.99     MK        1.09     NL        1.01     NY        0.95     
!   OV        1.06     PT        1.07     SC        0.97     TS        1.00*    
!   WF        0.90     WZ        1.05     GG        1.00*    
! 
! 
! Fit before self-cal, rms=0.329748Jy  sigma=4.083192
! Fit after  self-cal, rms=0.186787Jy  sigma=2.040040
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6918 mas, bmaj=1.139 mas, bpa=0.1694 degrees
! Estimated noise=0.494861 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 4.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404991 Jy
! Component: 100  -  total flux cleaned = 0.0640039 Jy
! Total flux subtracted in 100 components = 0.0640039 Jy
! Clean residual min=-0.017072 max=0.018600 Jy/beam
! Clean residual mean=0.000705 rms=0.003377 Jy/beam
! Combined flux in latest and established models = 2.16935 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 56 components and 2.16935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179148Jy  sigma=1.879818
! Fit after  self-cal, rms=0.178226Jy  sigma=1.858766
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184686 Jy
! Component: 100  -  total flux cleaned = 0.0298128 Jy
! Total flux subtracted in 100 components = 0.0298128 Jy
! Clean residual min=-0.015591 max=0.016704 Jy/beam
! Clean residual mean=0.000571 rms=0.003056 Jy/beam
! Combined flux in latest and established models = 2.19916 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 76 components and 2.19916 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175384Jy  sigma=1.803556
! Fit after  self-cal, rms=0.137115Jy  sigma=1.348051
! Inverting map and beam 
! Estimated beam: bmin=0.69 mas, bmaj=1.139 mas, bpa=-0.1241 degrees
! Estimated noise=0.496925 mJy/beam.
! Added new window around map position (-0.2, 7.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0180052 Jy
! Component: 100  -  total flux cleaned = 0.0313457 Jy
! Total flux subtracted in 100 components = 0.0313457 Jy
! Clean residual min=-0.006585 max=0.011259 Jy/beam
! Clean residual mean=0.000707 rms=0.001596 Jy/beam
! Combined flux in latest and established models = 2.23051 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 111 components and 2.23051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134513Jy  sigma=1.302164
! Fit after  self-cal, rms=0.133902Jy  sigma=1.284353
! Inverting map and beam 
! Estimated beam: bmin=0.6896 mas, bmaj=1.138 mas, bpa=-0.09117 degrees
! Estimated noise=0.497161 mJy/beam.
! Added new window around map position (-0.4, 0.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130163 Jy
! Component: 100  -  total flux cleaned = 0.0220069 Jy
! Total flux subtracted in 100 components = 0.0220069 Jy
! Clean residual min=-0.006129 max=0.009814 Jy/beam
! Clean residual mean=0.000613 rms=0.001407 Jy/beam
! Combined flux in latest and established models = 2.25251 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 43 model components to the UV plane model.
! The established model now contains 136 components and 2.25251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.132395Jy  sigma=1.259607
! Fit after  self-cal, rms=0.132118Jy  sigma=1.252034
! Inverting map and beam 
! Estimated beam: bmin=0.6893 mas, bmaj=1.138 mas, bpa=-0.06822 degrees
! Estimated noise=0.497427 mJy/beam.
! Added new window around map position (-1.6, 7.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118845 Jy
! Component: 100  -  total flux cleaned = 0.0191458 Jy
! Total flux subtracted in 100 components = 0.0191458 Jy
! Clean residual min=-0.005543 max=0.007115 Jy/beam
! Clean residual mean=0.000535 rms=0.001250 Jy/beam
! Combined flux in latest and established models = 2.27166 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 151 components and 2.27166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130830Jy  sigma=1.231449
! Fit after  self-cal, rms=0.130604Jy  sigma=1.226762
! Inverting map and beam 
! Estimated beam: bmin=0.689 mas, bmaj=1.137 mas, bpa=-0.05859 degrees
! Estimated noise=0.497706 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848531 Jy
! Component: 100  -  total flux cleaned = 0.0139834 Jy
! Total flux subtracted in 100 components = 0.0139834 Jy
! Clean residual min=-0.004764 max=0.006578 Jy/beam
! Clean residual mean=0.000490 rms=0.001149 Jy/beam
! Combined flux in latest and established models = 2.28564 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 170 components and 2.28564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129765Jy  sigma=1.214057
! Fit after  self-cal, rms=0.129621Jy  sigma=1.211501
! Inverting map and beam 
! Estimated beam: bmin=0.6888 mas, bmaj=1.136 mas, bpa=-0.05372 degrees
! Estimated noise=0.49798 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00708133 Jy
! Component: 100  -  total flux cleaned = 0.0113969 Jy
! Total flux subtracted in 100 components = 0.0113969 Jy
! Clean residual min=-0.004312 max=0.006182 Jy/beam
! Clean residual mean=0.000454 rms=0.001076 Jy/beam
! Combined flux in latest and established models = 2.29704 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 43 model components to the UV plane model.
! The established model now contains 183 components and 2.29704 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128948Jy  sigma=1.202027
! Fit after  self-cal, rms=0.128839Jy  sigma=1.200252
! Inverting map and beam 
! Estimated beam: bmin=0.6885 mas, bmaj=1.136 mas, bpa=-0.05797 degrees
! Estimated noise=0.498294 mJy/beam.
! Added new window around map position (1.9, 0.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00724295 Jy
! Component: 100  -  total flux cleaned = 0.010957 Jy
! Total flux subtracted in 100 components = 0.010957 Jy
! Clean residual min=-0.003997 max=0.005440 Jy/beam
! Clean residual mean=0.000417 rms=0.001016 Jy/beam
! Combined flux in latest and established models = 2.308 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 191 components and 2.308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128188Jy  sigma=1.192210
! Fit after  self-cal, rms=0.128098Jy  sigma=1.190765
! Inverting map and beam 
! Estimated beam: bmin=0.6883 mas, bmaj=1.135 mas, bpa=-0.06666 degrees
! Estimated noise=0.498634 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589505 Jy
! Component: 100  -  total flux cleaned = 0.00905479 Jy
! Total flux subtracted in 100 components = 0.00905479 Jy
! Clean residual min=-0.003627 max=0.005191 Jy/beam
! Clean residual mean=0.000385 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 2.31705 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 197 components and 2.31705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127582Jy  sigma=1.184471
! Fit after  self-cal, rms=0.127517Jy  sigma=1.183380
! Inverting map and beam 
! Estimated beam: bmin=0.6881 mas, bmaj=1.135 mas, bpa=-0.0776 degrees
! Estimated noise=0.498969 mJy/beam.
! Added new window around map position (-1.7, 2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00588295 Jy
! Component: 100  -  total flux cleaned = 0.00880478 Jy
! Total flux subtracted in 100 components = 0.00880478 Jy
! Clean residual min=-0.003346 max=0.004709 Jy/beam
! Clean residual mean=0.000355 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 2.32586 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 208 components and 2.32586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127073Jy  sigma=1.177531
! Fit after  self-cal, rms=0.126994Jy  sigma=1.176562
! Inverting map and beam 
! Estimated beam: bmin=0.6879 mas, bmaj=1.134 mas, bpa=-0.08857 degrees
! Estimated noise=0.49927 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00478122 Jy
! Component: 100  -  total flux cleaned = 0.00763715 Jy
! Total flux subtracted in 100 components = 0.00763715 Jy
! Clean residual min=-0.003092 max=0.004468 Jy/beam
! Clean residual mean=0.000331 rms=0.000886 Jy/beam
! Combined flux in latest and established models = 2.3335 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 211 components and 2.33349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126617Jy  sigma=1.172159
! Fit after  self-cal, rms=0.126569Jy  sigma=1.171320
! Inverting map and beam 
! Estimated beam: bmin=0.6877 mas, bmaj=1.134 mas, bpa=-0.101 degrees
! Estimated noise=0.499588 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00442309 Jy
! Component: 100  -  total flux cleaned = 0.00704851 Jy
! Total flux subtracted in 100 components = 0.00704851 Jy
! Clean residual min=-0.002878 max=0.004248 Jy/beam
! Clean residual mean=0.000310 rms=0.000855 Jy/beam
! Combined flux in latest and established models = 2.34054 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 219 components and 2.34054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126242Jy  sigma=1.167648
! Fit after  self-cal, rms=0.126204Jy  sigma=1.166901
! Inverting map and beam 
! Estimated beam: bmin=0.6875 mas, bmaj=1.133 mas, bpa=-0.1144 degrees
! Estimated noise=0.499907 mJy/beam.
! Added new window around map position (-3.1, 8.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00514083 Jy
! Component: 100  -  total flux cleaned = 0.00764004 Jy
! Total flux subtracted in 100 components = 0.00764004 Jy
! Clean residual min=-0.002723 max=0.003839 Jy/beam
! Clean residual mean=0.000284 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 2.34818 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 230 components and 2.34818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125897Jy  sigma=1.163508
! Fit after  self-cal, rms=0.125871Jy  sigma=1.162821
! Inverting map and beam 
! Estimated beam: bmin=0.6873 mas, bmaj=1.133 mas, bpa=-0.1286 degrees
! Estimated noise=0.500198 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00421673 Jy
! Component: 100  -  total flux cleaned = 0.00635361 Jy
! Total flux subtracted in 100 components = 0.00635361 Jy
! Clean residual min=-0.002621 max=0.003734 Jy/beam
! Clean residual mean=0.000264 rms=0.000794 Jy/beam
! Combined flux in latest and established models = 2.35454 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 236 components and 2.35454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125616Jy  sigma=1.160087
! Fit after  self-cal, rms=0.125247Jy  sigma=1.153140
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0234+285_X
! Writing UV FITS file: 0234+285_X.uvf
! Writing 236 model components to file: 0234+285_X.mod
! wwins: Wrote 10 windows to 0234+285_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6873 x 1.133 at -0.1286 degrees (North through East)
! Clean map  min=-0.0025233  max=1.9246 Jy/beam
! Writing clean map to FITS file: 0234+285_X.fits
! Writing difmap environment to: 0234+285_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0234+285_X]
device 0234+285_Xuv.ps/vps,1,2
! Attempting to open device: '0234+285_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0234+285_Xim.ps/vps
! Attempting to open device: '0234+285_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.6873 mas, bmaj=1.133 mas, bpa=-0.1286 degrees
! Estimated noise=0.500198 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6873 x 1.133 at -0.1286 degrees (North through East)
! Clean map  min=-0.0025233  max=1.9246 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo7-0.1]
quit
! Quitting program
! Log file 0234+285_X.log closed on Fri Aug  8 15:03:20 2008