! Started logfile: difmap.log_1 on Wed Aug 27 12:56:48 2008
osberve NGC1052_S.edt
! Syntax error in line:
! osberve NGC1052_S.edt
!       ^
! Unable to identify keyword "osberve"
! 
observe NGC1052_S.edt
! Reading UV FITS file: NGC1052_S.edt
! AN table 1: 16 integrations on 171 of 171 possible baselines.
! AN table 2: 28 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.028841 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: NGC1052
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1619 lines of history.
! 
! Reading 868 visibilities.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapsize 1024,0.4
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
mapcolor color
! Mapplot colormap: rainbow, contrast: 1 brightness: 0.5.
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.023 mas, bmaj=7.437 mas, bpa=4.88 degrees
! Estimated noise=2.35464 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.440983 Jy
! Component: 100  -  total flux cleaned = 0.573344 Jy
! Total flux subtracted in 100 components = 0.573344 Jy
! Clean residual min=-0.053847 max=0.101988 Jy/beam
! Clean residual mean=0.000167 rms=0.018430 Jy/beam
! Combined flux in latest and established models = 0.573344 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.573344 Jy
! 
! Correcting IF 1.
!  A total of 260 telescope corrections were flagged in sub-array 1.
!  A total of 532 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 260 telescope corrections were flagged in sub-array 1.
!  A total of 532 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 260 telescope corrections were flagged in sub-array 1.
!  A total of 532 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 260 telescope corrections were flagged in sub-array 1.
!  A total of 532 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=0.318117Jy  sigma=4.524270
! Fit after  self-cal, rms=0.312772Jy  sigma=4.438296
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.023 mas, bmaj=7.437 mas, bpa=4.88 degrees
! Estimated noise=2.35464 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.105592 Jy
! Component: 100  -  total flux cleaned = 0.146713 Jy
! Total flux subtracted in 100 components = 0.146713 Jy
! Clean residual min=-0.034419 max=0.101030 Jy/beam
! Clean residual mean=0.000118 rms=0.013495 Jy/beam
! Combined flux in latest and established models = 0.720057 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.720057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.246731Jy  sigma=3.578192
! Fit after  self-cal, rms=0.242340Jy  sigma=3.470371
mapp
! Inverting map 
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.0392264 Jy
! Component: 100  -  total flux cleaned = 0.048524 Jy
! Total flux subtracted in 100 components = 0.048524 Jy
! Clean residual min=-0.030708 max=0.079250 Jy/beam
! Clean residual mean=0.000103 rms=0.011984 Jy/beam
! Combined flux in latest and established models = 0.768581 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 29 components and 0.768581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222986Jy  sigma=3.226021
! Fit after  self-cal, rms=0.221532Jy  sigma=3.191301
mapp
! Inverting map 
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.0181911 Jy
! Component: 100  -  total flux cleaned = 0.0251688 Jy
! Total flux subtracted in 100 components = 0.0251688 Jy
! Clean residual min=-0.032163 max=0.070079 Jy/beam
! Clean residual mean=0.000095 rms=0.011452 Jy/beam
! Combined flux in latest and established models = 0.79375 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 0.79375 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.211854Jy  sigma=3.069699
! Fit after  self-cal, rms=0.211335Jy  sigma=3.055421
mapp
! Inverting map 
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.0998474 Jy
! Component: 100  -  total flux cleaned = 0.144692 Jy
! Total flux subtracted in 100 components = 0.144692 Jy
! Clean residual min=-0.020362 max=0.028929 Jy/beam
! Clean residual mean=0.000046 rms=0.006082 Jy/beam
! Combined flux in latest and established models = 0.938443 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 58 components and 0.938443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150834Jy  sigma=2.120892
! Fit after  self-cal, rms=0.149675Jy  sigma=2.100575
mapp
! Inverting map 
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327667 Jy
! Component: 100  -  total flux cleaned = 0.0569927 Jy
! Total flux subtracted in 100 components = 0.0569927 Jy
! Clean residual min=-0.019004 max=0.025160 Jy/beam
! Clean residual mean=0.000028 rms=0.004980 Jy/beam
! Combined flux in latest and established models = 0.995435 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 75 components and 0.995435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.134760Jy  sigma=1.868459
! Fit after  self-cal, rms=0.134715Jy  sigma=1.866268
mapp
! Inverting map 
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194949 Jy
! Component: 100  -  total flux cleaned = 0.034321 Jy
! Total flux subtracted in 100 components = 0.034321 Jy
! Clean residual min=-0.018899 max=0.024692 Jy/beam
! Clean residual mean=0.000016 rms=0.004593 Jy/beam
! Combined flux in latest and established models = 1.02976 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 1.02976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128565Jy  sigma=1.759377
! Fit after  self-cal, rms=0.128560Jy  sigma=1.758428
clean
! Inverting map 
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121438 Jy
! Component: 100  -  total flux cleaned = 0.0214301 Jy
! Total flux subtracted in 100 components = 0.0214301 Jy
! Clean residual min=-0.018722 max=0.024467 Jy/beam
! Clean residual mean=0.000009 rms=0.004438 Jy/beam
! Combined flux in latest and established models = 1.05119 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 86 components and 1.05119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125847Jy  sigma=1.705592
! Fit after  self-cal, rms=0.125847Jy  sigma=1.705081
mapp
! Inverting map 
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.00528679 Jy
! Component: 100  -  total flux cleaned = 0.00755666 Jy
! Total flux subtracted in 100 components = 0.00755666 Jy
! Clean residual min=-0.018272 max=0.023869 Jy/beam
! Clean residual mean=0.000007 rms=0.004321 Jy/beam
! Combined flux in latest and established models = 1.05874 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 1.05874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124897Jy  sigma=1.685218
! Fit after  self-cal, rms=0.124871Jy  sigma=1.684926
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.366 mas, bmaj=8.107 mas, bpa=4.19 degrees
! Estimated noise=2.01049 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.025884 Jy
! Component: 100  -  total flux cleaned = 0.0369577 Jy
! Total flux subtracted in 100 components = 0.0369577 Jy
! Clean residual min=-0.021080 max=0.026835 Jy/beam
! Clean residual mean=-0.000057 rms=0.006162 Jy/beam
! Combined flux in latest and established models = 1.0957 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 1.0957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122409Jy  sigma=1.631136
! Fit after  self-cal, rms=0.122471Jy  sigma=1.629887
gscale
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00322
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00*    GC        1.05     HH        1.00*    
!   HN        1.00*    KK        0.78     KP        1.04     LA        1.00     
!   MA        1.00*    MK        1.04     NL        1.00*    NY        1.00*    
!   OV        0.98     PT        0.96     SC        1.00*    TS        1.03     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    HH        0.00*    
!   HN        0.00*    KK        0.00*    KP        0.00*    LA        0.00*    
!   MA        0.00*    MK        0.00*    NL        0.00*    NY        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TS        0.00*    
!   WF        0.00*    WZ        0.00*    GG        0.00*    
! 
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.999182
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00*    GC        0.95     HH        1.00*    
!   HN        1.00*    KK        0.85     KP        0.95     LA        1.02     
!   MA        1.00*    MK        1.00     NL        1.00*    NY        1.00*    
!   OV        1.03     PT        1.02     SC        1.00*    TS        1.10     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    HH        0.00*    
!   HN        0.00*    KK        0.00*    KP        0.00*    LA        0.00*    
!   MA        0.00*    MK        0.00*    NL        0.00*    NY        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TS        0.00*    
!   WF        0.00*    WZ        0.00*    GG        0.00*    
! 
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00599
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00*    GC        0.93     HH        1.00*    
!   HN        1.00*    KK        0.83     KP        0.96     LA        1.03     
!   MA        1.00*    MK        1.00     NL        1.00*    NY        1.00*    
!   OV        1.05     PT        1.00     SC        1.00*    TS        1.05     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    HH        0.00*    
!   HN        0.00*    KK        0.00*    KP        0.00*    LA        0.00*    
!   MA        0.00*    MK        0.00*    NL        0.00*    NY        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TS        0.00*    
!   WF        0.00*    WZ        0.00*    GG        0.00*    
! 
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.990061
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.00*    GC        1.05     HH        1.00*    
!   HN        1.00*    KK        0.93     KP        0.95     LA        0.97     
!   MA        1.00*    MK        0.98     NL        1.00*    NY        1.00*    
!   OV        1.05     PT        1.01     SC        1.00*    TS        1.19     
!   WF        1.00*    WZ        1.00*    GG        1.00*    
! 
!  Amplitude normalization factor in sub-array 2: 1
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    GC        0.00*    HH        0.00*    
!   HN        0.00*    KK        0.00*    KP        0.00*    LA        0.00*    
!   MA        0.00*    MK        0.00*    NL        0.00*    NY        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    TS        0.00*    
!   WF        0.00*    WZ        0.00*    GG        0.00*    
! 
! 
! Fit before self-cal, rms=0.122471Jy  sigma=1.629887
! Fit after  self-cal, rms=0.113638Jy  sigma=1.402656
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.432 mas, bmaj=8.139 mas, bpa=4.306 degrees
! Estimated noise=2.01102 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.00885619 Jy
! Component: 100  -  total flux cleaned = 0.00945815 Jy
! Total flux subtracted in 100 components = 0.00945815 Jy
! Clean residual min=-0.015729 max=0.013541 Jy/beam
! Clean residual mean=-0.000000 rms=0.003681 Jy/beam
! Combined flux in latest and established models = 1.10516 Jy
selfcal true,false,128
! Performing amp+phase self-cal over 128 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 106 components and 1.10516 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00198
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.998518
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00183
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.996319
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.112595Jy  sigma=1.385384
! Fit after  self-cal, rms=0.112270Jy  sigma=1.378214
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.448 mas, bmaj=8.127 mas, bpa=4.338 degrees
! Estimated noise=2.01293 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.000981846 Jy
! Component: 100  -  total flux cleaned = 0.000986719 Jy
! Total flux subtracted in 100 components = 0.000986719 Jy
! Clean residual min=-0.015144 max=0.013682 Jy/beam
! Clean residual mean=-0.000001 rms=0.003558 Jy/beam
! Combined flux in latest and established models = 1.10615 Jy
selfcal true,false,64
! Performing amp+phase self-cal over 64 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 109 components and 1.10615 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00141
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.999153
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00101
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.997725
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.111934Jy  sigma=1.374307
! Fit after  self-cal, rms=0.111917Jy  sigma=1.372975
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.457 mas, bmaj=8.124 mas, bpa=4.35 degrees
! Estimated noise=2.0129 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128895 Jy
! Component: 100  -  total flux cleaned = -0.00128939 Jy
! Total flux subtracted in 100 components = -0.00128939 Jy
! Clean residual min=-0.014994 max=0.013687 Jy/beam
! Clean residual mean=-0.000004 rms=0.003512 Jy/beam
! Combined flux in latest and established models = 1.10486 Jy
selfcal true,false,32
! Performing amp+phase self-cal over 32 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 116 components and 1.10486 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00118
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.999925
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.0005
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.998379
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.111685Jy  sigma=1.371561
! Fit after  self-cal, rms=0.111692Jy  sigma=1.370791
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.462 mas, bmaj=8.123 mas, bpa=4.355 degrees
! Estimated noise=2.01223 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = -0.00184466 Jy
! Component: 100  -  total flux cleaned = -0.00198807 Jy
! Total flux subtracted in 100 components = -0.00198806 Jy
! Clean residual min=-0.014933 max=0.013598 Jy/beam
! Clean residual mean=-0.000007 rms=0.003482 Jy/beam
! Combined flux in latest and established models = 1.10287 Jy
selfcal true,false,16
! Performing amp+phase self-cal over 16 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 120 components and 1.10287 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00097
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00025
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00022
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.998886
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.111498Jy  sigma=1.370365
! Fit after  self-cal, rms=0.111495Jy  sigma=1.369735
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.467 mas, bmaj=8.123 mas, bpa=4.358 degrees
! Estimated noise=2.0113 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = -0.00207104 Jy
! Component: 100  -  total flux cleaned = -0.00220044 Jy
! Total flux subtracted in 100 components = -0.00220044 Jy
! Clean residual min=-0.014905 max=0.013485 Jy/beam
! Clean residual mean=-0.000010 rms=0.003462 Jy/beam
! Combined flux in latest and established models = 1.10067 Jy
selfcal true,false,8
! Performing amp+phase self-cal over 8 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 122 components and 1.10067 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00088
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00046
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00013
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.999336
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.111322Jy  sigma=1.369730
! Fit after  self-cal, rms=0.111308Jy  sigma=1.369165
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.471 mas, bmaj=8.124 mas, bpa=4.357 degrees
! Estimated noise=2.00987 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = -0.00208325 Jy
! Component: 100  -  total flux cleaned = -0.00208649 Jy
! Total flux subtracted in 100 components = -0.00208649 Jy
! Clean residual min=-0.014903 max=0.013389 Jy/beam
! Clean residual mean=-0.000014 rms=0.003445 Jy/beam
! Combined flux in latest and established models = 1.09858 Jy
selfcal true,false,4
! Performing amp+phase self-cal over 4 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 124 components and 1.09858 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 1.00081
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00057
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 1.00005
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 0.999598
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.111154Jy  sigma=1.369413
! Fit after  self-cal, rms=0.111138Jy  sigma=1.368883
clean
! Inverting map and beam 
! Estimated beam: bmin=2.474 mas, bmaj=8.125 mas, bpa=4.354 degrees
! Estimated noise=2.00825 mJy/beam.
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = -0.00213496 Jy
! Component: 100  -  total flux cleaned = -0.00224499 Jy
! Total flux subtracted in 100 components = -0.00224499 Jy
! Clean residual min=-0.014903 max=0.013288 Jy/beam
! Clean residual mean=-0.000016 rms=0.003431 Jy/beam
! Combined flux in latest and established models = 1.09634 Jy
selfcal true,false,2
! Performing amp+phase self-cal over 2 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 124 components and 1.09634 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.993757
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 0.998637
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.997243
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.00274
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.110997Jy  sigma=1.369301
! Fit after  self-cal, rms=0.112382Jy  sigma=1.362749
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.518 mas, bmaj=8.113 mas, bpa=4.527 degrees
! Estimated noise=2.03018 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
clean
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.00953791 Jy
! Component: 100  -  total flux cleaned = 0.00891637 Jy
! Total flux subtracted in 100 components = 0.00891637 Jy
! Clean residual min=-0.011897 max=0.011661 Jy/beam
! Clean residual mean=-0.000014 rms=0.002976 Jy/beam
! Combined flux in latest and established models = 1.10525 Jy
selfcal true,false,1
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 131 components and 1.10525 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.992688
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.01022
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.998468
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.00862
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.110732Jy  sigma=1.342013
! Fit after  self-cal, rms=0.110179Jy  sigma=1.309997
radp
! Using default options string "m1"
! Move the cursor into the plot window and press 'H' for help
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.499 mas, bmaj=8.105 mas, bpa=4.512 degrees
! Estimated noise=2.02453 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
do i=1,3
  clean
  selfcal true,false,1
  end do
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.00885607 Jy
! Component: 100  -  total flux cleaned = 0.01085 Jy
! Total flux subtracted in 100 components = 0.01085 Jy
! Clean residual min=-0.010541 max=0.011153 Jy/beam
! Clean residual mean=-0.000065 rms=0.002708 Jy/beam
! Combined flux in latest and established models = 1.1161 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 138 components and 1.1161 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.992811
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00774
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.99633
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.00672
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.109613Jy  sigma=1.306960
! Fit after  self-cal, rms=0.108801Jy  sigma=1.285545
! Inverting map and beam 
! Estimated beam: bmin=2.484 mas, bmaj=8.097 mas, bpa=4.472 degrees
! Estimated noise=2.00843 mJy/beam.
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 0.00414033 Jy
! Component: 100  -  total flux cleaned = 0.00447627 Jy
! Total flux subtracted in 100 components = 0.00447627 Jy
! Clean residual min=-0.009982 max=0.010632 Jy/beam
! Clean residual mean=-0.000070 rms=0.002577 Jy/beam
! Combined flux in latest and established models = 1.12058 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 143 components and 1.12058 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.993974
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00433
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.996445
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.00469
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.108414Jy  sigma=1.286064
! Fit after  self-cal, rms=0.107967Jy  sigma=1.274192
! Inverting map and beam 
! Estimated beam: bmin=2.472 mas, bmaj=8.092 mas, bpa=4.439 degrees
! Estimated noise=1.99263 mJy/beam.
! clean: niter=100  gain=0.05  cutoff=0
! Component: 050  -  total flux cleaned = 7.14719e-05 Jy
! Component: 100  -  total flux cleaned = 0.000550179 Jy
! Total flux subtracted in 100 components = 0.000550179 Jy
! Clean residual min=-0.009609 max=0.010110 Jy/beam
! Clean residual mean=-0.000069 rms=0.002513 Jy/beam
! Combined flux in latest and established models = 1.12113 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 149 components and 1.12113 Jy
! 
! Correcting IF 1.
!  Amplitude normalization factor in sub-array 1: 0.995246
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 2.
!  Amplitude normalization factor in sub-array 1: 1.00204
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 3.
!  Amplitude normalization factor in sub-array 1: 0.9972
!  Amplitude normalization factor in sub-array 2: 1
! 
! Correcting IF 4.
!  Amplitude normalization factor in sub-array 1: 1.0035
!  Amplitude normalization factor in sub-array 2: 1
! 
! Fit before self-cal, rms=0.107625Jy  sigma=1.274927
! Fit after  self-cal, rms=0.107481Jy  sigma=1.269638
mapp
! Inverting map and beam 
! Estimated beam: bmin=2.464 mas, bmaj=8.088 mas, bpa=4.421 degrees
! Estimated noise=1.97986 mJy/beam.
! 
! Move the cursor into the plot window and press 'H' for help
save NGC1052_S
! Writing UV FITS file: NGC1052_S.uvf
! Writing 149 model components to file: NGC1052_S.mod
! wwins: Wrote 6 windows to NGC1052_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.464 x 8.088 at 4.421 degrees (North through East)
! Clean map  min=-0.008976  max=0.47203 Jy/beam
! Writing clean map to FITS file: NGC1052_S.fits
! Writing difmap environment to: NGC1052_S.par
exit
! Exiting program
! Log file difmap.log_1 closed on Wed Aug 27 13:05:56 2008