! Started logfile: 0859+470_S.log on Wed Aug 20 14:19:26 2008
observe 0859+470_S.edt
! Reading UV FITS file: 0859+470_S.edt
! AN table 1: 239 integrations on 171 of 171 possible baselines.
! Apparent sampling: 0.113582 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0859+470
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1615 lines of history.
! 
! Reading 18568 visibilities.
![@gonzo7-0.4 0859+470_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 7.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3395 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 3287 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 3317 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 3300 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.696889Jy  sigma=9.486689
! Fit after  self-cal, rms=0.694686Jy  sigma=9.496369
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.898 mas, bmaj=2.799 mas, bpa=7.724 degrees
! Estimated noise=0.884004 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.26143 Jy
! Total flux subtracted in 50 components = 0.26143 Jy
! Clean residual min=-0.022650 max=0.092444 Jy/beam
! Clean residual mean=0.000126 rms=0.006614 Jy/beam
! Combined flux in latest and established models = 0.26143 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.26143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.271890Jy  sigma=3.508416
! Fit after  self-cal, rms=0.271705Jy  sigma=3.504454
! Inverting map 
! Added new window around map position (0.4, 3.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.101916 Jy
! Total flux subtracted in 50 components = 0.101916 Jy
! Clean residual min=-0.016187 max=0.050040 Jy/beam
! Clean residual mean=0.000099 rms=0.005058 Jy/beam
! Combined flux in latest and established models = 0.363346 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 15 components and 0.363346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.233095Jy  sigma=2.846048
! Fit after  self-cal, rms=0.231874Jy  sigma=2.822040
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0663147 Jy
! Total flux subtracted in 50 components = 0.0663147 Jy
! Clean residual min=-0.014281 max=0.035893 Jy/beam
! Clean residual mean=0.000081 rms=0.004163 Jy/beam
! Combined flux in latest and established models = 0.42966 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 30 components and 0.42966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212157Jy  sigma=2.468663
! Fit after  self-cal, rms=0.211551Jy  sigma=2.455685
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0485549 Jy
! Total flux subtracted in 50 components = 0.0485549 Jy
! Clean residual min=-0.012770 max=0.027541 Jy/beam
! Clean residual mean=0.000068 rms=0.003600 Jy/beam
! Combined flux in latest and established models = 0.478215 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 39 components and 0.478215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199785Jy  sigma=2.231750
! Fit after  self-cal, rms=0.199520Jy  sigma=2.226991
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0374604 Jy
! Total flux subtracted in 50 components = 0.0374604 Jy
! Clean residual min=-0.011603 max=0.021856 Jy/beam
! Clean residual mean=0.000059 rms=0.003233 Jy/beam
! Combined flux in latest and established models = 0.515676 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 51 components and 0.515676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.191939Jy  sigma=2.078542
! Fit after  self-cal, rms=0.191837Jy  sigma=2.076571
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0300424 Jy
! Total flux subtracted in 50 components = 0.0300424 Jy
! Clean residual min=-0.010701 max=0.018582 Jy/beam
! Clean residual mean=0.000051 rms=0.002982 Jy/beam
! Combined flux in latest and established models = 0.545718 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 63 components and 0.545718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.186692Jy  sigma=1.973990
! Fit after  self-cal, rms=0.186661Jy  sigma=1.973000
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.18 mas, bmaj=3.27 mas, bpa=10.46 degrees
! Estimated noise=0.507616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0437528 Jy
! Component: 100  -  total flux cleaned = 0.0749225 Jy
! Total flux subtracted in 100 components = 0.0749225 Jy
! Clean residual min=-0.009484 max=0.021578 Jy/beam
! Clean residual mean=0.000746 rms=0.003507 Jy/beam
! Combined flux in latest and established models = 0.620641 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 41 model components to the UV plane model.
! The established model now contains 88 components and 0.620641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177737Jy  sigma=1.781721
! Fit after  self-cal, rms=0.177673Jy  sigma=1.778426
! Inverting map 
! Added new window around map position (-2.4, 4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254085 Jy
! Component: 100  -  total flux cleaned = 0.044632 Jy
! Total flux subtracted in 100 components = 0.044632 Jy
! Clean residual min=-0.008950 max=0.015542 Jy/beam
! Clean residual mean=0.000595 rms=0.003080 Jy/beam
! Combined flux in latest and established models = 0.665273 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 119 components and 0.665273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174207Jy  sigma=1.708113
! Fit after  self-cal, rms=0.174204Jy  sigma=1.705538
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 102 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     GC        0.99     HH        1.00*    
!   HN        0.87     KK        0.72     KP        0.86     LA        0.95     
!   MA        1.19     MK        0.90     NL        0.95     NY        1.08     
!   OV        1.06     PT        0.97     SC        0.90     TS        0.94     
!   WF        1.00     WZ        0.97     GG        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.95     GC        1.03     HH        1.00*    
!   HN        0.91     KK        0.67     KP        0.93     LA        1.01     
!   MA        1.17     MK        0.91     NL        1.08     NY        0.95     
!   OV        0.99     PT        0.82     SC        0.98     TS        1.00     
!   WF        0.99     WZ        1.06     GG        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 27 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     GC        0.96     HH        1.00*    
!   HN        1.17     KK        0.67     KP        1.07     LA        0.83     
!   MA        1.09     MK        0.91     NL        1.00     NY        1.01     
!   OV        1.08     PT        0.88     SC        1.19     TS        0.95     
!   WF        1.01     WZ        1.11     GG        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.84     GC        1.03     HH        1.00*    
!   HN        1.09     KK        0.69     KP        1.06     LA        0.74     
!   MA        0.98     MK        0.87     NL        0.99     NY        1.05     
!   OV        0.97     PT        0.89     SC        1.09     TS        0.95     
!   WF        0.98     WZ        1.08     GG        1.00*    
! 
! 
! Fit before self-cal, rms=0.174204Jy  sigma=1.705538
! Fit after  self-cal, rms=0.166230Jy  sigma=1.453948
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.195 mas, bmaj=3.273 mas, bpa=12.38 degrees
! Estimated noise=0.486457 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.2, 55.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114422 Jy
! Component: 100  -  total flux cleaned = 0.0173514 Jy
! Total flux subtracted in 100 components = 0.0173514 Jy
! Clean residual min=-0.005210 max=0.008318 Jy/beam
! Clean residual mean=0.000573 rms=0.001542 Jy/beam
! Combined flux in latest and established models = 0.682624 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 149 components and 0.682624 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165299Jy  sigma=1.437977
! Fit after  self-cal, rms=0.165309Jy  sigma=1.436715
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.4, 18.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00741417 Jy
! Component: 100  -  total flux cleaned = 0.012702 Jy
! Total flux subtracted in 100 components = 0.012702 Jy
! Clean residual min=-0.005548 max=0.007517 Jy/beam
! Clean residual mean=0.000536 rms=0.001470 Jy/beam
! Combined flux in latest and established models = 0.695326 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 163 components and 0.695326 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.164749Jy  sigma=1.426885
! Fit after  self-cal, rms=0.194412Jy  sigma=1.310158
! Inverting map and beam 
! Estimated beam: bmin=2.196 mas, bmaj=3.266 mas, bpa=12.08 degrees
! Estimated noise=0.486685 mJy/beam.
! Added new window around map position (4.4, 53.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00716454 Jy
! Component: 100  -  total flux cleaned = 0.0112192 Jy
! Total flux subtracted in 100 components = 0.0112192 Jy
! Clean residual min=-0.003333 max=0.005923 Jy/beam
! Clean residual mean=0.000390 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 0.706546 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 192 components and 0.706546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.194116Jy  sigma=1.302282
! Fit after  self-cal, rms=0.195595Jy  sigma=1.298068
! Inverting map and beam 
! Estimated beam: bmin=2.197 mas, bmaj=3.264 mas, bpa=12.08 degrees
! Estimated noise=0.485035 mJy/beam.
! Added new window around map position (-6.4, 44).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0046892 Jy
! Component: 100  -  total flux cleaned = 0.00860806 Jy
! Total flux subtracted in 100 components = 0.00860806 Jy
! Clean residual min=-0.003025 max=0.005348 Jy/beam
! Clean residual mean=0.000365 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.715154 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 43 model components to the UV plane model.
! The established model now contains 220 components and 0.715154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195331Jy  sigma=1.293203
! Fit after  self-cal, rms=0.197198Jy  sigma=1.292308
! Inverting map and beam 
! Estimated beam: bmin=2.198 mas, bmaj=3.263 mas, bpa=12.09 degrees
! Estimated noise=0.483697 mJy/beam.
! Added new window around map position (1.2, 43.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0041371 Jy
! Component: 100  -  total flux cleaned = 0.00750175 Jy
! Total flux subtracted in 100 components = 0.00750175 Jy
! Clean residual min=-0.002815 max=0.004884 Jy/beam
! Clean residual mean=0.000339 rms=0.000925 Jy/beam
! Combined flux in latest and established models = 0.722655 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 240 components and 0.722656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196948Jy  sigma=1.288352
! Fit after  self-cal, rms=0.198272Jy  sigma=1.288093
! Inverting map and beam 
! Estimated beam: bmin=2.199 mas, bmaj=3.262 mas, bpa=12.07 degrees
! Estimated noise=0.482394 mJy/beam.
! Added new window around map position (9.6, 58.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00451613 Jy
! Component: 100  -  total flux cleaned = 0.00771444 Jy
! Total flux subtracted in 100 components = 0.00771444 Jy
! Clean residual min=-0.002818 max=0.004653 Jy/beam
! Clean residual mean=0.000316 rms=0.000869 Jy/beam
! Combined flux in latest and established models = 0.73037 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 257 components and 0.73037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198058Jy  sigma=1.284532
! Fit after  self-cal, rms=0.199495Jy  sigma=1.284200
! Inverting map and beam 
! Estimated beam: bmin=2.199 mas, bmaj=3.26 mas, bpa=12.09 degrees
! Estimated noise=0.481291 mJy/beam.
! Added new window around map position (-5.6, 23.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00409779 Jy
! Component: 100  -  total flux cleaned = 0.00748774 Jy
! Total flux subtracted in 100 components = 0.00748774 Jy
! Clean residual min=-0.002775 max=0.004245 Jy/beam
! Clean residual mean=0.000284 rms=0.000815 Jy/beam
! Combined flux in latest and established models = 0.737858 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 279 components and 0.737858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199320Jy  sigma=1.280869
! Fit after  self-cal, rms=0.201243Jy  sigma=1.280704
! Inverting map and beam 
! Estimated beam: bmin=2.199 mas, bmaj=3.26 mas, bpa=12.08 degrees
! Estimated noise=0.4804 mJy/beam.
! Added new window around map position (-10, -4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284099 Jy
! Component: 100  -  total flux cleaned = 0.00572974 Jy
! Total flux subtracted in 100 components = 0.00572974 Jy
! Clean residual min=-0.002679 max=0.003936 Jy/beam
! Clean residual mean=0.000271 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.743587 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 287 components and 0.743587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201100Jy  sigma=1.278104
! Fit after  self-cal, rms=0.203208Jy  sigma=1.277909
! Inverting map and beam 
! Estimated beam: bmin=2.199 mas, bmaj=3.258 mas, bpa=12.12 degrees
! Estimated noise=0.479365 mJy/beam.
! Added new window around map position (18, 18.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251214 Jy
! Component: 100  -  total flux cleaned = 0.00517202 Jy
! Total flux subtracted in 100 components = 0.00517202 Jy
! Clean residual min=-0.002619 max=0.003226 Jy/beam
! Clean residual mean=0.000248 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 0.748759 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 296 components and 0.748759 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203087Jy  sigma=1.275720
! Fit after  self-cal, rms=0.205360Jy  sigma=1.275515
! Inverting map and beam 
! Estimated beam: bmin=2.2 mas, bmaj=3.258 mas, bpa=12.15 degrees
! Estimated noise=0.47844 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015092 Jy
! Component: 100  -  total flux cleaned = 0.0040074 Jy
! Total flux subtracted in 100 components = 0.0040074 Jy
! Clean residual min=-0.002567 max=0.003121 Jy/beam
! Clean residual mean=0.000238 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.752767 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 308 components and 0.752767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.205266Jy  sigma=1.274154
! Fit after  self-cal, rms=0.205060Jy  sigma=1.271002
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0859+470_S
! Writing UV FITS file: 0859+470_S.uvf
! Writing 308 model components to file: 0859+470_S.mod
! wwins: Wrote 12 windows to 0859+470_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.2 x 3.258 at 12.15 degrees (North through East)
! Clean map  min=-0.0024291  max=0.33413 Jy/beam
! Writing clean map to FITS file: 0859+470_S.fits
! Writing difmap environment to: 0859+470_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0859+470_S]
device 0859+470_Suv.ps/vps,1,2
! Attempting to open device: '0859+470_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0859+470_Sim.ps/vps
! Attempting to open device: '0859+470_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.2 mas, bmaj=3.258 mas, bpa=12.15 degrees
! Estimated noise=0.47844 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.2 x 3.258 at 12.15 degrees (North through East)
! Clean map  min=-0.0024291  max=0.33413 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo7-0.4]
quit
! Quitting program
! Log file 0859+470_S.log closed on Wed Aug 20 14:19:47 2008