! Started logfile: 0528+134_S.log on Thu Aug 28 13:47:03 2008 observe 0528+134_S.edt2 ! Reading UV FITS file: 0528+134_S.edt2 ! AN table 1: 61 integrations on 171 of 171 possible baselines. ! AN table 2: 5 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.190324 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0528+134 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1615 lines of history. ! ! Reading 8592 visibilities. ![@gonzo5-0.4 0528+134_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 903 telescope corrections were flagged in sub-array 1. ! A total of 95 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 903 telescope corrections were flagged in sub-array 1. ! A total of 95 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 903 telescope corrections were flagged in sub-array 1. ! A total of 95 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 903 telescope corrections were flagged in sub-array 1. ! A total of 95 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.509791Jy sigma=7.643277 ! Fit after self-cal, rms=0.508548Jy sigma=7.641937 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=5.498 mas, bpa=15.71 degrees ! Estimated noise=1.27227 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.09112 Jy ! Total flux subtracted in 50 components = 1.09112 Jy ! Clean residual min=-0.053699 max=0.305296 Jy/beam ! Clean residual mean=0.000370 rms=0.019769 Jy/beam ! Combined flux in latest and established models = 1.09112 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 1.09112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434410Jy sigma=6.553413 ! Fit after self-cal, rms=0.434397Jy sigma=6.553276 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.290725 Jy ! Total flux subtracted in 50 components = 0.290725 Jy ! Clean residual min=-0.032660 max=0.120821 Jy/beam ! Clean residual mean=0.000205 rms=0.010113 Jy/beam ! Combined flux in latest and established models = 1.38184 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 1.38184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238533Jy sigma=3.567156 ! Fit after self-cal, rms=0.238144Jy sigma=3.562696 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.1321 Jy ! Total flux subtracted in 50 components = 0.1321 Jy ! Clean residual min=-0.023108 max=0.063963 Jy/beam ! Clean residual mean=0.000129 rms=0.006622 Jy/beam ! Combined flux in latest and established models = 1.51394 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 1.51394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170927Jy sigma=2.449867 ! Fit after self-cal, rms=0.170509Jy sigma=2.445040 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0768401 Jy ! Total flux subtracted in 50 components = 0.0768401 Jy ! Clean residual min=-0.017699 max=0.039685 Jy/beam ! Clean residual mean=0.000084 rms=0.004924 Jy/beam ! Combined flux in latest and established models = 1.59078 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 25 components and 1.59078 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140888Jy sigma=1.902439 ! Fit after self-cal, rms=0.140625Jy sigma=1.898611 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0486994 Jy ! Total flux subtracted in 50 components = 0.0486994 Jy ! Clean residual min=-0.016217 max=0.035943 Jy/beam ! Clean residual mean=0.000054 rms=0.004053 Jy/beam ! Combined flux in latest and established models = 1.63948 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 1.63948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126517Jy sigma=1.621037 ! Fit after self-cal, rms=0.126344Jy sigma=1.618067 ! Inverting map ! Added new window around map position (4.4, 4.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380283 Jy ! Total flux subtracted in 50 components = 0.0380283 Jy ! Clean residual min=-0.014804 max=0.026567 Jy/beam ! Clean residual mean=0.000029 rms=0.003456 Jy/beam ! Combined flux in latest and established models = 1.67751 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 1.67751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116873Jy sigma=1.448560 ! Fit after self-cal, rms=0.116687Jy sigma=1.442478 ! Inverting map ! Added new window around map position (-4.4, -3.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0286582 Jy ! Total flux subtracted in 50 components = 0.0286582 Jy ! Clean residual min=-0.012871 max=0.016801 Jy/beam ! Clean residual mean=0.000010 rms=0.003061 Jy/beam ! Combined flux in latest and established models = 1.70617 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 1.70617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111320Jy sigma=1.341836 ! Fit after self-cal, rms=0.111336Jy sigma=1.340125 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210615 Jy ! Total flux subtracted in 50 components = 0.0210615 Jy ! Clean residual min=-0.012261 max=0.015043 Jy/beam ! Clean residual mean=-0.000003 rms=0.002832 Jy/beam ! Combined flux in latest and established models = 1.72723 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 1.72723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108455Jy sigma=1.282758 ! Fit after self-cal, rms=0.108491Jy sigma=1.281863 ! Inverting map ! Added new window around map position (11.2, 8.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011431 Jy ! Total flux subtracted in 50 components = 0.011431 Jy ! Clean residual min=-0.011508 max=0.012985 Jy/beam ! Clean residual mean=-0.000012 rms=0.002664 Jy/beam ! Combined flux in latest and established models = 1.73866 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 1.73866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106692Jy sigma=1.251779 ! Fit after self-cal, rms=0.106718Jy sigma=1.250760 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.461 mas, bmaj=6.038 mas, bpa=18.6 degrees ! Estimated noise=0.96215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149893 Jy ! Component: 100 - total flux cleaned = 0.0218713 Jy ! Total flux subtracted in 100 components = 0.0218713 Jy ! Clean residual min=-0.008220 max=0.009091 Jy/beam ! Clean residual mean=-0.000089 rms=0.002031 Jy/beam ! Combined flux in latest and established models = 1.76053 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 1.76053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104655Jy sigma=1.212569 ! Fit after self-cal, rms=0.104734Jy sigma=1.211526 ! Inverting map ! Added new window around map position (5.6, 11.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00482522 Jy ! Component: 100 - total flux cleaned = 0.00612614 Jy ! Total flux subtracted in 100 components = 0.00612614 Jy ! Clean residual min=-0.007882 max=0.007201 Jy/beam ! Clean residual mean=-0.000112 rms=0.001905 Jy/beam ! Combined flux in latest and established models = 1.76666 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 1.76666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103531Jy sigma=1.193624 ! Fit after self-cal, rms=0.103571Jy sigma=1.192886 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 GC 1.03 HH 1.00* ! HN 1.00 KK 1.05 KP 0.99 LA 0.98 ! MA 1.00* MK 1.00* NL 0.99 NY 1.00* ! OV 1.00 PT 0.99 SC 1.00 TS 1.00* ! WF 0.99 WZ 1.00* GG 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MK 0.00* NL 0.00* NY 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* GG 0.00* ! ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 GC 1.03 HH 1.00* ! HN 0.98 KK 1.01 KP 1.00 LA 1.00 ! MA 1.00* MK 1.00* NL 0.99 NY 1.00* ! OV 1.01 PT 1.01 SC 1.01 TS 1.00* ! WF 1.03 WZ 1.00* GG 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MK 0.00* NL 0.00* NY 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* GG 0.00* ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 GC 1.01 HH 1.00* ! HN 0.99 KK 0.95 KP 0.99 LA 0.99 ! MA 1.00* MK 1.00* NL 0.99 NY 1.00* ! OV 1.01 PT 1.00 SC 1.01 TS 1.00* ! WF 1.02 WZ 1.00* GG 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MK 0.00* NL 0.00* NY 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* GG 0.00* ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 GC 1.01 HH 1.00* ! HN 0.99 KK 1.09 KP 1.00 LA 1.00 ! MA 1.00* MK 1.00* NL 0.99 NY 1.00* ! OV 1.01 PT 1.00 SC 1.00 TS 1.00* ! WF 1.07 WZ 1.00* GG 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MK 0.00* NL 0.00* NY 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* GG 0.00* ! ! ! Fit before self-cal, rms=0.103571Jy sigma=1.192886 ! Fit after self-cal, rms=0.100760Jy sigma=1.118814 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.499 mas, bmaj=6.079 mas, bpa=18.35 degrees ! Estimated noise=0.974349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188814 Jy ! Component: 100 - total flux cleaned = -0.00211648 Jy ! Total flux subtracted in 100 components = -0.00211648 Jy ! Clean residual min=-0.005752 max=0.006094 Jy/beam ! Clean residual mean=-0.000007 rms=0.001437 Jy/beam ! Combined flux in latest and established models = 1.76454 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 1.76454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100259Jy sigma=1.112117 ! Fit after self-cal, rms=0.100288Jy sigma=1.111808 ! Inverting map ! Added new window around map position (26, 6.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393931 Jy ! Component: 100 - total flux cleaned = 0.00394775 Jy ! Total flux subtracted in 100 components = 0.00394775 Jy ! Clean residual min=-0.005408 max=0.005134 Jy/beam ! Clean residual mean=-0.000023 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 1.76849 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 93 components and 1.76849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099905Jy sigma=1.106607 ! Fit after self-cal, rms=0.099911Jy sigma=1.106312 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000504854 Jy ! Component: 100 - total flux cleaned = 0.000506691 Jy ! Total flux subtracted in 100 components = 0.000506691 Jy ! Clean residual min=-0.005141 max=0.005076 Jy/beam ! Clean residual mean=-0.000025 rms=0.001369 Jy/beam ! Combined flux in latest and established models = 1.769 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 96 components and 1.769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099701Jy sigma=1.103057 ! Fit after self-cal, rms=0.095869Jy sigma=0.985188 ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=6.086 mas, bpa=18.36 degrees ! Estimated noise=0.974698 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000818503 Jy ! Component: 100 - total flux cleaned = -0.001735 Jy ! Total flux subtracted in 100 components = -0.001735 Jy ! Clean residual min=-0.004809 max=0.004004 Jy/beam ! Clean residual mean=-0.000025 rms=0.001066 Jy/beam ! Combined flux in latest and established models = 1.76726 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 113 components and 1.76726 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095633Jy sigma=0.982828 ! Fit after self-cal, rms=0.095623Jy sigma=0.982614 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0528+134_S ! Writing UV FITS file: 0528+134_S.uvf ! Writing 113 model components to file: 0528+134_S.mod ! wwins: Wrote 6 windows to 0528+134_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.501 x 6.086 at 18.36 degrees (North through East) ! Clean map min=-0.0076582 max=1.4343 Jy/beam ! Writing clean map to FITS file: 0528+134_S.fits ! Writing difmap environment to: 0528+134_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0528+134_S] device 0528+134_Suv.ps/vps,1,2 ! Attempting to open device: '0528+134_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0528+134_Sim.ps/vps ! Attempting to open device: '0528+134_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=3.501 mas, bmaj=6.086 mas, bpa=18.36 degrees ! Estimated noise=0.974698 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.501 x 6.086 at 18.36 degrees (North through East) ! Clean map min=-0.0076582 max=1.4343 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file 0528+134_S.log closed on Thu Aug 28 13:47:13 2008