! Started logfile: 0234+285_S.log on Mon Aug 18 14:28:26 2008 observe 0234+285_S.edt ! Reading UV FITS file: 0234+285_S.edt ! AN table 1: 22 integrations on 171 of 171 possible baselines. ! AN table 2: 140 integrations on 171 of 171 possible baselines. ! Apparent sampling: 0.167461 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0234+285 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1615 lines of history. ! ! Reading 18556 visibilities. ![@gonzo6-0.4 0234+285_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 348 telescope corrections were flagged in sub-array 1. ! A total of 2006 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 348 telescope corrections were flagged in sub-array 1. ! A total of 2003 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 348 telescope corrections were flagged in sub-array 1. ! A total of 2000 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 348 telescope corrections were flagged in sub-array 1. ! A total of 1997 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.508595Jy sigma=7.090502 ! Fit after self-cal, rms=0.501794Jy sigma=6.917954 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.183 mas, bmaj=3.33 mas, bpa=-4.327 degrees ! Estimated noise=0.756752 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.543951 Jy ! Total flux subtracted in 50 components = 0.543951 Jy ! Clean residual min=-0.034307 max=0.206810 Jy/beam ! Clean residual mean=0.000221 rms=0.011050 Jy/beam ! Combined flux in latest and established models = 0.543951 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.543951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.478582Jy sigma=8.375420 ! Fit after self-cal, rms=0.477071Jy sigma=8.369597 ! Inverting map ! Added new window around map position (-0.8, 4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.218371 Jy ! Total flux subtracted in 50 components = 0.218371 Jy ! Clean residual min=-0.026705 max=0.105991 Jy/beam ! Clean residual mean=0.000147 rms=0.007964 Jy/beam ! Combined flux in latest and established models = 0.762323 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 20 components and 0.762323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369760Jy sigma=6.114893 ! Fit after self-cal, rms=0.364538Jy sigma=6.063238 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.137144 Jy ! Total flux subtracted in 50 components = 0.137144 Jy ! Clean residual min=-0.021888 max=0.074581 Jy/beam ! Clean residual mean=0.000103 rms=0.006272 Jy/beam ! Combined flux in latest and established models = 0.899466 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 42 components and 0.899466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309399Jy sigma=4.827376 ! Fit after self-cal, rms=0.307156Jy sigma=4.803661 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0989639 Jy ! Total flux subtracted in 50 components = 0.0989639 Jy ! Clean residual min=-0.018980 max=0.055462 Jy/beam ! Clean residual mean=0.000071 rms=0.005218 Jy/beam ! Combined flux in latest and established models = 0.99843 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 56 components and 0.99843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273113Jy sigma=4.018108 ! Fit after self-cal, rms=0.271723Jy sigma=3.999791 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0743584 Jy ! Total flux subtracted in 50 components = 0.0743584 Jy ! Clean residual min=-0.016779 max=0.043708 Jy/beam ! Clean residual mean=0.000048 rms=0.004509 Jy/beam ! Combined flux in latest and established models = 1.07279 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 1.07279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.250013Jy sigma=3.480524 ! Fit after self-cal, rms=0.249247Jy sigma=3.468178 ! Inverting map ! Added new window around map position (-1.2, 7.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576391 Jy ! Total flux subtracted in 50 components = 0.0576391 Jy ! Clean residual min=-0.015404 max=0.032535 Jy/beam ! Clean residual mean=0.000030 rms=0.004028 Jy/beam ! Combined flux in latest and established models = 1.13043 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 75 components and 1.13043 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235056Jy sigma=3.126819 ! Fit after self-cal, rms=0.234545Jy sigma=3.116632 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447134 Jy ! Total flux subtracted in 50 components = 0.0447134 Jy ! Clean residual min=-0.014392 max=0.025226 Jy/beam ! Clean residual mean=0.000016 rms=0.003705 Jy/beam ! Combined flux in latest and established models = 1.17514 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 1.17514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225316Jy sigma=2.894114 ! Fit after self-cal, rms=0.225058Jy sigma=2.887219 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348601 Jy ! Total flux subtracted in 50 components = 0.0348601 Jy ! Clean residual min=-0.015114 max=0.019608 Jy/beam ! Clean residual mean=0.000005 rms=0.003495 Jy/beam ! Combined flux in latest and established models = 1.21 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 87 components and 1.21 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.219085Jy sigma=2.745572 ! Fit after self-cal, rms=0.218980Jy sigma=2.741073 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0273278 Jy ! Total flux subtracted in 50 components = 0.0273278 Jy ! Clean residual min=-0.015791 max=0.015497 Jy/beam ! Clean residual mean=-0.000003 rms=0.003358 Jy/beam ! Combined flux in latest and established models = 1.23733 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 92 components and 1.23733 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215116Jy sigma=2.652478 ! Fit after self-cal, rms=0.215098Jy sigma=2.649196 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.68 mas, bmaj=4.101 mas, bpa=-3.075 degrees ! Estimated noise=0.457114 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0334131 Jy ! Component: 100 - total flux cleaned = 0.0540179 Jy ! Total flux subtracted in 100 components = 0.0540179 Jy ! Clean residual min=-0.010989 max=0.019018 Jy/beam ! Clean residual mean=0.000002 rms=0.003176 Jy/beam ! Combined flux in latest and established models = 1.29135 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 114 components and 1.29135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210070Jy sigma=2.538070 ! Fit after self-cal, rms=0.209937Jy sigma=2.529745 ! Inverting map ! Added new window around map position (1.2, 14). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203856 Jy ! Component: 100 - total flux cleaned = 0.0339858 Jy ! Total flux subtracted in 100 components = 0.0339858 Jy ! Clean residual min=-0.010964 max=0.011485 Jy/beam ! Clean residual mean=-0.000205 rms=0.002887 Jy/beam ! Combined flux in latest and established models = 1.32533 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 131 components and 1.32533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207605Jy sigma=2.488833 ! Fit after self-cal, rms=0.207608Jy sigma=2.483309 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.10 GC 1.04 HH 1.00* ! HN 1.00* KK 0.91 KP 1.03 LA 0.96 ! MA 1.00* MK 1.08 NL 1.09 NY 1.05 ! OV 0.95 PT 1.04 SC 1.00* TS 0.89 ! WF 1.00* WZ 1.00* GG 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 1.10 GC 0.88 HH 1.11 ! HN 0.92 KK 1.00* KP 0.89 LA 1.07 ! MA 1.65 MK 0.88 NL 0.93 NY 1.12 ! OV 1.02 PT 1.05 SC 0.89 TS 1.00* ! WF 1.02 WZ 1.09 GG 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 GC 1.03 HH 1.00* ! HN 1.00* KK 0.91 KP 1.05 LA 1.02 ! MA 1.00* MK 1.01 NL 1.06 NY 1.13 ! OV 1.02 PT 1.03 SC 1.00* TS 0.93 ! WF 1.00* WZ 1.00* GG 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.92 FD 1.02 GC 0.90 HH 1.12 ! HN 0.98 KK 1.00* KP 1.02 LA 1.08 ! MA 1.61 MK 0.92 NL 1.07 NY 1.12 ! OV 0.96 PT 0.90 SC 1.03 TS 1.00* ! WF 0.97 WZ 1.01 GG 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.01 GC 1.01 HH 1.00* ! HN 1.00* KK 0.89 KP 1.00 LA 1.05 ! MA 1.00* MK 1.00 NL 1.09 NY 1.03 ! OV 1.05 PT 1.02 SC 1.00* TS 0.91 ! WF 1.00* WZ 1.00* GG 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 GC 0.64 HH 1.00 ! HN 1.19 KK 1.00* KP 1.07 LA 0.90 ! MA 1.58 MK 0.91 NL 0.96 NY 1.09 ! OV 1.04 PT 0.93 SC 1.08 TS 1.00* ! WF 1.04 WZ 0.98 GG 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 GC 1.03 HH 1.00* ! HN 1.00* KK 0.96 KP 1.03 LA 1.03 ! MA 1.00* MK 1.02 NL 1.03 NY 1.09 ! OV 1.04 PT 1.04 SC 1.00* TS 0.89 ! WF 1.00* WZ 1.00* GG 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.89 GC 0.70 HH 1.04 ! HN 1.15 KK 1.00* KP 1.08 LA 0.78 ! MA 1.23 MK 0.86 NL 0.99 NY 1.09 ! OV 0.96 PT 0.97 SC 1.09 TS 1.00* ! WF 1.06 WZ 1.01 GG 1.00* ! ! ! Fit before self-cal, rms=0.207608Jy sigma=2.483309 ! Fit after self-cal, rms=0.167967Jy sigma=1.701181 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.729 mas, bmaj=4.124 mas, bpa=-3.608 degrees ! Estimated noise=0.45251 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 10.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00490507 Jy ! Component: 100 - total flux cleaned = 0.00690822 Jy ! Total flux subtracted in 100 components = 0.00690822 Jy ! Clean residual min=-0.006285 max=0.006434 Jy/beam ! Clean residual mean=0.000266 rms=0.001480 Jy/beam ! Combined flux in latest and established models = 1.33224 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 152 components and 1.33224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167021Jy sigma=1.686943 ! Fit after self-cal, rms=0.167134Jy sigma=1.683631 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 22). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360413 Jy ! Component: 100 - total flux cleaned = 0.00646699 Jy ! Total flux subtracted in 100 components = 0.00646699 Jy ! Clean residual min=-0.005932 max=0.006187 Jy/beam ! Clean residual mean=0.000228 rms=0.001412 Jy/beam ! Combined flux in latest and established models = 1.33871 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 162 components and 1.33871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166620Jy sigma=1.676695 ! Fit after self-cal, rms=0.198834Jy sigma=1.516739 ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=4.143 mas, bpa=-3.149 degrees ! Estimated noise=0.452025 mJy/beam. ! Added new window around map position (-2.8, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174168 Jy ! Component: 100 - total flux cleaned = 0.00340601 Jy ! Total flux subtracted in 100 components = 0.00340601 Jy ! Clean residual min=-0.003514 max=0.004570 Jy/beam ! Clean residual mean=0.000350 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 1.34211 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 171 components and 1.34211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.198346Jy sigma=1.511550 ! Fit after self-cal, rms=0.201275Jy sigma=1.499425 ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=4.143 mas, bpa=-3.1 degrees ! Estimated noise=0.451042 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000910233 Jy ! Component: 100 - total flux cleaned = 0.00231891 Jy ! Total flux subtracted in 100 components = 0.00231891 Jy ! Clean residual min=-0.003039 max=0.004442 Jy/beam ! Clean residual mean=0.000315 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 1.34443 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 178 components and 1.34443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200907Jy sigma=1.496661 ! Fit after self-cal, rms=0.200628Jy sigma=1.490909 ! Inverting map ! Added new window around map position (2, 5.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180979 Jy ! Component: 100 - total flux cleaned = 0.00301327 Jy ! Total flux subtracted in 100 components = 0.00301327 Jy ! Clean residual min=-0.002789 max=0.003543 Jy/beam ! Clean residual mean=0.000298 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 1.34745 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 188 components and 1.34745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200363Jy sigma=1.488782 ! Fit after self-cal, rms=0.200455Jy sigma=1.488862 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0234+285_S ! Writing UV FITS file: 0234+285_S.uvf ! Writing 188 model components to file: 0234+285_S.mod ! wwins: Wrote 8 windows to 0234+285_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.723 x 4.143 at -3.1 degrees (North through East) ! Clean map min=-0.0026946 max=0.68409 Jy/beam ! Writing clean map to FITS file: 0234+285_S.fits ! Writing difmap environment to: 0234+285_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0234+285_S] device 0234+285_Suv.ps/vps,1,2 ! Attempting to open device: '0234+285_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0234+285_Sim.ps/vps ! Attempting to open device: '0234+285_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.723 mas, bmaj=4.143 mas, bpa=-3.1 degrees ! Estimated noise=0.451042 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.723 x 4.143 at -3.1 degrees (North through East) ! Clean map min=-0.0026946 max=0.68409 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.4] quit ! Quitting program ! Log file 0234+285_S.log closed on Mon Aug 18 14:28:42 2008