! Started logfile: J0241-0815_X_2000_05_22_pus_uvs.log on Mon Nov 12 17:19:38 2007 obs J0241-0815_X_2000_05_22_pus_uva.fits ! Reading UV FITS file: J0241-0815_X_2000_05_22_pus_uva.fits ! AN table 1: 19 integrations on 190 of 190 possible baselines. ! AN table 2: 58 integrations on 190 of 190 possible baselines. ! AN table 3: 197 integrations on 190 of 190 possible baselines. ! AN table 4: 38 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.121592 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0241-0815 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1884 lines of history. ! ! Reading 28832 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0241-0815_X_2000_05_22_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 380 telescope corrections were flagged in sub-array 1. ! A total of 796 telescope corrections were flagged in sub-array 2. ! A total of 2617 telescope corrections were flagged in sub-array 3. ! A total of 517 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 380 telescope corrections were flagged in sub-array 1. ! A total of 796 telescope corrections were flagged in sub-array 2. ! A total of 2617 telescope corrections were flagged in sub-array 3. ! A total of 517 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 380 telescope corrections were flagged in sub-array 1. ! A total of 796 telescope corrections were flagged in sub-array 2. ! A total of 2617 telescope corrections were flagged in sub-array 3. ! A total of 517 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 380 telescope corrections were flagged in sub-array 1. ! A total of 796 telescope corrections were flagged in sub-array 2. ! A total of 2629 telescope corrections were flagged in sub-array 3. ! A total of 517 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.933795Jy sigma=0.008298 ! Fit after self-cal, rms=0.832599Jy sigma=0.007248 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.6137 mas, bmaj=1.791 mas, bpa=-1.667 degrees ! Estimated noise=836.616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152704 Jy ! Component: 100 - total flux cleaned = 0.221552 Jy ! Total flux subtracted in 100 components = 0.221552 Jy ! Clean residual min=-0.025957 max=0.081425 Jy/beam ! Clean residual mean=0.001222 rms=0.009606 Jy/beam ! Combined flux in latest and established models = 0.221552 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.221552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325729Jy sigma=0.003274 ! Fit after self-cal, rms=0.325417Jy sigma=0.003269 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (-3.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.077815 Jy ! Component: 100 - total flux cleaned = 0.125765 Jy ! Total flux subtracted in 100 components = 0.125765 Jy ! Clean residual min=-0.023101 max=0.066058 Jy/beam ! Clean residual mean=0.001062 rms=0.008279 Jy/beam ! Combined flux in latest and established models = 0.347318 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.347318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294272Jy sigma=0.002883 ! Fit after self-cal, rms=0.289990Jy sigma=0.002815 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0601324 Jy ! Component: 100 - total flux cleaned = 0.0983892 Jy ! Total flux subtracted in 100 components = 0.0983892 Jy ! Clean residual min=-0.023783 max=0.053328 Jy/beam ! Clean residual mean=0.000927 rms=0.007406 Jy/beam ! Combined flux in latest and established models = 0.445707 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 61 components and 0.445707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268003Jy sigma=0.002528 ! Fit after self-cal, rms=0.266000Jy sigma=0.002503 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545586 Jy ! Component: 100 - total flux cleaned = 0.0898528 Jy ! Total flux subtracted in 100 components = 0.0898528 Jy ! Clean residual min=-0.020044 max=0.039857 Jy/beam ! Clean residual mean=0.000822 rms=0.006492 Jy/beam ! Combined flux in latest and established models = 0.53556 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.53556 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.247113Jy sigma=0.002260 ! Fit after self-cal, rms=0.245337Jy sigma=0.002247 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (-1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0398823 Jy ! Component: 100 - total flux cleaned = 0.0682575 Jy ! Total flux subtracted in 100 components = 0.0682575 Jy ! Clean residual min=-0.018903 max=0.036028 Jy/beam ! Clean residual mean=0.000749 rms=0.005939 Jy/beam ! Combined flux in latest and established models = 0.603817 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 90 components and 0.603817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233515Jy sigma=0.002092 ! Fit after self-cal, rms=0.233071Jy sigma=0.002088 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (-6.6, -2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337487 Jy ! Component: 100 - total flux cleaned = 0.0558341 Jy ! Total flux subtracted in 100 components = 0.0558341 Jy ! Clean residual min=-0.017623 max=0.036805 Jy/beam ! Clean residual mean=0.000669 rms=0.005561 Jy/beam ! Combined flux in latest and established models = 0.659651 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 102 components and 0.659651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224726Jy sigma=0.001982 ! Fit after self-cal, rms=0.224239Jy sigma=0.001977 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (-9.6, -3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0359869 Jy ! Component: 100 - total flux cleaned = 0.0580688 Jy ! Total flux subtracted in 100 components = 0.0580688 Jy ! Clean residual min=-0.017476 max=0.033824 Jy/beam ! Clean residual mean=0.000574 rms=0.005023 Jy/beam ! Combined flux in latest and established models = 0.71772 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.71772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214550Jy sigma=0.001854 ! Fit after self-cal, rms=0.213931Jy sigma=0.001847 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (2.2, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332055 Jy ! Component: 100 - total flux cleaned = 0.0536173 Jy ! Total flux subtracted in 100 components = 0.0536173 Jy ! Clean residual min=-0.016546 max=0.020813 Jy/beam ! Clean residual mean=0.000498 rms=0.004512 Jy/beam ! Combined flux in latest and established models = 0.771337 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 137 components and 0.771337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205158Jy sigma=0.001732 ! Fit after self-cal, rms=0.204720Jy sigma=0.001729 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.8667 mas, bmaj=1.963 mas, bpa=1.231 degrees ! Estimated noise=477.389 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0479173 Jy ! Component: 100 - total flux cleaned = 0.085756 Jy ! Component: 150 - total flux cleaned = 0.117456 Jy ! Component: 200 - total flux cleaned = 0.144362 Jy ! Total flux subtracted in 200 components = 0.144362 Jy ! Clean residual min=-0.020729 max=0.025984 Jy/beam ! Clean residual mean=0.000711 rms=0.006193 Jy/beam ! Combined flux in latest and established models = 0.9157 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 168 components and 0.9157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189505Jy sigma=0.001511 ! Fit after self-cal, rms=0.188801Jy sigma=0.001505 ! Inverting map ! Your choice of large map pixels excluded 0.4% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* LA 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 GC 1.01 GG 1.00* ! HH 1.00* HN 1.00* KK 1.03 KP 1.08 ! MA 1.00* MC 1.00* MK 1.07 NL 1.19 ! NY 1.00* OV 1.05 PT 0.93 SC 1.00* ! TS 1.30 WF 1.00* WZ 1.00* LA 0.98 ! ! A total of 141 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.81 FD 0.92 GC 1.56 GG 1.00* ! HH 1.00* HN 1.18 KK 0.92 KP 1.06 ! MA 1.00* MC 1.00* MK 0.94 NL 1.15 ! NY 1.00* OV 0.91 PT 0.99 SC 1.14 ! TS 1.00* WF 1.03 WZ 1.00* LA 0.82 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 0.83 GC 1.00* GG 1.00* ! HH 1.00* HN 1.35 KK 1.00* KP 0.95 ! MA 1.00* MC 1.00* MK 1.00* NL 1.18 ! NY 1.00* OV 0.85 PT 0.93 SC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* LA 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* LA 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.89 FD 1.01 GC 1.03 GG 1.00* ! HH 1.00* HN 1.00* KK 1.03 KP 1.04 ! MA 1.00* MC 1.00* MK 1.08 NL 1.22 ! NY 1.00* OV 1.11 PT 0.89 SC 1.00* ! TS 1.11 WF 1.00* WZ 1.00* LA 0.94 ! ! A total of 141 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.81 FD 0.97 GC 1.56 GG 1.00* ! HH 1.00* HN 1.13 KK 0.88 KP 1.05 ! MA 1.00* MC 1.00* MK 0.94 NL 1.16 ! NY 1.00* OV 0.94 PT 0.95 SC 1.13 ! TS 1.00* WF 1.04 WZ 1.00* LA 0.79 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 0.85 GC 1.00* GG 1.00* ! HH 1.00* HN 1.18 KK 1.00* KP 0.91 ! MA 1.00* MC 1.00* MK 1.00* NL 1.22 ! NY 1.00* OV 0.91 PT 0.91 SC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* LA 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* LA 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.02 GC 1.05 GG 1.00* ! HH 1.00* HN 1.00* KK 0.99 KP 1.09 ! MA 1.00* MC 1.00* MK 1.03 NL 1.16 ! NY 1.00* OV 1.09 PT 0.92 SC 1.00* ! TS 1.47 WF 1.00* WZ 1.00* LA 0.97 ! ! A total of 141 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.83 FD 0.95 GC 1.54 GG 1.00* ! HH 1.00* HN 1.14 KK 0.92 KP 1.11 ! MA 1.00* MC 1.00* MK 0.94 NL 1.13 ! NY 1.00* OV 0.93 PT 0.98 SC 1.06 ! TS 1.00* WF 0.99 WZ 1.00* LA 0.83 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 0.83 GC 1.00* GG 1.00* ! HH 1.00* HN 1.19 KK 1.00* KP 0.96 ! MA 1.00* MC 1.00* MK 1.00* NL 1.14 ! NY 1.00* OV 0.88 PT 0.95 SC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* LA 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* GG 0.00* ! HH 0.00* HN 0.00* KK 0.00* KP 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* OV 0.00* PT 0.00* SC 0.00* ! TS 0.00* WF 0.00* WZ 0.00* LA 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.00 GC 1.00 GG 1.00* ! HH 1.00* HN 1.00* KK 1.04 KP 1.08 ! MA 1.00* MC 1.00* MK 1.11 NL 1.17 ! NY 1.00* OV 1.12 PT 0.92 SC 1.00* ! TS 1.41 WF 1.00* WZ 1.00* LA 0.95 ! ! A total of 141 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.82 FD 0.95 GC 1.46 GG 1.00* ! HH 1.00* HN 1.17 KK 0.97 KP 1.08 ! MA 1.00* MC 1.00* MK 0.97 NL 1.14 ! NY 1.00* OV 0.92 PT 1.01 SC 1.08 ! TS 1.00* WF 0.98 WZ 1.00* LA 0.80 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.14 FD 0.84 GC 1.00* GG 1.00* ! HH 1.00* HN 1.25 KK 1.00* KP 0.96 ! MA 1.00* MC 1.00* MK 1.00* NL 1.18 ! NY 1.00* OV 0.88 PT 0.93 SC 1.00* ! TS 1.00* WF 1.00* WZ 1.00* LA 1.00* ! ! ! Fit before self-cal, rms=0.188801Jy sigma=0.001505 ! Fit after self-cal, rms=0.210515Jy sigma=0.001349 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.9018 mas, bmaj=2.053 mas, bpa=0.09642 degrees ! Estimated noise=482.784 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.4, -4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549734 Jy ! Component: 100 - total flux cleaned = 0.0141096 Jy ! Component: 150 - total flux cleaned = 0.0213248 Jy ! Component: 200 - total flux cleaned = 0.0279755 Jy ! Total flux subtracted in 200 components = 0.0279755 Jy ! Clean residual min=-0.009868 max=0.012287 Jy/beam ! Clean residual mean=0.000454 rms=0.002572 Jy/beam ! Combined flux in latest and established models = 0.943675 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 188 components and 0.943675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207744Jy sigma=0.001312 ! Fit after self-cal, rms=0.208220Jy sigma=0.001307 ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208220Jy sigma=0.001307 ! Fit after self-cal, rms=0.239324Jy sigma=0.001286 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.9033 mas, bmaj=2.073 mas, bpa=0.4619 degrees ! Estimated noise=480.909 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267341 Jy ! Component: 100 - total flux cleaned = 0.00646821 Jy ! Component: 150 - total flux cleaned = 0.00891536 Jy ! Component: 200 - total flux cleaned = 0.0108504 Jy ! Total flux subtracted in 200 components = 0.0108504 Jy ! Clean residual min=-0.008100 max=0.010607 Jy/beam ! Clean residual mean=0.000436 rms=0.002100 Jy/beam ! Combined flux in latest and established models = 0.954526 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 197 components and 0.954526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238348Jy sigma=0.001275 ! Fit after self-cal, rms=0.238649Jy sigma=0.001274 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00967135 Jy ! Component: 100 - total flux cleaned = 0.0145553 Jy ! Component: 150 - total flux cleaned = 0.0176873 Jy ! Component: 200 - total flux cleaned = 0.0200459 Jy ! Total flux subtracted in 200 components = 0.0200459 Jy ! Clean residual min=-0.007599 max=0.008479 Jy/beam ! Clean residual mean=0.000348 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.974572 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 213 components and 0.974572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237926Jy sigma=0.001264 ! Fit after self-cal, rms=0.237866Jy sigma=0.001263 ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (-17, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00725319 Jy ! Component: 100 - total flux cleaned = 0.0103008 Jy ! Component: 150 - total flux cleaned = 0.0122442 Jy ! Component: 200 - total flux cleaned = 0.0140308 Jy ! Total flux subtracted in 200 components = 0.0140308 Jy ! Clean residual min=-0.007578 max=0.006199 Jy/beam ! Clean residual mean=0.000312 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.988602 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 227 components and 0.988603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237417Jy sigma=0.001257 ! Fit after self-cal, rms=0.237376Jy sigma=0.001257 ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237376Jy sigma=0.001257 ! Fit after self-cal, rms=0.262319Jy sigma=0.001250 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.9092 mas, bmaj=2.072 mas, bpa=1.026 degrees ! Estimated noise=477.575 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00433517 Jy ! Component: 100 - total flux cleaned = 0.00801233 Jy ! Component: 150 - total flux cleaned = 0.0112362 Jy ! Component: 200 - total flux cleaned = 0.0138436 Jy ! Total flux subtracted in 200 components = 0.0138436 Jy ! Clean residual min=-0.005909 max=0.006298 Jy/beam ! Clean residual mean=0.000280 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 1.00245 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 247 components and 1.00245 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262011Jy sigma=0.001246 ! Fit after self-cal, rms=0.262053Jy sigma=0.001245 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (8.8, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062029 Jy ! Component: 100 - total flux cleaned = 0.00950272 Jy ! Component: 150 - total flux cleaned = 0.0117089 Jy ! Component: 200 - total flux cleaned = 0.0137525 Jy ! Total flux subtracted in 200 components = 0.0137525 Jy ! Clean residual min=-0.006045 max=0.005200 Jy/beam ! Clean residual mean=0.000232 rms=0.001265 Jy/beam ! Combined flux in latest and established models = 1.0162 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 268 components and 1.0162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261783Jy sigma=0.001242 ! Fit after self-cal, rms=0.261798Jy sigma=0.001242 ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261798Jy sigma=0.001242 ! Fit after self-cal, rms=0.263934Jy sigma=0.001240 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=2.256 mas, bmaj=3.835 mas, bpa=10.81 degrees ! Estimated noise=530.774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00675434 Jy ! Component: 100 - total flux cleaned = 0.0117795 Jy ! Component: 150 - total flux cleaned = 0.0159141 Jy ! Component: 200 - total flux cleaned = 0.0190247 Jy ! Total flux subtracted in 200 components = 0.0190247 Jy ! Clean residual min=-0.004961 max=0.005048 Jy/beam ! Clean residual mean=0.000445 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 1.03522 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 305 components and 1.03522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263811Jy sigma=0.001237 ! Fit after self-cal, rms=0.263830Jy sigma=0.001237 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00337927 Jy ! Component: 100 - total flux cleaned = 0.00464651 Jy ! Component: 150 - total flux cleaned = 0.00599038 Jy ! Component: 200 - total flux cleaned = 0.00720647 Jy ! Total flux subtracted in 200 components = 0.00720647 Jy ! Clean residual min=-0.004897 max=0.005119 Jy/beam ! Clean residual mean=0.000399 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 1.04243 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 317 components and 1.04243 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263794Jy sigma=0.001236 ! Fit after self-cal, rms=0.263804Jy sigma=0.001236 ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.9107 mas, bmaj=2.074 mas, bpa=1.067 degrees ! Estimated noise=475.816 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9107 x 2.074 at 1.067 degrees (North through East) ! Clean map min=-0.0050768 max=0.20176 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.6399 mas, bmaj=1.855 mas, bpa=-2.63 degrees ! Estimated noise=888.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170046 Jy ! Component: 100 - total flux cleaned = 0.275482 Jy ! Component: 150 - total flux cleaned = 0.35518 Jy ! Component: 200 - total flux cleaned = 0.419599 Jy ! Total flux subtracted in 200 components = 0.419599 Jy ! Clean residual min=-0.021055 max=0.039200 Jy/beam ! Clean residual mean=0.000966 rms=0.006929 Jy/beam ! Combined flux in latest and established models = 0.4196 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.4196 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.9107 mas, bmaj=2.074 mas, bpa=1.067 degrees ! Estimated noise=475.816 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0980443 Jy ! Component: 100 - total flux cleaned = 0.172397 Jy ! Component: 150 - total flux cleaned = 0.232665 Jy ! Component: 200 - total flux cleaned = 0.282184 Jy ! Total flux subtracted in 200 components = 0.282184 Jy ! Clean residual min=-0.020578 max=0.033152 Jy/beam ! Clean residual mean=0.001425 rms=0.007751 Jy/beam ! Combined flux in latest and established models = 0.701784 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 86 components and 0.701784 Jy ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Added new window around map position (-2.6, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418049 Jy ! Component: 100 - total flux cleaned = 0.0762643 Jy ! Component: 150 - total flux cleaned = 0.10508 Jy ! Component: 200 - total flux cleaned = 0.12941 Jy ! Total flux subtracted in 200 components = 0.12941 Jy ! Clean residual min=-0.013510 max=0.017628 Jy/beam ! Clean residual mean=0.000952 rms=0.004313 Jy/beam ! Combined flux in latest and established models = 0.831193 Jy ! Adding 60 model components to the UV plane model. ! The established model now contains 128 components and 0.831194 Jy ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=2.256 mas, bmaj=3.835 mas, bpa=10.81 degrees ! Estimated noise=530.774 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366302 Jy ! Component: 100 - total flux cleaned = 0.0639524 Jy ! Component: 150 - total flux cleaned = 0.0853844 Jy ! Component: 200 - total flux cleaned = 0.102848 Jy ! Total flux subtracted in 200 components = 0.102848 Jy ! Clean residual min=-0.010352 max=0.011511 Jy/beam ! Clean residual mean=0.001182 rms=0.003831 Jy/beam ! Combined flux in latest and established models = 0.934042 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146142 Jy ! Component: 100 - total flux cleaned = 0.0269665 Jy ! Component: 150 - total flux cleaned = 0.0374987 Jy ! Component: 200 - total flux cleaned = 0.0465379 Jy ! Total flux subtracted in 200 components = 0.0465379 Jy ! Clean residual min=-0.006260 max=0.006618 Jy/beam ! Clean residual mean=0.000839 rms=0.002371 Jy/beam ! Combined flux in latest and established models = 0.980579 Jy ! Adding 132 model components to the UV plane model. ! The established model now contains 233 components and 0.980579 Jy ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! Estimated beam: bmin=0.9107 mas, bmaj=2.074 mas, bpa=1.067 degrees ! Estimated noise=475.816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00752803 Jy ! Component: 100 - total flux cleaned = 0.0136172 Jy ! Component: 150 - total flux cleaned = 0.0189735 Jy ! Component: 200 - total flux cleaned = 0.0232185 Jy ! Total flux subtracted in 200 components = 0.0232185 Jy ! Clean residual min=-0.004909 max=0.005838 Jy/beam ! Clean residual mean=0.000328 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 1.0038 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 265 components and 1.0038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263879Jy sigma=0.001239 ! Fit after self-cal, rms=0.263756Jy sigma=0.001236 wmodel J0241-0815_X_2000_05_22_pus_map.mod ! Writing 265 model components to file: J0241-0815_X_2000_05_22_pus_map.mod wobs J0241-0815_X_2000_05_22_pus_uvs.fits ! Writing UV FITS file: J0241-0815_X_2000_05_22_pus_uvs.fits wwins J0241-0815_X_2000_05_22_pus_map.win ! wwins: Wrote 12 windows to J0241-0815_X_2000_05_22_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126068 Jy ! Component: 100 - total flux cleaned = 0.00208128 Jy ! Component: 150 - total flux cleaned = 0.00269385 Jy ! Component: 200 - total flux cleaned = 0.00356238 Jy ! Component: 250 - total flux cleaned = 0.00432554 Jy ! Component: 300 - total flux cleaned = 0.00533229 Jy ! Component: 350 - total flux cleaned = 0.00624262 Jy ! Component: 400 - total flux cleaned = 0.00712597 Jy ! Component: 450 - total flux cleaned = 0.00798755 Jy ! Component: 500 - total flux cleaned = 0.00876993 Jy ! Component: 550 - total flux cleaned = 0.0094784 Jy ! Component: 600 - total flux cleaned = 0.0103461 Jy ! Component: 650 - total flux cleaned = 0.0110832 Jy ! Component: 700 - total flux cleaned = 0.0118631 Jy ! Component: 750 - total flux cleaned = 0.0125198 Jy ! Component: 800 - total flux cleaned = 0.0132726 Jy ! Component: 850 - total flux cleaned = 0.014013 Jy ! Component: 900 - total flux cleaned = 0.0146373 Jy ! Component: 950 - total flux cleaned = 0.015355 Jy ! Component: 1000 - total flux cleaned = 0.015911 Jy ! Component: 1050 - total flux cleaned = 0.0165097 Jy ! Component: 1100 - total flux cleaned = 0.017051 Jy ! Component: 1150 - total flux cleaned = 0.0176343 Jy ! Component: 1200 - total flux cleaned = 0.018354 Jy ! Component: 1250 - total flux cleaned = 0.0188755 Jy ! Component: 1300 - total flux cleaned = 0.0193916 Jy ! Component: 1350 - total flux cleaned = 0.0199942 Jy ! Component: 1400 - total flux cleaned = 0.0205902 Jy ! Component: 1450 - total flux cleaned = 0.0212246 Jy ! Component: 1500 - total flux cleaned = 0.0218074 Jy ! Component: 1550 - total flux cleaned = 0.0224732 Jy ! Component: 1600 - total flux cleaned = 0.0230883 Jy ! Component: 1650 - total flux cleaned = 0.0236968 Jy ! Component: 1700 - total flux cleaned = 0.0243855 Jy ! Component: 1750 - total flux cleaned = 0.0250248 Jy ! Component: 1800 - total flux cleaned = 0.0255735 Jy ! Component: 1850 - total flux cleaned = 0.0262011 Jy ! Component: 1900 - total flux cleaned = 0.0268224 Jy ! Component: 1950 - total flux cleaned = 0.027274 Jy ! Component: 2000 - total flux cleaned = 0.0278438 Jy ! Total flux subtracted in 2048 components = 0.028449 Jy ! Clean residual min=-0.002114 max=0.002158 Jy/beam ! Clean residual mean=0.000238 rms=0.000760 Jy/beam ! Combined flux in latest and established models = 1.03225 Jy keep ! Adding 153 model components to the UV plane model. ! The established model now contains 409 components and 1.03225 Jy ![Exited script file: muppet] wmap "J0241-0815_X_2000_05_22_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9107 x 2.074 at 1.067 degrees (North through East) ! Clean map min=-0.0035496 max=0.20541 Jy/beam ! Writing clean map to FITS file: J0241-0815_X_2000_05_22_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.205412 invert ! Inverting map ! Your choice of large map pixels excluded 0.408% of the data. ! The x-axis pixel size should ideally be below 0.1897 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000762796 device "J0241-0815_X_2000_05_22_pus\_map.eps/VPS" ! Attempting to open device: 'J0241-0815_X_2000_05_22_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11405 1.11405 2.22809 4.45619 8.91238 17.8248 35.6495 71.299 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.205 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9107 x 2.074 at 1.067 degrees (North through East) ! Clean map min=-0.0035496 max=0.20541 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0241-0815_X_2000_05_22_pus\_map.gif/vgif" ! Attempting to open device: 'J0241-0815_X_2000_05_22_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J0241-0815_X_2000_05_22_pus_uvs.log closed on Mon Nov 12 17:19:58 2007