! Started logfile: J2202+4216_S_2000_03_13_pus_uvs.log on Wed Apr 3 14:40:30 2013 obs J2202+4216_S_2000_03_13_pus_uva.fits ! Reading UV FITS file: J2202+4216_S_2000_03_13_pus_uva.fits ! AN table 1: 68 integrations on 190 of 190 possible baselines. ! AN table 2: 129 integrations on 190 of 190 possible baselines. ! AN table 3: 174 integrations on 190 of 190 possible baselines. ! AN table 4: 183 integrations on 190 of 190 possible baselines. ! AN table 5: 41 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.140911 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2202+4216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2251 lines of history. ! ! Reading 63720 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2202+4216_S_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 944 telescope corrections were flagged in sub-array 1. ! A total of 1823 telescope corrections were flagged in sub-array 2. ! A total of 2704 telescope corrections were flagged in sub-array 3. ! A total of 2451 telescope corrections were flagged in sub-array 4. ! A total of 539 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 930 telescope corrections were flagged in sub-array 1. ! A total of 1823 telescope corrections were flagged in sub-array 2. ! A total of 2704 telescope corrections were flagged in sub-array 3. ! A total of 2434 telescope corrections were flagged in sub-array 4. ! A total of 539 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 930 telescope corrections were flagged in sub-array 1. ! A total of 1857 telescope corrections were flagged in sub-array 2. ! A total of 2713 telescope corrections were flagged in sub-array 3. ! A total of 2449 telescope corrections were flagged in sub-array 4. ! A total of 539 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 931 telescope corrections were flagged in sub-array 1. ! A total of 1823 telescope corrections were flagged in sub-array 2. ! A total of 2704 telescope corrections were flagged in sub-array 3. ! A total of 2429 telescope corrections were flagged in sub-array 4. ! A total of 539 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.411855Jy sigma=0.010616 ! Fit after self-cal, rms=0.917200Jy sigma=0.007010 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.939 mas, bmaj=2.563 mas, bpa=2.083 degrees ! Estimated noise=798.316 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.981305 Jy ! Component: 100 - total flux cleaned = 1.3859 Jy ! Total flux subtracted in 100 components = 1.3859 Jy ! Clean residual min=-0.034502 max=0.196626 Jy/beam ! Clean residual mean=0.000501 rms=0.010816 Jy/beam ! Combined flux in latest and established models = 1.3859 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.3859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.687240Jy sigma=0.005081 ! Fit after self-cal, rms=0.682395Jy sigma=0.005069 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.225326 Jy ! Component: 100 - total flux cleaned = 0.363698 Jy ! Total flux subtracted in 100 components = 0.363698 Jy ! Clean residual min=-0.028792 max=0.139784 Jy/beam ! Clean residual mean=0.000345 rms=0.007684 Jy/beam ! Combined flux in latest and established models = 1.7496 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 1.7496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.535083Jy sigma=0.003686 ! Fit after self-cal, rms=0.533185Jy sigma=0.003680 ! Inverting map ! Added new window around map position (1, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.133412 Jy ! Component: 100 - total flux cleaned = 0.216552 Jy ! Total flux subtracted in 100 components = 0.216552 Jy ! Clean residual min=-0.023229 max=0.050130 Jy/beam ! Clean residual mean=0.000250 rms=0.006165 Jy/beam ! Combined flux in latest and established models = 1.96615 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 1.96615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.467855Jy sigma=0.003014 ! Fit after self-cal, rms=0.464245Jy sigma=0.002993 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0703815 Jy ! Component: 100 - total flux cleaned = 0.122731 Jy ! Total flux subtracted in 100 components = 0.122731 Jy ! Clean residual min=-0.021149 max=0.040893 Jy/beam ! Clean residual mean=0.000196 rms=0.005523 Jy/beam ! Combined flux in latest and established models = 2.08888 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 2.08888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438548Jy sigma=0.002709 ! Fit after self-cal, rms=0.437350Jy sigma=0.002703 ! Inverting map ! Added new window around map position (3.5, -3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487058 Jy ! Component: 100 - total flux cleaned = 0.0875095 Jy ! Total flux subtracted in 100 components = 0.0875095 Jy ! Clean residual min=-0.021409 max=0.039978 Jy/beam ! Clean residual mean=0.000156 rms=0.005194 Jy/beam ! Combined flux in latest and established models = 2.17639 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 2.17639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.423084Jy sigma=0.002547 ! Fit after self-cal, rms=0.422328Jy sigma=0.002543 ! Inverting map ! Added new window around map position (2, -9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0416382 Jy ! Component: 100 - total flux cleaned = 0.0734228 Jy ! Total flux subtracted in 100 components = 0.0734228 Jy ! Clean residual min=-0.021773 max=0.034561 Jy/beam ! Clean residual mean=0.000118 rms=0.004940 Jy/beam ! Combined flux in latest and established models = 2.24981 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 58 components and 2.24981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.412640Jy sigma=0.002435 ! Fit after self-cal, rms=0.412028Jy sigma=0.002431 ! Inverting map ! Added new window around map position (-4, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337224 Jy ! Component: 100 - total flux cleaned = 0.0589544 Jy ! Total flux subtracted in 100 components = 0.0589544 Jy ! Clean residual min=-0.022100 max=0.029859 Jy/beam ! Clean residual mean=0.000090 rms=0.004760 Jy/beam ! Combined flux in latest and established models = 2.30877 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 2.30877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405535Jy sigma=0.002365 ! Fit after self-cal, rms=0.405380Jy sigma=0.002364 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.381 mas, bmaj=3.284 mas, bpa=-0.7405 degrees ! Estimated noise=413.029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584311 Jy ! Component: 100 - total flux cleaned = 0.0988631 Jy ! Component: 150 - total flux cleaned = 0.130027 Jy ! Component: 200 - total flux cleaned = 0.154368 Jy ! Total flux subtracted in 200 components = 0.154368 Jy ! Clean residual min=-0.025845 max=0.026065 Jy/beam ! Clean residual mean=0.000052 rms=0.006474 Jy/beam ! Combined flux in latest and established models = 2.46313 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 112 components and 2.46313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393935Jy sigma=0.002249 ! Fit after self-cal, rms=0.392987Jy sigma=0.002241 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 GC 1.12 KP 0.80 ! LA 0.99 NL 1.00 OV 1.03 PT 1.00* ! SC 1.11 WF 1.50 HH 0.40 KK 1.00* ! MA 1.00* MC 1.07 MK 1.00* NY 0.98 ! ON 1.03 TS 1.55 WZ 0.83 HN 1.08 ! ! A total of 180 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.91 FD 1.01 GC 1.08 KP 1.12 ! LA 0.98 NL 1.00 OV 0.99 PT 0.97 ! SC 1.08 WF 1.05 HH 1.00* KK 1.00* ! MA 1.00* MC 1.08 MK 0.99 NY 1.02 ! ON 0.90 TS 1.11 WZ 1.00* HN 1.00* ! ! A total of 105 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.09 GC 1.09 KP 1.07 ! LA 1.03 NL 0.93 OV 1.14 PT 1.03 ! SC 1.00 WF 0.99 HH 1.00* KK 1.00* ! MA 1.00* MC 0.99 MK 1.09 NY 1.10 ! ON 0.84 TS 1.05 WZ 0.90 HN 0.88 ! ! A total of 147 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 1.04 GC 1.09 KP 1.03 ! LA 0.99 NL 0.88 OV 1.06 PT 1.00 ! SC 1.04 WF 1.06 HH 0.50 KK 1.00* ! MA 1.00* MC 1.13 MK 0.99 NY 1.09 ! ON 0.88 TS 1.00* WZ 0.83 HN 1.05 ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.91 FD 0.97 GC 1.08 KP 0.91 ! LA 0.96 NL 0.97 OV 0.95 PT 0.94 ! SC 1.10 WF 1.02 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.98 NY 1.00 ! ON 0.85 TS 1.13 WZ 1.59 HN 1.00* ! ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 GC 1.12 KP 0.89 ! LA 0.96 NL 1.04 OV 0.99 PT 1.00* ! SC 1.19 WF 1.01 HH 0.93 KK 1.00* ! MA 1.00* MC 1.16 MK 1.00* NY 0.99 ! ON 0.89 TS 1.69 WZ 0.95 HN 1.09 ! ! A total of 180 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.98 GC 1.06 KP 1.00 ! LA 0.98 NL 1.01 OV 0.97 PT 0.98 ! SC 1.08 WF 1.01 HH 1.00* KK 1.00* ! MA 1.00* MC 0.96 MK 0.99 NY 1.02 ! ON 0.88 TS 1.10 WZ 1.00* HN 1.00* ! ! A total of 105 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.04 GC 1.09 KP 0.99 ! LA 1.04 NL 0.94 OV 1.12 PT 1.04 ! SC 1.02 WF 0.93 HH 1.00* KK 1.00* ! MA 1.00* MC 1.14 MK 1.10 NY 1.04 ! ON 0.87 TS 1.06 WZ 0.91 HN 0.90 ! ! A total of 144 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.02 GC 1.09 KP 0.99 ! LA 1.00 NL 0.89 OV 1.04 PT 1.00 ! SC 1.05 WF 1.04 HH 0.85 KK 1.00* ! MA 1.00* MC 1.08 MK 0.99 NY 1.06 ! ON 0.88 TS 1.00* WZ 0.84 HN 1.07 ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.94 GC 1.08 KP 0.92 ! LA 0.96 NL 0.99 OV 0.94 PT 0.96 ! SC 1.10 WF 0.96 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.99 NY 1.01 ! ON 0.83 TS 1.11 WZ 1.62 HN 1.00* ! ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 GC 1.09 KP 0.99 ! LA 0.97 NL 0.97 OV 1.02 PT 1.00* ! SC 1.20 WF 1.92 HH 1.19 KK 1.00* ! MA 1.00* MC 0.89 MK 1.00* NY 1.02 ! ON 0.83 TS 1.63 WZ 0.97 HN 1.14 ! ! A total of 180 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.94 FD 0.96 GC 1.05 KP 1.01 ! LA 0.98 NL 0.96 OV 1.00 PT 0.93 ! SC 1.05 WF 0.91 HH 1.00* KK 1.00* ! MA 1.00* MC 2.07 MK 0.98 NY 1.02 ! ON 0.94 TS 1.08 WZ 1.00* HN 1.00* ! ! A total of 96 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 GC 1.05 KP 1.03 ! LA 1.04 NL 0.90 OV 1.13 PT 0.99 ! SC 0.97 WF 1.33 HH 1.00* KK 1.00* ! MA 1.00* MC 0.70 MK 1.09 NY 1.05 ! ON 0.86 TS 1.02 WZ 0.89 HN 0.94 ! ! A total of 147 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.99 GC 1.08 KP 1.03 ! LA 0.99 NL 0.85 OV 1.06 PT 1.01 ! SC 1.01 WF 1.21 HH 0.94 KK 1.00* ! MA 1.00* MC 0.81 MK 0.98 NY 1.07 ! ON 0.88 TS 1.00* WZ 0.79 HN 1.06 ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 0.92 GC 1.08 KP 0.99 ! LA 0.95 NL 0.94 OV 0.97 PT 0.88 ! SC 1.09 WF 0.65 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.97 NY 1.02 ! ON 0.82 TS 1.09 WZ 1.51 HN 1.00* ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 GC 1.14 KP 0.95 ! LA 0.96 NL 0.99 OV 0.99 PT 1.00* ! SC 1.12 WF 1.03 HH 0.99 KK 1.00* ! MA 1.00* MC 1.18 MK 1.00* NY 0.99 ! ON 0.85 TS 1.55 WZ 0.87 HN 1.05 ! ! A total of 180 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 GC 1.06 KP 1.00 ! LA 0.96 NL 0.97 OV 0.97 PT 0.97 ! SC 1.04 WF 1.02 HH 1.00* KK 1.00* ! MA 1.00* MC 1.11 MK 0.98 NY 0.98 ! ON 0.87 TS 1.05 WZ 1.00* HN 1.00* ! ! A total of 105 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.04 GC 1.08 KP 1.01 ! LA 1.02 NL 0.91 OV 1.13 PT 0.97 ! SC 0.98 WF 0.96 HH 1.00* KK 1.00* ! MA 1.00* MC 0.89 MK 1.08 NY 1.00 ! ON 0.84 TS 1.05 WZ 0.86 HN 0.89 ! ! A total of 147 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.01 GC 1.07 KP 1.02 ! LA 0.99 NL 0.85 OV 1.03 PT 1.07 ! SC 1.02 WF 1.06 HH 1.09 KK 1.00* ! MA 1.00* MC 0.93 MK 1.00 NY 1.01 ! ON 0.88 TS 1.00* WZ 0.82 HN 1.02 ! ! A total of 36 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 0.95 GC 1.07 KP 0.96 ! LA 0.94 NL 0.96 OV 0.94 PT 0.82 ! SC 1.10 WF 1.02 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.96 NY 1.01 ! ON 0.79 TS 1.08 WZ 1.50 HN 1.00* ! ! ! Fit before self-cal, rms=0.392987Jy sigma=0.002241 ! Fit after self-cal, rms=0.317587Jy sigma=0.001776 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.379 mas, bmaj=3.3 mas, bpa=0.5864 degrees ! Estimated noise=416.469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017304 Jy ! Component: 100 - total flux cleaned = 0.0178745 Jy ! Component: 150 - total flux cleaned = 0.0186941 Jy ! Component: 200 - total flux cleaned = 0.0194416 Jy ! Total flux subtracted in 200 components = 0.0194416 Jy ! Clean residual min=-0.013704 max=0.014620 Jy/beam ! Clean residual mean=-0.000003 rms=0.003955 Jy/beam ! Combined flux in latest and established models = 2.48258 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 131 components and 2.48258 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315963Jy sigma=0.001758 ! Fit after self-cal, rms=0.315867Jy sigma=0.001756 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.315867Jy sigma=0.001756 ! Fit after self-cal, rms=0.269130Jy sigma=0.001435 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.382 mas, bmaj=3.303 mas, bpa=0.6147 degrees ! Estimated noise=416.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00696425 Jy ! Component: 100 - total flux cleaned = 0.00763165 Jy ! Component: 150 - total flux cleaned = 0.00871807 Jy ! Component: 200 - total flux cleaned = 0.00942052 Jy ! Total flux subtracted in 200 components = 0.00942052 Jy ! Clean residual min=-0.005637 max=0.013613 Jy/beam ! Clean residual mean=0.000424 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 2.492 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 142 components and 2.492 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.268452Jy sigma=0.001428 ! Fit after self-cal, rms=0.268312Jy sigma=0.001427 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, -13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014903 Jy ! Component: 100 - total flux cleaned = 0.0241864 Jy ! Component: 150 - total flux cleaned = 0.0264014 Jy ! Component: 200 - total flux cleaned = 0.0277765 Jy ! Total flux subtracted in 200 components = 0.0277765 Jy ! Clean residual min=-0.005796 max=0.008708 Jy/beam ! Clean residual mean=0.000270 rms=0.001769 Jy/beam ! Combined flux in latest and established models = 2.51977 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 164 components and 2.51977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267518Jy sigma=0.001415 ! Fit after self-cal, rms=0.267359Jy sigma=0.001414 ! Inverting map ! Added new window around map position (4.5, -26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102482 Jy ! Component: 100 - total flux cleaned = 0.016794 Jy ! Component: 150 - total flux cleaned = 0.0199037 Jy ! Component: 200 - total flux cleaned = 0.0214954 Jy ! Total flux subtracted in 200 components = 0.0214954 Jy ! Clean residual min=-0.006068 max=0.007656 Jy/beam ! Clean residual mean=0.000162 rms=0.001570 Jy/beam ! Combined flux in latest and established models = 2.54127 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 192 components and 2.54127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266955Jy sigma=0.001407 ! Fit after self-cal, rms=0.266896Jy sigma=0.001407 ! Inverting map ! Added new window around map position (14, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081298 Jy ! Component: 100 - total flux cleaned = 0.0116222 Jy ! Component: 150 - total flux cleaned = 0.0129524 Jy ! Component: 200 - total flux cleaned = 0.0141808 Jy ! Total flux subtracted in 200 components = 0.0141808 Jy ! Clean residual min=-0.006434 max=0.005394 Jy/beam ! Clean residual mean=0.000093 rms=0.001486 Jy/beam ! Combined flux in latest and established models = 2.55545 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 212 components and 2.55545 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266549Jy sigma=0.001403 ! Fit after self-cal, rms=0.266514Jy sigma=0.001403 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266514Jy sigma=0.001403 ! Fit after self-cal, rms=0.263797Jy sigma=0.001382 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.381 mas, bmaj=3.305 mas, bpa=0.6458 degrees ! Estimated noise=416.896 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00556217 Jy ! Component: 100 - total flux cleaned = 0.00766766 Jy ! Component: 150 - total flux cleaned = 0.00947732 Jy ! Component: 200 - total flux cleaned = 0.0109331 Jy ! Total flux subtracted in 200 components = 0.0109331 Jy ! Clean residual min=-0.004516 max=0.005063 Jy/beam ! Clean residual mean=0.000179 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 2.56638 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 218 components and 2.56638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263477Jy sigma=0.001378 ! Fit after self-cal, rms=0.263429Jy sigma=0.001377 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414421 Jy ! Component: 100 - total flux cleaned = 0.00501103 Jy ! Component: 150 - total flux cleaned = 0.00613863 Jy ! Component: 200 - total flux cleaned = 0.00734485 Jy ! Total flux subtracted in 200 components = 0.00734485 Jy ! Clean residual min=-0.004193 max=0.004531 Jy/beam ! Clean residual mean=0.000139 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 2.57373 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 231 components and 2.57373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263215Jy sigma=0.001375 ! Fit after self-cal, rms=0.263189Jy sigma=0.001375 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263189Jy sigma=0.001375 ! Fit after self-cal, rms=0.262973Jy sigma=0.001374 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.351 mas, bmaj=9.01 mas, bpa=44.08 degrees ! Estimated noise=595.843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104138 Jy ! Component: 100 - total flux cleaned = 0.0150978 Jy ! Component: 150 - total flux cleaned = 0.0177235 Jy ! Component: 200 - total flux cleaned = 0.0198904 Jy ! Total flux subtracted in 200 components = 0.0198904 Jy ! Clean residual min=-0.004170 max=0.006881 Jy/beam ! Clean residual mean=0.000326 rms=0.001621 Jy/beam ! Combined flux in latest and established models = 2.59362 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 266 components and 2.59362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262935Jy sigma=0.001373 ! Fit after self-cal, rms=0.262904Jy sigma=0.001372 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173288 Jy ! Component: 100 - total flux cleaned = 0.00318504 Jy ! Component: 150 - total flux cleaned = 0.00427899 Jy ! Component: 200 - total flux cleaned = 0.00509231 Jy ! Total flux subtracted in 200 components = 0.00509231 Jy ! Clean residual min=-0.003928 max=0.006422 Jy/beam ! Clean residual mean=0.000239 rms=0.001520 Jy/beam ! Combined flux in latest and established models = 2.59871 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 283 components and 2.59871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262896Jy sigma=0.001372 ! Fit after self-cal, rms=0.262880Jy sigma=0.001372 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.38 mas, bmaj=3.306 mas, bpa=0.6689 degrees ! Estimated noise=417.003 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.38 x 3.306 at 0.6689 degrees (North through East) ! Clean map min=-0.0041301 max=1.3609 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.262880Jy sigma=0.001372 ! Fit after self-cal, rms=0.245263Jy sigma=0.001251 ! Inverting map and beam ! Estimated beam: bmin=2.379 mas, bmaj=3.306 mas, bpa=0.7388 degrees ! Estimated noise=416.635 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146275 Jy ! Component: 100 - total flux cleaned = 0.00163548 Jy ! Component: 150 - total flux cleaned = 0.00178382 Jy ! Component: 200 - total flux cleaned = 0.0020613 Jy ! Total flux subtracted in 200 components = 0.0020613 Jy ! Clean residual min=-0.004343 max=0.003891 Jy/beam ! Clean residual mean=0.000148 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 2.60077 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 293 components and 2.60077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245050Jy sigma=0.001249 ! Fit after self-cal, rms=0.245043Jy sigma=0.001249 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000409292 Jy ! Component: 100 - total flux cleaned = 0.00053227 Jy ! Component: 150 - total flux cleaned = 0.000651968 Jy ! Component: 200 - total flux cleaned = 0.000767708 Jy ! Total flux subtracted in 200 components = 0.000767708 Jy ! Clean residual min=-0.004129 max=0.003807 Jy/beam ! Clean residual mean=0.000143 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 2.60154 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 299 components and 2.60154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244919Jy sigma=0.001248 ! Fit after self-cal, rms=0.244909Jy sigma=0.001248 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244909Jy sigma=0.001248 ! Fit after self-cal, rms=0.244591Jy sigma=0.001248 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.934 mas, bmaj=2.551 mas, bpa=4.322 degrees ! Estimated noise=798.211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.985738 Jy ! Component: 100 - total flux cleaned = 1.40064 Jy ! Component: 150 - total flux cleaned = 1.63247 Jy ! Component: 200 - total flux cleaned = 1.78395 Jy ! Total flux subtracted in 200 components = 1.78395 Jy ! Clean residual min=-0.013718 max=0.084401 Jy/beam ! Clean residual mean=0.000398 rms=0.005660 Jy/beam ! Combined flux in latest and established models = 1.78395 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 1.78395 Jy ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=3.306 mas, bpa=0.8041 degrees ! Estimated noise=416.489 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.222841 Jy ! Component: 100 - total flux cleaned = 0.360613 Jy ! Component: 150 - total flux cleaned = 0.453942 Jy ! Component: 200 - total flux cleaned = 0.520834 Jy ! Total flux subtracted in 200 components = 0.520834 Jy ! Clean residual min=-0.006315 max=0.037854 Jy/beam ! Clean residual mean=0.001790 rms=0.005173 Jy/beam ! Combined flux in latest and established models = 2.30478 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 99 components and 2.30478 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0494214 Jy ! Component: 100 - total flux cleaned = 0.0872677 Jy ! Component: 150 - total flux cleaned = 0.117041 Jy ! Component: 200 - total flux cleaned = 0.141074 Jy ! Total flux subtracted in 200 components = 0.141074 Jy ! Clean residual min=-0.003505 max=0.015332 Jy/beam ! Clean residual mean=0.000986 rms=0.002517 Jy/beam ! Combined flux in latest and established models = 2.44586 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 163 components and 2.44586 Jy ! Inverting map ! Added new window around map position (-0.5, -11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0197395 Jy ! Component: 100 - total flux cleaned = 0.0360639 Jy ! Component: 150 - total flux cleaned = 0.0499776 Jy ! Component: 200 - total flux cleaned = 0.062014 Jy ! Total flux subtracted in 200 components = 0.062014 Jy ! Clean residual min=-0.002763 max=0.008366 Jy/beam ! Clean residual mean=0.000646 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 2.50787 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 220 components and 2.50787 Jy ! Inverting map ! Added new window around map position (9.5, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106547 Jy ! Component: 100 - total flux cleaned = 0.0199486 Jy ! Component: 150 - total flux cleaned = 0.028169 Jy ! Component: 200 - total flux cleaned = 0.0354592 Jy ! Total flux subtracted in 200 components = 0.0354592 Jy ! Clean residual min=-0.002621 max=0.005622 Jy/beam ! Clean residual mean=0.000458 rms=0.001144 Jy/beam ! Combined flux in latest and established models = 2.54333 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 264 components and 2.54333 Jy ! Inverting map ! Added new window around map position (0.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00669364 Jy ! Component: 100 - total flux cleaned = 0.0125705 Jy ! Component: 150 - total flux cleaned = 0.0178509 Jy ! Component: 200 - total flux cleaned = 0.0226234 Jy ! Total flux subtracted in 200 components = 0.0226234 Jy ! Clean residual min=-0.002587 max=0.004587 Jy/beam ! Clean residual mean=0.000338 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 2.56595 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 294 components and 2.56595 Jy ! Inverting map ! Added new window around map position (11.5, -26.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480722 Jy ! Component: 100 - total flux cleaned = 0.00884696 Jy ! Component: 150 - total flux cleaned = 0.0125177 Jy ! Component: 200 - total flux cleaned = 0.0158648 Jy ! Total flux subtracted in 200 components = 0.0158648 Jy ! Clean residual min=-0.002469 max=0.003648 Jy/beam ! Clean residual mean=0.000256 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 2.58182 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 317 components and 2.58182 Jy ! Inverting map ! Added new window around map position (18.5, -32.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371278 Jy ! Component: 100 - total flux cleaned = 0.0066645 Jy ! Component: 150 - total flux cleaned = 0.00938204 Jy ! Component: 200 - total flux cleaned = 0.0115999 Jy ! Total flux subtracted in 200 components = 0.0115999 Jy ! Clean residual min=-0.002459 max=0.003257 Jy/beam ! Clean residual mean=0.000197 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 2.59342 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 332 components and 2.59342 Jy ! Inverting map ! Added new window around map position (21, -43). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276815 Jy ! Component: 100 - total flux cleaned = 0.0043289 Jy ! Component: 150 - total flux cleaned = 0.00580453 Jy ! Component: 200 - total flux cleaned = 0.00704012 Jy ! Total flux subtracted in 200 components = 0.00704012 Jy ! Clean residual min=-0.002444 max=0.003010 Jy/beam ! Clean residual mean=0.000160 rms=0.000680 Jy/beam ! Combined flux in latest and established models = 2.60046 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 347 components and 2.60046 Jy ! Inverting map ! Added new window around map position (5.5, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321534 Jy ! Component: 100 - total flux cleaned = 0.00456585 Jy ! Component: 150 - total flux cleaned = 0.00562976 Jy ! Component: 200 - total flux cleaned = 0.00664078 Jy ! Total flux subtracted in 200 components = 0.00664078 Jy ! Clean residual min=-0.002422 max=0.002627 Jy/beam ! Clean residual mean=0.000125 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 2.6071 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 360 components and 2.6071 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.349 mas, bmaj=9.012 mas, bpa=44.01 degrees ! Estimated noise=596.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00400435 Jy ! Component: 100 - total flux cleaned = 0.00685419 Jy ! Component: 150 - total flux cleaned = 0.00914438 Jy ! Component: 200 - total flux cleaned = 0.0107259 Jy ! Total flux subtracted in 200 components = 0.0107259 Jy ! Clean residual min=-0.002857 max=0.003458 Jy/beam ! Clean residual mean=0.000229 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 2.61782 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101532 Jy ! Component: 100 - total flux cleaned = 0.00194037 Jy ! Component: 150 - total flux cleaned = 0.00255422 Jy ! Component: 200 - total flux cleaned = 0.00301442 Jy ! Total flux subtracted in 200 components = 0.00301442 Jy ! Clean residual min=-0.002893 max=0.003283 Jy/beam ! Clean residual mean=0.000178 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 2.62084 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 423 components and 2.62084 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.377 mas, bmaj=3.306 mas, bpa=0.8041 degrees ! Estimated noise=416.489 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108237 Jy ! Component: 100 - total flux cleaned = -0.000913518 Jy ! Component: 150 - total flux cleaned = -0.000697714 Jy ! Component: 200 - total flux cleaned = -0.000495111 Jy ! Total flux subtracted in 200 components = -0.000495111 Jy ! Clean residual min=-0.002368 max=0.002405 Jy/beam ! Clean residual mean=0.000056 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 2.62034 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 436 components and 2.62034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243570Jy sigma=0.001242 ! Fit after self-cal, rms=0.243319Jy sigma=0.001240 wmodel J2202+4216_S_2000_03_13_pus_map.mod ! Writing 436 model components to file: J2202+4216_S_2000_03_13_pus_map.mod wobs J2202+4216_S_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J2202+4216_S_2000_03_13_pus_uvs.fits wwins J2202+4216_S_2000_03_13_pus_map.win ! wwins: Wrote 17 windows to J2202+4216_S_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523132 Jy ! Component: 100 - total flux cleaned = 0.00118572 Jy ! Component: 150 - total flux cleaned = 0.00190225 Jy ! Component: 200 - total flux cleaned = 0.00251899 Jy ! Component: 250 - total flux cleaned = 0.00311942 Jy ! Component: 300 - total flux cleaned = 0.00355901 Jy ! Component: 350 - total flux cleaned = 0.0040615 Jy ! Component: 400 - total flux cleaned = 0.00441499 Jy ! Component: 450 - total flux cleaned = 0.00476352 Jy ! Component: 500 - total flux cleaned = 0.0051082 Jy ! Component: 550 - total flux cleaned = 0.0054491 Jy ! Component: 600 - total flux cleaned = 0.00571916 Jy ! Component: 650 - total flux cleaned = 0.00601985 Jy ! Component: 700 - total flux cleaned = 0.00621827 Jy ! Component: 750 - total flux cleaned = 0.00648099 Jy ! Component: 800 - total flux cleaned = 0.0067411 Jy ! Component: 850 - total flux cleaned = 0.00696729 Jy ! Component: 900 - total flux cleaned = 0.00715972 Jy ! Component: 950 - total flux cleaned = 0.00741425 Jy ! Component: 1000 - total flux cleaned = 0.00763517 Jy ! Component: 1050 - total flux cleaned = 0.00785462 Jy ! Component: 1100 - total flux cleaned = 0.00804139 Jy ! Component: 1150 - total flux cleaned = 0.00819628 Jy ! Component: 1200 - total flux cleaned = 0.00835014 Jy ! Component: 1250 - total flux cleaned = 0.00859467 Jy ! Component: 1300 - total flux cleaned = 0.00880733 Jy ! Component: 1350 - total flux cleaned = 0.00889794 Jy ! Component: 1400 - total flux cleaned = 0.00910819 Jy ! Component: 1450 - total flux cleaned = 0.00928717 Jy ! Component: 1500 - total flux cleaned = 0.00943574 Jy ! Component: 1550 - total flux cleaned = 0.00955386 Jy ! Component: 1600 - total flux cleaned = 0.00975934 Jy ! Component: 1650 - total flux cleaned = 0.00978833 Jy ! Component: 1700 - total flux cleaned = 0.00993368 Jy ! Component: 1750 - total flux cleaned = 0.0100203 Jy ! Component: 1800 - total flux cleaned = 0.0100204 Jy ! Component: 1850 - total flux cleaned = 0.0102495 Jy ! Component: 1900 - total flux cleaned = 0.0103064 Jy ! Component: 1950 - total flux cleaned = 0.0103914 Jy ! Component: 2000 - total flux cleaned = 0.0104481 Jy ! Total flux subtracted in 2048 components = 0.0105042 Jy ! Clean residual min=-0.002026 max=0.001754 Jy/beam ! Clean residual mean=0.000017 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 2.63085 Jy keep ! Adding 164 model components to the UV plane model. ! The established model now contains 600 components and 2.63085 Jy ![Exited script file: muppet] wmap "J2202+4216_S_2000_03_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.377 x 3.306 at 0.8041 degrees (North through East) ! Clean map min=-0.0021858 max=1.3583 Jy/beam ! Writing clean map to FITS file: J2202+4216_S_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.35835 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000532571 device "J2202+4216_S_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J2202+4216_S_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.117622 0.117622 0.235244 0.470487 0.940974 1.88195 3.7639 7.52779 15.0556 30.1112 60.2223 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.358 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.377 x 3.306 at 0.8041 degrees (North through East) ! Clean map min=-0.0021858 max=1.3583 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J2202+4216_S_2000_03_13_pus_uvs.log closed on Wed Apr 3 14:41:02 2013