! Started logfile: J2148+0657_S_2000_03_13_pus_uvs.log on Tue Apr 2 15:23:23 2013 obs J2148+0657_S_2000_03_13_pus_uva.fits ! Reading UV FITS file: J2148+0657_S_2000_03_13_pus_uva.fits ! AN table 1: 112 integrations on 190 of 190 possible baselines. ! AN table 2: 174 integrations on 190 of 190 possible baselines. ! AN table 3: 70 integrations on 190 of 190 possible baselines. ! AN table 4: 96 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.103435 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2148+0657 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2247 lines of history. ! ! Reading 35532 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2148+0657_S_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1487 telescope corrections were flagged in sub-array 1. ! A total of 2627 telescope corrections were flagged in sub-array 2. ! A total of 1055 telescope corrections were flagged in sub-array 3. ! A total of 1559 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1487 telescope corrections were flagged in sub-array 1. ! A total of 2626 telescope corrections were flagged in sub-array 2. ! A total of 1055 telescope corrections were flagged in sub-array 3. ! A total of 1559 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1487 telescope corrections were flagged in sub-array 1. ! A total of 2627 telescope corrections were flagged in sub-array 2. ! A total of 1056 telescope corrections were flagged in sub-array 3. ! A total of 1560 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1487 telescope corrections were flagged in sub-array 1. ! A total of 2621 telescope corrections were flagged in sub-array 2. ! A total of 1055 telescope corrections were flagged in sub-array 3. ! A total of 1559 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.776482Jy sigma=0.013593 ! Fit after self-cal, rms=1.317144Jy sigma=0.009518 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.975 mas, bmaj=4.058 mas, bpa=1.846 degrees ! Estimated noise=839.295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.45478 Jy ! Component: 100 - total flux cleaned = 1.86255 Jy ! Total flux subtracted in 100 components = 1.86255 Jy ! Clean residual min=-0.061670 max=0.189605 Jy/beam ! Clean residual mean=-0.000018 rms=0.012695 Jy/beam ! Combined flux in latest and established models = 1.86255 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.86255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.829213Jy sigma=0.004962 ! Fit after self-cal, rms=0.829037Jy sigma=0.004961 ! Inverting map ! Added new window around map position (4.5, -4.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.221922 Jy ! Component: 100 - total flux cleaned = 0.371713 Jy ! Total flux subtracted in 100 components = 0.371713 Jy ! Clean residual min=-0.053860 max=0.101930 Jy/beam ! Clean residual mean=-0.000020 rms=0.009590 Jy/beam ! Combined flux in latest and established models = 2.23426 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 2.23426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.732166Jy sigma=0.003815 ! Fit after self-cal, rms=0.726101Jy sigma=0.003771 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120498 Jy ! Component: 100 - total flux cleaned = 0.205763 Jy ! Total flux subtracted in 100 components = 0.205763 Jy ! Clean residual min=-0.044607 max=0.067622 Jy/beam ! Clean residual mean=-0.000023 rms=0.008194 Jy/beam ! Combined flux in latest and established models = 2.44002 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 2.44002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.689632Jy sigma=0.003300 ! Fit after self-cal, rms=0.687469Jy sigma=0.003283 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0718525 Jy ! Component: 100 - total flux cleaned = 0.126097 Jy ! Total flux subtracted in 100 components = 0.126097 Jy ! Clean residual min=-0.040571 max=0.051278 Jy/beam ! Clean residual mean=-0.000025 rms=0.007632 Jy/beam ! Combined flux in latest and established models = 2.56612 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 44 components and 2.56612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.671431Jy sigma=0.003069 ! Fit after self-cal, rms=0.670791Jy sigma=0.003064 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.362 mas, bmaj=4.545 mas, bpa=-0.6318 degrees ! Estimated noise=550.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939212 Jy ! Component: 100 - total flux cleaned = 0.156058 Jy ! Component: 150 - total flux cleaned = 0.199644 Jy ! Component: 200 - total flux cleaned = 0.230854 Jy ! Total flux subtracted in 200 components = 0.230854 Jy ! Clean residual min=-0.037966 max=0.046560 Jy/beam ! Clean residual mean=0.000944 rms=0.008464 Jy/beam ! Combined flux in latest and established models = 2.79697 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 68 components and 2.79697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.652887Jy sigma=0.002856 ! Fit after self-cal, rms=0.652100Jy sigma=0.002848 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.01 GC 1.00* KP 1.21 ! LA 0.98 NL 0.71 OV 1.00* PT 0.95 ! SC 1.05 WF 1.10 HH 1.16 KK 1.00* ! MA 1.00* MC 0.99 MK 1.00* NY 1.16 ! ON 0.85 TS 1.00* WZ 0.78 HN 1.06 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 GC 1.09 KP 0.95 ! LA 1.01 NL 1.03 OV 1.07 PT 0.98 ! SC 0.98 WF 1.12 HH 0.83 KK 1.00* ! MA 1.00* MC 0.98 MK 1.04 NY 1.02 ! ON 0.91 TS 1.00* WZ 0.98 HN 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.02 GC 1.04 KP 1.05 ! LA 1.02 NL 1.02 OV 1.05 PT 0.99 ! SC 1.00 WF 1.10 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.06 WZ 1.00* HN 1.00* ! ! A total of 186 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 FD 1.03 GC 1.04 KP 1.02 ! LA 1.00 NL 0.99 OV 1.02 PT 0.99 ! SC 1.09 WF 1.09 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.00 NY 1.00* ! ON 1.00* TS 1.06 WZ 1.00* HN 1.00* ! ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 GC 1.00* KP 1.06 ! LA 0.97 NL 0.74 OV 1.00* PT 0.95 ! SC 1.04 WF 1.03 HH 1.10 KK 1.00* ! MA 1.00* MC 0.95 MK 1.00* NY 1.13 ! ON 0.86 TS 1.00* WZ 0.78 HN 1.06 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.97 GC 1.08 KP 0.97 ! LA 1.01 NL 1.05 OV 1.05 PT 0.99 ! SC 0.98 WF 1.04 HH 0.80 KK 1.00* ! MA 1.00* MC 0.88 MK 1.04 NY 1.04 ! ON 0.91 TS 1.00* WZ 0.96 HN 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.98 GC 1.03 KP 0.99 ! LA 1.01 NL 1.03 OV 1.03 PT 1.00 ! SC 1.00 WF 1.01 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.02 NY 1.00* ! ON 1.00* TS 1.04 WZ 1.00* HN 1.00* ! ! A total of 186 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.99 GC 1.03 KP 0.99 ! LA 0.99 NL 1.00 OV 0.99 PT 1.00 ! SC 1.10 WF 1.01 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.04 WZ 1.00* HN 1.00* ! ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 GC 1.00* KP 1.04 ! LA 0.97 NL 0.70 OV 1.00* PT 0.93 ! SC 0.96 WF 0.87 HH 1.09 KK 1.00* ! MA 1.00* MC 1.76 MK 1.00* NY 1.13 ! ON 0.83 TS 1.00* WZ 0.75 HN 1.00 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.94 GC 1.08 KP 1.05 ! LA 1.01 NL 0.98 OV 1.06 PT 0.87 ! SC 0.94 WF 1.83 HH 0.56 KK 1.00* ! MA 1.00* MC 1.80 MK 1.02 NY 1.01 ! ON 0.90 TS 1.00* WZ 0.93 HN 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.95 GC 1.00 KP 1.02 ! LA 0.99 NL 0.97 OV 1.03 PT 0.93 ! SC 0.96 WF 1.85 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.01 WZ 1.00* HN 1.00* ! ! A total of 186 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.93 FD 0.94 GC 0.99 KP 1.02 ! LA 0.99 NL 0.95 OV 1.01 PT 0.96 ! SC 1.05 WF 0.72 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.98 NY 1.00* ! ON 1.00* TS 1.02 WZ 1.00* HN 1.00* ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 GC 1.00* KP 1.04 ! LA 0.95 NL 0.68 OV 1.00* PT 0.96 ! SC 0.99 WF 1.03 HH 1.09 KK 1.00* ! MA 1.00* MC 1.57 MK 1.00* NY 1.08 ! ON 0.84 TS 1.00* WZ 0.77 HN 1.02 ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 GC 1.07 KP 0.97 ! LA 0.99 NL 0.99 OV 1.03 PT 0.76 ! SC 0.94 WF 1.04 HH 1.88 KK 1.00* ! MA 1.00* MC 2.09 MK 1.00 NY 0.98 ! ON 0.89 TS 1.00* WZ 0.93 HN 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 GC 0.99 KP 0.99 ! LA 1.00 NL 0.97 OV 1.01 PT 0.94 ! SC 0.96 WF 1.00 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.00 NY 1.00* ! ON 1.00* TS 1.02 WZ 1.00* HN 1.00* ! ! A total of 186 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.96 GC 1.00 KP 0.98 ! LA 0.97 NL 0.95 OV 0.98 PT 1.07 ! SC 1.05 WF 1.01 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.98 NY 1.00* ! ON 1.00* TS 1.02 WZ 1.00* HN 1.00* ! ! ! Fit before self-cal, rms=0.652100Jy sigma=0.002848 ! Fit after self-cal, rms=0.619616Jy sigma=0.002071 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.403 mas, bmaj=4.621 mas, bpa=-1.643 degrees ! Estimated noise=567.518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (23.5, -70). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0458182 Jy ! Component: 100 - total flux cleaned = 0.0691982 Jy ! Component: 150 - total flux cleaned = 0.0811142 Jy ! Component: 200 - total flux cleaned = 0.087331 Jy ! Total flux subtracted in 200 components = 0.087331 Jy ! Clean residual min=-0.014271 max=0.026074 Jy/beam ! Clean residual mean=0.001640 rms=0.004094 Jy/beam ! Combined flux in latest and established models = 2.88431 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 107 components and 2.8843 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.615375Jy sigma=0.002008 ! Fit after self-cal, rms=0.616043Jy sigma=0.002000 ! Inverting map ! Added new window around map position (25, -52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268345 Jy ! Component: 100 - total flux cleaned = 0.0406543 Jy ! Component: 150 - total flux cleaned = 0.0470861 Jy ! Component: 200 - total flux cleaned = 0.0515684 Jy ! Total flux subtracted in 200 components = 0.0515684 Jy ! Clean residual min=-0.012940 max=0.020831 Jy/beam ! Clean residual mean=0.001529 rms=0.003767 Jy/beam ! Combined flux in latest and established models = 2.93587 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 137 components and 2.93587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.613910Jy sigma=0.001974 ! Fit after self-cal, rms=0.613709Jy sigma=0.001971 ! Inverting map ! Added new window around map position (27.5, -39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212245 Jy ! Component: 100 - total flux cleaned = 0.0294961 Jy ! Component: 150 - total flux cleaned = 0.0357854 Jy ! Component: 200 - total flux cleaned = 0.0405807 Jy ! Total flux subtracted in 200 components = 0.0405807 Jy ! Clean residual min=-0.012861 max=0.015585 Jy/beam ! Clean residual mean=0.001437 rms=0.003555 Jy/beam ! Combined flux in latest and established models = 2.97645 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 159 components and 2.97645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.612126Jy sigma=0.001955 ! Fit after self-cal, rms=0.612053Jy sigma=0.001954 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.612053Jy sigma=0.001954 ! Fit after self-cal, rms=0.541831Jy sigma=0.001729 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.413 mas, bmaj=4.615 mas, bpa=-1.573 degrees ! Estimated noise=568.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00620831 Jy ! Component: 100 - total flux cleaned = 0.00849631 Jy ! Component: 150 - total flux cleaned = 0.0109269 Jy ! Component: 200 - total flux cleaned = 0.0138985 Jy ! Total flux subtracted in 200 components = 0.0138985 Jy ! Clean residual min=-0.008895 max=0.010546 Jy/beam ! Clean residual mean=0.000559 rms=0.002370 Jy/beam ! Combined flux in latest and established models = 2.99035 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 180 components and 2.99035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541027Jy sigma=0.001717 ! Fit after self-cal, rms=0.542361Jy sigma=0.001714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.5, -52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00768017 Jy ! Component: 100 - total flux cleaned = 0.00978269 Jy ! Component: 150 - total flux cleaned = 0.0126712 Jy ! Component: 200 - total flux cleaned = 0.0156053 Jy ! Total flux subtracted in 200 components = 0.0156053 Jy ! Clean residual min=-0.008622 max=0.010103 Jy/beam ! Clean residual mean=0.000529 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 3.00596 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 195 components and 3.00596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541954Jy sigma=0.001708 ! Fit after self-cal, rms=0.541937Jy sigma=0.001708 ! Inverting map ! Added new window around map position (66, -110.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00715124 Jy ! Component: 100 - total flux cleaned = 0.00886258 Jy ! Component: 150 - total flux cleaned = 0.0115109 Jy ! Component: 200 - total flux cleaned = 0.01422 Jy ! Total flux subtracted in 200 components = 0.01422 Jy ! Clean residual min=-0.008763 max=0.009452 Jy/beam ! Clean residual mean=0.000497 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 3.02018 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 211 components and 3.02018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541595Jy sigma=0.001703 ! Fit after self-cal, rms=0.541607Jy sigma=0.001703 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.541607Jy sigma=0.001703 ! Fit after self-cal, rms=0.534881Jy sigma=0.001660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=4.618 mas, bpa=-1.583 degrees ! Estimated noise=568.563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000728996 Jy ! Component: 100 - total flux cleaned = 0.00163764 Jy ! Component: 150 - total flux cleaned = 0.00244075 Jy ! Component: 200 - total flux cleaned = 0.00317056 Jy ! Total flux subtracted in 200 components = 0.00317056 Jy ! Clean residual min=-0.006829 max=0.007738 Jy/beam ! Clean residual mean=0.000426 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 3.02335 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 225 components and 3.02335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534553Jy sigma=0.001656 ! Fit after self-cal, rms=0.534576Jy sigma=0.001656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18, 0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00593873 Jy ! Component: 100 - total flux cleaned = 0.00785635 Jy ! Component: 150 - total flux cleaned = 0.00940019 Jy ! Component: 200 - total flux cleaned = 0.0106438 Jy ! Total flux subtracted in 200 components = 0.0106438 Jy ! Clean residual min=-0.006499 max=0.007305 Jy/beam ! Clean residual mean=0.000400 rms=0.001541 Jy/beam ! Combined flux in latest and established models = 3.03399 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 234 components and 3.03399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534316Jy sigma=0.001653 ! Fit after self-cal, rms=0.534304Jy sigma=0.001653 ! Inverting map ! Added new window around map position (1, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771892 Jy ! Component: 100 - total flux cleaned = 0.012514 Jy ! Component: 150 - total flux cleaned = 0.014656 Jy ! Component: 200 - total flux cleaned = 0.0163142 Jy ! Total flux subtracted in 200 components = 0.0163142 Jy ! Clean residual min=-0.006720 max=0.006642 Jy/beam ! Clean residual mean=0.000352 rms=0.001461 Jy/beam ! Combined flux in latest and established models = 3.05031 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 249 components and 3.05031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534090Jy sigma=0.001650 ! Fit after self-cal, rms=0.534086Jy sigma=0.001650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534086Jy sigma=0.001650 ! Fit after self-cal, rms=0.533210Jy sigma=0.001649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.184 mas, bmaj=9.237 mas, bpa=3.196 degrees ! Estimated noise=731.095 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717747 Jy ! Component: 100 - total flux cleaned = 0.0107123 Jy ! Component: 150 - total flux cleaned = 0.0141014 Jy ! Component: 200 - total flux cleaned = 0.0173512 Jy ! Total flux subtracted in 200 components = 0.0173512 Jy ! Clean residual min=-0.006203 max=0.009533 Jy/beam ! Clean residual mean=0.000862 rms=0.002026 Jy/beam ! Combined flux in latest and established models = 3.06766 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 282 components and 3.06766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533176Jy sigma=0.001647 ! Fit after self-cal, rms=0.533167Jy sigma=0.001647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, -45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00891217 Jy ! Component: 100 - total flux cleaned = 0.0134044 Jy ! Component: 150 - total flux cleaned = 0.0168806 Jy ! Component: 200 - total flux cleaned = 0.01999 Jy ! Total flux subtracted in 200 components = 0.01999 Jy ! Clean residual min=-0.005576 max=0.006962 Jy/beam ! Clean residual mean=0.000717 rms=0.001834 Jy/beam ! Combined flux in latest and established models = 3.08765 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 327 components and 3.08765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533036Jy sigma=0.001646 ! Fit after self-cal, rms=0.533035Jy sigma=0.001646 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=4.623 mas, bpa=-1.62 degrees ! Estimated noise=568.437 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.421 x 4.623 at -1.62 degrees (North through East) ! Clean map min=-0.0056561 max=1.9134 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533035Jy sigma=0.001646 ! Fit after self-cal, rms=0.532817Jy sigma=0.001413 ! Inverting map and beam ! Estimated beam: bmin=2.42 mas, bmaj=4.618 mas, bpa=-1.585 degrees ! Estimated noise=567.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000927191 Jy ! Component: 100 - total flux cleaned = -6.04344e-05 Jy ! Component: 150 - total flux cleaned = 0.000926225 Jy ! Component: 200 - total flux cleaned = 0.00146984 Jy ! Total flux subtracted in 200 components = 0.00146984 Jy ! Clean residual min=-0.005512 max=0.005366 Jy/beam ! Clean residual mean=0.000129 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 3.08912 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 348 components and 3.08912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532613Jy sigma=0.001411 ! Fit after self-cal, rms=0.532614Jy sigma=0.001411 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165385 Jy ! Component: 100 - total flux cleaned = 0.00265995 Jy ! Component: 150 - total flux cleaned = 0.00313455 Jy ! Component: 200 - total flux cleaned = 0.00359069 Jy ! Total flux subtracted in 200 components = 0.00359069 Jy ! Clean residual min=-0.005486 max=0.005295 Jy/beam ! Clean residual mean=0.000120 rms=0.001151 Jy/beam ! Combined flux in latest and established models = 3.09271 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 363 components and 3.09271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532489Jy sigma=0.001409 ! Fit after self-cal, rms=0.532490Jy sigma=0.001409 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.532490Jy sigma=0.001409 ! Fit after self-cal, rms=0.530575Jy sigma=0.001409 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.996 mas, bmaj=4.013 mas, bpa=2.155 degrees ! Estimated noise=850.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.46569 Jy ! Component: 100 - total flux cleaned = 1.88084 Jy ! Component: 150 - total flux cleaned = 2.11815 Jy ! Component: 200 - total flux cleaned = 2.27573 Jy ! Total flux subtracted in 200 components = 2.27573 Jy ! Clean residual min=-0.023553 max=0.090738 Jy/beam ! Clean residual mean=0.000011 rms=0.006261 Jy/beam ! Combined flux in latest and established models = 2.27573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 2.27573 Jy ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=4.62 mas, bpa=-1.584 degrees ! Estimated noise=567.397 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174433 Jy ! Component: 100 - total flux cleaned = 0.276168 Jy ! Component: 150 - total flux cleaned = 0.346445 Jy ! Component: 200 - total flux cleaned = 0.401464 Jy ! Total flux subtracted in 200 components = 0.401464 Jy ! Clean residual min=-0.011821 max=0.032992 Jy/beam ! Clean residual mean=0.001248 rms=0.005205 Jy/beam ! Combined flux in latest and established models = 2.67719 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 85 components and 2.67719 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0451417 Jy ! Component: 100 - total flux cleaned = 0.0828739 Jy ! Component: 150 - total flux cleaned = 0.114677 Jy ! Component: 200 - total flux cleaned = 0.141731 Jy ! Total flux subtracted in 200 components = 0.141731 Jy ! Clean residual min=-0.008350 max=0.017139 Jy/beam ! Clean residual mean=0.000865 rms=0.003203 Jy/beam ! Combined flux in latest and established models = 2.81892 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 148 components and 2.81892 Jy ! Inverting map ! Added new window around map position (6.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233835 Jy ! Component: 100 - total flux cleaned = 0.0437068 Jy ! Component: 150 - total flux cleaned = 0.0616322 Jy ! Component: 200 - total flux cleaned = 0.077592 Jy ! Total flux subtracted in 200 components = 0.077592 Jy ! Clean residual min=-0.007187 max=0.011180 Jy/beam ! Clean residual mean=0.000655 rms=0.002280 Jy/beam ! Combined flux in latest and established models = 2.89651 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 205 components and 2.89651 Jy ! Inverting map ! Added new window around map position (32.5, -41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144308 Jy ! Component: 100 - total flux cleaned = 0.0273082 Jy ! Component: 150 - total flux cleaned = 0.038939 Jy ! Component: 200 - total flux cleaned = 0.0495329 Jy ! Total flux subtracted in 200 components = 0.0495329 Jy ! Clean residual min=-0.006321 max=0.008425 Jy/beam ! Clean residual mean=0.000521 rms=0.001790 Jy/beam ! Combined flux in latest and established models = 2.94605 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 244 components and 2.94605 Jy ! Inverting map ! Added new window around map position (28, -70.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010014 Jy ! Component: 100 - total flux cleaned = 0.0190834 Jy ! Component: 150 - total flux cleaned = 0.0275265 Jy ! Component: 200 - total flux cleaned = 0.0353915 Jy ! Total flux subtracted in 200 components = 0.0353915 Jy ! Clean residual min=-0.005678 max=0.006929 Jy/beam ! Clean residual mean=0.000424 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 2.98144 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 269 components and 2.98144 Jy ! Inverting map ! Added new window around map position (-38.5, 37.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00770411 Jy ! Component: 100 - total flux cleaned = 0.0146335 Jy ! Component: 150 - total flux cleaned = 0.021138 Jy ! Component: 200 - total flux cleaned = 0.0272647 Jy ! Total flux subtracted in 200 components = 0.0272647 Jy ! Clean residual min=-0.005271 max=0.005877 Jy/beam ! Clean residual mean=0.000349 rms=0.001340 Jy/beam ! Combined flux in latest and established models = 3.0087 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 294 components and 3.0087 Jy ! Inverting map ! Added new window around map position (-88.5, -81). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062418 Jy ! Component: 100 - total flux cleaned = 0.0117886 Jy ! Component: 150 - total flux cleaned = 0.0170564 Jy ! Component: 200 - total flux cleaned = 0.0220578 Jy ! Total flux subtracted in 200 components = 0.0220578 Jy ! Clean residual min=-0.004928 max=0.004994 Jy/beam ! Clean residual mean=0.000289 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 3.03076 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 318 components and 3.03076 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.183 mas, bmaj=9.241 mas, bpa=3.377 degrees ! Estimated noise=729.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00981924 Jy ! Component: 100 - total flux cleaned = 0.0177091 Jy ! Component: 150 - total flux cleaned = 0.0245052 Jy ! Component: 200 - total flux cleaned = 0.0305283 Jy ! Total flux subtracted in 200 components = 0.0305283 Jy ! Clean residual min=-0.004790 max=0.005828 Jy/beam ! Clean residual mean=0.000560 rms=0.001596 Jy/beam ! Combined flux in latest and established models = 3.06129 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536598 Jy ! Component: 100 - total flux cleaned = 0.0101773 Jy ! Component: 150 - total flux cleaned = 0.0145161 Jy ! Component: 200 - total flux cleaned = 0.0184521 Jy ! Total flux subtracted in 200 components = 0.0184521 Jy ! Clean residual min=-0.004254 max=0.005683 Jy/beam ! Clean residual mean=0.000425 rms=0.001385 Jy/beam ! Combined flux in latest and established models = 3.07974 Jy ! Adding 142 model components to the UV plane model. ! The established model now contains 450 components and 3.07974 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.421 mas, bmaj=4.62 mas, bpa=-1.584 degrees ! Estimated noise=567.397 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138702 Jy ! Component: 100 - total flux cleaned = 0.00368936 Jy ! Component: 150 - total flux cleaned = 0.00533589 Jy ! Component: 200 - total flux cleaned = 0.00690706 Jy ! Total flux subtracted in 200 components = 0.00690706 Jy ! Clean residual min=-0.004291 max=0.004771 Jy/beam ! Clean residual mean=0.000136 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 3.08665 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 474 components and 3.08665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.529857Jy sigma=0.001403 ! Fit after self-cal, rms=0.529649Jy sigma=0.001402 wmodel J2148+0657_S_2000_03_13_pus_map.mod ! Writing 474 model components to file: J2148+0657_S_2000_03_13_pus_map.mod wobs J2148+0657_S_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J2148+0657_S_2000_03_13_pus_uvs.fits wwins J2148+0657_S_2000_03_13_pus_map.win ! wwins: Wrote 16 windows to J2148+0657_S_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000285654 Jy ! Component: 100 - total flux cleaned = 0.000517411 Jy ! Component: 150 - total flux cleaned = 0.000891972 Jy ! Component: 200 - total flux cleaned = 0.00118236 Jy ! Component: 250 - total flux cleaned = 0.00132463 Jy ! Component: 300 - total flux cleaned = 0.00146428 Jy ! Component: 350 - total flux cleaned = 0.00160169 Jy ! Component: 400 - total flux cleaned = 0.00160282 Jy ! Component: 450 - total flux cleaned = 0.00187114 Jy ! Component: 500 - total flux cleaned = 0.00213554 Jy ! Component: 550 - total flux cleaned = 0.0021357 Jy ! Component: 600 - total flux cleaned = 0.00252452 Jy ! Component: 650 - total flux cleaned = 0.00265335 Jy ! Component: 700 - total flux cleaned = 0.00297155 Jy ! Component: 750 - total flux cleaned = 0.00328748 Jy ! Component: 800 - total flux cleaned = 0.0035377 Jy ! Component: 850 - total flux cleaned = 0.0036001 Jy ! Component: 900 - total flux cleaned = 0.00390911 Jy ! Component: 950 - total flux cleaned = 0.00415501 Jy ! Component: 1000 - total flux cleaned = 0.00433792 Jy ! Component: 1050 - total flux cleaned = 0.00452016 Jy ! Component: 1100 - total flux cleaned = 0.00476101 Jy ! Component: 1150 - total flux cleaned = 0.00517921 Jy ! Component: 1200 - total flux cleaned = 0.00541679 Jy ! Component: 1250 - total flux cleaned = 0.00571184 Jy ! Component: 1300 - total flux cleaned = 0.005947 Jy ! Component: 1350 - total flux cleaned = 0.00618035 Jy ! Component: 1400 - total flux cleaned = 0.00652942 Jy ! Component: 1450 - total flux cleaned = 0.00687582 Jy ! Component: 1500 - total flux cleaned = 0.00704826 Jy ! Component: 1550 - total flux cleaned = 0.00716268 Jy ! Component: 1600 - total flux cleaned = 0.00750473 Jy ! Component: 1650 - total flux cleaned = 0.00795785 Jy ! Component: 1700 - total flux cleaned = 0.00829585 Jy ! Component: 1750 - total flux cleaned = 0.00823945 Jy ! Component: 1800 - total flux cleaned = 0.00868645 Jy ! Component: 1850 - total flux cleaned = 0.00874185 Jy ! Component: 1900 - total flux cleaned = 0.00912963 Jy ! Component: 1950 - total flux cleaned = 0.00918464 Jy ! Component: 2000 - total flux cleaned = 0.0094046 Jy ! Component: 2050 - total flux cleaned = 0.00962383 Jy ! Component: 2100 - total flux cleaned = 0.00984171 Jy ! Component: 2150 - total flux cleaned = 0.0100045 Jy ! Component: 2200 - total flux cleaned = 0.010383 Jy ! Component: 2250 - total flux cleaned = 0.0105982 Jy ! Component: 2300 - total flux cleaned = 0.010759 Jy ! Component: 2350 - total flux cleaned = 0.0108659 Jy ! Component: 2400 - total flux cleaned = 0.0113452 Jy ! Component: 2450 - total flux cleaned = 0.0113449 Jy ! Component: 2500 - total flux cleaned = 0.0117151 Jy ! Component: 2550 - total flux cleaned = 0.0118731 Jy ! Component: 2600 - total flux cleaned = 0.0121358 Jy ! Component: 2650 - total flux cleaned = 0.0121357 Jy ! Component: 2700 - total flux cleaned = 0.0125009 Jy ! Component: 2750 - total flux cleaned = 0.0127611 Jy ! Component: 2800 - total flux cleaned = 0.0129686 Jy ! Component: 2850 - total flux cleaned = 0.0131236 Jy ! Component: 2900 - total flux cleaned = 0.013278 Jy ! Component: 2950 - total flux cleaned = 0.013432 Jy ! Component: 3000 - total flux cleaned = 0.0135344 Jy ! Component: 3050 - total flux cleaned = 0.0139423 Jy ! Component: 3100 - total flux cleaned = 0.0140439 Jy ! Component: 3150 - total flux cleaned = 0.0140947 Jy ! Component: 3200 - total flux cleaned = 0.0144482 Jy ! Component: 3250 - total flux cleaned = 0.0144985 Jy ! Component: 3300 - total flux cleaned = 0.0147996 Jy ! Component: 3350 - total flux cleaned = 0.0148497 Jy ! Component: 3400 - total flux cleaned = 0.0149495 Jy ! Component: 3450 - total flux cleaned = 0.0153475 Jy ! Component: 3500 - total flux cleaned = 0.0153475 Jy ! Component: 3550 - total flux cleaned = 0.0154959 Jy ! Component: 3600 - total flux cleaned = 0.0156439 Jy ! Component: 3650 - total flux cleaned = 0.0158406 Jy ! Component: 3700 - total flux cleaned = 0.0159388 Jy ! Component: 3750 - total flux cleaned = 0.0160368 Jy ! Component: 3800 - total flux cleaned = 0.0159392 Jy ! Component: 3850 - total flux cleaned = 0.0161826 Jy ! Component: 3900 - total flux cleaned = 0.0164252 Jy ! Component: 3950 - total flux cleaned = 0.0167154 Jy ! Component: 4000 - total flux cleaned = 0.016667 Jy ! Component: 4050 - total flux cleaned = 0.0169076 Jy ! Total flux subtracted in 4096 components = 0.0168597 Jy ! Clean residual min=-0.002491 max=0.002812 Jy/beam ! Clean residual mean=0.000092 rms=0.000834 Jy/beam ! Combined flux in latest and established models = 3.10351 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 816 components and 3.10351 Jy ![Exited script file: muppet] wmap "J2148+0657_S_2000_03_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.421 x 4.62 at -1.584 degrees (North through East) ! Clean map min=-0.0033906 max=1.9198 Jy/beam ! Writing clean map to FITS file: J2148+0657_S_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.91982 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00083366 device "J2148+0657_S_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J2148+0657_S_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.130271 0.130271 0.260543 0.521085 1.04217 2.08434 4.16868 8.33737 16.6747 33.3495 66.6989 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0025 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.919 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.421 x 4.62 at -1.584 degrees (North through East) ! Clean map min=-0.0033906 max=1.9198 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J2148+0657_S_2000_03_13_pus_uvs.log closed on Tue Apr 2 15:24:03 2013