! Started logfile: J1800+7828_S_2000_03_13_pus_uvs.log on Wed Apr 3 13:46:51 2013 obs J1800+7828_S_2000_03_13_pus_uva.fits ! Reading UV FITS file: J1800+7828_S_2000_03_13_pus_uva.fits ! AN table 1: 622 integrations on 190 of 190 possible baselines. ! AN table 2: 393 integrations on 190 of 190 possible baselines. ! AN table 3: 295 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.183704 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1800+7828 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2252 lines of history. ! ! Reading 182896 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1800+7828_S_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8756 telescope corrections were flagged in sub-array 1. ! A total of 4444 telescope corrections were flagged in sub-array 2. ! A total of 4090 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 8755 telescope corrections were flagged in sub-array 1. ! A total of 4444 telescope corrections were flagged in sub-array 2. ! A total of 4091 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 8756 telescope corrections were flagged in sub-array 1. ! A total of 4446 telescope corrections were flagged in sub-array 2. ! A total of 4091 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 8771 telescope corrections were flagged in sub-array 1. ! A total of 4444 telescope corrections were flagged in sub-array 2. ! A total of 4090 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.227532Jy sigma=0.009253 ! Fit after self-cal, rms=0.750812Jy sigma=0.005643 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.957 mas, bmaj=2.043 mas, bpa=-4.805 degrees ! Estimated noise=516.334 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.08896 Jy ! Component: 100 - total flux cleaned = 1.39707 Jy ! Total flux subtracted in 100 components = 1.39707 Jy ! Clean residual min=-0.025084 max=0.139560 Jy/beam ! Clean residual mean=0.000137 rms=0.006070 Jy/beam ! Combined flux in latest and established models = 1.39707 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.39707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.498816Jy sigma=0.003486 ! Fit after self-cal, rms=0.498106Jy sigma=0.003483 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15411 Jy ! Component: 100 - total flux cleaned = 0.232114 Jy ! Total flux subtracted in 100 components = 0.232114 Jy ! Clean residual min=-0.023481 max=0.049267 Jy/beam ! Clean residual mean=0.000104 rms=0.004547 Jy/beam ! Combined flux in latest and established models = 1.62919 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 7 components and 1.62919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.406152Jy sigma=0.002629 ! Fit after self-cal, rms=0.405190Jy sigma=0.002624 ! Inverting map ! Added new window around map position (-3, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0536139 Jy ! Component: 100 - total flux cleaned = 0.0879372 Jy ! Total flux subtracted in 100 components = 0.0879372 Jy ! Clean residual min=-0.023546 max=0.039346 Jy/beam ! Clean residual mean=0.000091 rms=0.004291 Jy/beam ! Combined flux in latest and established models = 1.71713 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 16 components and 1.71713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386401Jy sigma=0.002436 ! Fit after self-cal, rms=0.385488Jy sigma=0.002432 ! Inverting map ! Added new window around map position (3.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341708 Jy ! Component: 100 - total flux cleaned = 0.0565128 Jy ! Total flux subtracted in 100 components = 0.0565128 Jy ! Clean residual min=-0.024450 max=0.031058 Jy/beam ! Clean residual mean=0.000081 rms=0.004160 Jy/beam ! Combined flux in latest and established models = 1.77364 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 1.77364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378633Jy sigma=0.002360 ! Fit after self-cal, rms=0.378645Jy sigma=0.002360 ! Inverting map ! Added new window around map position (0, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263883 Jy ! Component: 100 - total flux cleaned = 0.0371939 Jy ! Total flux subtracted in 100 components = 0.0371939 Jy ! Clean residual min=-0.024527 max=0.029532 Jy/beam ! Clean residual mean=0.000077 rms=0.004091 Jy/beam ! Combined flux in latest and established models = 1.81083 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 1.81083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.373655Jy sigma=0.002314 ! Fit after self-cal, rms=0.373432Jy sigma=0.002313 ! Inverting map ! Added new window around map position (-3.5, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233836 Jy ! Component: 100 - total flux cleaned = 0.0333178 Jy ! Total flux subtracted in 100 components = 0.0333178 Jy ! Clean residual min=-0.023259 max=0.024374 Jy/beam ! Clean residual mean=0.000073 rms=0.004030 Jy/beam ! Combined flux in latest and established models = 1.84415 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 37 components and 1.84415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369001Jy sigma=0.002276 ! Fit after self-cal, rms=0.368801Jy sigma=0.002275 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=2.826 mas, bpa=-37 degrees ! Estimated noise=229.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419853 Jy ! Component: 100 - total flux cleaned = 0.057451 Jy ! Component: 150 - total flux cleaned = 0.0641351 Jy ! Component: 200 - total flux cleaned = 0.0676893 Jy ! Total flux subtracted in 200 components = 0.0676893 Jy ! Clean residual min=-0.019818 max=0.032050 Jy/beam ! Clean residual mean=0.000516 rms=0.006210 Jy/beam ! Combined flux in latest and established models = 1.91184 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 45 components and 1.91184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361748Jy sigma=0.002230 ! Fit after self-cal, rms=0.361230Jy sigma=0.002226 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.02 GC 1.05 KP 1.01 ! LA 0.99 NL 0.94 OV 1.03 PT 0.97 ! SC 1.05 WF 1.10 HH 1.00* KK 1.00* ! MA 1.00* MC 1.22 MK 0.95 NY 0.95 ! ON 0.89 TS 1.09 WZ 0.69 HN 0.97 ! ! A total of 90 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 GC 1.04 KP 1.07 ! LA 0.99 NL 1.00 OV 1.03 PT 1.00 ! SC 1.04 WF 0.98 HH 1.00* KK 1.00* ! MA 1.00* MC 1.01 MK 1.06 NY 1.01 ! ON 0.83 TS 1.09 WZ 0.89 HN 1.04 ! ! A total of 177 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 1.06 GC 1.08 KP 1.14 ! LA 1.00 NL 1.04 OV 0.99 PT 1.03 ! SC 1.08 WF 1.06 HH 1.00* KK 1.00* ! MA 1.00* MC 1.06 MK 1.03 NY 0.98 ! ON 0.83 TS 1.09 WZ 0.85 HN 1.08 ! ! ! Correcting IF 2. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.05 KP 0.98 ! LA 1.00 NL 0.95 OV 1.01 PT 0.97 ! SC 1.06 WF 1.03 HH 1.00* KK 1.00* ! MA 1.00* MC 1.14 MK 0.95 NY 1.00 ! ON 0.89 TS 1.08 WZ 0.91 HN 0.98 ! ! A total of 90 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.03 GC 1.04 KP 1.03 ! LA 1.01 NL 1.03 OV 1.01 PT 1.01 ! SC 1.06 WF 1.03 HH 1.00* KK 1.00* ! MA 1.00* MC 0.98 MK 1.07 NY 1.01 ! ON 0.83 TS 1.10 WZ 0.90 HN 1.04 ! ! A total of 177 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.03 GC 1.08 KP 1.07 ! LA 1.01 NL 1.05 OV 0.98 PT 1.03 ! SC 1.10 WF 1.02 HH 1.00* KK 1.00* ! MA 1.00* MC 1.12 MK 1.04 NY 1.02 ! ON 0.83 TS 1.10 WZ 0.85 HN 1.07 ! ! ! Correcting IF 3. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 GC 1.05 KP 1.04 ! LA 0.99 NL 0.91 OV 1.03 PT 0.95 ! SC 1.06 WF 0.69 HH 1.00* KK 1.00* ! MA 1.00* MC 0.77 MK 0.98 NY 1.03 ! ON 0.91 TS 1.09 WZ 0.89 HN 1.01 ! ! A total of 90 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.03 KP 1.07 ! LA 1.00 NL 0.98 OV 1.05 PT 0.95 ! SC 1.06 WF 0.88 HH 1.00* KK 1.00* ! MA 1.00* MC 0.66 MK 1.08 NY 1.02 ! ON 0.85 TS 1.10 WZ 0.87 HN 1.05 ! ! A total of 177 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 GC 1.08 KP 1.08 ! LA 1.00 NL 1.02 OV 1.01 PT 0.99 ! SC 1.09 WF 0.93 HH 1.00* KK 1.00* ! MA 1.00* MC 0.93 MK 1.04 NY 1.02 ! ON 0.85 TS 1.08 WZ 0.85 HN 1.11 ! ! ! Correcting IF 4. ! A total of 144 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.07 KP 1.01 ! LA 0.99 NL 0.91 OV 1.02 PT 0.97 ! SC 1.05 WF 1.04 HH 1.00* KK 1.00* ! MA 1.00* MC 0.98 MK 0.96 NY 0.99 ! ON 0.92 TS 1.19 WZ 0.83 HN 0.96 ! ! A total of 90 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.03 GC 1.05 KP 1.04 ! LA 1.00 NL 0.99 OV 1.02 PT 0.88 ! SC 1.06 WF 1.03 HH 1.00* KK 1.00* ! MA 1.00* MC 0.82 MK 1.08 NY 0.98 ! ON 0.85 TS 1.12 WZ 0.88 HN 1.05 ! ! A total of 177 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.04 GC 1.09 KP 1.06 ! LA 1.00 NL 1.02 OV 0.99 PT 1.02 ! SC 1.09 WF 1.03 HH 1.00* KK 1.00* ! MA 1.00* MC 1.06 MK 1.04 NY 0.99 ! ON 0.85 TS 1.09 WZ 0.84 HN 1.14 ! ! ! Fit before self-cal, rms=0.361230Jy sigma=0.002226 ! Fit after self-cal, rms=0.279730Jy sigma=0.001870 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.649 mas, bmaj=2.836 mas, bpa=-35.69 degrees ! Estimated noise=229.188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0263966 Jy ! Component: 100 - total flux cleaned = 0.0320937 Jy ! Component: 150 - total flux cleaned = 0.0355252 Jy ! Component: 200 - total flux cleaned = 0.0371679 Jy ! Total flux subtracted in 200 components = 0.0371679 Jy ! Clean residual min=-0.016713 max=0.027995 Jy/beam ! Clean residual mean=0.000260 rms=0.004963 Jy/beam ! Combined flux in latest and established models = 1.94901 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 1.94901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276893Jy sigma=0.001836 ! Fit after self-cal, rms=0.276577Jy sigma=0.001834 ! Inverting map ! Added new window around map position (-24.5, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0299795 Jy ! Component: 100 - total flux cleaned = 0.0485398 Jy ! Component: 150 - total flux cleaned = 0.0602132 Jy ! Component: 200 - total flux cleaned = 0.0658292 Jy ! Total flux subtracted in 200 components = 0.0658292 Jy ! Clean residual min=-0.015857 max=0.014546 Jy/beam ! Clean residual mean=0.000152 rms=0.004338 Jy/beam ! Combined flux in latest and established models = 2.01484 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 126 components and 2.01484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273716Jy sigma=0.001794 ! Fit after self-cal, rms=0.273267Jy sigma=0.001790 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273267Jy sigma=0.001790 ! Fit after self-cal, rms=0.241230Jy sigma=0.001482 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.656 mas, bmaj=2.836 mas, bpa=-37.15 degrees ! Estimated noise=229.259 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00738753 Jy ! Component: 100 - total flux cleaned = 0.0112013 Jy ! Component: 150 - total flux cleaned = 0.0143673 Jy ! Component: 200 - total flux cleaned = 0.0173907 Jy ! Total flux subtracted in 200 components = 0.0173907 Jy ! Clean residual min=-0.004821 max=0.011454 Jy/beam ! Clean residual mean=0.000112 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 2.03223 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 150 components and 2.03223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.240117Jy sigma=0.001469 ! Fit after self-cal, rms=0.239960Jy sigma=0.001468 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-31.5, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132361 Jy ! Component: 100 - total flux cleaned = 0.0205754 Jy ! Component: 150 - total flux cleaned = 0.0244615 Jy ! Component: 200 - total flux cleaned = 0.0271124 Jy ! Total flux subtracted in 200 components = 0.0271124 Jy ! Clean residual min=-0.004471 max=0.006974 Jy/beam ! Clean residual mean=0.000083 rms=0.001450 Jy/beam ! Combined flux in latest and established models = 2.05934 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 183 components and 2.05934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239125Jy sigma=0.001457 ! Fit after self-cal, rms=0.239036Jy sigma=0.001456 ! Inverting map ! Added new window around map position (-30, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603225 Jy ! Component: 100 - total flux cleaned = 0.00979295 Jy ! Component: 150 - total flux cleaned = 0.0122975 Jy ! Component: 200 - total flux cleaned = 0.0146115 Jy ! Total flux subtracted in 200 components = 0.0146115 Jy ! Clean residual min=-0.004024 max=0.006110 Jy/beam ! Clean residual mean=0.000066 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 2.07395 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 203 components and 2.07395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238624Jy sigma=0.001452 ! Fit after self-cal, rms=0.238561Jy sigma=0.001451 ! Inverting map ! Added new window around map position (-31, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048287 Jy ! Component: 100 - total flux cleaned = 0.00689706 Jy ! Component: 150 - total flux cleaned = 0.00897594 Jy ! Component: 200 - total flux cleaned = 0.0109209 Jy ! Total flux subtracted in 200 components = 0.0109209 Jy ! Clean residual min=-0.003891 max=0.005446 Jy/beam ! Clean residual mean=0.000052 rms=0.001230 Jy/beam ! Combined flux in latest and established models = 2.08487 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 226 components and 2.08487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238260Jy sigma=0.001448 ! Fit after self-cal, rms=0.238218Jy sigma=0.001448 ! Inverting map ! Added new window around map position (-14, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00320681 Jy ! Component: 100 - total flux cleaned = 0.00459864 Jy ! Component: 150 - total flux cleaned = 0.00622573 Jy ! Component: 200 - total flux cleaned = 0.00776041 Jy ! Total flux subtracted in 200 components = 0.00776041 Jy ! Clean residual min=-0.003776 max=0.005092 Jy/beam ! Clean residual mean=0.000039 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 2.09263 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 240 components and 2.09263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237988Jy sigma=0.001446 ! Fit after self-cal, rms=0.237956Jy sigma=0.001446 ! Inverting map ! Added new window around map position (-38.5, -12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429277 Jy ! Component: 100 - total flux cleaned = 0.00624035 Jy ! Component: 150 - total flux cleaned = 0.00784861 Jy ! Component: 200 - total flux cleaned = 0.00881689 Jy ! Total flux subtracted in 200 components = 0.00881689 Jy ! Clean residual min=-0.003805 max=0.004586 Jy/beam ! Clean residual mean=0.000032 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 2.10145 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 263 components and 2.10145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237761Jy sigma=0.001444 ! Fit after self-cal, rms=0.237736Jy sigma=0.001444 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237736Jy sigma=0.001444 ! Fit after self-cal, rms=0.235545Jy sigma=0.001427 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.654 mas, bmaj=2.835 mas, bpa=-37.93 degrees ! Estimated noise=229.101 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185016 Jy ! Component: 100 - total flux cleaned = -0.000149699 Jy ! Component: 150 - total flux cleaned = 0.00172595 Jy ! Component: 200 - total flux cleaned = 0.00309651 Jy ! Total flux subtracted in 200 components = 0.00309651 Jy ! Clean residual min=-0.002857 max=0.005141 Jy/beam ! Clean residual mean=0.000064 rms=0.001011 Jy/beam ! Combined flux in latest and established models = 2.10454 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 274 components and 2.10454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235219Jy sigma=0.001424 ! Fit after self-cal, rms=0.235189Jy sigma=0.001424 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265528 Jy ! Component: 100 - total flux cleaned = 0.00428671 Jy ! Component: 150 - total flux cleaned = 0.00580908 Jy ! Component: 200 - total flux cleaned = 0.00737555 Jy ! Total flux subtracted in 200 components = 0.00737555 Jy ! Clean residual min=-0.002713 max=0.004433 Jy/beam ! Clean residual mean=0.000053 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 2.11192 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 297 components and 2.11192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234989Jy sigma=0.001422 ! Fit after self-cal, rms=0.234963Jy sigma=0.001421 ! Inverting map ! Added new window around map position (-23, -14.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416124 Jy ! Component: 100 - total flux cleaned = 0.00573556 Jy ! Component: 150 - total flux cleaned = 0.00706326 Jy ! Component: 200 - total flux cleaned = 0.00819597 Jy ! Total flux subtracted in 200 components = 0.00819597 Jy ! Clean residual min=-0.002704 max=0.004455 Jy/beam ! Clean residual mean=0.000039 rms=0.000908 Jy/beam ! Combined flux in latest and established models = 2.12012 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 316 components and 2.12012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234803Jy sigma=0.001420 ! Fit after self-cal, rms=0.234784Jy sigma=0.001420 ! Inverting map ! Added new window around map position (-47, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442668 Jy ! Component: 100 - total flux cleaned = 0.00661135 Jy ! Component: 150 - total flux cleaned = 0.00822783 Jy ! Component: 200 - total flux cleaned = 0.00928206 Jy ! Total flux subtracted in 200 components = 0.00928206 Jy ! Clean residual min=-0.002512 max=0.003583 Jy/beam ! Clean residual mean=0.000028 rms=0.000833 Jy/beam ! Combined flux in latest and established models = 2.1294 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 340 components and 2.1294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234639Jy sigma=0.001418 ! Fit after self-cal, rms=0.234626Jy sigma=0.001418 ! Inverting map ! Added new window around map position (-30.5, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00281455 Jy ! Component: 100 - total flux cleaned = 0.0040033 Jy ! Component: 150 - total flux cleaned = 0.00511806 Jy ! Component: 200 - total flux cleaned = 0.00618216 Jy ! Total flux subtracted in 200 components = 0.00618216 Jy ! Clean residual min=-0.002628 max=0.003204 Jy/beam ! Clean residual mean=0.000023 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 2.13558 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 355 components and 2.13558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234524Jy sigma=0.001417 ! Fit after self-cal, rms=0.234515Jy sigma=0.001417 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234515Jy sigma=0.001417 ! Fit after self-cal, rms=0.234094Jy sigma=0.001416 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.113 mas, bmaj=9.05 mas, bpa=11.29 degrees ! Estimated noise=313.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00719215 Jy ! Component: 100 - total flux cleaned = 0.0126569 Jy ! Component: 150 - total flux cleaned = 0.0171048 Jy ! Component: 200 - total flux cleaned = 0.0204898 Jy ! Total flux subtracted in 200 components = 0.0204898 Jy ! Clean residual min=-0.002846 max=0.005536 Jy/beam ! Clean residual mean=0.000065 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 2.15607 Jy selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 421 components and 2.15607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234041Jy sigma=0.001415 ! Fit after self-cal, rms=0.234034Jy sigma=0.001415 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00348094 Jy ! Component: 100 - total flux cleaned = 0.00572216 Jy ! Component: 150 - total flux cleaned = 0.00773587 Jy ! Component: 200 - total flux cleaned = 0.00944915 Jy ! Total flux subtracted in 200 components = 0.00944915 Jy ! Clean residual min=-0.002835 max=0.005336 Jy/beam ! Clean residual mean=0.000034 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 2.16552 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 447 components and 2.16552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234020Jy sigma=0.001414 ! Fit after self-cal, rms=0.234011Jy sigma=0.001414 ! Inverting map ! Added new window around map position (-42.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00541893 Jy ! Component: 100 - total flux cleaned = 0.00881691 Jy ! Component: 150 - total flux cleaned = 0.0112311 Jy ! Component: 200 - total flux cleaned = 0.0129691 Jy ! Total flux subtracted in 200 components = 0.0129691 Jy ! Clean residual min=-0.002888 max=0.002594 Jy/beam ! Clean residual mean=-0.000009 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 2.17849 Jy ! Performing phase self-cal ! Adding 82 model components to the UV plane model. ! The established model now contains 521 components and 2.17849 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233967Jy sigma=0.001414 ! Fit after self-cal, rms=0.233960Jy sigma=0.001414 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=2.834 mas, bpa=-38.5 degrees ! Estimated noise=229.016 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.652 x 2.834 at -38.5 degrees (North through East) ! Clean map min=-0.0070808 max=1.5218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233960Jy sigma=0.001414 ! Fit after self-cal, rms=0.216074Jy sigma=0.001249 ! Inverting map and beam ! Estimated beam: bmin=2.652 mas, bmaj=2.833 mas, bpa=-38.4 degrees ! Estimated noise=228.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000138811 Jy ! Component: 100 - total flux cleaned = 1.42404e-06 Jy ! Component: 150 - total flux cleaned = 0.000132043 Jy ! Component: 200 - total flux cleaned = 1.40589e-05 Jy ! Total flux subtracted in 200 components = 1.40589e-05 Jy ! Clean residual min=-0.002333 max=0.002268 Jy/beam ! Clean residual mean=0.000016 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 2.1785 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 522 components and 2.1785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215898Jy sigma=0.001248 ! Fit after self-cal, rms=0.215883Jy sigma=0.001248 ! Inverting map ! Added new window around map position (5, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.50331e-06 Jy ! Component: 100 - total flux cleaned = 9.00665e-07 Jy ! Component: 150 - total flux cleaned = 0.000307289 Jy ! Component: 200 - total flux cleaned = 0.000595946 Jy ! Total flux subtracted in 200 components = 0.000595946 Jy ! Clean residual min=-0.002034 max=0.002140 Jy/beam ! Clean residual mean=0.000015 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 2.1791 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 534 components and 2.1791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215785Jy sigma=0.001247 ! Fit after self-cal, rms=0.215777Jy sigma=0.001247 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215777Jy sigma=0.001247 ! Fit after self-cal, rms=0.215650Jy sigma=0.001246 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.942 mas, bmaj=2.051 mas, bpa=-8.052 degrees ! Estimated noise=517.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.08924 Jy ! Component: 100 - total flux cleaned = 1.41272 Jy ! Component: 150 - total flux cleaned = 1.57297 Jy ! Component: 200 - total flux cleaned = 1.65618 Jy ! Total flux subtracted in 200 components = 1.65618 Jy ! Clean residual min=-0.005745 max=0.040779 Jy/beam ! Clean residual mean=0.000055 rms=0.002166 Jy/beam ! Combined flux in latest and established models = 1.65618 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.65618 Jy ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=2.832 mas, bpa=-38.78 degrees ! Estimated noise=228.802 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104937 Jy ! Component: 100 - total flux cleaned = 0.166299 Jy ! Component: 150 - total flux cleaned = 0.209564 Jy ! Component: 200 - total flux cleaned = 0.243085 Jy ! Total flux subtracted in 200 components = 0.243085 Jy ! Clean residual min=-0.005848 max=0.019958 Jy/beam ! Clean residual mean=0.000312 rms=0.003667 Jy/beam ! Combined flux in latest and established models = 1.89926 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 80 components and 1.89926 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270938 Jy ! Component: 100 - total flux cleaned = 0.0495583 Jy ! Component: 150 - total flux cleaned = 0.0686195 Jy ! Component: 200 - total flux cleaned = 0.0852574 Jy ! Total flux subtracted in 200 components = 0.0852574 Jy ! Clean residual min=-0.003837 max=0.010570 Jy/beam ! Clean residual mean=0.000217 rms=0.002434 Jy/beam ! Combined flux in latest and established models = 1.98452 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 167 components and 1.98452 Jy ! Inverting map ! Added new window around map position (-36, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147581 Jy ! Component: 100 - total flux cleaned = 0.0279773 Jy ! Component: 150 - total flux cleaned = 0.0398814 Jy ! Component: 200 - total flux cleaned = 0.0506555 Jy ! Total flux subtracted in 200 components = 0.0506555 Jy ! Clean residual min=-0.002915 max=0.006892 Jy/beam ! Clean residual mean=0.000163 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 2.03518 Jy ! Adding 116 model components to the UV plane model. ! The established model now contains 252 components and 2.03518 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.11 mas, bmaj=9.053 mas, bpa=10.99 degrees ! Estimated noise=313.652 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260551 Jy ! Component: 100 - total flux cleaned = 0.0459207 Jy ! Component: 150 - total flux cleaned = 0.0619514 Jy ! Component: 200 - total flux cleaned = 0.07521 Jy ! Total flux subtracted in 200 components = 0.07521 Jy ! Clean residual min=-0.004063 max=0.008160 Jy/beam ! Clean residual mean=0.000253 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 2.11039 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0111591 Jy ! Component: 100 - total flux cleaned = 0.0206191 Jy ! Component: 150 - total flux cleaned = 0.028692 Jy ! Component: 200 - total flux cleaned = 0.0356413 Jy ! Total flux subtracted in 200 components = 0.0356413 Jy ! Clean residual min=-0.003023 max=0.004511 Jy/beam ! Clean residual mean=0.000126 rms=0.001650 Jy/beam ! Combined flux in latest and established models = 2.14603 Jy ! Adding 275 model components to the UV plane model. ! The established model now contains 505 components and 2.14603 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.65 mas, bmaj=2.832 mas, bpa=-38.78 degrees ! Estimated noise=228.802 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248679 Jy ! Component: 100 - total flux cleaned = 0.00452041 Jy ! Component: 150 - total flux cleaned = 0.00651812 Jy ! Component: 200 - total flux cleaned = 0.00862967 Jy ! Total flux subtracted in 200 components = 0.00862967 Jy ! Clean residual min=-0.002034 max=0.002939 Jy/beam ! Clean residual mean=0.000041 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 2.15466 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 542 components and 2.15466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215461Jy sigma=0.001245 ! Fit after self-cal, rms=0.215312Jy sigma=0.001244 wmodel J1800+7828_S_2000_03_13_pus_map.mod ! Writing 542 model components to file: J1800+7828_S_2000_03_13_pus_map.mod wobs J1800+7828_S_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J1800+7828_S_2000_03_13_pus_uvs.fits wwins J1800+7828_S_2000_03_13_pus_map.win ! wwins: Wrote 19 windows to J1800+7828_S_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119684 Jy ! Component: 100 - total flux cleaned = 0.00223261 Jy ! Component: 150 - total flux cleaned = 0.00293197 Jy ! Component: 200 - total flux cleaned = 0.00368258 Jy ! Component: 250 - total flux cleaned = 0.0044115 Jy ! Component: 300 - total flux cleaned = 0.00512206 Jy ! Component: 350 - total flux cleaned = 0.00581673 Jy ! Component: 400 - total flux cleaned = 0.00646372 Jy ! Component: 450 - total flux cleaned = 0.00706577 Jy ! Component: 500 - total flux cleaned = 0.00769075 Jy ! Component: 550 - total flux cleaned = 0.00824078 Jy ! Component: 600 - total flux cleaned = 0.00878252 Jy ! Component: 650 - total flux cleaned = 0.00934796 Jy ! Component: 700 - total flux cleaned = 0.00984374 Jy ! Component: 750 - total flux cleaned = 0.0103027 Jy ! Component: 800 - total flux cleaned = 0.0107557 Jy ! Component: 850 - total flux cleaned = 0.0112034 Jy ! Component: 900 - total flux cleaned = 0.0116452 Jy ! Component: 950 - total flux cleaned = 0.0120532 Jy ! Component: 1000 - total flux cleaned = 0.012399 Jy ! Component: 1050 - total flux cleaned = 0.0128266 Jy ! Component: 1100 - total flux cleaned = 0.013137 Jy ! Component: 1150 - total flux cleaned = 0.0135555 Jy ! Component: 1200 - total flux cleaned = 0.0138316 Jy ! Component: 1250 - total flux cleaned = 0.0141598 Jy ! Component: 1300 - total flux cleaned = 0.0144848 Jy ! Component: 1350 - total flux cleaned = 0.0147798 Jy ! Component: 1400 - total flux cleaned = 0.0150193 Jy ! Component: 1450 - total flux cleaned = 0.0154139 Jy ! Component: 1500 - total flux cleaned = 0.0155703 Jy ! Component: 1550 - total flux cleaned = 0.0158547 Jy ! Component: 1600 - total flux cleaned = 0.0160849 Jy ! Component: 1650 - total flux cleaned = 0.0162628 Jy ! Component: 1700 - total flux cleaned = 0.0165144 Jy ! Component: 1750 - total flux cleaned = 0.0166144 Jy ! Component: 1800 - total flux cleaned = 0.0168372 Jy ! Component: 1850 - total flux cleaned = 0.0170335 Jy ! Component: 1900 - total flux cleaned = 0.0171312 Jy ! Component: 1950 - total flux cleaned = 0.017397 Jy ! Component: 2000 - total flux cleaned = 0.0174928 Jy ! Total flux subtracted in 2048 components = 0.0176595 Jy ! Clean residual min=-0.001192 max=0.001192 Jy/beam ! Clean residual mean=0.000021 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 2.17232 Jy keep ! Adding 176 model components to the UV plane model. ! The established model now contains 696 components and 2.17231 Jy ![Exited script file: muppet] wmap "J1800+7828_S_2000_03_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.65 x 2.832 at -38.78 degrees (North through East) ! Clean map min=-0.0019778 max=1.5247 Jy/beam ! Writing clean map to FITS file: J1800+7828_S_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.52467 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000441459 device "J1800+7828_S_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J1800+7828_S_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0868634 0.0868634 0.173727 0.347453 0.694907 1.38981 2.77963 5.55925 11.1185 22.237 44.474 88.9481 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.524 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.65 x 2.832 at -38.78 degrees (North through East) ! Clean map min=-0.0019778 max=1.5247 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1800+7828_S_2000_03_13_pus_uvs.log closed on Wed Apr 3 13:48:16 2013