! Started logfile: J1743-0350_X_2000_03_13_pus_uvs.log on Mon Apr 1 13:04:47 2013 obs J1743-0350_X_2000_03_13_pus_uva.fits ! Reading UV FITS file: J1743-0350_X_2000_03_13_pus_uva.fits ! AN table 1: 46 integrations on 190 of 190 possible baselines. ! AN table 2: 17 integrations on 190 of 190 possible baselines. ! AN table 3: 52 integrations on 190 of 190 possible baselines. ! AN table 4: 61 integrations on 190 of 190 possible baselines. ! AN table 5: 150 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.10691 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1743-0350 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2382 lines of history. ! ! Reading 26488 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1743-0350_X_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 772 telescope corrections were flagged in sub-array 1. ! A total of 185 telescope corrections were flagged in sub-array 2. ! A total of 588 telescope corrections were flagged in sub-array 3. ! A total of 762 telescope corrections were flagged in sub-array 4. ! A total of 2436 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 772 telescope corrections were flagged in sub-array 1. ! A total of 185 telescope corrections were flagged in sub-array 2. ! A total of 588 telescope corrections were flagged in sub-array 3. ! A total of 762 telescope corrections were flagged in sub-array 4. ! A total of 2436 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 820 telescope corrections were flagged in sub-array 1. ! A total of 185 telescope corrections were flagged in sub-array 2. ! A total of 588 telescope corrections were flagged in sub-array 3. ! A total of 762 telescope corrections were flagged in sub-array 4. ! A total of 2436 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 772 telescope corrections were flagged in sub-array 1. ! A total of 185 telescope corrections were flagged in sub-array 2. ! A total of 588 telescope corrections were flagged in sub-array 3. ! A total of 762 telescope corrections were flagged in sub-array 4. ! A total of 2436 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=2.527998Jy sigma=0.024585 ! Fit after self-cal, rms=1.964560Jy sigma=0.018979 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5229 mas, bmaj=1.48 mas, bpa=-3.647 degrees ! Estimated noise=840.019 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.94272 Jy ! Component: 100 - total flux cleaned = 2.6092 Jy ! Total flux subtracted in 100 components = 2.6092 Jy ! Clean residual min=-0.091828 max=0.324413 Jy/beam ! Clean residual mean=0.000344 rms=0.023737 Jy/beam ! Combined flux in latest and established models = 2.6092 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 2.6092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.874934Jy sigma=0.007575 ! Fit after self-cal, rms=0.874804Jy sigma=0.007574 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.382989 Jy ! Component: 100 - total flux cleaned = 0.615121 Jy ! Total flux subtracted in 100 components = 0.615121 Jy ! Clean residual min=-0.054191 max=0.120244 Jy/beam ! Clean residual mean=0.000336 rms=0.013298 Jy/beam ! Combined flux in latest and established models = 3.22432 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 3.22432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.651415Jy sigma=0.004450 ! Fit after self-cal, rms=0.651227Jy sigma=0.004448 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148384 Jy ! Component: 100 - total flux cleaned = 0.250136 Jy ! Total flux subtracted in 100 components = 0.250136 Jy ! Clean residual min=-0.042555 max=0.068415 Jy/beam ! Clean residual mean=0.000336 rms=0.010563 Jy/beam ! Combined flux in latest and established models = 3.47446 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 28 components and 3.47446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.611473Jy sigma=0.003586 ! Fit after self-cal, rms=0.611317Jy sigma=0.003584 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Added new window around map position (-1.4, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0787745 Jy ! Component: 100 - total flux cleaned = 0.136196 Jy ! Total flux subtracted in 100 components = 0.136196 Jy ! Clean residual min=-0.040951 max=0.049225 Jy/beam ! Clean residual mean=0.000341 rms=0.009585 Jy/beam ! Combined flux in latest and established models = 3.61065 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 3.61065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.601889Jy sigma=0.003294 ! Fit after self-cal, rms=0.601727Jy sigma=0.003291 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6389 mas, bmaj=1.715 mas, bpa=-4.183 degrees ! Estimated noise=511.469 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0721531 Jy ! Component: 100 - total flux cleaned = 0.114572 Jy ! Component: 150 - total flux cleaned = 0.142129 Jy ! Component: 200 - total flux cleaned = 0.156792 Jy ! Total flux subtracted in 200 components = 0.156792 Jy ! Clean residual min=-0.044824 max=0.040068 Jy/beam ! Clean residual mean=0.000100 rms=0.010260 Jy/beam ! Combined flux in latest and established models = 3.76745 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 37 components and 3.76745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.601261Jy sigma=0.003093 ! Fit after self-cal, rms=0.601168Jy sigma=0.003092 ! Inverting map ! Your choice of large map pixels excluded 1.14% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.01 MC 1.09 MK 1.00* NY 1.00* ! ON 1.01 TS 1.00* WZ 0.98 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.03 GC 1.00* KP 1.00* ! LA 1.10 NL 1.08 OV 1.00* PT 1.09 ! SC 0.96 WF 1.03 HH 4.23 KK 1.00* ! MA 1.01 MC 1.01 MK 1.00* NY 1.00* ! ON 1.03 TS 1.00* WZ 1.07 HN 1.24 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.97 GC 1.20 KP 1.02 ! LA 1.01 NL 0.99 OV 0.98 PT 1.03 ! SC 0.93 WF 1.05 HH 1.00* KK 1.07 ! MA 1.00* MC 1.17 MK 1.33 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.11 HN 1.27 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.95 FD 0.95 GC 1.01 KP 1.01 ! LA 1.02 NL 0.97 OV 0.96 PT 1.00* ! SC 1.03 WF 1.03 HH 1.00* KK 0.99 ! MA 1.00* MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.93 FD 0.95 GC 1.08 KP 0.97 ! LA 1.01 NL 1.06 OV 0.95 PT 0.99 ! SC 1.00* WF 1.13 HH 1.00* KK 0.98 ! MA 1.00* MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* TS 1.04 WZ 1.00* HN 1.00* ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.03 MC 1.10 MK 1.00* NY 1.00* ! ON 1.02 TS 1.00* WZ 0.98 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.03 GC 1.00* KP 1.00* ! LA 1.06 NL 1.11 OV 1.00* PT 1.05 ! SC 0.95 WF 1.03 HH 3.40 KK 1.00* ! MA 1.02 MC 1.02 MK 1.00* NY 1.00* ! ON 1.02 TS 1.00* WZ 1.06 HN 1.25 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.96 GC 1.18 KP 0.98 ! LA 0.97 NL 1.02 OV 0.96 PT 0.99 ! SC 0.92 WF 1.06 HH 1.00* KK 1.06 ! MA 1.00* MC 1.19 MK 1.39 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.11 HN 1.20 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.95 GC 1.00 KP 0.98 ! LA 0.98 NL 1.00 OV 0.95 PT 1.00* ! SC 1.02 WF 1.04 HH 1.00* KK 0.99 ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.94 GC 1.06 KP 0.94 ! LA 0.97 NL 1.08 OV 0.94 PT 0.96 ! SC 1.00* WF 1.13 HH 1.00* KK 0.99 ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.04 WZ 1.00* HN 1.00* ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.04 MC 1.10 MK 1.00* NY 1.00* ! ON 1.02 TS 1.00* WZ 1.01 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.07 GC 1.00* KP 1.00* ! LA 1.06 NL 1.06 OV 1.00* PT 1.08 ! SC 0.99 WF 1.05 HH 2.56 KK 1.00* ! MA 1.01 MC 1.00 MK 1.00* NY 1.00* ! ON 1.02 TS 1.00* WZ 1.08 HN 1.19 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.99 GC 1.20 KP 1.00 ! LA 0.97 NL 0.97 OV 0.98 PT 1.02 ! SC 0.95 WF 1.08 HH 1.00* KK 1.04 ! MA 1.00* MC 1.14 MK 1.35 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.15 HN 1.14 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.97 GC 1.02 KP 1.00 ! LA 0.97 NL 0.96 OV 0.98 PT 1.00* ! SC 1.07 WF 1.06 HH 1.00* KK 0.98 ! MA 1.00* MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.98 FD 0.98 GC 1.08 KP 0.96 ! LA 0.96 NL 1.01 OV 0.96 PT 0.99 ! SC 1.00* WF 1.15 HH 1.00* KK 0.98 ! MA 1.00* MC 1.00* MK 0.98 NY 1.00* ! ON 1.00* TS 1.07 WZ 1.00* HN 1.00* ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00 MC 1.12 MK 1.00* NY 1.00* ! ON 1.03 TS 1.00* WZ 1.03 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.04 GC 1.00* KP 1.00* ! LA 1.09 NL 1.08 OV 1.00* PT 1.09 ! SC 1.04 WF 1.07 HH 2.53 KK 1.00* ! MA 1.00 MC 1.00 MK 1.00* NY 1.00* ! ON 1.04 TS 1.00* WZ 1.13 HN 1.16 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.98 GC 1.20 KP 0.99 ! LA 0.98 NL 0.98 OV 0.98 PT 1.03 ! SC 1.00 WF 1.10 HH 1.00* KK 1.07 ! MA 1.00* MC 1.12 MK 1.36 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.16 HN 1.14 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.96 GC 1.02 KP 0.98 ! LA 0.99 NL 0.97 OV 0.97 PT 1.00* ! SC 1.12 WF 1.06 HH 1.00* KK 1.00 ! MA 1.00* MC 1.00* MK 0.99 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.97 GC 1.09 KP 0.94 ! LA 0.98 NL 1.03 OV 0.96 PT 1.00 ! SC 1.00* WF 1.15 HH 1.00* KK 1.00 ! MA 1.00* MC 1.00* MK 1.00 NY 1.00* ! ON 1.00* TS 1.06 WZ 1.00* HN 1.00* ! ! ! Fit before self-cal, rms=0.601168Jy sigma=0.003092 ! Fit after self-cal, rms=0.784664Jy sigma=0.002205 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6528 mas, bmaj=1.815 mas, bpa=-4.728 degrees ! Estimated noise=523.043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0298833 Jy ! Component: 100 - total flux cleaned = -0.0365661 Jy ! Component: 150 - total flux cleaned = -0.0411846 Jy ! Component: 200 - total flux cleaned = -0.0449665 Jy ! Total flux subtracted in 200 components = -0.0449665 Jy ! Clean residual min=-0.016747 max=0.013857 Jy/beam ! Clean residual mean=0.000165 rms=0.002656 Jy/beam ! Combined flux in latest and established models = 3.72248 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 50 components and 3.72248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.782584Jy sigma=0.002173 ! Fit after self-cal, rms=0.783201Jy sigma=0.002173 ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.783201Jy sigma=0.002173 ! Fit after self-cal, rms=0.781800Jy sigma=0.002158 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6547 mas, bmaj=1.815 mas, bpa=-4.703 degrees ! Estimated noise=523.384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0163529 Jy ! Component: 100 - total flux cleaned = -0.0211141 Jy ! Component: 150 - total flux cleaned = -0.0236187 Jy ! Component: 200 - total flux cleaned = -0.0255353 Jy ! Total flux subtracted in 200 components = -0.0255353 Jy ! Clean residual min=-0.015171 max=0.010917 Jy/beam ! Clean residual mean=0.000147 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 3.69694 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 55 components and 3.69694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780851Jy sigma=0.002148 ! Fit after self-cal, rms=0.780803Jy sigma=0.002147 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180608 Jy ! Component: 100 - total flux cleaned = -0.0031821 Jy ! Component: 150 - total flux cleaned = -0.00469541 Jy ! Component: 200 - total flux cleaned = -0.00540075 Jy ! Total flux subtracted in 200 components = -0.00540075 Jy ! Clean residual min=-0.014446 max=0.011065 Jy/beam ! Clean residual mean=0.000147 rms=0.002195 Jy/beam ! Combined flux in latest and established models = 3.69154 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 56 components and 3.69154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780310Jy sigma=0.002145 ! Fit after self-cal, rms=0.780278Jy sigma=0.002145 ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.780278Jy sigma=0.002145 ! Fit after self-cal, rms=0.778823Jy sigma=0.002140 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6561 mas, bmaj=1.816 mas, bpa=-4.713 degrees ! Estimated noise=524.098 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0092807 Jy ! Component: 100 - total flux cleaned = -0.0113491 Jy ! Component: 150 - total flux cleaned = -0.0123946 Jy ! Component: 200 - total flux cleaned = -0.0136205 Jy ! Total flux subtracted in 200 components = -0.0136205 Jy ! Clean residual min=-0.014576 max=0.009723 Jy/beam ! Clean residual mean=0.000142 rms=0.002024 Jy/beam ! Combined flux in latest and established models = 3.67792 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 59 components and 3.67792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.778269Jy sigma=0.002136 ! Fit after self-cal, rms=0.778240Jy sigma=0.002136 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00117594 Jy ! Component: 100 - total flux cleaned = -0.00205227 Jy ! Component: 150 - total flux cleaned = -0.00268085 Jy ! Component: 200 - total flux cleaned = -0.00328111 Jy ! Total flux subtracted in 200 components = -0.00328111 Jy ! Clean residual min=-0.014121 max=0.009733 Jy/beam ! Clean residual mean=0.000142 rms=0.002007 Jy/beam ! Combined flux in latest and established models = 3.67464 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 60 components and 3.67464 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.777879Jy sigma=0.002134 ! Fit after self-cal, rms=0.777856Jy sigma=0.002134 ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.777856Jy sigma=0.002134 ! Fit after self-cal, rms=0.775764Jy sigma=0.002133 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=2.145 mas, bmaj=3.156 mas, bpa=7.598 degrees ! Estimated noise=730.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00930307 Jy ! Component: 100 - total flux cleaned = -0.0134275 Jy ! Component: 150 - total flux cleaned = -0.0149296 Jy ! Component: 200 - total flux cleaned = -0.0151298 Jy ! Total flux subtracted in 200 components = -0.0151298 Jy ! Clean residual min=-0.008573 max=0.009268 Jy/beam ! Clean residual mean=0.000427 rms=0.002685 Jy/beam ! Combined flux in latest and established models = 3.65951 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 63 components and 3.65951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.775759Jy sigma=0.002133 ! Fit after self-cal, rms=0.775709Jy sigma=0.002132 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000513366 Jy ! Component: 100 - total flux cleaned = -0.000698448 Jy ! Component: 150 - total flux cleaned = -0.000916713 Jy ! Component: 200 - total flux cleaned = -0.00111138 Jy ! Total flux subtracted in 200 components = -0.00111138 Jy ! Clean residual min=-0.008426 max=0.009364 Jy/beam ! Clean residual mean=0.000428 rms=0.002701 Jy/beam ! Combined flux in latest and established models = 3.6584 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 63 components and 3.6584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.775754Jy sigma=0.002132 ! Fit after self-cal, rms=0.775738Jy sigma=0.002132 ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6569 mas, bmaj=1.816 mas, bpa=-4.727 degrees ! Estimated noise=524.571 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6569 x 1.816 at -4.727 degrees (North through East) ! Clean map min=-0.0071676 max=2.811 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.775738Jy sigma=0.002132 ! Fit after self-cal, rms=3.363400Jy sigma=0.001163 ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6572 mas, bmaj=1.819 mas, bpa=-4.743 degrees ! Estimated noise=524.055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000934074 Jy ! Component: 100 - total flux cleaned = -0.00169516 Jy ! Component: 150 - total flux cleaned = -0.00237471 Jy ! Component: 200 - total flux cleaned = -0.00321109 Jy ! Total flux subtracted in 200 components = -0.00321109 Jy ! Clean residual min=-0.012386 max=0.007123 Jy/beam ! Clean residual mean=0.000034 rms=0.001395 Jy/beam ! Combined flux in latest and established models = 3.65519 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 64 components and 3.65519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.363268Jy sigma=0.001157 ! Fit after self-cal, rms=3.363260Jy sigma=0.001157 ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.89103e-05 Jy ! Component: 100 - total flux cleaned = -0.000330892 Jy ! Component: 150 - total flux cleaned = -0.00052203 Jy ! Component: 200 - total flux cleaned = -0.000890174 Jy ! Total flux subtracted in 200 components = -0.000890174 Jy ! Clean residual min=-0.012520 max=0.007075 Jy/beam ! Clean residual mean=0.000035 rms=0.001362 Jy/beam ! Combined flux in latest and established models = 3.6543 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 3.6543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.363175Jy sigma=0.001155 ! Fit after self-cal, rms=3.363170Jy sigma=0.001155 ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.363170Jy sigma=0.001155 ! Fit after self-cal, rms=3.332441Jy sigma=0.001153 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.5333 mas, bmaj=1.651 mas, bpa=-4.547 degrees ! Estimated noise=894.322 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.0418 Jy ! Component: 100 - total flux cleaned = 2.68719 Jy ! Component: 150 - total flux cleaned = 3.03593 Jy ! Component: 200 - total flux cleaned = 3.24459 Jy ! Total flux subtracted in 200 components = 3.24459 Jy ! Clean residual min=-0.033896 max=0.109492 Jy/beam ! Clean residual mean=0.000045 rms=0.008748 Jy/beam ! Combined flux in latest and established models = 3.24459 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 3.24459 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6578 mas, bmaj=1.818 mas, bpa=-4.748 degrees ! Estimated noise=524.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.174975 Jy ! Component: 100 - total flux cleaned = 0.274199 Jy ! Component: 150 - total flux cleaned = 0.332906 Jy ! Component: 200 - total flux cleaned = 0.368789 Jy ! Total flux subtracted in 200 components = 0.368789 Jy ! Clean residual min=-0.011538 max=0.020901 Jy/beam ! Clean residual mean=0.000040 rms=0.002708 Jy/beam ! Combined flux in latest and established models = 3.61338 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 3.61338 Jy ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Added new window around map position (-0.6, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0211999 Jy ! Component: 100 - total flux cleaned = 0.0276254 Jy ! Component: 150 - total flux cleaned = 0.0295217 Jy ! Component: 200 - total flux cleaned = 0.0301 Jy ! Total flux subtracted in 200 components = 0.0301 Jy ! Clean residual min=-0.009691 max=0.011859 Jy/beam ! Clean residual mean=0.000036 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 3.64348 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 3.64348 Jy ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Added new window around map position (1.2, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192776 Jy ! Component: 100 - total flux cleaned = 0.00192316 Jy ! Component: 150 - total flux cleaned = 0.00238618 Jy ! Component: 200 - total flux cleaned = 0.00240142 Jy ! Total flux subtracted in 200 components = 0.00240142 Jy ! Clean residual min=-0.008623 max=0.007210 Jy/beam ! Clean residual mean=0.000036 rms=0.001675 Jy/beam ! Combined flux in latest and established models = 3.64588 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 54 components and 3.64588 Jy ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=2.144 mas, bmaj=3.157 mas, bpa=7.44 degrees ! Estimated noise=729.631 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00488119 Jy ! Component: 100 - total flux cleaned = 0.00449167 Jy ! Component: 150 - total flux cleaned = 0.0043217 Jy ! Component: 200 - total flux cleaned = 0.0042455 Jy ! Total flux subtracted in 200 components = 0.0042455 Jy ! Clean residual min=-0.003605 max=0.004841 Jy/beam ! Clean residual mean=0.000107 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 3.65013 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451953 Jy ! Component: 100 - total flux cleaned = 0.00502601 Jy ! Component: 150 - total flux cleaned = 0.00544761 Jy ! Component: 200 - total flux cleaned = 0.00567136 Jy ! Total flux subtracted in 200 components = 0.00567136 Jy ! Clean residual min=-0.003121 max=0.003382 Jy/beam ! Clean residual mean=0.000098 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 3.6558 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 3.6558 Jy ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! Estimated beam: bmin=0.6578 mas, bmaj=1.818 mas, bpa=-4.748 degrees ! Estimated noise=524.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00310163 Jy ! Component: 100 - total flux cleaned = -0.00271195 Jy ! Component: 150 - total flux cleaned = -0.00272128 Jy ! Component: 200 - total flux cleaned = -0.00237164 Jy ! Total flux subtracted in 200 components = -0.00237164 Jy ! Clean residual min=-0.007682 max=0.005839 Jy/beam ! Clean residual mean=0.000032 rms=0.001491 Jy/beam ! Combined flux in latest and established models = 3.65343 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 90 components and 3.65343 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.336110Jy sigma=0.001183 ! Fit after self-cal, rms=3.336040Jy sigma=0.001181 wmodel J1743-0350_X_2000_03_13_pus_map.mod ! Writing 90 model components to file: J1743-0350_X_2000_03_13_pus_map.mod wobs J1743-0350_X_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J1743-0350_X_2000_03_13_pus_uvs.fits wwins J1743-0350_X_2000_03_13_pus_map.win ! wwins: Wrote 5 windows to J1743-0350_X_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00267072 Jy ! Component: 100 - total flux cleaned = -0.0039709 Jy ! Component: 150 - total flux cleaned = -0.00454173 Jy ! Component: 200 - total flux cleaned = -0.00487883 Jy ! Component: 250 - total flux cleaned = -0.0054328 Jy ! Component: 300 - total flux cleaned = -0.00554155 Jy ! Component: 350 - total flux cleaned = -0.00564998 Jy ! Component: 400 - total flux cleaned = -0.00586203 Jy ! Component: 450 - total flux cleaned = -0.00586149 Jy ! Component: 500 - total flux cleaned = -0.00596456 Jy ! Component: 550 - total flux cleaned = -0.00596427 Jy ! Component: 600 - total flux cleaned = -0.00596398 Jy ! Component: 650 - total flux cleaned = -0.00596235 Jy ! Component: 700 - total flux cleaned = -0.00575981 Jy ! Component: 750 - total flux cleaned = -0.00566088 Jy ! Component: 800 - total flux cleaned = -0.00556143 Jy ! Component: 850 - total flux cleaned = -0.00546347 Jy ! Component: 900 - total flux cleaned = -0.00546244 Jy ! Component: 950 - total flux cleaned = -0.00536643 Jy ! Component: 1000 - total flux cleaned = -0.0054612 Jy ! Component: 1050 - total flux cleaned = -0.0052705 Jy ! Component: 1100 - total flux cleaned = -0.00527081 Jy ! Component: 1150 - total flux cleaned = -0.00517676 Jy ! Component: 1200 - total flux cleaned = -0.00526955 Jy ! Component: 1250 - total flux cleaned = -0.00517661 Jy ! Component: 1300 - total flux cleaned = -0.00517584 Jy ! Component: 1350 - total flux cleaned = -0.00517559 Jy ! Component: 1400 - total flux cleaned = -0.00508439 Jy ! Component: 1450 - total flux cleaned = -0.00499464 Jy ! Component: 1500 - total flux cleaned = -0.00517347 Jy ! Component: 1550 - total flux cleaned = -0.00499558 Jy ! Component: 1600 - total flux cleaned = -0.00508435 Jy ! Component: 1650 - total flux cleaned = -0.00499674 Jy ! Component: 1700 - total flux cleaned = -0.0050844 Jy ! Component: 1750 - total flux cleaned = -0.00525847 Jy ! Component: 1800 - total flux cleaned = -0.00517133 Jy ! Component: 1850 - total flux cleaned = -0.00525688 Jy ! Component: 1900 - total flux cleaned = -0.00525675 Jy ! Component: 1950 - total flux cleaned = -0.00525656 Jy ! Component: 2000 - total flux cleaned = -0.00534242 Jy ! Total flux subtracted in 2048 components = -0.00534198 Jy ! Clean residual min=-0.004538 max=0.004247 Jy/beam ! Clean residual mean=0.000036 rms=0.001248 Jy/beam ! Combined flux in latest and established models = 3.64809 Jy keep ! Adding 73 model components to the UV plane model. ! The established model now contains 145 components and 3.64809 Jy ![Exited script file: muppet] wmap "J1743-0350_X_2000_03_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6578 x 1.818 at -4.748 degrees (North through East) ! Clean map min=-0.0051275 max=2.8154 Jy/beam ! Writing clean map to FITS file: J1743-0350_X_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.81544 invert ! Inverting map ! Your choice of large map pixels excluded 1.15% of the data. ! The x-axis pixel size should ideally be below 0.1695 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00124819 device "J1743-0350_X_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J1743-0350_X_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.133001 0.133001 0.266002 0.532004 1.06401 2.12802 4.25603 8.51206 17.0241 34.0483 68.0965 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0037 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.815 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6578 x 1.818 at -4.748 degrees (North through East) ! Clean map min=-0.0051275 max=2.8154 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1743-0350_X_2000_03_13_pus_uvs.log closed on Mon Apr 1 13:04:59 2013