! Started logfile: J1357+7643_X_2000_03_13_pus_uvs.log on Mon Apr 1 13:35:39 2013 obs J1357+7643_X_2000_03_13_pus_uva.fits ! Reading UV FITS file: J1357+7643_X_2000_03_13_pus_uva.fits ! AN table 1: 401 integrations on 190 of 190 possible baselines. ! AN table 2: 247 integrations on 190 of 190 possible baselines. ! AN table 3: 203 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.180667 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1357+7643 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2382 lines of history. ! ! Reading 116848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J1357+7643_X_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5860 telescope corrections were flagged in sub-array 1. ! A total of 2965 telescope corrections were flagged in sub-array 2. ! A total of 2860 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5860 telescope corrections were flagged in sub-array 1. ! A total of 2965 telescope corrections were flagged in sub-array 2. ! A total of 2860 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5860 telescope corrections were flagged in sub-array 1. ! A total of 2965 telescope corrections were flagged in sub-array 2. ! A total of 2860 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5860 telescope corrections were flagged in sub-array 1. ! A total of 2965 telescope corrections were flagged in sub-array 2. ! A total of 2860 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.630441Jy sigma=0.004576 ! Fit after self-cal, rms=0.443481Jy sigma=0.002303 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.5264 mas, bmaj=0.5546 mas, bpa=-72.69 degrees ! Estimated noise=536.466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.596988 Jy ! Component: 100 - total flux cleaned = 0.727359 Jy ! Total flux subtracted in 100 components = 0.727359 Jy ! Clean residual min=-0.007322 max=0.039337 Jy/beam ! Clean residual mean=-0.000026 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.727359 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.727359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395883Jy sigma=0.001688 ! Fit after self-cal, rms=0.395858Jy sigma=0.001688 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430737 Jy ! Component: 100 - total flux cleaned = 0.0675886 Jy ! Total flux subtracted in 100 components = 0.0675886 Jy ! Clean residual min=-0.007097 max=0.013423 Jy/beam ! Clean residual mean=-0.000018 rms=0.001492 Jy/beam ! Combined flux in latest and established models = 0.794947 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 12 components and 0.794947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387628Jy sigma=0.001474 ! Fit after self-cal, rms=0.387539Jy sigma=0.001474 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173714 Jy ! Component: 100 - total flux cleaned = 0.0300274 Jy ! Total flux subtracted in 100 components = 0.0300274 Jy ! Clean residual min=-0.006759 max=0.011424 Jy/beam ! Clean residual mean=-0.000014 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.824975 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.824975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385619Jy sigma=0.001413 ! Fit after self-cal, rms=0.385582Jy sigma=0.001413 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Added new window around map position (0.6, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0113076 Jy ! Component: 100 - total flux cleaned = 0.0196062 Jy ! Total flux subtracted in 100 components = 0.0196062 Jy ! Clean residual min=-0.007255 max=0.010425 Jy/beam ! Clean residual mean=-0.000011 rms=0.001353 Jy/beam ! Combined flux in latest and established models = 0.844581 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.844581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384831Jy sigma=0.001386 ! Fit after self-cal, rms=0.384805Jy sigma=0.001386 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Added new window around map position (-0.6, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00886065 Jy ! Component: 100 - total flux cleaned = 0.0147076 Jy ! Total flux subtracted in 100 components = 0.0147076 Jy ! Clean residual min=-0.007239 max=0.008543 Jy/beam ! Clean residual mean=-0.000010 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.859288 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 31 components and 0.859288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384396Jy sigma=0.001371 ! Fit after self-cal, rms=0.384371Jy sigma=0.001371 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Added new window around map position (-0.8, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00717384 Jy ! Component: 100 - total flux cleaned = 0.0113877 Jy ! Total flux subtracted in 100 components = 0.0113877 Jy ! Clean residual min=-0.007307 max=0.007736 Jy/beam ! Clean residual mean=-0.000008 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.870676 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 0.870676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.384120Jy sigma=0.001361 ! Fit after self-cal, rms=0.384106Jy sigma=0.001361 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6511 mas, bmaj=0.7138 mas, bpa=-72.35 degrees ! Estimated noise=260.264 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177144 Jy ! Component: 100 - total flux cleaned = 0.0278859 Jy ! Component: 150 - total flux cleaned = 0.0343529 Jy ! Component: 200 - total flux cleaned = 0.0378781 Jy ! Total flux subtracted in 200 components = 0.0378781 Jy ! Clean residual min=-0.008405 max=0.007939 Jy/beam ! Clean residual mean=-0.000033 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.908554 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.908554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383673Jy sigma=0.001339 ! Fit after self-cal, rms=0.383646Jy sigma=0.001339 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.98 GC 0.98 KP 1.03 ! LA 0.99 NL 0.99 OV 0.95 PT 0.99 ! SC 1.10 WF 1.02 HH 1.00* KK 1.04 ! MA 1.01 MC 0.96 MK 0.95 NY 0.92 ! ON 0.97 TS 0.96 WZ 0.99 HN 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.97 GC 1.06 KP 1.02 ! LA 1.02 NL 0.98 OV 0.97 PT 1.03 ! SC 1.03 WF 1.05 HH 1.00* KK 1.05 ! MA 1.04 MC 1.02 MK 0.96 NY 0.98 ! ON 0.97 TS 1.02 WZ 1.03 HN 1.15 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 0.98 GC 1.07 KP 1.03 ! LA 1.06 NL 0.99 OV 0.99 PT 1.03 ! SC 1.16 WF 1.03 HH 1.00* KK 1.07 ! MA 1.01 MC 0.96 MK 1.01 NY 0.94 ! ON 0.97 TS 0.93 WZ 0.96 HN 1.00* ! ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 GC 0.91 KP 1.00 ! LA 0.96 NL 1.02 OV 0.94 PT 0.96 ! SC 1.09 WF 1.03 HH 1.00* KK 1.03 ! MA 1.00 MC 0.97 MK 0.99 NY 0.95 ! ON 0.97 TS 0.98 WZ 0.99 HN 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.97 GC 1.06 KP 0.99 ! LA 0.98 NL 1.01 OV 0.95 PT 0.99 ! SC 1.02 WF 1.05 HH 1.00* KK 1.03 ! MA 1.05 MC 1.04 MK 1.00 NY 1.01 ! ON 0.96 TS 1.02 WZ 1.03 HN 1.18 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.98 GC 1.05 KP 1.01 ! LA 1.02 NL 1.02 OV 0.97 PT 0.99 ! SC 1.12 WF 1.03 HH 1.00* KK 1.07 ! MA 1.00 MC 0.97 MK 1.07 NY 0.98 ! ON 0.97 TS 0.95 WZ 0.97 HN 1.00* ! ! ! Correcting IF 3. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 GC 0.96 KP 1.01 ! LA 0.95 NL 0.97 OV 0.96 PT 1.00 ! SC 1.15 WF 1.03 HH 1.00* KK 1.01 ! MA 1.00 MC 0.96 MK 0.96 NY 1.00 ! ON 0.96 TS 1.01 WZ 1.02 HN 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 GC 1.06 KP 1.01 ! LA 0.97 NL 0.97 OV 0.96 PT 1.02 ! SC 1.05 WF 1.06 HH 1.00* KK 1.02 ! MA 1.01 MC 1.03 MK 0.96 NY 1.08 ! ON 0.98 TS 1.06 WZ 1.05 HN 1.17 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00 GC 1.06 KP 1.02 ! LA 1.02 NL 0.97 OV 0.99 PT 1.01 ! SC 1.17 WF 1.02 HH 1.00* KK 1.06 ! MA 1.01 MC 0.96 MK 1.02 NY 1.02 ! ON 0.97 TS 0.99 WZ 1.00 HN 1.00* ! ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 GC 0.96 KP 1.00 ! LA 0.96 NL 0.99 OV 0.96 PT 1.00 ! SC 1.20 WF 1.05 HH 1.00* KK 1.03 ! MA 1.00 MC 0.96 MK 0.98 NY 0.99 ! ON 0.99 TS 1.02 WZ 1.04 HN 1.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 GC 1.07 KP 0.99 ! LA 0.99 NL 0.98 OV 0.97 PT 1.04 ! SC 1.12 WF 1.08 HH 1.00* KK 1.04 ! MA 0.99 MC 1.00 MK 0.99 NY 1.01 ! ON 0.99 TS 1.06 WZ 1.06 HN 1.10 ! ! A total of 36 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 1.00 GC 1.05 KP 1.00 ! LA 1.03 NL 0.99 OV 0.99 PT 1.02 ! SC 1.27 WF 1.05 HH 1.00* KK 1.07 ! MA 0.97 MC 0.98 MK 1.05 NY 1.01 ! ON 0.98 TS 0.99 WZ 1.01 HN 1.00* ! ! ! Fit before self-cal, rms=0.383646Jy sigma=0.001339 ! Fit after self-cal, rms=0.432755Jy sigma=0.001280 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6528 mas, bmaj=0.7202 mas, bpa=-71.31 degrees ! Estimated noise=260.742 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00718796 Jy ! Component: 100 - total flux cleaned = -0.00911714 Jy ! Component: 150 - total flux cleaned = -0.0106545 Jy ! Component: 200 - total flux cleaned = -0.0113039 Jy ! Total flux subtracted in 200 components = -0.0113039 Jy ! Clean residual min=-0.003288 max=0.002870 Jy/beam ! Clean residual mean=-0.000016 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.89725 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.89725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.432570Jy sigma=0.001277 ! Fit after self-cal, rms=0.432682Jy sigma=0.001277 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.432682Jy sigma=0.001277 ! Fit after self-cal, rms=0.434721Jy sigma=0.001263 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6545 mas, bmaj=0.7203 mas, bpa=-71.43 degrees ! Estimated noise=260.649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00403333 Jy ! Component: 100 - total flux cleaned = -0.0052979 Jy ! Component: 150 - total flux cleaned = -0.00631997 Jy ! Component: 200 - total flux cleaned = -0.00716556 Jy ! Total flux subtracted in 200 components = -0.00716556 Jy ! Clean residual min=-0.002017 max=0.001840 Jy/beam ! Clean residual mean=-0.000017 rms=0.000466 Jy/beam ! Combined flux in latest and established models = 0.890085 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 69 components and 0.890085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434637Jy sigma=0.001261 ! Fit after self-cal, rms=0.434657Jy sigma=0.001261 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000819643 Jy ! Component: 100 - total flux cleaned = -0.00140117 Jy ! Component: 150 - total flux cleaned = -0.00188005 Jy ! Component: 200 - total flux cleaned = -0.00227931 Jy ! Total flux subtracted in 200 components = -0.00227931 Jy ! Clean residual min=-0.001943 max=0.001874 Jy/beam ! Clean residual mean=-0.000020 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.887806 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 71 components and 0.887806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434639Jy sigma=0.001261 ! Fit after self-cal, rms=0.434641Jy sigma=0.001261 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.434641Jy sigma=0.001261 ! Fit after self-cal, rms=0.437193Jy sigma=0.001260 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6551 mas, bmaj=0.7215 mas, bpa=-71.13 degrees ! Estimated noise=260.921 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231621 Jy ! Component: 100 - total flux cleaned = -0.00308908 Jy ! Component: 150 - total flux cleaned = -0.00371713 Jy ! Component: 200 - total flux cleaned = -0.00429194 Jy ! Total flux subtracted in 200 components = -0.00429194 Jy ! Clean residual min=-0.001897 max=0.001810 Jy/beam ! Clean residual mean=-0.000014 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 0.883514 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.883514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.437154Jy sigma=0.001259 ! Fit after self-cal, rms=0.437169Jy sigma=0.001259 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000488949 Jy ! Component: 100 - total flux cleaned = -0.000851094 Jy ! Component: 150 - total flux cleaned = -0.00115756 Jy ! Component: 200 - total flux cleaned = -0.00141936 Jy ! Total flux subtracted in 200 components = -0.00141936 Jy ! Clean residual min=-0.001867 max=0.001830 Jy/beam ! Clean residual mean=-0.000016 rms=0.000429 Jy/beam ! Combined flux in latest and established models = 0.882094 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 74 components and 0.882094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.437160Jy sigma=0.001259 ! Fit after self-cal, rms=0.437162Jy sigma=0.001259 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.437162Jy sigma=0.001259 ! Fit after self-cal, rms=0.439217Jy sigma=0.001259 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=2.558 mas, bmaj=2.706 mas, bpa=-52.81 degrees ! Estimated noise=375.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00245914 Jy ! Component: 100 - total flux cleaned = -0.00307337 Jy ! Component: 150 - total flux cleaned = -0.00310049 Jy ! Component: 200 - total flux cleaned = -0.00310202 Jy ! Total flux subtracted in 200 components = -0.00310202 Jy ! Clean residual min=-0.002427 max=0.002833 Jy/beam ! Clean residual mean=-0.000043 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.878992 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.878992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439213Jy sigma=0.001259 ! Fit after self-cal, rms=0.439223Jy sigma=0.001259 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.11327e-05 Jy ! Component: 100 - total flux cleaned = 1.11418e-06 Jy ! Component: 150 - total flux cleaned = -1.92383e-07 Jy ! Component: 200 - total flux cleaned = 4.55244e-07 Jy ! Total flux subtracted in 200 components = 4.55244e-07 Jy ! Clean residual min=-0.002359 max=0.002741 Jy/beam ! Clean residual mean=-0.000043 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.878993 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 83 components and 0.878993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439225Jy sigma=0.001259 ! Fit after self-cal, rms=0.439225Jy sigma=0.001259 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6555 mas, bmaj=0.7224 mas, bpa=-70.91 degrees ! Estimated noise=261.173 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6555 x 0.7224 at -70.91 degrees (North through East) ! Clean map min=-0.0015747 max=0.79733 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.439225Jy sigma=0.001259 ! Fit after self-cal, rms=0.554161Jy sigma=0.001180 ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6556 mas, bmaj=0.7225 mas, bpa=-70.83 degrees ! Estimated noise=260.657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0018638 Jy ! Component: 100 - total flux cleaned = -0.00240799 Jy ! Component: 150 - total flux cleaned = -0.00276275 Jy ! Component: 200 - total flux cleaned = -0.0030249 Jy ! Total flux subtracted in 200 components = -0.0030249 Jy ! Clean residual min=-0.001451 max=0.001677 Jy/beam ! Clean residual mean=-0.000004 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.875968 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 86 components and 0.875968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554154Jy sigma=0.001179 ! Fit after self-cal, rms=0.554156Jy sigma=0.001179 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Added new window around map position (-3.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158597 Jy ! Component: 100 - total flux cleaned = 0.00177715 Jy ! Component: 150 - total flux cleaned = 0.00190033 Jy ! Component: 200 - total flux cleaned = 0.00198394 Jy ! Total flux subtracted in 200 components = 0.00198394 Jy ! Clean residual min=-0.001449 max=0.001327 Jy/beam ! Clean residual mean=-0.000002 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.877952 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 97 components and 0.877952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554154Jy sigma=0.001179 ! Fit after self-cal, rms=0.554150Jy sigma=0.001179 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.554150Jy sigma=0.001179 ! Fit after self-cal, rms=0.555525Jy sigma=0.001179 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.5263 mas, bmaj=0.5549 mas, bpa=-71.69 degrees ! Estimated noise=545.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.605597 Jy ! Component: 100 - total flux cleaned = 0.738013 Jy ! Component: 150 - total flux cleaned = 0.780756 Jy ! Component: 200 - total flux cleaned = 0.804701 Jy ! Total flux subtracted in 200 components = 0.804701 Jy ! Clean residual min=-0.003919 max=0.012915 Jy/beam ! Clean residual mean=-0.000009 rms=0.000924 Jy/beam ! Combined flux in latest and established models = 0.804702 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.804702 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6559 mas, bmaj=0.7231 mas, bpa=-70.72 degrees ! Estimated noise=260.651 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.030862 Jy ! Component: 100 - total flux cleaned = 0.0463898 Jy ! Component: 150 - total flux cleaned = 0.0548693 Jy ! Component: 200 - total flux cleaned = 0.0599078 Jy ! Total flux subtracted in 200 components = 0.0599078 Jy ! Clean residual min=-0.001557 max=0.003198 Jy/beam ! Clean residual mean=-0.000015 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.86461 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.86461 Jy ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Added new window around map position (-1.4, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343728 Jy ! Component: 100 - total flux cleaned = 0.00584276 Jy ! Component: 150 - total flux cleaned = 0.00767484 Jy ! Component: 200 - total flux cleaned = 0.00911134 Jy ! Total flux subtracted in 200 components = 0.00911134 Jy ! Clean residual min=-0.001402 max=0.001339 Jy/beam ! Clean residual mean=-0.000004 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.873721 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 60 components and 0.873721 Jy ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=2.559 mas, bmaj=2.708 mas, bpa=-52.6 degrees ! Estimated noise=373.362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023514 Jy ! Component: 100 - total flux cleaned = 0.00341639 Jy ! Component: 150 - total flux cleaned = 0.00398163 Jy ! Component: 200 - total flux cleaned = 0.00430952 Jy ! Total flux subtracted in 200 components = 0.00430952 Jy ! Clean residual min=-0.001740 max=0.001590 Jy/beam ! Clean residual mean=0.000003 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.87803 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.30387e-05 Jy ! Component: 100 - total flux cleaned = 0.000118239 Jy ! Component: 150 - total flux cleaned = 0.000150958 Jy ! Component: 200 - total flux cleaned = 0.00017387 Jy ! Total flux subtracted in 200 components = 0.00017387 Jy ! Clean residual min=-0.001731 max=0.001598 Jy/beam ! Clean residual mean=0.000004 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 0.878204 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 90 components and 0.878204 Jy ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! Estimated beam: bmin=0.6559 mas, bmaj=0.7231 mas, bpa=-70.72 degrees ! Estimated noise=260.651 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.14281e-05 Jy ! Component: 100 - total flux cleaned = -7.90275e-05 Jy ! Component: 150 - total flux cleaned = -5.77955e-05 Jy ! Component: 200 - total flux cleaned = -9.85076e-05 Jy ! Total flux subtracted in 200 components = -9.85076e-05 Jy ! Clean residual min=-0.001342 max=0.001305 Jy/beam ! Clean residual mean=0.000001 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.878106 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 102 components and 0.878106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.555519Jy sigma=0.001179 ! Fit after self-cal, rms=0.555524Jy sigma=0.001179 wmodel J1357+7643_X_2000_03_13_pus_map.mod ! Writing 102 model components to file: J1357+7643_X_2000_03_13_pus_map.mod wobs J1357+7643_X_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J1357+7643_X_2000_03_13_pus_uvs.fits wwins J1357+7643_X_2000_03_13_pus_map.win ! wwins: Wrote 7 windows to J1357+7643_X_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.7003e-05 Jy ! Component: 100 - total flux cleaned = -6.67938e-06 Jy ! Component: 150 - total flux cleaned = -6.33607e-06 Jy ! Component: 200 - total flux cleaned = -7.23834e-05 Jy ! Component: 250 - total flux cleaned = -0.000201702 Jy ! Component: 300 - total flux cleaned = -0.000265086 Jy ! Component: 350 - total flux cleaned = -0.000369478 Jy ! Component: 400 - total flux cleaned = -0.000493001 Jy ! Component: 450 - total flux cleaned = -0.000553919 Jy ! Component: 500 - total flux cleaned = -0.000634562 Jy ! Component: 550 - total flux cleaned = -0.000714241 Jy ! Component: 600 - total flux cleaned = -0.00077343 Jy ! Component: 650 - total flux cleaned = -0.000812453 Jy ! Component: 700 - total flux cleaned = -0.000870434 Jy ! Component: 750 - total flux cleaned = -0.000870527 Jy ! Component: 800 - total flux cleaned = -0.00090871 Jy ! Component: 850 - total flux cleaned = -0.00088996 Jy ! Component: 900 - total flux cleaned = -0.000964794 Jy ! Component: 950 - total flux cleaned = -0.000927664 Jy ! Component: 1000 - total flux cleaned = -0.00090921 Jy ! Component: 1050 - total flux cleaned = -0.000872584 Jy ! Component: 1100 - total flux cleaned = -0.000872458 Jy ! Component: 1150 - total flux cleaned = -0.000836341 Jy ! Component: 1200 - total flux cleaned = -0.000818647 Jy ! Component: 1250 - total flux cleaned = -0.000800856 Jy ! Component: 1300 - total flux cleaned = -0.000783206 Jy ! Component: 1350 - total flux cleaned = -0.000765513 Jy ! Component: 1400 - total flux cleaned = -0.000730445 Jy ! Component: 1450 - total flux cleaned = -0.000730583 Jy ! Component: 1500 - total flux cleaned = -0.000713239 Jy ! Component: 1550 - total flux cleaned = -0.000696121 Jy ! Component: 1600 - total flux cleaned = -0.000764794 Jy ! Component: 1650 - total flux cleaned = -0.000730473 Jy ! Component: 1700 - total flux cleaned = -0.000679536 Jy ! Component: 1750 - total flux cleaned = -0.000730317 Jy ! Component: 1800 - total flux cleaned = -0.000696621 Jy ! Component: 1850 - total flux cleaned = -0.000746924 Jy ! Component: 1900 - total flux cleaned = -0.000613169 Jy ! Component: 1950 - total flux cleaned = -0.000713012 Jy ! Component: 2000 - total flux cleaned = -0.000646717 Jy ! Total flux subtracted in 2048 components = -0.000696358 Jy ! Clean residual min=-0.000995 max=0.001080 Jy/beam ! Clean residual mean=0.000001 rms=0.000293 Jy/beam ! Combined flux in latest and established models = 0.877409 Jy keep ! Adding 186 model components to the UV plane model. ! The established model now contains 288 components and 0.877409 Jy ![Exited script file: muppet] wmap "J1357+7643_X_2000_03_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6559 x 0.7231 at -70.72 degrees (North through East) ! Clean map min=-0.0011268 max=0.79859 Jy/beam ! Writing clean map to FITS file: J1357+7643_X_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.79859 invert ! Inverting map ! Your choice of large map pixels excluded 4.32% of the data. ! The x-axis pixel size should ideally be below 0.1558 milli-arcsec ! The y-axis pixel size should ideally be below 0.1613 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000293071 device "J1357+7643_X_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J1357+7643_X_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.110096 0.110096 0.220191 0.440382 0.880764 1.76153 3.52306 7.04611 14.0922 28.1845 56.3689 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.798 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6559 x 0.7231 at -70.72 degrees (North through East) ! Clean map min=-0.0011268 max=0.79859 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1357+7643_X_2000_03_13_pus_uvs.log closed on Mon Apr 1 13:36:12 2013