! Started logfile: J1230+1223_S_2000_03_13_pus_uvs.log on Tue Apr 2 23:57:09 2013 obs J1230+1223_S_2000_03_13_pus_uva.fits ! Reading UV FITS file: J1230+1223_S_2000_03_13_pus_uva.fits ! AN table 1: 62 integrations on 190 of 190 possible baselines. ! AN table 2: 7 integrations on 190 of 190 possible baselines. ! AN table 3: 22 integrations on 190 of 190 possible baselines. ! AN table 4: 21 integrations on 190 of 190 possible baselines. ! AN table 5: 249 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.132031 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1230+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2251 lines of history. ! ! Reading 36224 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1230+1223_S_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1071 telescope corrections were flagged in sub-array 1. ! A total of 131 telescope corrections were flagged in sub-array 2. ! A total of 276 telescope corrections were flagged in sub-array 3. ! A total of 370 telescope corrections were flagged in sub-array 4. ! A total of 3424 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 1071 telescope corrections were flagged in sub-array 1. ! A total of 131 telescope corrections were flagged in sub-array 2. ! A total of 276 telescope corrections were flagged in sub-array 3. ! A total of 370 telescope corrections were flagged in sub-array 4. ! A total of 3424 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 1071 telescope corrections were flagged in sub-array 1. ! A total of 131 telescope corrections were flagged in sub-array 2. ! A total of 299 telescope corrections were flagged in sub-array 3. ! A total of 370 telescope corrections were flagged in sub-array 4. ! A total of 3430 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 1071 telescope corrections were flagged in sub-array 1. ! A total of 131 telescope corrections were flagged in sub-array 2. ! A total of 276 telescope corrections were flagged in sub-array 3. ! A total of 370 telescope corrections were flagged in sub-array 4. ! A total of 3424 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.944675Jy sigma=0.006186 ! Fit after self-cal, rms=0.626299Jy sigma=0.004028 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.011 mas, bmaj=4.464 mas, bpa=-5.793 degrees ! Estimated noise=898.774 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.573707 Jy ! Component: 100 - total flux cleaned = 0.830068 Jy ! Total flux subtracted in 100 components = 0.830068 Jy ! Clean residual min=-0.030245 max=0.129811 Jy/beam ! Clean residual mean=-0.000030 rms=0.008980 Jy/beam ! Combined flux in latest and established models = 0.830068 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.830068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.520310Jy sigma=0.003292 ! Fit after self-cal, rms=0.518041Jy sigma=0.003283 ! Inverting map ! Added new window around map position (-2.5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148761 Jy ! Component: 100 - total flux cleaned = 0.242261 Jy ! Total flux subtracted in 100 components = 0.242261 Jy ! Clean residual min=-0.024086 max=0.077692 Jy/beam ! Clean residual mean=-0.000035 rms=0.006957 Jy/beam ! Combined flux in latest and established models = 1.07233 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 1.07233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.445175Jy sigma=0.002701 ! Fit after self-cal, rms=0.444268Jy sigma=0.002697 ! Inverting map ! Added new window around map position (-6, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0828783 Jy ! Component: 100 - total flux cleaned = 0.143322 Jy ! Total flux subtracted in 100 components = 0.143322 Jy ! Clean residual min=-0.021711 max=0.067194 Jy/beam ! Clean residual mean=-0.000039 rms=0.006078 Jy/beam ! Combined flux in latest and established models = 1.21565 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 38 components and 1.21565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413091Jy sigma=0.002440 ! Fit after self-cal, rms=0.411849Jy sigma=0.002433 ! Inverting map ! Added new window around map position (3, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0618745 Jy ! Component: 100 - total flux cleaned = 0.108268 Jy ! Total flux subtracted in 100 components = 0.108268 Jy ! Clean residual min=-0.019386 max=0.058313 Jy/beam ! Clean residual mean=-0.000042 rms=0.005487 Jy/beam ! Combined flux in latest and established models = 1.32392 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 1.32392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393999Jy sigma=0.002276 ! Fit after self-cal, rms=0.393681Jy sigma=0.002275 ! Inverting map ! Added new window around map position (-11.5, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0586566 Jy ! Component: 100 - total flux cleaned = 0.0995355 Jy ! Total flux subtracted in 100 components = 0.0995355 Jy ! Clean residual min=-0.017780 max=0.043413 Jy/beam ! Clean residual mean=-0.000047 rms=0.004958 Jy/beam ! Combined flux in latest and established models = 1.42345 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 85 components and 1.42345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.377852Jy sigma=0.002135 ! Fit after self-cal, rms=0.377501Jy sigma=0.002132 ! Inverting map ! Added new window around map position (-18.5, 8.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0464369 Jy ! Component: 100 - total flux cleaned = 0.0837109 Jy ! Total flux subtracted in 100 components = 0.0837109 Jy ! Clean residual min=-0.017537 max=0.039055 Jy/beam ! Clean residual mean=-0.000051 rms=0.004554 Jy/beam ! Combined flux in latest and established models = 1.50716 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 110 components and 1.50716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366260Jy sigma=0.002030 ! Fit after self-cal, rms=0.365880Jy sigma=0.002028 ! Inverting map ! Added new window around map position (-15, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0399034 Jy ! Component: 100 - total flux cleaned = 0.0730027 Jy ! Total flux subtracted in 100 components = 0.0730027 Jy ! Clean residual min=-0.016761 max=0.030264 Jy/beam ! Clean residual mean=-0.000055 rms=0.004216 Jy/beam ! Combined flux in latest and established models = 1.58017 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 124 components and 1.58017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356995Jy sigma=0.001945 ! Fit after self-cal, rms=0.356762Jy sigma=0.001944 ! Inverting map ! Added new window around map position (-9, 3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033739 Jy ! Component: 100 - total flux cleaned = 0.0628758 Jy ! Total flux subtracted in 100 components = 0.0628758 Jy ! Clean residual min=-0.016130 max=0.025730 Jy/beam ! Clean residual mean=-0.000058 rms=0.003962 Jy/beam ! Combined flux in latest and established models = 1.64304 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 140 components and 1.64304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349904Jy sigma=0.001880 ! Fit after self-cal, rms=0.349767Jy sigma=0.001879 ! Inverting map ! Added new window around map position (-22.5, 9.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0293626 Jy ! Component: 100 - total flux cleaned = 0.0552485 Jy ! Total flux subtracted in 100 components = 0.0552485 Jy ! Clean residual min=-0.015955 max=0.018616 Jy/beam ! Clean residual mean=-0.000061 rms=0.003753 Jy/beam ! Combined flux in latest and established models = 1.69829 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 161 components and 1.69829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.344476Jy sigma=0.001830 ! Fit after self-cal, rms=0.344325Jy sigma=0.001829 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.375 mas, bmaj=4.998 mas, bpa=-8.485 degrees ! Estimated noise=604.631 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0510732 Jy ! Component: 100 - total flux cleaned = 0.0934569 Jy ! Component: 150 - total flux cleaned = 0.130448 Jy ! Component: 200 - total flux cleaned = 0.162982 Jy ! Total flux subtracted in 200 components = 0.162982 Jy ! Clean residual min=-0.020373 max=0.027959 Jy/beam ! Clean residual mean=0.000393 rms=0.005405 Jy/beam ! Combined flux in latest and established models = 1.86127 Jy ! Performing phase self-cal ! Adding 107 model components to the UV plane model. ! The established model now contains 239 components and 1.86127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331582Jy sigma=0.001715 ! Fit after self-cal, rms=0.331105Jy sigma=0.001712 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.13 GC 1.06 KP 0.96 ! LA 0.94 NL 0.72 OV 1.05 PT 0.93 ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.08 NY 1.00* ! ON 1.00* TS 1.10 WZ 1.00* HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.02 GC 1.17 KP 1.08 ! LA 0.96 NL 1.04 OV 0.96 PT 0.97 ! SC 0.98 WF 1.11 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.06 NY 0.99 ! ON 0.93 TS 1.00* WZ 0.84 HN 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 0.97 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.05 NY 0.99 ! ON 1.00* TS 1.26 WZ 1.00* HN 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.97 FD 1.01 GC 1.09 KP 1.01 ! LA 0.94 NL 1.02 OV 1.00 PT 0.97 ! SC 1.01 WF 1.03 HH 1.00* KK 1.00* ! MA 1.00* MC 1.21 MK 1.01 NY 1.10 ! ON 0.88 TS 1.15 WZ 0.72 HN 1.04 ! ! ! Correcting IF 2. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.07 GC 1.06 KP 0.91 ! LA 0.94 NL 0.74 OV 1.04 PT 0.92 ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.04 NY 1.00* ! ON 1.00* TS 1.24 WZ 1.00* HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 GC 1.15 KP 0.56 ! LA 0.95 NL 1.05 OV 0.93 PT 1.01 ! SC 1.03 WF 0.96 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.05 NY 1.00 ! ON 0.89 TS 1.00* WZ 1.15 HN 1.16 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 0.96 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.11 NY 1.05 ! ON 1.00* TS 1.12 WZ 1.00* HN 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.00 FD 0.99 GC 1.07 KP 0.87 ! LA 0.95 NL 1.04 OV 0.98 PT 0.98 ! SC 1.03 WF 1.02 HH 1.00* KK 1.00* ! MA 1.00* MC 0.99 MK 1.02 NY 1.02 ! ON 0.88 TS 1.12 WZ 0.96 HN 1.03 ! ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 GC 1.03 KP 0.95 ! LA 0.95 NL 0.72 OV 1.04 PT 0.91 ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.04 NY 1.00* ! ON 1.00* TS 1.08 WZ 1.00* HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 GC 1.11 KP 0.79 ! LA 0.95 NL 0.99 OV 0.95 PT 0.95 ! SC 1.00 WF 1.00 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.05 NY 1.00 ! ON 0.83 TS 1.00* WZ 1.10 HN 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 0.94 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.05 NY 1.10 ! ON 1.00* TS 1.19 WZ 1.00* HN 1.00* ! ! A total of 63 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 0.96 GC 1.06 KP 1.00 ! LA 0.94 NL 0.99 OV 1.00 PT 0.94 ! SC 1.00 WF 0.89 HH 1.00* KK 1.00* ! MA 1.00* MC 1.16 MK 1.01 NY 1.07 ! ON 0.85 TS 1.13 WZ 0.96 HN 1.04 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.09 GC 1.04 KP 0.93 ! LA 0.95 NL 0.71 OV 1.04 PT 0.92 ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.03 NY 1.00* ! ON 1.00* TS 1.16 WZ 1.00* HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 21 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.99 GC 1.06 KP 0.62 ! LA 0.94 NL 1.01 OV 0.93 PT 0.97 ! SC 0.96 WF 0.97 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.05 NY 0.97 ! ON 0.82 TS 1.00* WZ 1.07 HN 1.18 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 0.96 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.07 NY 0.96 ! ON 1.00* TS 1.16 WZ 1.00* HN 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.00 GC 1.05 KP 0.92 ! LA 0.95 NL 1.00 OV 0.98 PT 0.97 ! SC 0.99 WF 1.03 HH 1.00* KK 1.00* ! MA 1.00* MC 1.28 MK 1.01 NY 1.02 ! ON 0.88 TS 1.12 WZ 0.94 HN 1.01 ! ! ! Fit before self-cal, rms=0.331105Jy sigma=0.001712 ! Fit after self-cal, rms=0.296466Jy sigma=0.001578 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=5.127 mas, bpa=-9.269 degrees ! Estimated noise=602.959 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-26.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316658 Jy ! Component: 100 - total flux cleaned = 0.054597 Jy ! Component: 150 - total flux cleaned = 0.0732119 Jy ! Component: 200 - total flux cleaned = 0.0886355 Jy ! Total flux subtracted in 200 components = 0.0886355 Jy ! Clean residual min=-0.012144 max=0.020651 Jy/beam ! Clean residual mean=0.000427 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 1.94991 Jy ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 314 components and 1.94991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.292239Jy sigma=0.001533 ! Fit after self-cal, rms=0.291729Jy sigma=0.001529 ! Inverting map ! Added new window around map position (-32.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.021579 Jy ! Component: 100 - total flux cleaned = 0.0369605 Jy ! Component: 150 - total flux cleaned = 0.0500941 Jy ! Component: 200 - total flux cleaned = 0.0614392 Jy ! Total flux subtracted in 200 components = 0.0614392 Jy ! Clean residual min=-0.011926 max=0.012225 Jy/beam ! Clean residual mean=0.000291 rms=0.003161 Jy/beam ! Combined flux in latest and established models = 2.01135 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 356 components and 2.01135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289618Jy sigma=0.001507 ! Fit after self-cal, rms=0.289434Jy sigma=0.001506 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289434Jy sigma=0.001506 ! Fit after self-cal, rms=0.281886Jy sigma=0.001437 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=5.113 mas, bpa=-9.241 degrees ! Estimated noise=606.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135423 Jy ! Component: 100 - total flux cleaned = 0.0244367 Jy ! Component: 150 - total flux cleaned = 0.0338853 Jy ! Component: 200 - total flux cleaned = 0.0421775 Jy ! Total flux subtracted in 200 components = 0.0421775 Jy ! Clean residual min=-0.010217 max=0.009908 Jy/beam ! Clean residual mean=0.000256 rms=0.002494 Jy/beam ! Combined flux in latest and established models = 2.05353 Jy selfcal ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 397 components and 2.05352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280871Jy sigma=0.001427 ! Fit after self-cal, rms=0.280773Jy sigma=0.001426 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00827431 Jy ! Component: 100 - total flux cleaned = 0.0151992 Jy ! Component: 150 - total flux cleaned = 0.0203413 Jy ! Component: 200 - total flux cleaned = 0.024062 Jy ! Total flux subtracted in 200 components = 0.024062 Jy ! Clean residual min=-0.009750 max=0.009913 Jy/beam ! Clean residual mean=0.000204 rms=0.002412 Jy/beam ! Combined flux in latest and established models = 2.07759 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 422 components and 2.07759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280326Jy sigma=0.001422 ! Fit after self-cal, rms=0.280269Jy sigma=0.001422 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280269Jy sigma=0.001422 ! Fit after self-cal, rms=0.274369Jy sigma=0.001383 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=5.113 mas, bpa=-9.29 degrees ! Estimated noise=604.275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00795778 Jy ! Component: 100 - total flux cleaned = 0.0118913 Jy ! Component: 150 - total flux cleaned = 0.015581 Jy ! Component: 200 - total flux cleaned = 0.0190706 Jy ! Total flux subtracted in 200 components = 0.0190706 Jy ! Clean residual min=-0.007055 max=0.009771 Jy/beam ! Clean residual mean=0.000165 rms=0.001960 Jy/beam ! Combined flux in latest and established models = 2.09666 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 457 components and 2.09666 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273932Jy sigma=0.001378 ! Fit after self-cal, rms=0.273903Jy sigma=0.001378 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-68.5, 29.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0104237 Jy ! Component: 100 - total flux cleaned = 0.0170804 Jy ! Component: 150 - total flux cleaned = 0.0211466 Jy ! Component: 200 - total flux cleaned = 0.0246408 Jy ! Total flux subtracted in 200 components = 0.0246408 Jy ! Clean residual min=-0.006609 max=0.008546 Jy/beam ! Clean residual mean=0.000129 rms=0.001825 Jy/beam ! Combined flux in latest and established models = 2.1213 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 511 components and 2.1213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273382Jy sigma=0.001373 ! Fit after self-cal, rms=0.273357Jy sigma=0.001373 ! Inverting map ! Added new window around map position (-44.5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00946811 Jy ! Component: 100 - total flux cleaned = 0.0157657 Jy ! Component: 150 - total flux cleaned = 0.0210931 Jy ! Component: 200 - total flux cleaned = 0.0251961 Jy ! Total flux subtracted in 200 components = 0.0251961 Jy ! Clean residual min=-0.006505 max=0.008013 Jy/beam ! Clean residual mean=0.000074 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 2.14649 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 548 components and 2.14649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272915Jy sigma=0.001368 ! Fit after self-cal, rms=0.272902Jy sigma=0.001368 ! Inverting map ! Added new window around map position (-56.5, 16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00833764 Jy ! Component: 100 - total flux cleaned = 0.0135867 Jy ! Component: 150 - total flux cleaned = 0.0179575 Jy ! Component: 200 - total flux cleaned = 0.0220358 Jy ! Total flux subtracted in 200 components = 0.0220358 Jy ! Clean residual min=-0.006125 max=0.006381 Jy/beam ! Clean residual mean=0.000032 rms=0.001591 Jy/beam ! Combined flux in latest and established models = 2.16853 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 582 components and 2.16853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272543Jy sigma=0.001365 ! Fit after self-cal, rms=0.272515Jy sigma=0.001365 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272515Jy sigma=0.001365 ! Fit after self-cal, rms=0.271884Jy sigma=0.001364 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.403 mas, bmaj=8.831 mas, bpa=-1.959 degrees ! Estimated noise=819.577 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143557 Jy ! Component: 100 - total flux cleaned = 0.0259556 Jy ! Component: 150 - total flux cleaned = 0.035744 Jy ! Component: 200 - total flux cleaned = 0.0431223 Jy ! Total flux subtracted in 200 components = 0.0431223 Jy ! Clean residual min=-0.010303 max=0.012398 Jy/beam ! Clean residual mean=-0.000066 rms=0.003199 Jy/beam ! Combined flux in latest and established models = 2.21165 Jy selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 631 components and 2.21165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271603Jy sigma=0.001361 ! Fit after self-cal, rms=0.271576Jy sigma=0.001360 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746911 Jy ! Component: 100 - total flux cleaned = 0.0132875 Jy ! Component: 150 - total flux cleaned = 0.0183778 Jy ! Component: 200 - total flux cleaned = 0.0224159 Jy ! Total flux subtracted in 200 components = 0.0224159 Jy ! Clean residual min=-0.009484 max=0.012597 Jy/beam ! Clean residual mean=-0.000203 rms=0.002993 Jy/beam ! Combined flux in latest and established models = 2.23407 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 659 components and 2.23407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271514Jy sigma=0.001360 ! Fit after self-cal, rms=0.271502Jy sigma=0.001359 ! Inverting map ! Added new window around map position (-82.5, 27). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126931 Jy ! Component: 100 - total flux cleaned = 0.0203802 Jy ! Component: 150 - total flux cleaned = 0.0265226 Jy ! Component: 200 - total flux cleaned = 0.031129 Jy ! Total flux subtracted in 200 components = 0.031129 Jy ! Clean residual min=-0.009296 max=0.010644 Jy/beam ! Clean residual mean=-0.000328 rms=0.002834 Jy/beam ! Combined flux in latest and established models = 2.2652 Jy ! Performing phase self-cal ! Adding 93 model components to the UV plane model. ! The established model now contains 741 components and 2.2652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271302Jy sigma=0.001357 ! Fit after self-cal, rms=0.271283Jy sigma=0.001357 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.416 mas, bmaj=5.12 mas, bpa=-9.372 degrees ! Estimated noise=603.689 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.416 x 5.12 at -9.372 degrees (North through East) ! Clean map min=-0.0050362 max=0.75986 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.271283Jy sigma=0.001357 ! Fit after self-cal, rms=0.267091Jy sigma=0.001268 ! Inverting map and beam ! Estimated beam: bmin=2.415 mas, bmaj=5.123 mas, bpa=-9.324 degrees ! Estimated noise=602.506 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243356 Jy ! Component: 100 - total flux cleaned = 0.00546761 Jy ! Component: 150 - total flux cleaned = 0.00854534 Jy ! Component: 200 - total flux cleaned = 0.0109593 Jy ! Total flux subtracted in 200 components = 0.0109593 Jy ! Clean residual min=-0.004881 max=0.006142 Jy/beam ! Clean residual mean=-0.000057 rms=0.001253 Jy/beam ! Combined flux in latest and established models = 2.27616 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 776 components and 2.27616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266883Jy sigma=0.001266 ! Fit after self-cal, rms=0.266872Jy sigma=0.001266 ! Inverting map ! Added new window around map position (-125.5, 23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00557959 Jy ! Component: 100 - total flux cleaned = 0.00850453 Jy ! Component: 150 - total flux cleaned = 0.0115371 Jy ! Component: 200 - total flux cleaned = 0.0140065 Jy ! Total flux subtracted in 200 components = 0.0140065 Jy ! Clean residual min=-0.004877 max=0.004887 Jy/beam ! Clean residual mean=-0.000071 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 2.29016 Jy ! Performing phase self-cal ! Adding 71 model components to the UV plane model. ! The established model now contains 814 components and 2.29016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266666Jy sigma=0.001265 ! Fit after self-cal, rms=0.266661Jy sigma=0.001264 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266661Jy sigma=0.001264 ! Fit after self-cal, rms=0.266366Jy sigma=0.001264 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.044 mas, bmaj=4.523 mas, bpa=-6.537 degrees ! Estimated noise=915.205 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.578301 Jy ! Component: 100 - total flux cleaned = 0.834339 Jy ! Component: 150 - total flux cleaned = 0.982383 Jy ! Component: 200 - total flux cleaned = 1.09026 Jy ! Total flux subtracted in 200 components = 1.09026 Jy ! Clean residual min=-0.020752 max=0.063602 Jy/beam ! Clean residual mean=0.000020 rms=0.006482 Jy/beam ! Combined flux in latest and established models = 1.09026 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 1.09026 Jy ! Inverting map and beam ! Estimated beam: bmin=2.414 mas, bmaj=5.128 mas, bpa=-9.349 degrees ! Estimated noise=601.968 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142919 Jy ! Component: 100 - total flux cleaned = 0.25308 Jy ! Component: 150 - total flux cleaned = 0.343467 Jy ! Component: 200 - total flux cleaned = 0.419076 Jy ! Total flux subtracted in 200 components = 0.419076 Jy ! Clean residual min=-0.022148 max=0.046186 Jy/beam ! Clean residual mean=0.001525 rms=0.007644 Jy/beam ! Combined flux in latest and established models = 1.50934 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 107 components and 1.50934 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0643017 Jy ! Component: 100 - total flux cleaned = 0.119758 Jy ! Component: 150 - total flux cleaned = 0.168077 Jy ! Component: 200 - total flux cleaned = 0.21084 Jy ! Total flux subtracted in 200 components = 0.21084 Jy ! Clean residual min=-0.015387 max=0.026892 Jy/beam ! Clean residual mean=0.001067 rms=0.005122 Jy/beam ! Combined flux in latest and established models = 1.72018 Jy ! Adding 102 model components to the UV plane model. ! The established model now contains 189 components and 1.72018 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380481 Jy ! Component: 100 - total flux cleaned = 0.0719744 Jy ! Component: 150 - total flux cleaned = 0.102424 Jy ! Component: 200 - total flux cleaned = 0.129857 Jy ! Total flux subtracted in 200 components = 0.129857 Jy ! Clean residual min=-0.011640 max=0.017315 Jy/beam ! Clean residual mean=0.000786 rms=0.003759 Jy/beam ! Combined flux in latest and established models = 1.85003 Jy ! Adding 105 model components to the UV plane model. ! The established model now contains 264 components and 1.85003 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0247931 Jy ! Component: 100 - total flux cleaned = 0.0473182 Jy ! Component: 150 - total flux cleaned = 0.0678286 Jy ! Component: 200 - total flux cleaned = 0.0865521 Jy ! Total flux subtracted in 200 components = 0.0865521 Jy ! Clean residual min=-0.009310 max=0.012331 Jy/beam ! Clean residual mean=0.000598 rms=0.002979 Jy/beam ! Combined flux in latest and established models = 1.93659 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 327 components and 1.93659 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.401 mas, bmaj=8.846 mas, bpa=-1.929 degrees ! Estimated noise=817.079 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457374 Jy ! Component: 100 - total flux cleaned = 0.0824247 Jy ! Component: 150 - total flux cleaned = 0.113408 Jy ! Component: 200 - total flux cleaned = 0.1402 Jy ! Total flux subtracted in 200 components = 0.1402 Jy ! Clean residual min=-0.012699 max=0.017253 Jy/beam ! Clean residual mean=0.000991 rms=0.005236 Jy/beam ! Combined flux in latest and established models = 2.07679 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235602 Jy ! Component: 100 - total flux cleaned = 0.0444352 Jy ! Component: 150 - total flux cleaned = 0.0630906 Jy ! Component: 200 - total flux cleaned = 0.0799069 Jy ! Total flux subtracted in 200 components = 0.0799069 Jy ! Clean residual min=-0.010030 max=0.012586 Jy/beam ! Clean residual mean=0.000539 rms=0.003833 Jy/beam ! Combined flux in latest and established models = 2.15669 Jy ! Adding 243 model components to the UV plane model. ! The established model now contains 510 components and 2.15669 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.414 mas, bmaj=5.128 mas, bpa=-9.349 degrees ! Estimated noise=601.968 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911623 Jy ! Component: 100 - total flux cleaned = 0.0170697 Jy ! Component: 150 - total flux cleaned = 0.0243366 Jy ! Component: 200 - total flux cleaned = 0.0311126 Jy ! Total flux subtracted in 200 components = 0.0311126 Jy ! Clean residual min=-0.005433 max=0.006605 Jy/beam ! Clean residual mean=0.000112 rms=0.001471 Jy/beam ! Combined flux in latest and established models = 2.18781 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 557 components and 2.18781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.267716Jy sigma=0.001276 ! Fit after self-cal, rms=0.267576Jy sigma=0.001274 wmodel J1230+1223_S_2000_03_13_pus_map.mod ! Writing 557 model components to file: J1230+1223_S_2000_03_13_pus_map.mod wobs J1230+1223_S_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J1230+1223_S_2000_03_13_pus_uvs.fits wwins J1230+1223_S_2000_03_13_pus_map.win ! wwins: Wrote 16 windows to J1230+1223_S_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282557 Jy ! Component: 100 - total flux cleaned = 0.00541147 Jy ! Component: 150 - total flux cleaned = 0.00746804 Jy ! Component: 200 - total flux cleaned = 0.00916394 Jy ! Component: 250 - total flux cleaned = 0.0105338 Jy ! Component: 300 - total flux cleaned = 0.0117802 Jy ! Component: 350 - total flux cleaned = 0.0128247 Jy ! Component: 400 - total flux cleaned = 0.0139331 Jy ! Component: 450 - total flux cleaned = 0.0151044 Jy ! Component: 500 - total flux cleaned = 0.0159259 Jy ! Component: 550 - total flux cleaned = 0.0166548 Jy ! Component: 600 - total flux cleaned = 0.0176916 Jy ! Component: 650 - total flux cleaned = 0.0185556 Jy ! Component: 700 - total flux cleaned = 0.019254 Jy ! Component: 750 - total flux cleaned = 0.0200984 Jy ! Component: 800 - total flux cleaned = 0.020857 Jy ! Component: 850 - total flux cleaned = 0.0214579 Jy ! Component: 900 - total flux cleaned = 0.0222759 Jy ! Component: 950 - total flux cleaned = 0.0228652 Jy ! Component: 1000 - total flux cleaned = 0.0234488 Jy ! Component: 1050 - total flux cleaned = 0.0239557 Jy ! Component: 1100 - total flux cleaned = 0.0246722 Jy ! Component: 1150 - total flux cleaned = 0.0251689 Jy ! Component: 1200 - total flux cleaned = 0.0254508 Jy ! Component: 1250 - total flux cleaned = 0.025941 Jy ! Component: 1300 - total flux cleaned = 0.0264959 Jy ! Component: 1350 - total flux cleaned = 0.0268407 Jy ! Component: 1400 - total flux cleaned = 0.0273875 Jy ! Component: 1450 - total flux cleaned = 0.0278627 Jy ! Component: 1500 - total flux cleaned = 0.0283343 Jy ! Component: 1550 - total flux cleaned = 0.0288029 Jy ! Component: 1600 - total flux cleaned = 0.0292681 Jy ! Component: 1650 - total flux cleaned = 0.029665 Jy ! Component: 1700 - total flux cleaned = 0.0301899 Jy ! Component: 1750 - total flux cleaned = 0.0308416 Jy ! Component: 1800 - total flux cleaned = 0.0311006 Jy ! Component: 1850 - total flux cleaned = 0.0315515 Jy ! Component: 1900 - total flux cleaned = 0.0319994 Jy ! Component: 1950 - total flux cleaned = 0.0325086 Jy ! Component: 2000 - total flux cleaned = 0.0330141 Jy ! Component: 2050 - total flux cleaned = 0.0333285 Jy ! Component: 2100 - total flux cleaned = 0.0338909 Jy ! Component: 2150 - total flux cleaned = 0.0340774 Jy ! Component: 2200 - total flux cleaned = 0.0347575 Jy ! Component: 2250 - total flux cleaned = 0.0351259 Jy ! Component: 2300 - total flux cleaned = 0.0354307 Jy ! Component: 2350 - total flux cleaned = 0.0357346 Jy ! Component: 2400 - total flux cleaned = 0.0360978 Jy ! Component: 2450 - total flux cleaned = 0.0364587 Jy ! Component: 2500 - total flux cleaned = 0.0366978 Jy ! Component: 2550 - total flux cleaned = 0.036995 Jy ! Component: 2600 - total flux cleaned = 0.0373506 Jy ! Component: 2650 - total flux cleaned = 0.0377632 Jy ! Component: 2700 - total flux cleaned = 0.0381147 Jy ! Component: 2750 - total flux cleaned = 0.0382316 Jy ! Component: 2800 - total flux cleaned = 0.0388693 Jy ! Component: 2850 - total flux cleaned = 0.0389267 Jy ! Component: 2900 - total flux cleaned = 0.0393288 Jy ! Component: 2950 - total flux cleaned = 0.0397293 Jy ! Component: 3000 - total flux cleaned = 0.0401842 Jy ! Component: 3050 - total flux cleaned = 0.0403543 Jy ! Component: 3100 - total flux cleaned = 0.0406362 Jy ! Component: 3150 - total flux cleaned = 0.0411406 Jy ! Component: 3200 - total flux cleaned = 0.0413632 Jy ! Component: 3250 - total flux cleaned = 0.0415857 Jy ! Component: 3300 - total flux cleaned = 0.0418625 Jy ! Component: 3350 - total flux cleaned = 0.0422478 Jy ! Component: 3400 - total flux cleaned = 0.0425221 Jy ! Component: 3450 - total flux cleaned = 0.0428498 Jy ! Component: 3500 - total flux cleaned = 0.0432302 Jy ! Component: 3550 - total flux cleaned = 0.0433387 Jy ! Component: 3600 - total flux cleaned = 0.0439852 Jy ! Component: 3650 - total flux cleaned = 0.0440925 Jy ! Component: 3700 - total flux cleaned = 0.0443594 Jy ! Component: 3750 - total flux cleaned = 0.0447321 Jy ! Component: 3800 - total flux cleaned = 0.0448381 Jy ! Component: 3850 - total flux cleaned = 0.0452072 Jy ! Component: 3900 - total flux cleaned = 0.04547 Jy ! Component: 3950 - total flux cleaned = 0.0457839 Jy ! Component: 4000 - total flux cleaned = 0.0459922 Jy ! Component: 4050 - total flux cleaned = 0.0461997 Jy ! Total flux subtracted in 4096 components = 0.0466137 Jy ! Clean residual min=-0.002838 max=0.002849 Jy/beam ! Clean residual mean=0.000035 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 2.23442 Jy keep ! Adding 389 model components to the UV plane model. ! The established model now contains 931 components and 2.23442 Jy ![Exited script file: muppet] wmap "J1230+1223_S_2000_03_13_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.414 x 5.128 at -9.349 degrees (North through East) ! Clean map min=-0.0038669 max=0.76231 Jy/beam ! Writing clean map to FITS file: J1230+1223_S_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.762305 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000986346 device "J1230+1223_S_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J1230+1223_S_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.38817 0.38817 0.77634 1.55268 3.10536 6.21072 12.4214 24.8429 49.6857 99.3715 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.762 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.414 x 5.128 at -9.349 degrees (North through East) ! Clean map min=-0.0038669 max=0.76231 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J1230+1223_S_2000_03_13_pus_uvs.log closed on Tue Apr 2 23:57:52 2013