! Started logfile: J0555+3948_X_2000_03_13_pus_uvs.log on Wed Apr 3 15:55:49 2013 obs J0555+3948_X_2000_03_13_pus_uva.fits ! Reading UV FITS file: J0555+3948_X_2000_03_13_pus_uva.fits ! AN table 1: 587 integrations on 190 of 190 possible baselines. ! AN table 2: 113 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.16491 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0555+3948 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2386 lines of history. ! ! Reading 87732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0555+3948_X_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8064 telescope corrections were flagged in sub-array 1. ! A total of 993 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 8065 telescope corrections were flagged in sub-array 1. ! A total of 993 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 8065 telescope corrections were flagged in sub-array 1. ! A total of 993 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 8066 telescope corrections were flagged in sub-array 1. ! A total of 992 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=3.238710Jy sigma=0.029318 ! Fit after self-cal, rms=2.737790Jy sigma=0.025331 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.5299 mas, bmaj=0.7485 mas, bpa=-4.465 degrees ! Estimated noise=617.745 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.39435 Jy ! Component: 100 - total flux cleaned = 3.18361 Jy ! Total flux subtracted in 100 components = 3.18361 Jy ! Clean residual min=-0.066043 max=0.374936 Jy/beam ! Clean residual mean=-0.000456 rms=0.019839 Jy/beam ! Combined flux in latest and established models = 3.18361 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 3.18361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.171829Jy sigma=0.011246 ! Fit after self-cal, rms=1.167207Jy sigma=0.011224 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Added new window around map position (-0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.473493 Jy ! Component: 100 - total flux cleaned = 0.806232 Jy ! Total flux subtracted in 100 components = 0.806232 Jy ! Clean residual min=-0.042166 max=0.187283 Jy/beam ! Clean residual mean=-0.000573 rms=0.012501 Jy/beam ! Combined flux in latest and established models = 3.98984 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 3.98984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.787098Jy sigma=0.007243 ! Fit after self-cal, rms=0.782570Jy sigma=0.007222 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249727 Jy ! Component: 100 - total flux cleaned = 0.438146 Jy ! Total flux subtracted in 100 components = 0.438146 Jy ! Clean residual min=-0.032728 max=0.112438 Jy/beam ! Clean residual mean=-0.000637 rms=0.009172 Jy/beam ! Combined flux in latest and established models = 4.42799 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 4.42799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.626337Jy sigma=0.005343 ! Fit after self-cal, rms=0.623231Jy sigma=0.005327 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15429 Jy ! Component: 100 - total flux cleaned = 0.274712 Jy ! Total flux subtracted in 100 components = 0.274712 Jy ! Clean residual min=-0.027047 max=0.077662 Jy/beam ! Clean residual mean=-0.000677 rms=0.007419 Jy/beam ! Combined flux in latest and established models = 4.7027 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 4.7027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.552653Jy sigma=0.004340 ! Fit after self-cal, rms=0.550621Jy sigma=0.004327 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.101492 Jy ! Component: 100 - total flux cleaned = 0.181465 Jy ! Total flux subtracted in 100 components = 0.181465 Jy ! Clean residual min=-0.023861 max=0.055796 Jy/beam ! Clean residual mean=-0.000704 rms=0.006479 Jy/beam ! Combined flux in latest and established models = 4.88417 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 38 components and 4.88417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518609Jy sigma=0.003792 ! Fit after self-cal, rms=0.517678Jy sigma=0.003785 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0696391 Jy ! Component: 100 - total flux cleaned = 0.124745 Jy ! Total flux subtracted in 100 components = 0.124745 Jy ! Clean residual min=-0.023491 max=0.042311 Jy/beam ! Clean residual mean=-0.000724 rms=0.005979 Jy/beam ! Combined flux in latest and established models = 5.00891 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 41 components and 5.00891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.504014Jy sigma=0.003507 ! Fit after self-cal, rms=0.503491Jy sigma=0.003503 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Added new window around map position (0.6, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0492744 Jy ! Component: 100 - total flux cleaned = 0.0896013 Jy ! Total flux subtracted in 100 components = 0.0896013 Jy ! Clean residual min=-0.024074 max=0.031816 Jy/beam ! Clean residual mean=-0.000738 rms=0.005711 Jy/beam ! Combined flux in latest and established models = 5.09851 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 49 components and 5.09851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.497214Jy sigma=0.003358 ! Fit after self-cal, rms=0.497087Jy sigma=0.003357 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6508 mas, bmaj=0.9065 mas, bpa=-0.6969 degrees ! Estimated noise=314.735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0736955 Jy ! Component: 100 - total flux cleaned = 0.117475 Jy ! Component: 150 - total flux cleaned = 0.145555 Jy ! Component: 200 - total flux cleaned = 0.163863 Jy ! Total flux subtracted in 200 components = 0.163863 Jy ! Clean residual min=-0.049852 max=0.046459 Jy/beam ! Clean residual mean=-0.006730 rms=0.013928 Jy/beam ! Combined flux in latest and established models = 5.26238 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 57 components and 5.26238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.495541Jy sigma=0.003154 ! Fit after self-cal, rms=0.495435Jy sigma=0.003153 ! Inverting map ! Your choice of large map pixels excluded 4.07% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.95 GC 1.03 KP 1.01 ! LA 0.98 NL 0.96 OV 0.96 PT 0.98 ! SC 1.00 WF 1.07 HH 1.00* KK 1.03 ! MA 1.00 MC 1.02 MK 1.03 NY 0.96 ! ON 1.03 TS 1.07 WZ 0.99 HN 1.21 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 1.00 GC 1.04 KP 1.13 ! LA 1.06 NL 1.04 OV 0.95 PT 1.04 ! SC 1.02 WF 1.08 HH 1.05 KK 0.95 ! MA 1.00 MC 0.94 MK 0.95 NY 0.96 ! ON 0.99 TS 0.97 WZ 1.00* HN 1.20 ! ! ! Correcting IF 2. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 GC 1.01 KP 0.98 ! LA 0.94 NL 0.99 OV 0.95 PT 0.95 ! SC 0.99 WF 1.07 HH 1.00* KK 1.04 ! MA 1.00 MC 1.03 MK 1.08 NY 1.00 ! ON 1.03 TS 1.08 WZ 0.99 HN 1.26 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 GC 1.03 KP 1.10 ! LA 1.02 NL 1.07 OV 0.93 PT 1.00 ! SC 1.01 WF 1.09 HH 1.03 KK 0.96 ! MA 1.01 MC 0.95 MK 0.99 NY 1.00 ! ON 1.00 TS 0.98 WZ 1.00* HN 1.22 ! ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.98 GC 1.03 KP 1.00 ! LA 0.94 NL 0.96 OV 0.96 PT 0.98 ! SC 1.02 WF 1.08 HH 1.00* KK 1.02 ! MA 1.00 MC 1.03 MK 1.05 NY 1.05 ! ON 1.04 TS 1.12 WZ 1.02 HN 1.21 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 1.04 GC 1.05 KP 1.12 ! LA 1.02 NL 1.03 OV 0.95 PT 1.03 ! SC 1.05 WF 1.10 HH 1.03 KK 0.95 ! MA 0.99 MC 0.94 MK 0.96 NY 1.05 ! ON 1.01 TS 1.02 WZ 1.00* HN 1.22 ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 GC 1.03 KP 0.99 ! LA 0.96 NL 0.97 OV 0.97 PT 1.00 ! SC 1.07 WF 1.10 HH 1.00* KK 1.04 ! MA 0.99 MC 1.05 MK 1.07 NY 1.04 ! ON 1.05 TS 1.14 WZ 1.04 HN 1.23 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.03 GC 1.05 KP 1.10 ! LA 1.04 NL 1.05 OV 0.96 PT 1.04 ! SC 1.11 WF 1.10 HH 1.07 KK 0.96 ! MA 0.98 MC 0.95 MK 0.98 NY 1.04 ! ON 1.02 TS 1.04 WZ 1.00* HN 1.20 ! ! ! Fit before self-cal, rms=0.495435Jy sigma=0.003153 ! Fit after self-cal, rms=0.442951Jy sigma=0.002181 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6535 mas, bmaj=0.9109 mas, bpa=-0.544 degrees ! Estimated noise=317.371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0266273 Jy ! Component: 100 - total flux cleaned = -0.0302522 Jy ! Component: 150 - total flux cleaned = -0.0317413 Jy ! Component: 200 - total flux cleaned = -0.0321458 Jy ! Total flux subtracted in 200 components = -0.0321458 Jy ! Clean residual min=-0.019978 max=0.016126 Jy/beam ! Clean residual mean=-0.002962 rms=0.004925 Jy/beam ! Combined flux in latest and established models = 5.23023 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 61 components and 5.23023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440106Jy sigma=0.002157 ! Fit after self-cal, rms=0.440168Jy sigma=0.002157 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440168Jy sigma=0.002157 ! Fit after self-cal, rms=0.399207Jy sigma=0.001601 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6526 mas, bmaj=0.9124 mas, bpa=-0.5146 degrees ! Estimated noise=317.478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00184175 Jy ! Component: 100 - total flux cleaned = -0.00129813 Jy ! Component: 150 - total flux cleaned = -0.00215603 Jy ! Component: 200 - total flux cleaned = -0.00288972 Jy ! Total flux subtracted in 200 components = -0.00288972 Jy ! Clean residual min=-0.009069 max=0.009059 Jy/beam ! Clean residual mean=-0.000024 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 5.22734 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 66 components and 5.22734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398018Jy sigma=0.001585 ! Fit after self-cal, rms=0.398000Jy sigma=0.001584 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130757 Jy ! Component: 100 - total flux cleaned = 0.00130538 Jy ! Component: 150 - total flux cleaned = 0.00102739 Jy ! Component: 200 - total flux cleaned = 0.000772793 Jy ! Total flux subtracted in 200 components = 0.000772793 Jy ! Clean residual min=-0.006918 max=0.007585 Jy/beam ! Clean residual mean=-0.000028 rms=0.001738 Jy/beam ! Combined flux in latest and established models = 5.22811 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 69 components and 5.22811 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397446Jy sigma=0.001578 ! Fit after self-cal, rms=0.397399Jy sigma=0.001578 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.397399Jy sigma=0.001578 ! Fit after self-cal, rms=0.396667Jy sigma=0.001553 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6518 mas, bmaj=0.9132 mas, bpa=-0.4534 degrees ! Estimated noise=317.612 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.82e-05 Jy ! Component: 100 - total flux cleaned = -0.000713003 Jy ! Component: 150 - total flux cleaned = -0.00130777 Jy ! Component: 200 - total flux cleaned = -0.00207878 Jy ! Total flux subtracted in 200 components = -0.00207878 Jy ! Clean residual min=-0.006269 max=0.007269 Jy/beam ! Clean residual mean=-0.000014 rms=0.001400 Jy/beam ! Combined flux in latest and established models = 5.22603 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 5.22603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.396152Jy sigma=0.001546 ! Fit after self-cal, rms=0.396133Jy sigma=0.001546 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000852452 Jy ! Component: 100 - total flux cleaned = 0.000402372 Jy ! Component: 150 - total flux cleaned = 0.000208102 Jy ! Component: 200 - total flux cleaned = 2.95776e-05 Jy ! Total flux subtracted in 200 components = 2.95776e-05 Jy ! Clean residual min=-0.006068 max=0.006430 Jy/beam ! Clean residual mean=-0.000014 rms=0.001356 Jy/beam ! Combined flux in latest and established models = 5.22606 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 5.22606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395846Jy sigma=0.001543 ! Fit after self-cal, rms=0.395826Jy sigma=0.001543 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Added new window around map position (0, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256684 Jy ! Component: 100 - total flux cleaned = 0.00292299 Jy ! Component: 150 - total flux cleaned = 0.00292005 Jy ! Component: 200 - total flux cleaned = 0.00307229 Jy ! Total flux subtracted in 200 components = 0.00307229 Jy ! Clean residual min=-0.005797 max=0.005413 Jy/beam ! Clean residual mean=-0.000031 rms=0.001313 Jy/beam ! Combined flux in latest and established models = 5.22914 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 5.22914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395536Jy sigma=0.001539 ! Fit after self-cal, rms=0.395526Jy sigma=0.001539 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395526Jy sigma=0.001539 ! Fit after self-cal, rms=0.395939Jy sigma=0.001532 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=2.347 mas, bmaj=2.505 mas, bpa=52.07 degrees ! Estimated noise=454.984 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480369 Jy ! Component: 100 - total flux cleaned = 0.00682343 Jy ! Component: 150 - total flux cleaned = 0.00717785 Jy ! Component: 200 - total flux cleaned = 0.00730408 Jy ! Total flux subtracted in 200 components = 0.00730408 Jy ! Clean residual min=-0.007923 max=0.007693 Jy/beam ! Clean residual mean=-0.000148 rms=0.002069 Jy/beam ! Combined flux in latest and established models = 5.23644 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 85 components and 5.23644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395908Jy sigma=0.001533 ! Fit after self-cal, rms=0.395904Jy sigma=0.001533 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000343202 Jy ! Component: 100 - total flux cleaned = 0.000468043 Jy ! Component: 150 - total flux cleaned = 0.000438524 Jy ! Component: 200 - total flux cleaned = 0.000408971 Jy ! Total flux subtracted in 200 components = 0.000408971 Jy ! Clean residual min=-0.007785 max=0.007595 Jy/beam ! Clean residual mean=-0.000155 rms=0.002054 Jy/beam ! Combined flux in latest and established models = 5.23685 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 5.23685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395890Jy sigma=0.001532 ! Fit after self-cal, rms=0.395889Jy sigma=0.001532 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6515 mas, bmaj=0.914 mas, bpa=-0.4117 degrees ! Estimated noise=317.992 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6515 x 0.914 at -0.4117 degrees (North through East) ! Clean map min=-0.0046962 max=3.4558 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.395889Jy sigma=0.001532 ! Fit after self-cal, rms=0.365959Jy sigma=0.001190 ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6517 mas, bmaj=0.9141 mas, bpa=-0.419 degrees ! Estimated noise=317.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00205919 Jy ! Component: 100 - total flux cleaned = -0.00261419 Jy ! Component: 150 - total flux cleaned = -0.0029503 Jy ! Component: 200 - total flux cleaned = -0.00310513 Jy ! Total flux subtracted in 200 components = -0.00310513 Jy ! Clean residual min=-0.003960 max=0.004122 Jy/beam ! Clean residual mean=-0.000031 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 5.23374 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 90 components and 5.23374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365729Jy sigma=0.001188 ! Fit after self-cal, rms=0.365725Jy sigma=0.001187 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200466 Jy ! Component: 100 - total flux cleaned = 0.000197238 Jy ! Component: 150 - total flux cleaned = 0.000201982 Jy ! Component: 200 - total flux cleaned = 0.000204261 Jy ! Total flux subtracted in 200 components = 0.000204261 Jy ! Clean residual min=-0.003295 max=0.004164 Jy/beam ! Clean residual mean=-0.000032 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 5.23395 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 5.23395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365534Jy sigma=0.001185 ! Fit after self-cal, rms=0.365531Jy sigma=0.001185 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Added new window around map position (2.2, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275577 Jy ! Component: 100 - total flux cleaned = 0.00303332 Jy ! Component: 150 - total flux cleaned = 0.00328609 Jy ! Component: 200 - total flux cleaned = 0.0034031 Jy ! Total flux subtracted in 200 components = 0.0034031 Jy ! Clean residual min=-0.003433 max=0.003244 Jy/beam ! Clean residual mean=-0.000050 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 5.23735 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 103 components and 5.23735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365366Jy sigma=0.001183 ! Fit after self-cal, rms=0.365365Jy sigma=0.001182 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365365Jy sigma=0.001182 ! Fit after self-cal, rms=0.365644Jy sigma=0.001181 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.5289 mas, bmaj=0.7546 mas, bpa=-4.549 degrees ! Estimated noise=629.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.43384 Jy ! Component: 100 - total flux cleaned = 3.25414 Jy ! Component: 150 - total flux cleaned = 3.72616 Jy ! Component: 200 - total flux cleaned = 4.05536 Jy ! Total flux subtracted in 200 components = 4.05536 Jy ! Clean residual min=-0.030452 max=0.186805 Jy/beam ! Clean residual mean=-0.000018 rms=0.010485 Jy/beam ! Combined flux in latest and established models = 4.05536 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 4.05536 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6515 mas, bmaj=0.9147 mas, bpa=-0.3959 degrees ! Estimated noise=318.084 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.45629 Jy ! Component: 100 - total flux cleaned = 0.720321 Jy ! Component: 150 - total flux cleaned = 0.882867 Jy ! Component: 200 - total flux cleaned = 0.986339 Jy ! Total flux subtracted in 200 components = 0.986339 Jy ! Clean residual min=-0.011920 max=0.055081 Jy/beam ! Clean residual mean=0.000956 rms=0.005212 Jy/beam ! Combined flux in latest and established models = 5.04169 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 43 components and 5.04169 Jy ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670472 Jy ! Component: 100 - total flux cleaned = 0.110651 Jy ! Component: 150 - total flux cleaned = 0.139462 Jy ! Component: 200 - total flux cleaned = 0.158719 Jy ! Total flux subtracted in 200 components = 0.158719 Jy ! Clean residual min=-0.006700 max=0.011678 Jy/beam ! Clean residual mean=0.000140 rms=0.001366 Jy/beam ! Combined flux in latest and established models = 5.20041 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 5.20041 Jy ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Added new window around map position (-1.8, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117724 Jy ! Component: 100 - total flux cleaned = 0.0154329 Jy ! Component: 150 - total flux cleaned = 0.0187292 Jy ! Component: 200 - total flux cleaned = 0.0217054 Jy ! Total flux subtracted in 200 components = 0.0217054 Jy ! Clean residual min=-0.005825 max=0.006100 Jy/beam ! Clean residual mean=0.000027 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 5.22212 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 61 components and 5.22212 Jy ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Added new window around map position (-2.4, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00272227 Jy ! Component: 100 - total flux cleaned = 0.00489865 Jy ! Component: 150 - total flux cleaned = 0.00605392 Jy ! Component: 200 - total flux cleaned = 0.00688401 Jy ! Total flux subtracted in 200 components = 0.00688401 Jy ! Clean residual min=-0.006675 max=0.005138 Jy/beam ! Clean residual mean=-0.000009 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 5.229 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 66 components and 5.229 Jy ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=2.347 mas, bmaj=2.506 mas, bpa=51.95 degrees ! Estimated noise=454.891 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543424 Jy ! Component: 100 - total flux cleaned = 0.00809476 Jy ! Component: 150 - total flux cleaned = 0.00981397 Jy ! Component: 200 - total flux cleaned = 0.0108709 Jy ! Total flux subtracted in 200 components = 0.0108709 Jy ! Clean residual min=-0.004929 max=0.004220 Jy/beam ! Clean residual mean=-0.000225 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 5.23987 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314168 Jy ! Component: 100 - total flux cleaned = 0.000554177 Jy ! Component: 150 - total flux cleaned = 0.000685517 Jy ! Component: 200 - total flux cleaned = 0.000780016 Jy ! Total flux subtracted in 200 components = 0.000780016 Jy ! Clean residual min=-0.004870 max=0.004221 Jy/beam ! Clean residual mean=-0.000239 rms=0.001429 Jy/beam ! Combined flux in latest and established models = 5.24065 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 89 components and 5.24065 Jy ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! Estimated beam: bmin=0.6515 mas, bmaj=0.9147 mas, bpa=-0.3959 degrees ! Estimated noise=318.084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00275625 Jy ! Component: 100 - total flux cleaned = -0.00275958 Jy ! Component: 150 - total flux cleaned = -0.00251502 Jy ! Component: 200 - total flux cleaned = -0.0022749 Jy ! Total flux subtracted in 200 components = -0.0022749 Jy ! Clean residual min=-0.007010 max=0.004868 Jy/beam ! Clean residual mean=-0.000058 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 5.23838 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 93 components and 5.23838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385789Jy sigma=0.001325 ! Fit after self-cal, rms=0.385231Jy sigma=0.001315 wmodel J0555+3948_X_2000_03_13_pus_map.mod ! Writing 93 model components to file: J0555+3948_X_2000_03_13_pus_map.mod wobs J0555+3948_X_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J0555+3948_X_2000_03_13_pus_uvs.fits wwins J0555+3948_X_2000_03_13_pus_map.win ! wwins: Wrote 8 windows to J0555+3948_X_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014767 Jy ! Component: 100 - total flux cleaned = 0.00148482 Jy ! Component: 150 - total flux cleaned = 0.0011828 Jy ! Component: 200 - total flux cleaned = 0.000802337 Jy ! Component: 250 - total flux cleaned = 0.0002584 Jy ! Component: 300 - total flux cleaned = -9.32816e-05 Jy ! Component: 350 - total flux cleaned = -0.000350518 Jy ! Component: 400 - total flux cleaned = -0.000517136 Jy ! Component: 450 - total flux cleaned = -0.000598957 Jy ! Component: 500 - total flux cleaned = -0.000599379 Jy ! Component: 550 - total flux cleaned = -0.000600288 Jy ! Component: 600 - total flux cleaned = -0.000677357 Jy ! Component: 650 - total flux cleaned = -0.000753527 Jy ! Component: 700 - total flux cleaned = -0.000753232 Jy ! Component: 750 - total flux cleaned = -0.000752761 Jy ! Component: 800 - total flux cleaned = -0.000752946 Jy ! Component: 850 - total flux cleaned = -0.000753209 Jy ! Component: 900 - total flux cleaned = -0.000825214 Jy ! Component: 950 - total flux cleaned = -0.000752841 Jy ! Component: 1000 - total flux cleaned = -0.000752698 Jy ! Component: 1050 - total flux cleaned = -0.000681713 Jy ! Component: 1100 - total flux cleaned = -0.000542514 Jy ! Component: 1150 - total flux cleaned = -0.00054285 Jy ! Component: 1200 - total flux cleaned = -0.000404988 Jy ! Component: 1250 - total flux cleaned = -0.000132573 Jy ! Component: 1300 - total flux cleaned = -6.4319e-05 Jy ! Component: 1350 - total flux cleaned = 0.000136627 Jy ! Component: 1400 - total flux cleaned = 0.000269863 Jy ! Component: 1450 - total flux cleaned = 0.0004021 Jy ! Component: 1500 - total flux cleaned = 0.000467428 Jy ! Component: 1550 - total flux cleaned = 0.000728608 Jy ! Component: 1600 - total flux cleaned = 0.000792477 Jy ! Component: 1650 - total flux cleaned = 0.000792509 Jy ! Component: 1700 - total flux cleaned = 0.000792138 Jy ! Component: 1750 - total flux cleaned = 0.000919253 Jy ! Component: 1800 - total flux cleaned = 0.000918694 Jy ! Component: 1850 - total flux cleaned = 0.000918468 Jy ! Component: 1900 - total flux cleaned = 0.00110632 Jy ! Component: 1950 - total flux cleaned = 0.00110669 Jy ! Component: 2000 - total flux cleaned = 0.00116827 Jy ! Total flux subtracted in 2048 components = 0.00122952 Jy ! Clean residual min=-0.003083 max=0.003141 Jy/beam ! Clean residual mean=-0.000064 rms=0.000926 Jy/beam ! Combined flux in latest and established models = 5.23961 Jy keep ! Adding 82 model components to the UV plane model. ! The established model now contains 156 components and 5.23961 Jy ![Exited script file: muppet] wmap "J0555+3948_X_2000_03_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6515 x 0.9147 at -0.3959 degrees (North through East) ! Clean map min=-0.0035889 max=3.4629 Jy/beam ! Writing clean map to FITS file: J0555+3948_X_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 3.46291 invert ! Inverting map ! Your choice of large map pixels excluded 4.1% of the data. ! The x-axis pixel size should ideally be below 0.1607 milli-arcsec ! The y-axis pixel size should ideally be below 0.1521 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000926107 device "J0555+3948_X_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J0555+3948_X_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0802309 0.0802309 0.160462 0.320924 0.641847 1.28369 2.56739 5.13478 10.2696 20.5391 41.0782 82.1564 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0027 print "peak=",int(1000*peak_flux)/1000 ! peak= 3.462 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6515 x 0.9147 at -0.3959 degrees (North through East) ! Clean map min=-0.0035889 max=3.4629 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0555+3948_X_2000_03_13_pus_uvs.log closed on Wed Apr 3 15:56:18 2013