! Started logfile: J0433+0521_X_2000_03_13_pus_uvs.log on Mon Apr 1 13:25:36 2013 obs J0433+0521_X_2000_03_13_pus_uva.fits ! Reading UV FITS file: J0433+0521_X_2000_03_13_pus_uva.fits ! AN table 1: 90 integrations on 190 of 190 possible baselines. ! AN table 2: 47 integrations on 190 of 190 possible baselines. ! AN table 3: 16 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.179051 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0433+0521 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2382 lines of history. ! ! Reading 20820 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0433+0521_X_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1155 telescope corrections were flagged in sub-array 1. ! A total of 499 telescope corrections were flagged in sub-array 2. ! A total of 273 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 1155 telescope corrections were flagged in sub-array 1. ! A total of 499 telescope corrections were flagged in sub-array 2. ! A total of 273 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 1155 telescope corrections were flagged in sub-array 1. ! A total of 499 telescope corrections were flagged in sub-array 2. ! A total of 273 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 1155 telescope corrections were flagged in sub-array 1. ! A total of 499 telescope corrections were flagged in sub-array 2. ! A total of 273 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.419703Jy sigma=0.014736 ! Fit after self-cal, rms=0.933578Jy sigma=0.009706 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5091 mas, bmaj=1.591 mas, bpa=-6.804 degrees ! Estimated noise=961.188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.705056 Jy ! Component: 100 - total flux cleaned = 1.05325 Jy ! Total flux subtracted in 100 components = 1.05325 Jy ! Clean residual min=-0.083508 max=0.277257 Jy/beam ! Clean residual mean=-0.001364 rms=0.030606 Jy/beam ! Combined flux in latest and established models = 1.05325 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.05325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.789843Jy sigma=0.008503 ! Fit after self-cal, rms=0.789230Jy sigma=0.008494 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-0.8, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.26177 Jy ! Component: 100 - total flux cleaned = 0.421546 Jy ! Total flux subtracted in 100 components = 0.421546 Jy ! Clean residual min=-0.076351 max=0.227277 Jy/beam ! Clean residual mean=-0.001039 rms=0.024471 Jy/beam ! Combined flux in latest and established models = 1.4748 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 24 components and 1.4748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.640504Jy sigma=0.006703 ! Fit after self-cal, rms=0.630357Jy sigma=0.006645 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-2.6, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.217112 Jy ! Component: 100 - total flux cleaned = 0.355257 Jy ! Total flux subtracted in 100 components = 0.355257 Jy ! Clean residual min=-0.057843 max=0.152115 Jy/beam ! Clean residual mean=-0.000760 rms=0.018360 Jy/beam ! Combined flux in latest and established models = 1.83005 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 1.83005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.502851Jy sigma=0.005187 ! Fit after self-cal, rms=0.481263Jy sigma=0.005069 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-3.4, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138365 Jy ! Component: 100 - total flux cleaned = 0.239891 Jy ! Total flux subtracted in 100 components = 0.239891 Jy ! Clean residual min=-0.045237 max=0.111061 Jy/beam ! Clean residual mean=-0.000575 rms=0.014347 Jy/beam ! Combined flux in latest and established models = 2.06994 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 53 components and 2.06994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.409138Jy sigma=0.004171 ! Fit after self-cal, rms=0.400010Jy sigma=0.004125 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-5.4, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104351 Jy ! Component: 100 - total flux cleaned = 0.18518 Jy ! Total flux subtracted in 100 components = 0.18518 Jy ! Clean residual min=-0.035282 max=0.089103 Jy/beam ! Clean residual mean=-0.000465 rms=0.011722 Jy/beam ! Combined flux in latest and established models = 2.25512 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 75 components and 2.25512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.349181Jy sigma=0.003498 ! Fit after self-cal, rms=0.342878Jy sigma=0.003467 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (1, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0842262 Jy ! Component: 100 - total flux cleaned = 0.154015 Jy ! Total flux subtracted in 100 components = 0.154015 Jy ! Clean residual min=-0.028226 max=0.067361 Jy/beam ! Clean residual mean=-0.000358 rms=0.009619 Jy/beam ! Combined flux in latest and established models = 2.40914 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 98 components and 2.40914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304602Jy sigma=0.002962 ! Fit after self-cal, rms=0.303524Jy sigma=0.002957 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-1.6, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.070365 Jy ! Component: 100 - total flux cleaned = 0.127978 Jy ! Total flux subtracted in 100 components = 0.127978 Jy ! Clean residual min=-0.024380 max=0.046920 Jy/beam ! Clean residual mean=-0.000271 rms=0.008093 Jy/beam ! Combined flux in latest and established models = 2.53712 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 118 components and 2.53712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274775Jy sigma=0.002563 ! Fit after self-cal, rms=0.273800Jy sigma=0.002560 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-4.4, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0558901 Jy ! Component: 100 - total flux cleaned = 0.102281 Jy ! Total flux subtracted in 100 components = 0.102281 Jy ! Clean residual min=-0.021297 max=0.037350 Jy/beam ! Clean residual mean=-0.000211 rms=0.006881 Jy/beam ! Combined flux in latest and established models = 2.6394 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 133 components and 2.6394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254313Jy sigma=0.002272 ! Fit after self-cal, rms=0.253042Jy sigma=0.002266 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5718 mas, bmaj=1.897 mas, bpa=-5.254 degrees ! Estimated noise=576.115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.083062 Jy ! Component: 100 - total flux cleaned = 0.144469 Jy ! Component: 150 - total flux cleaned = 0.191971 Jy ! Component: 200 - total flux cleaned = 0.229384 Jy ! Total flux subtracted in 200 components = 0.229384 Jy ! Clean residual min=-0.026061 max=0.036030 Jy/beam ! Clean residual mean=-0.000161 rms=0.008568 Jy/beam ! Combined flux in latest and established models = 2.86878 Jy ! Performing phase self-cal ! Adding 70 model components to the UV plane model. ! The established model now contains 176 components and 2.86878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225981Jy sigma=0.001790 ! Fit after self-cal, rms=0.223267Jy sigma=0.001770 ! Inverting map ! Your choice of large map pixels excluded 5.26% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.91 GC 1.00* KP 1.04 ! LA 1.03 NL 1.03 OV 0.98 PT 0.97 ! SC 1.00 WF 1.07 HH 1.00* KK 1.00* ! MA 1.04 MC 1.06 MK 1.00* NY 0.99 ! ON 1.07 TS 1.00* WZ 0.98 HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 GC 0.97 KP 1.01 ! LA 0.97 NL 0.99 OV 1.01 PT 0.98 ! SC 1.00* WF 1.20 HH 1.00* KK 0.99 ! MA 1.00* MC 1.00* MK 0.98 NY 1.00* ! ON 1.00* TS 1.01 WZ 1.00* HN 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.13 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 0.89 ! MA 1.00* MC 1.00* MK 0.92 NY 1.00* ! ON 1.00* TS 1.17 WZ 1.00* HN 1.00* ! ! ! Correcting IF 2. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 GC 1.00* KP 1.02 ! LA 0.99 NL 1.06 OV 0.98 PT 0.93 ! SC 0.90 WF 1.02 HH 1.00* KK 1.00* ! MA 1.05 MC 1.07 MK 1.00* NY 1.02 ! ON 1.07 TS 1.00* WZ 0.99 HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 GC 0.98 KP 0.98 ! LA 0.93 NL 1.02 OV 0.99 PT 0.94 ! SC 1.00* WF 1.24 HH 1.00* KK 1.02 ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.05 WZ 1.00* HN 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.11 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 0.92 ! MA 1.00* MC 1.00* MK 0.94 NY 1.00* ! ON 1.00* TS 1.22 WZ 1.00* HN 1.00* ! ! ! Correcting IF 3. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 GC 1.00* KP 1.03 ! LA 0.99 NL 0.99 OV 0.99 PT 0.97 ! SC 0.94 WF 1.02 HH 1.00* KK 1.00* ! MA 1.05 MC 1.09 MK 1.00* NY 1.09 ! ON 1.07 TS 1.00* WZ 1.01 HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 GC 1.00 KP 0.99 ! LA 0.93 NL 0.99 OV 1.00 PT 0.97 ! SC 1.00* WF 1.25 HH 1.00* KK 1.01 ! MA 1.00* MC 1.00* MK 0.94 NY 1.00* ! ON 1.00* TS 1.12 WZ 1.00* HN 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.17 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 0.90 ! MA 1.00* MC 1.00* MK 0.92 NY 1.00* ! ON 1.00* TS 1.73 WZ 1.00* HN 1.00* ! ! ! Correcting IF 4. ! A total of 27 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 GC 1.00* KP 1.02 ! LA 1.02 NL 1.01 OV 1.00 PT 0.98 ! SC 1.03 WF 1.10 HH 1.00* KK 1.00* ! MA 1.02 MC 1.11 MK 1.00* NY 1.07 ! ON 1.08 TS 1.00* WZ 1.03 HN 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.97 GC 0.99 KP 0.99 ! LA 0.94 NL 1.00 OV 1.00 PT 0.99 ! SC 1.00* WF 1.25 HH 1.00* KK 1.05 ! MA 1.00* MC 1.00* MK 0.95 NY 1.00* ! ON 1.00* TS 1.15 WZ 1.00* HN 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00* FD 1.00* GC 1.08 KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.00* KK 0.93 ! MA 1.00* MC 1.00* MK 0.94 NY 1.00* ! ON 1.00* TS 1.66 WZ 1.00* HN 1.00* ! ! ! Fit before self-cal, rms=0.223267Jy sigma=0.001770 ! Fit after self-cal, rms=0.203975Jy sigma=0.001421 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5793 mas, bmaj=1.902 mas, bpa=-5.298 degrees ! Estimated noise=579.441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272777 Jy ! Component: 100 - total flux cleaned = 0.0323326 Jy ! Component: 150 - total flux cleaned = 0.0333051 Jy ! Component: 200 - total flux cleaned = 0.0345942 Jy ! Total flux subtracted in 200 components = 0.0345942 Jy ! Clean residual min=-0.012382 max=0.020298 Jy/beam ! Clean residual mean=-0.000036 rms=0.003941 Jy/beam ! Combined flux in latest and established models = 2.90337 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 209 components and 2.90338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200593Jy sigma=0.001361 ! Fit after self-cal, rms=0.199714Jy sigma=0.001354 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-11.8, -1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192387 Jy ! Component: 100 - total flux cleaned = 0.030789 Jy ! Component: 150 - total flux cleaned = 0.0357694 Jy ! Component: 200 - total flux cleaned = 0.0379593 Jy ! Total flux subtracted in 200 components = 0.0379593 Jy ! Clean residual min=-0.011959 max=0.011909 Jy/beam ! Clean residual mean=-0.000024 rms=0.003150 Jy/beam ! Combined flux in latest and established models = 2.94133 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 233 components and 2.94133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197906Jy sigma=0.001319 ! Fit after self-cal, rms=0.197475Jy sigma=0.001317 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197475Jy sigma=0.001317 ! Fit after self-cal, rms=0.195322Jy sigma=0.001310 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.58 mas, bmaj=1.901 mas, bpa=-5.31 degrees ! Estimated noise=577.648 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00847771 Jy ! Component: 100 - total flux cleaned = 0.0138355 Jy ! Component: 150 - total flux cleaned = 0.0171383 Jy ! Component: 200 - total flux cleaned = 0.0194891 Jy ! Total flux subtracted in 200 components = 0.0194891 Jy ! Clean residual min=-0.009169 max=0.009935 Jy/beam ! Clean residual mean=0.000001 rms=0.002599 Jy/beam ! Combined flux in latest and established models = 2.96082 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 246 components and 2.96082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194394Jy sigma=0.001294 ! Fit after self-cal, rms=0.194064Jy sigma=0.001292 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00445883 Jy ! Component: 100 - total flux cleaned = 0.00701059 Jy ! Component: 150 - total flux cleaned = 0.00828963 Jy ! Component: 200 - total flux cleaned = 0.00948019 Jy ! Total flux subtracted in 200 components = 0.00948019 Jy ! Clean residual min=-0.009294 max=0.009043 Jy/beam ! Clean residual mean=0.000003 rms=0.002380 Jy/beam ! Combined flux in latest and established models = 2.9703 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 256 components and 2.9703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193482Jy sigma=0.001283 ! Fit after self-cal, rms=0.193282Jy sigma=0.001283 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193282Jy sigma=0.001283 ! Fit after self-cal, rms=0.192130Jy sigma=0.001281 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5809 mas, bmaj=1.901 mas, bpa=-5.327 degrees ! Estimated noise=576.975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004564 Jy ! Component: 100 - total flux cleaned = 0.00668158 Jy ! Component: 150 - total flux cleaned = 0.00761063 Jy ! Component: 200 - total flux cleaned = 0.00825922 Jy ! Total flux subtracted in 200 components = 0.00825922 Jy ! Clean residual min=-0.008211 max=0.007969 Jy/beam ! Clean residual mean=0.000012 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 2.97856 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 263 components and 2.97856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191622Jy sigma=0.001274 ! Fit after self-cal, rms=0.191432Jy sigma=0.001273 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350005 Jy ! Component: 100 - total flux cleaned = 0.00455185 Jy ! Component: 150 - total flux cleaned = 0.00532047 Jy ! Component: 200 - total flux cleaned = 0.0056847 Jy ! Total flux subtracted in 200 components = 0.0056847 Jy ! Clean residual min=-0.008224 max=0.007369 Jy/beam ! Clean residual mean=0.000014 rms=0.002008 Jy/beam ! Combined flux in latest and established models = 2.98425 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 267 components and 2.98425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191073Jy sigma=0.001269 ! Fit after self-cal, rms=0.190957Jy sigma=0.001268 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190957Jy sigma=0.001268 ! Fit after self-cal, rms=0.190190Jy sigma=0.001267 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=2.82 mas, bmaj=3.491 mas, bpa=18.41 degrees ! Estimated noise=732.819 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0115919 Jy ! Component: 100 - total flux cleaned = 0.0161613 Jy ! Component: 150 - total flux cleaned = 0.0181085 Jy ! Component: 200 - total flux cleaned = 0.0190198 Jy ! Total flux subtracted in 200 components = 0.0190198 Jy ! Clean residual min=-0.008664 max=0.008947 Jy/beam ! Clean residual mean=0.000051 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 3.00327 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 280 components and 3.00327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190216Jy sigma=0.001265 ! Fit after self-cal, rms=0.190017Jy sigma=0.001264 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276831 Jy ! Component: 100 - total flux cleaned = 0.00388695 Jy ! Component: 150 - total flux cleaned = 0.00434241 Jy ! Component: 200 - total flux cleaned = 0.00420239 Jy ! Total flux subtracted in 200 components = 0.00420239 Jy ! Clean residual min=-0.008188 max=0.008586 Jy/beam ! Clean residual mean=0.000049 rms=0.002524 Jy/beam ! Combined flux in latest and established models = 3.00747 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 288 components and 3.00747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190071Jy sigma=0.001264 ! Fit after self-cal, rms=0.189951Jy sigma=0.001264 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5816 mas, bmaj=1.902 mas, bpa=-5.343 degrees ! Estimated noise=576.566 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5816 x 1.902 at -5.343 degrees (North through East) ! Clean map min=-0.0085124 max=0.77821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189951Jy sigma=0.001264 ! Fit after self-cal, rms=0.180822Jy sigma=0.001174 ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5829 mas, bmaj=1.904 mas, bpa=-5.365 degrees ! Estimated noise=577.794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153619 Jy ! Component: 100 - total flux cleaned = 0.00190412 Jy ! Component: 150 - total flux cleaned = 0.00208087 Jy ! Component: 200 - total flux cleaned = 0.00223507 Jy ! Total flux subtracted in 200 components = 0.00223507 Jy ! Clean residual min=-0.006678 max=0.006004 Jy/beam ! Clean residual mean=0.000025 rms=0.001550 Jy/beam ! Combined flux in latest and established models = 3.00971 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 302 components and 3.00971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180495Jy sigma=0.001170 ! Fit after self-cal, rms=0.180435Jy sigma=0.001170 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973565 Jy ! Component: 100 - total flux cleaned = 0.000970107 Jy ! Component: 150 - total flux cleaned = 0.00111296 Jy ! Component: 200 - total flux cleaned = 0.00137575 Jy ! Total flux subtracted in 200 components = 0.00137575 Jy ! Clean residual min=-0.006340 max=0.005835 Jy/beam ! Clean residual mean=0.000026 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 3.01108 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 306 components and 3.01108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180235Jy sigma=0.001168 ! Fit after self-cal, rms=0.180188Jy sigma=0.001168 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180188Jy sigma=0.001168 ! Fit after self-cal, rms=0.179946Jy sigma=0.001168 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5166 mas, bmaj=1.591 mas, bpa=-7.107 degrees ! Estimated noise=985.486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.709574 Jy ! Component: 100 - total flux cleaned = 1.10355 Jy ! Component: 150 - total flux cleaned = 1.38694 Jy ! Component: 200 - total flux cleaned = 1.60292 Jy ! Total flux subtracted in 200 components = 1.60292 Jy ! Clean residual min=-0.051964 max=0.125648 Jy/beam ! Clean residual mean=-0.000821 rms=0.019949 Jy/beam ! Combined flux in latest and established models = 1.60292 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.60292 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5827 mas, bmaj=1.905 mas, bpa=-5.36 degrees ! Estimated noise=577.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.339698 Jy ! Component: 100 - total flux cleaned = 0.575672 Jy ! Component: 150 - total flux cleaned = 0.748779 Jy ! Component: 200 - total flux cleaned = 0.877544 Jy ! Total flux subtracted in 200 components = 0.877544 Jy ! Clean residual min=-0.036067 max=0.077713 Jy/beam ! Clean residual mean=-0.000537 rms=0.014876 Jy/beam ! Combined flux in latest and established models = 2.48046 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 81 components and 2.48046 Jy ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-6.2, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0979184 Jy ! Component: 100 - total flux cleaned = 0.172628 Jy ! Component: 150 - total flux cleaned = 0.231051 Jy ! Component: 200 - total flux cleaned = 0.277637 Jy ! Total flux subtracted in 200 components = 0.277637 Jy ! Clean residual min=-0.017661 max=0.028747 Jy/beam ! Clean residual mean=-0.000192 rms=0.006505 Jy/beam ! Combined flux in latest and established models = 2.7581 Jy ! Adding 91 model components to the UV plane model. ! The established model now contains 148 components and 2.7581 Jy ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Added new window around map position (-9, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380998 Jy ! Component: 100 - total flux cleaned = 0.0694182 Jy ! Component: 150 - total flux cleaned = 0.0956773 Jy ! Component: 200 - total flux cleaned = 0.118125 Jy ! Total flux subtracted in 200 components = 0.118125 Jy ! Clean residual min=-0.010936 max=0.013878 Jy/beam ! Clean residual mean=-0.000083 rms=0.003649 Jy/beam ! Combined flux in latest and established models = 2.87622 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 202 components and 2.87622 Jy ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=2.819 mas, bmaj=3.488 mas, bpa=18.2 degrees ! Estimated noise=731.705 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0366804 Jy ! Component: 100 - total flux cleaned = 0.0625633 Jy ! Component: 150 - total flux cleaned = 0.081539 Jy ! Component: 200 - total flux cleaned = 0.0957788 Jy ! Total flux subtracted in 200 components = 0.0957788 Jy ! Clean residual min=-0.010059 max=0.009427 Jy/beam ! Clean residual mean=-0.000014 rms=0.003060 Jy/beam ! Combined flux in latest and established models = 2.972 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108895 Jy ! Component: 100 - total flux cleaned = 0.0193666 Jy ! Component: 150 - total flux cleaned = 0.0245623 Jy ! Component: 200 - total flux cleaned = 0.0275874 Jy ! Total flux subtracted in 200 components = 0.0275874 Jy ! Clean residual min=-0.008244 max=0.008133 Jy/beam ! Clean residual mean=0.000031 rms=0.002263 Jy/beam ! Combined flux in latest and established models = 2.99959 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 263 components and 2.99959 Jy ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! Estimated beam: bmin=0.5827 mas, bmaj=1.905 mas, bpa=-5.36 degrees ! Estimated noise=577.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145359 Jy ! Component: 100 - total flux cleaned = 0.00290186 Jy ! Component: 150 - total flux cleaned = 0.003992 Jy ! Component: 200 - total flux cleaned = 0.0053957 Jy ! Total flux subtracted in 200 components = 0.0053957 Jy ! Clean residual min=-0.007063 max=0.005731 Jy/beam ! Clean residual mean=0.000015 rms=0.001504 Jy/beam ! Combined flux in latest and established models = 3.00499 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 287 components and 3.00499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180214Jy sigma=0.001171 ! Fit after self-cal, rms=0.179781Jy sigma=0.001168 wmodel J0433+0521_X_2000_03_13_pus_map.mod ! Writing 287 model components to file: J0433+0521_X_2000_03_13_pus_map.mod wobs J0433+0521_X_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J0433+0521_X_2000_03_13_pus_uvs.fits wwins J0433+0521_X_2000_03_13_pus_map.win ! wwins: Wrote 12 windows to J0433+0521_X_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0030518 Jy ! Component: 100 - total flux cleaned = -0.00537399 Jy ! Component: 150 - total flux cleaned = -0.00630817 Jy ! Component: 200 - total flux cleaned = -0.00674964 Jy ! Component: 250 - total flux cleaned = -0.00700286 Jy ! Component: 300 - total flux cleaned = -0.00741281 Jy ! Component: 350 - total flux cleaned = -0.00773038 Jy ! Component: 400 - total flux cleaned = -0.00811844 Jy ! Component: 450 - total flux cleaned = -0.00842141 Jy ! Component: 500 - total flux cleaned = -0.00849499 Jy ! Component: 550 - total flux cleaned = -0.00878681 Jy ! Component: 600 - total flux cleaned = -0.00885879 Jy ! Component: 650 - total flux cleaned = -0.00892942 Jy ! Component: 700 - total flux cleaned = -0.00872259 Jy ! Component: 750 - total flux cleaned = -0.00885977 Jy ! Component: 800 - total flux cleaned = -0.00892714 Jy ! Component: 850 - total flux cleaned = -0.00892718 Jy ! Component: 900 - total flux cleaned = -0.00932171 Jy ! Component: 950 - total flux cleaned = -0.0093212 Jy ! Component: 1000 - total flux cleaned = -0.0094505 Jy ! Component: 1050 - total flux cleaned = -0.00957747 Jy ! Component: 1100 - total flux cleaned = -0.00995311 Jy ! Component: 1150 - total flux cleaned = -0.00995308 Jy ! Component: 1200 - total flux cleaned = -0.0101382 Jy ! Component: 1250 - total flux cleaned = -0.0106855 Jy ! Component: 1300 - total flux cleaned = -0.0110454 Jy ! Component: 1350 - total flux cleaned = -0.0113424 Jy ! Component: 1400 - total flux cleaned = -0.0115772 Jy ! Component: 1450 - total flux cleaned = -0.0119259 Jy ! Component: 1500 - total flux cleaned = -0.0119832 Jy ! Component: 1550 - total flux cleaned = -0.012381 Jy ! Component: 1600 - total flux cleaned = -0.012493 Jy ! Component: 1650 - total flux cleaned = -0.0126043 Jy ! Component: 1700 - total flux cleaned = -0.0126604 Jy ! Component: 1750 - total flux cleaned = -0.0128249 Jy ! Component: 1800 - total flux cleaned = -0.012825 Jy ! Component: 1850 - total flux cleaned = -0.0127714 Jy ! Component: 1900 - total flux cleaned = -0.0128257 Jy ! Component: 1950 - total flux cleaned = -0.0130386 Jy ! Component: 2000 - total flux cleaned = -0.0131444 Jy ! Total flux subtracted in 2048 components = -0.0130399 Jy ! Clean residual min=-0.002604 max=0.003161 Jy/beam ! Clean residual mean=0.000012 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 2.99195 Jy keep ! Adding 165 model components to the UV plane model. ! The established model now contains 447 components and 2.99195 Jy ![Exited script file: muppet] wmap "J0433+0521_X_2000_03_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5827 x 1.905 at -5.36 degrees (North through East) ! Clean map min=-0.0057254 max=0.76003 Jy/beam ! Writing clean map to FITS file: J0433+0521_X_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.760025 invert ! Inverting map ! Your choice of large map pixels excluded 5.31% of the data. ! The x-axis pixel size should ideally be below 0.1854 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000982361 device "J0433+0521_X_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J0433+0521_X_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.387761 0.387761 0.775523 1.55105 3.10209 6.20418 12.4084 24.8167 49.6334 99.2669 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.76 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5827 x 1.905 at -5.36 degrees (North through East) ! Clean map min=-0.0057254 max=0.76003 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0433+0521_X_2000_03_13_pus_uvs.log closed on Mon Apr 1 13:25:47 2013