! Started logfile: J0339-0146_X_2000_03_13_pus_uvs.log on Wed Apr 3 15:43:30 2013 obs J0339-0146_X_2000_03_13_pus_uva.fits ! Reading UV FITS file: J0339-0146_X_2000_03_13_pus_uva.fits ! AN table 1: 115 integrations on 190 of 190 possible baselines. ! AN table 2: 89 integrations on 190 of 190 possible baselines. ! AN table 3: 115 integrations on 190 of 190 possible baselines. ! AN table 4: 232 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.0727386 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2386 lines of history. ! ! Reading 30460 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0339-0146_X_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1929 telescope corrections were flagged in sub-array 1. ! A total of 1324 telescope corrections were flagged in sub-array 2. ! A total of 1590 telescope corrections were flagged in sub-array 3. ! A total of 3941 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1928 telescope corrections were flagged in sub-array 1. ! A total of 1322 telescope corrections were flagged in sub-array 2. ! A total of 1584 telescope corrections were flagged in sub-array 3. ! A total of 3940 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1929 telescope corrections were flagged in sub-array 1. ! A total of 1326 telescope corrections were flagged in sub-array 2. ! A total of 1593 telescope corrections were flagged in sub-array 3. ! A total of 3942 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1930 telescope corrections were flagged in sub-array 1. ! A total of 1330 telescope corrections were flagged in sub-array 2. ! A total of 1590 telescope corrections were flagged in sub-array 3. ! A total of 3940 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.914806Jy sigma=0.007961 ! Fit after self-cal, rms=0.488667Jy sigma=0.004305 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.5424 mas, bmaj=1.271 mas, bpa=-3.194 degrees ! Estimated noise=966.756 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.781369 Jy ! Component: 100 - total flux cleaned = 1.08742 Jy ! Total flux subtracted in 100 components = 1.08742 Jy ! Clean residual min=-0.032321 max=0.140404 Jy/beam ! Clean residual mean=0.000065 rms=0.009527 Jy/beam ! Combined flux in latest and established models = 1.08742 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.08742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.376400Jy sigma=0.003354 ! Fit after self-cal, rms=0.374947Jy sigma=0.003352 ! Inverting map ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.15342 Jy ! Component: 100 - total flux cleaned = 0.234959 Jy ! Total flux subtracted in 100 components = 0.234959 Jy ! Clean residual min=-0.019560 max=0.063267 Jy/beam ! Clean residual mean=0.000038 rms=0.005373 Jy/beam ! Combined flux in latest and established models = 1.32238 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 17 components and 1.32238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272577Jy sigma=0.002153 ! Fit after self-cal, rms=0.271601Jy sigma=0.002150 ! Inverting map ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (1.4, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0629386 Jy ! Component: 100 - total flux cleaned = 0.103954 Jy ! Total flux subtracted in 100 components = 0.103954 Jy ! Clean residual min=-0.015902 max=0.036300 Jy/beam ! Clean residual mean=0.000025 rms=0.004156 Jy/beam ! Combined flux in latest and established models = 1.42633 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 1.42633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.245804Jy sigma=0.001787 ! Fit after self-cal, rms=0.243895Jy sigma=0.001771 ! Inverting map ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (2.6, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0387188 Jy ! Component: 100 - total flux cleaned = 0.0673453 Jy ! Total flux subtracted in 100 components = 0.0673453 Jy ! Clean residual min=-0.013141 max=0.026065 Jy/beam ! Clean residual mean=0.000016 rms=0.003389 Jy/beam ! Combined flux in latest and established models = 1.49368 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 42 components and 1.49368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.232725Jy sigma=0.001590 ! Fit after self-cal, rms=0.231827Jy sigma=0.001583 ! Inverting map ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (-1, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276576 Jy ! Component: 100 - total flux cleaned = 0.0494993 Jy ! Total flux subtracted in 100 components = 0.0494993 Jy ! Clean residual min=-0.010623 max=0.015276 Jy/beam ! Clean residual mean=0.000010 rms=0.002926 Jy/beam ! Combined flux in latest and established models = 1.54318 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 55 components and 1.54318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225902Jy sigma=0.001478 ! Fit after self-cal, rms=0.225721Jy sigma=0.001477 ! Inverting map ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7091 mas, bmaj=1.815 mas, bpa=-2.582 degrees ! Estimated noise=531.616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0380371 Jy ! Component: 100 - total flux cleaned = 0.0633137 Jy ! Component: 150 - total flux cleaned = 0.0810775 Jy ! Component: 200 - total flux cleaned = 0.0937986 Jy ! Total flux subtracted in 200 components = 0.0937986 Jy ! Clean residual min=-0.011369 max=0.014468 Jy/beam ! Clean residual mean=0.000033 rms=0.003725 Jy/beam ! Combined flux in latest and established models = 1.63698 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 100 components and 1.63698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.220512Jy sigma=0.001361 ! Fit after self-cal, rms=0.219991Jy sigma=0.001356 ! Inverting map ! Your choice of large map pixels excluded 2.28% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 GC 1.00* KP 1.03 ! LA 1.05 NL 1.01 OV 1.01 PT 1.01 ! SC 1.00 WF 1.03 HH 1.05 KK 1.00* ! MA 1.03 MC 1.06 MK 1.00* NY 1.00* ! ON 1.08 TS 1.00* WZ 0.95 HN 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.97 GC 1.03 KP 1.02 ! LA 1.01 NL 1.04 OV 0.99 PT 1.00 ! SC 0.95 WF 1.10 HH 1.00* KK 0.99 ! MA 0.95 MC 0.98 MK 0.98 NY 1.10 ! ON 1.04 TS 1.02 WZ 0.95 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.95 GC 1.00 KP 1.01 ! LA 0.99 NL 0.98 OV 0.98 PT 0.99 ! SC 1.00 WF 1.05 HH 1.00* KK 1.10 ! MA 1.00* MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.23 ! ! A total of 336 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 0.70 KK 1.00* ! MA 0.97 MC 1.05 MK 1.00* NY 1.09 ! ON 1.04 TS 0.96 WZ 1.01 HN 1.00* ! ! ! Correcting IF 2. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.95 GC 1.00* KP 1.01 ! LA 1.00 NL 1.05 OV 1.00 PT 0.97 ! SC 0.98 WF 1.05 HH 0.97 KK 1.00* ! MA 0.97 MC 1.10 MK 1.00* NY 1.00* ! ON 1.07 TS 1.00* WZ 0.96 HN 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.96 GC 1.01 KP 0.98 ! LA 0.98 NL 1.07 OV 0.98 PT 0.96 ! SC 1.03 WF 1.10 HH 1.00* KK 0.99 ! MA 0.95 MC 0.99 MK 1.03 NY 1.12 ! ON 1.02 TS 1.04 WZ 0.96 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.95 GC 0.99 KP 0.98 ! LA 0.95 NL 1.01 OV 0.96 PT 0.95 ! SC 0.99 WF 1.06 HH 1.00* KK 1.10 ! MA 1.00* MC 1.00* MK 1.02 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.04 ! ! A total of 336 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 0.83 KK 1.00* ! MA 0.97 MC 1.08 MK 1.00* NY 1.06 ! ON 1.04 TS 0.94 WZ 1.04 HN 1.00* ! ! ! Correcting IF 3. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 GC 1.00* KP 1.03 ! LA 1.00 NL 1.00 OV 1.02 PT 0.99 ! SC 1.02 WF 1.05 HH 0.97 KK 1.00* ! MA 0.88 MC 1.11 MK 1.00* NY 1.00* ! ON 1.13 TS 1.00* WZ 0.97 HN 1.00* ! ! A total of 21 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.00 GC 1.03 KP 1.01 ! LA 0.98 NL 1.02 OV 0.98 PT 1.00 ! SC 1.12 WF 1.06 HH 1.00* KK 0.97 ! MA 0.94 MC 0.96 MK 0.99 NY 1.16 ! ON 1.02 TS 1.05 WZ 1.02 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 0.98 GC 1.02 KP 0.99 ! LA 0.94 NL 0.97 OV 0.97 PT 0.99 ! SC 1.02 WF 1.05 HH 1.00* KK 1.09 ! MA 1.00* MC 1.00* MK 0.98 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.17 ! ! A total of 333 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 0.75 KK 1.00* ! MA 0.98 MC 1.06 MK 1.00* NY 1.08 ! ON 1.01 TS 0.99 WZ 1.05 HN 1.00* ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 GC 1.00* KP 1.02 ! LA 1.02 NL 1.00 OV 1.03 PT 1.01 ! SC 1.05 WF 1.06 HH 1.00 KK 1.00* ! MA 0.97 MC 1.11 MK 1.00* NY 1.00* ! ON 1.02 TS 1.00* WZ 1.04 HN 1.00* ! ! A total of 27 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 GC 1.03 KP 0.99 ! LA 0.99 NL 1.03 OV 0.98 PT 1.01 ! SC 0.97 WF 1.05 HH 1.00* KK 1.00 ! MA 0.94 MC 0.98 MK 1.03 NY 1.17 ! ON 1.04 TS 1.04 WZ 1.01 HN 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.96 GC 1.02 KP 0.98 ! LA 0.96 NL 0.98 OV 0.98 PT 1.00 ! SC 1.08 WF 1.07 HH 1.00* KK 1.10 ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.15 ! ! A total of 336 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.20 KK 1.00* ! MA 0.94 MC 1.06 MK 1.00* NY 1.08 ! ON 1.01 TS 0.99 WZ 1.05 HN 1.00* ! ! ! Fit before self-cal, rms=0.219991Jy sigma=0.001356 ! Fit after self-cal, rms=0.210477Jy sigma=0.001247 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7106 mas, bmaj=1.804 mas, bpa=-2.752 degrees ! Estimated noise=536.513 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233473 Jy ! Component: 100 - total flux cleaned = 0.00149153 Jy ! Component: 150 - total flux cleaned = 0.00105787 Jy ! Component: 200 - total flux cleaned = 0.000497886 Jy ! Total flux subtracted in 200 components = 0.000497886 Jy ! Clean residual min=-0.005857 max=0.006137 Jy/beam ! Clean residual mean=-0.000020 rms=0.001462 Jy/beam ! Combined flux in latest and established models = 1.63748 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 120 components and 1.63748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209914Jy sigma=0.001238 ! Fit after self-cal, rms=0.209907Jy sigma=0.001237 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (3.6, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0048914 Jy ! Component: 100 - total flux cleaned = 0.00509422 Jy ! Component: 150 - total flux cleaned = 0.00476923 Jy ! Component: 200 - total flux cleaned = 0.00462876 Jy ! Total flux subtracted in 200 components = 0.00462876 Jy ! Clean residual min=-0.005646 max=0.005141 Jy/beam ! Clean residual mean=-0.000024 rms=0.001354 Jy/beam ! Combined flux in latest and established models = 1.64211 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 137 components and 1.64211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209578Jy sigma=0.001232 ! Fit after self-cal, rms=0.209495Jy sigma=0.001231 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209495Jy sigma=0.001231 ! Fit after self-cal, rms=0.207959Jy sigma=0.001213 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7112 mas, bmaj=1.805 mas, bpa=-2.732 degrees ! Estimated noise=536.522 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000806793 Jy ! Component: 100 - total flux cleaned = 0.00128264 Jy ! Component: 150 - total flux cleaned = 0.00115348 Jy ! Component: 200 - total flux cleaned = 0.00127079 Jy ! Total flux subtracted in 200 components = 0.00127079 Jy ! Clean residual min=-0.003899 max=0.003687 Jy/beam ! Clean residual mean=0.000013 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 1.64338 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 145 components and 1.64338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207744Jy sigma=0.001210 ! Fit after self-cal, rms=0.207777Jy sigma=0.001210 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00087322 Jy ! Component: 100 - total flux cleaned = 0.00110869 Jy ! Component: 150 - total flux cleaned = 0.00120315 Jy ! Component: 200 - total flux cleaned = 0.00119966 Jy ! Total flux subtracted in 200 components = 0.00119966 Jy ! Clean residual min=-0.003538 max=0.003531 Jy/beam ! Clean residual mean=0.000013 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 1.64458 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 153 components and 1.64458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207678Jy sigma=0.001209 ! Fit after self-cal, rms=0.207659Jy sigma=0.001209 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (-24.8, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238481 Jy ! Component: 100 - total flux cleaned = 0.00308923 Jy ! Component: 150 - total flux cleaned = 0.00351783 Jy ! Component: 200 - total flux cleaned = 0.00390308 Jy ! Total flux subtracted in 200 components = 0.00390308 Jy ! Clean residual min=-0.003198 max=0.002769 Jy/beam ! Clean residual mean=0.000007 rms=0.000748 Jy/beam ! Combined flux in latest and established models = 1.64848 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 159 components and 1.64848 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207576Jy sigma=0.001207 ! Fit after self-cal, rms=0.207560Jy sigma=0.001207 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207560Jy sigma=0.001207 ! Fit after self-cal, rms=0.207343Jy sigma=0.001206 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7125 mas, bmaj=1.804 mas, bpa=-2.723 degrees ! Estimated noise=536.721 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000564628 Jy ! Component: 100 - total flux cleaned = -0.000107713 Jy ! Component: 150 - total flux cleaned = 0.000203178 Jy ! Component: 200 - total flux cleaned = 0.000410639 Jy ! Total flux subtracted in 200 components = 0.000410639 Jy ! Clean residual min=-0.002901 max=0.002705 Jy/beam ! Clean residual mean=0.000020 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 1.64889 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 163 components and 1.64889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207275Jy sigma=0.001205 ! Fit after self-cal, rms=0.207278Jy sigma=0.001205 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401167 Jy ! Component: 100 - total flux cleaned = 0.000802316 Jy ! Component: 150 - total flux cleaned = 0.00104386 Jy ! Component: 200 - total flux cleaned = 0.00115554 Jy ! Total flux subtracted in 200 components = 0.00115554 Jy ! Clean residual min=-0.002714 max=0.002585 Jy/beam ! Clean residual mean=0.000020 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 1.65005 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 168 components and 1.65005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207244Jy sigma=0.001205 ! Fit after self-cal, rms=0.207240Jy sigma=0.001205 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207240Jy sigma=0.001205 ! Fit after self-cal, rms=0.207427Jy sigma=0.001204 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=2.474 mas, bmaj=3.269 mas, bpa=4.159 degrees ! Estimated noise=668.116 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157732 Jy ! Component: 100 - total flux cleaned = 0.000176655 Jy ! Component: 150 - total flux cleaned = 0.000279407 Jy ! Component: 200 - total flux cleaned = 0.00040406 Jy ! Total flux subtracted in 200 components = 0.00040406 Jy ! Clean residual min=-0.002783 max=0.003080 Jy/beam ! Clean residual mean=0.000041 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 1.65045 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 186 components and 1.65045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207420Jy sigma=0.001204 ! Fit after self-cal, rms=0.207402Jy sigma=0.001204 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000248531 Jy ! Component: 100 - total flux cleaned = 0.0004601 Jy ! Component: 150 - total flux cleaned = 0.000533695 Jy ! Component: 200 - total flux cleaned = 0.000532087 Jy ! Total flux subtracted in 200 components = 0.000532087 Jy ! Clean residual min=-0.002722 max=0.003049 Jy/beam ! Clean residual mean=0.000041 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 1.65098 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 194 components and 1.65098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207399Jy sigma=0.001204 ! Fit after self-cal, rms=0.207390Jy sigma=0.001204 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7133 mas, bmaj=1.805 mas, bpa=-2.71 degrees ! Estimated noise=536.909 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7133 x 1.805 at -2.71 degrees (North through East) ! Clean map min=-0.0052641 max=1.0855 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207390Jy sigma=0.001204 ! Fit after self-cal, rms=0.312609Jy sigma=0.001090 ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7129 mas, bmaj=1.803 mas, bpa=-2.733 degrees ! Estimated noise=536.625 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00103097 Jy ! Component: 100 - total flux cleaned = -0.00114443 Jy ! Component: 150 - total flux cleaned = -0.0010461 Jy ! Component: 200 - total flux cleaned = -0.00108979 Jy ! Total flux subtracted in 200 components = -0.00108979 Jy ! Clean residual min=-0.002371 max=0.002738 Jy/beam ! Clean residual mean=0.000019 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 1.64989 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 205 components and 1.64989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312597Jy sigma=0.001090 ! Fit after self-cal, rms=0.312582Jy sigma=0.001090 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (5.4, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148833 Jy ! Component: 100 - total flux cleaned = 0.00164735 Jy ! Component: 150 - total flux cleaned = 0.00173789 Jy ! Component: 200 - total flux cleaned = 0.00173919 Jy ! Total flux subtracted in 200 components = 0.00173919 Jy ! Clean residual min=-0.002366 max=0.002209 Jy/beam ! Clean residual mean=0.000018 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 1.65163 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 217 components and 1.65163 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312534Jy sigma=0.001090 ! Fit after self-cal, rms=0.312698Jy sigma=0.001090 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.312698Jy sigma=0.001090 ! Fit after self-cal, rms=0.318339Jy sigma=0.001090 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.5496 mas, bmaj=1.249 mas, bpa=-3.37 degrees ! Estimated noise=982.317 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.785973 Jy ! Component: 100 - total flux cleaned = 1.09032 Jy ! Component: 150 - total flux cleaned = 1.24194 Jy ! Component: 200 - total flux cleaned = 1.33109 Jy ! Total flux subtracted in 200 components = 1.33109 Jy ! Clean residual min=-0.014069 max=0.047065 Jy/beam ! Clean residual mean=0.000046 rms=0.004552 Jy/beam ! Combined flux in latest and established models = 1.33109 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.33109 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7135 mas, bmaj=1.802 mas, bpa=-2.724 degrees ! Estimated noise=536.926 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.113085 Jy ! Component: 100 - total flux cleaned = 0.179457 Jy ! Component: 150 - total flux cleaned = 0.221288 Jy ! Component: 200 - total flux cleaned = 0.249334 Jy ! Total flux subtracted in 200 components = 0.249334 Jy ! Clean residual min=-0.006998 max=0.015821 Jy/beam ! Clean residual mean=0.000051 rms=0.002409 Jy/beam ! Combined flux in latest and established models = 1.58042 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 70 components and 1.58043 Jy ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (2.2, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195772 Jy ! Component: 100 - total flux cleaned = 0.0334932 Jy ! Component: 150 - total flux cleaned = 0.0435921 Jy ! Component: 200 - total flux cleaned = 0.0509626 Jy ! Total flux subtracted in 200 components = 0.0509626 Jy ! Clean residual min=-0.003842 max=0.004464 Jy/beam ! Clean residual mean=0.000029 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 1.63139 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 101 components and 1.63139 Jy ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Added new window around map position (2, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0054617 Jy ! Component: 100 - total flux cleaned = 0.00879403 Jy ! Component: 150 - total flux cleaned = 0.0113154 Jy ! Component: 200 - total flux cleaned = 0.0133728 Jy ! Total flux subtracted in 200 components = 0.0133728 Jy ! Clean residual min=-0.003425 max=0.003114 Jy/beam ! Clean residual mean=0.000020 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 1.64476 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 130 components and 1.64476 Jy ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=2.474 mas, bmaj=3.27 mas, bpa=4.252 degrees ! Estimated noise=667.877 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306699 Jy ! Component: 100 - total flux cleaned = 0.00396906 Jy ! Component: 150 - total flux cleaned = 0.00464401 Jy ! Component: 200 - total flux cleaned = 0.00522439 Jy ! Total flux subtracted in 200 components = 0.00522439 Jy ! Clean residual min=-0.002728 max=0.002542 Jy/beam ! Clean residual mean=0.000036 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 1.64999 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036464 Jy ! Component: 100 - total flux cleaned = 0.000687818 Jy ! Component: 150 - total flux cleaned = 0.000862095 Jy ! Component: 200 - total flux cleaned = 0.000963231 Jy ! Total flux subtracted in 200 components = 0.000963231 Jy ! Clean residual min=-0.002625 max=0.002573 Jy/beam ! Clean residual mean=0.000033 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 1.65095 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 166 components and 1.65095 Jy ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! Estimated beam: bmin=0.7135 mas, bmaj=1.802 mas, bpa=-2.724 degrees ! Estimated noise=536.926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529507 Jy ! Component: 100 - total flux cleaned = 0.000524224 Jy ! Component: 150 - total flux cleaned = 0.000380974 Jy ! Component: 200 - total flux cleaned = 0.000380822 Jy ! Total flux subtracted in 200 components = 0.000380822 Jy ! Clean residual min=-0.002630 max=0.002375 Jy/beam ! Clean residual mean=0.000016 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 1.65133 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 180 components and 1.65133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318546Jy sigma=0.001106 ! Fit after self-cal, rms=0.318224Jy sigma=0.001100 wmodel J0339-0146_X_2000_03_13_pus_map.mod ! Writing 180 model components to file: J0339-0146_X_2000_03_13_pus_map.mod wobs J0339-0146_X_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J0339-0146_X_2000_03_13_pus_uvs.fits wwins J0339-0146_X_2000_03_13_pus_map.win ! wwins: Wrote 10 windows to J0339-0146_X_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000797964 Jy ! Component: 100 - total flux cleaned = -0.000757646 Jy ! Component: 150 - total flux cleaned = -0.000556333 Jy ! Component: 200 - total flux cleaned = -0.000479151 Jy ! Component: 250 - total flux cleaned = -0.000480029 Jy ! Component: 300 - total flux cleaned = -0.00048033 Jy ! Component: 350 - total flux cleaned = -0.000516139 Jy ! Component: 400 - total flux cleaned = -0.000445713 Jy ! Component: 450 - total flux cleaned = -0.000480173 Jy ! Component: 500 - total flux cleaned = -0.000342976 Jy ! Component: 550 - total flux cleaned = -0.000377215 Jy ! Component: 600 - total flux cleaned = -0.000377056 Jy ! Component: 650 - total flux cleaned = -0.000245661 Jy ! Component: 700 - total flux cleaned = -0.00027869 Jy ! Component: 750 - total flux cleaned = -0.000311137 Jy ! Component: 800 - total flux cleaned = -0.000311161 Jy ! Component: 850 - total flux cleaned = -0.000310884 Jy ! Component: 900 - total flux cleaned = -0.000373385 Jy ! Component: 950 - total flux cleaned = -0.000435798 Jy ! Component: 1000 - total flux cleaned = -0.000528039 Jy ! Component: 1050 - total flux cleaned = -0.000466802 Jy ! Component: 1100 - total flux cleaned = -0.000527686 Jy ! Component: 1150 - total flux cleaned = -0.000588043 Jy ! Component: 1200 - total flux cleaned = -0.000588427 Jy ! Component: 1250 - total flux cleaned = -0.000706971 Jy ! Component: 1300 - total flux cleaned = -0.000765726 Jy ! Component: 1350 - total flux cleaned = -0.000795128 Jy ! Component: 1400 - total flux cleaned = -0.000795038 Jy ! Component: 1450 - total flux cleaned = -0.000794724 Jy ! Component: 1500 - total flux cleaned = -0.000766205 Jy ! Component: 1550 - total flux cleaned = -0.000794634 Jy ! Component: 1600 - total flux cleaned = -0.00082248 Jy ! Component: 1650 - total flux cleaned = -0.000710433 Jy ! Component: 1700 - total flux cleaned = -0.000766267 Jy ! Component: 1750 - total flux cleaned = -0.000793675 Jy ! Component: 1800 - total flux cleaned = -0.000738752 Jy ! Component: 1850 - total flux cleaned = -0.000657119 Jy ! Component: 1900 - total flux cleaned = -0.000521154 Jy ! Component: 1950 - total flux cleaned = -0.000440231 Jy ! Component: 2000 - total flux cleaned = -0.000493949 Jy ! Total flux subtracted in 2048 components = -0.000440489 Jy ! Clean residual min=-0.001482 max=0.001333 Jy/beam ! Clean residual mean=0.000016 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 1.65089 Jy keep ! Adding 155 model components to the UV plane model. ! The established model now contains 333 components and 1.65089 Jy ![Exited script file: muppet] wmap "J0339-0146_X_2000_03_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7135 x 1.802 at -2.724 degrees (North through East) ! Clean map min=-0.0035476 max=1.0918 Jy/beam ! Writing clean map to FITS file: J0339-0146_X_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.09182 invert ! Inverting map ! Your choice of large map pixels excluded 2.31% of the data. ! The x-axis pixel size should ideally be below 0.1645 milli-arcsec ! The y-axis pixel size should ideally be below 0.1927 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000497505 device "J0339-0146_X_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_X_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.136699 0.136699 0.273398 0.546797 1.09359 2.18719 4.37437 8.74875 17.4975 34.995 69.99 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.091 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7135 x 1.802 at -2.724 degrees (North through East) ! Clean map min=-0.0035476 max=1.0918 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0339-0146_X_2000_03_13_pus_uvs.log closed on Wed Apr 3 15:43:47 2013