! Started logfile: J0241-0815_X_2000_03_13_pus_uvs.log on Mon Apr 1 13:24:40 2013 obs J0241-0815_X_2000_03_13_pus_uva.fits ! Reading UV FITS file: J0241-0815_X_2000_03_13_pus_uva.fits ! AN table 1: 10 integrations on 190 of 190 possible baselines. ! AN table 2: 54 integrations on 190 of 190 possible baselines. ! AN table 3: 52 integrations on 190 of 190 possible baselines. ! AN table 4: 124 integrations on 190 of 190 possible baselines. ! AN table 5: 109 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.0494646 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0241-0815 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2382 lines of history. ! ! Reading 13120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0241-0815_X_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 763 telescope corrections were flagged in sub-array 2. ! A total of 804 telescope corrections were flagged in sub-array 3. ! A total of 2241 telescope corrections were flagged in sub-array 4. ! A total of 1774 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 763 telescope corrections were flagged in sub-array 2. ! A total of 804 telescope corrections were flagged in sub-array 3. ! A total of 2241 telescope corrections were flagged in sub-array 4. ! A total of 1774 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 763 telescope corrections were flagged in sub-array 2. ! A total of 804 telescope corrections were flagged in sub-array 3. ! A total of 2241 telescope corrections were flagged in sub-array 4. ! A total of 1774 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 200 telescope corrections were flagged in sub-array 1. ! A total of 786 telescope corrections were flagged in sub-array 2. ! A total of 804 telescope corrections were flagged in sub-array 3. ! A total of 2241 telescope corrections were flagged in sub-array 4. ! A total of 1774 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.941153Jy sigma=0.007687 ! Fit after self-cal, rms=0.791097Jy sigma=0.006851 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6456 mas, bmaj=1.433 mas, bpa=-3.247 degrees ! Estimated noise=1127.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189467 Jy ! Component: 100 - total flux cleaned = 0.277739 Jy ! Total flux subtracted in 100 components = 0.277739 Jy ! Clean residual min=-0.034153 max=0.093278 Jy/beam ! Clean residual mean=-0.000419 rms=0.012444 Jy/beam ! Combined flux in latest and established models = 0.277739 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.277739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.416937Jy sigma=0.003477 ! Fit after self-cal, rms=0.415769Jy sigma=0.003470 ! Inverting map ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (1, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0826247 Jy ! Component: 100 - total flux cleaned = 0.129997 Jy ! Total flux subtracted in 100 components = 0.129997 Jy ! Clean residual min=-0.031891 max=0.078047 Jy/beam ! Clean residual mean=-0.000300 rms=0.010942 Jy/beam ! Combined flux in latest and established models = 0.407736 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.407736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.378632Jy sigma=0.003058 ! Fit after self-cal, rms=0.376758Jy sigma=0.003040 ! Inverting map ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-3.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0726941 Jy ! Component: 100 - total flux cleaned = 0.116739 Jy ! Total flux subtracted in 100 components = 0.116739 Jy ! Clean residual min=-0.026567 max=0.070132 Jy/beam ! Clean residual mean=-0.000225 rms=0.009453 Jy/beam ! Combined flux in latest and established models = 0.524475 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 30 components and 0.524475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.350713Jy sigma=0.002728 ! Fit after self-cal, rms=0.347024Jy sigma=0.002694 ! Inverting map ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.8571 mas, bmaj=1.555 mas, bpa=-4.441 degrees ! Estimated noise=730.744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0977278 Jy ! Component: 100 - total flux cleaned = 0.161084 Jy ! Component: 150 - total flux cleaned = 0.204439 Jy ! Component: 200 - total flux cleaned = 0.234895 Jy ! Total flux subtracted in 200 components = 0.234895 Jy ! Clean residual min=-0.035422 max=0.081384 Jy/beam ! Clean residual mean=-0.000560 rms=0.014545 Jy/beam ! Combined flux in latest and established models = 0.75937 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 41 components and 0.75937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318273Jy sigma=0.002297 ! Fit after self-cal, rms=0.316169Jy sigma=0.002275 ! Inverting map ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-6.2, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0775381 Jy ! Component: 100 - total flux cleaned = 0.117715 Jy ! Component: 150 - total flux cleaned = 0.146087 Jy ! Component: 200 - total flux cleaned = 0.168464 Jy ! Total flux subtracted in 200 components = 0.168464 Jy ! Clean residual min=-0.030305 max=0.058678 Jy/beam ! Clean residual mean=-0.000305 rms=0.011137 Jy/beam ! Combined flux in latest and established models = 0.927834 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 75 components and 0.927834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298920Jy sigma=0.002016 ! Fit after self-cal, rms=0.296831Jy sigma=0.001989 ! Inverting map ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-9.4, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0596183 Jy ! Component: 100 - total flux cleaned = 0.0888272 Jy ! Component: 150 - total flux cleaned = 0.108871 Jy ! Component: 200 - total flux cleaned = 0.121088 Jy ! Total flux subtracted in 200 components = 0.121088 Jy ! Clean residual min=-0.024026 max=0.051421 Jy/beam ! Clean residual mean=-0.000196 rms=0.008569 Jy/beam ! Combined flux in latest and established models = 1.04892 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 109 components and 1.04892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285359Jy sigma=0.001839 ! Fit after self-cal, rms=0.282588Jy sigma=0.001805 ! Inverting map ! Your choice of large map pixels excluded 0.481% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.85 FD 0.88 GC 5.27 KP 0.94 ! LA 0.89 NL 1.96 OV 1.20 PT 1.05 ! SC 2.07 WF 1.29 HH 1.00* KK 1.00 ! MA 1.00* MC 1.00* MK 0.94 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.83 FD 0.85 GC 1.00* KP 0.98 ! LA 0.97 NL 1.64 OV 0.91 PT 1.03 ! SC 1.42 WF 1.12 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.01 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 147 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 0.59 KK 1.00* ! MA 0.77 MC 1.27 MK 1.00* NY 1.00* ! ON 1.00* TS 1.00* WZ 1.23 HN 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.12 FD 1.00* GC 0.93 KP 0.96 ! LA 1.00* NL 1.00* OV 1.10 PT 0.97 ! SC 1.00* WF 1.00* HH 1.00* KK 0.99 ! MA 1.00* MC 1.00* MK 0.99 NY 1.00* ! ON 1.00* TS 2.58 WZ 1.00* HN 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.82 FD 0.88 GC 4.77 KP 0.92 ! LA 0.84 NL 2.10 OV 1.19 PT 1.04 ! SC 1.84 WF 1.46 HH 1.00* KK 0.92 ! MA 1.00* MC 1.00* MK 1.05 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.84 FD 0.85 GC 1.00* KP 0.95 ! LA 0.94 NL 1.76 OV 0.90 PT 1.00 ! SC 1.26 WF 1.00 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 147 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.34 KK 1.00* ! MA 0.80 MC 1.13 MK 1.00* NY 1.00* ! ON 1.00* TS 1.00* WZ 1.34 HN 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.13 FD 1.00* GC 0.97 KP 0.93 ! LA 1.00* NL 1.00* OV 1.08 PT 0.94 ! SC 1.00* WF 1.00* HH 1.00* KK 0.99 ! MA 1.00* MC 1.00* MK 0.97 NY 1.00* ! ON 1.00* TS 3.03 WZ 1.00* HN 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 51 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.84 FD 0.92 GC 3.62 KP 0.95 ! LA 0.84 NL 1.89 OV 1.27 PT 1.07 ! SC 1.91 WF 1.38 HH 1.00* KK 0.94 ! MA 1.00* MC 1.00* MK 0.99 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.89 FD 0.88 GC 1.00* KP 0.97 ! LA 0.95 NL 1.70 OV 0.93 PT 1.02 ! SC 1.06 WF 1.00 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 0.92 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 147 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 1.68 KK 1.00* ! MA 0.84 MC 1.07 MK 1.00* NY 1.00* ! ON 1.00* TS 1.00* WZ 1.29 HN 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.24 FD 1.00* GC 0.91 KP 0.97 ! LA 1.00* NL 1.00* OV 1.09 PT 0.96 ! SC 1.00* WF 1.00* HH 1.00* KK 1.01 ! MA 1.00* MC 1.00* MK 0.98 NY 1.00* ! ON 1.00* TS 4.40 WZ 1.00* HN 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* WF 0.00* HH 0.00* KK 0.00* ! MA 0.00* MC 0.00* MK 0.00* NY 0.00* ! ON 0.00* TS 0.00* WZ 0.00* HN 0.00* ! ! A total of 57 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.83 FD 0.91 GC 3.00 KP 0.91 ! LA 0.90 NL 1.76 OV 1.31 PT 1.05 ! SC 2.15 WF 0.72 HH 1.00* KK 0.93 ! MA 1.00* MC 1.00* MK 1.03 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 0.87 GC 1.00* KP 0.99 ! LA 0.97 NL 1.57 OV 0.95 PT 1.03 ! SC 1.27 WF 1.09 HH 1.00* KK 1.00* ! MA 1.00* MC 1.00* MK 1.13 NY 1.00* ! ON 1.00* TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 147 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* KP 1.00* ! LA 1.00* NL 1.00* OV 1.00* PT 1.00* ! SC 1.00* WF 1.00* HH 2.99 KK 1.00* ! MA 0.86 MC 1.03 MK 1.00* NY 1.00* ! ON 1.00* TS 1.00* WZ 1.26 HN 1.00* ! ! A total of 90 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.28 FD 1.00* GC 0.92 KP 0.95 ! LA 1.00* NL 1.00* OV 1.09 PT 0.96 ! SC 1.00* WF 1.00* HH 1.00* KK 1.02 ! MA 1.00* MC 1.00* MK 2.81 NY 1.00* ! ON 1.00* TS 3.25 WZ 1.00* HN 1.00* ! ! ! Fit before self-cal, rms=0.282588Jy sigma=0.001805 ! Fit after self-cal, rms=0.388509Jy sigma=0.001512 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.9345 mas, bmaj=1.753 mas, bpa=-8.368 degrees ! Estimated noise=852.297 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250086 Jy ! Component: 100 - total flux cleaned = 0.00198237 Jy ! Component: 150 - total flux cleaned = 0.000984944 Jy ! Component: 200 - total flux cleaned = 0.000100292 Jy ! Total flux subtracted in 200 components = 0.000100292 Jy ! Clean residual min=-0.015968 max=0.024429 Jy/beam ! Clean residual mean=-0.000043 rms=0.005151 Jy/beam ! Combined flux in latest and established models = 1.04902 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 124 components and 1.04902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386548Jy sigma=0.001489 ! Fit after self-cal, rms=0.389701Jy sigma=0.001477 ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389701Jy sigma=0.001477 ! Fit after self-cal, rms=0.388556Jy sigma=0.001472 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.9298 mas, bmaj=1.747 mas, bpa=-7.845 degrees ! Estimated noise=854.55 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136125 Jy ! Component: 100 - total flux cleaned = 0.000432647 Jy ! Component: 150 - total flux cleaned = 1.52729e-05 Jy ! Component: 200 - total flux cleaned = -0.000374739 Jy ! Total flux subtracted in 200 components = -0.000374739 Jy ! Clean residual min=-0.014487 max=0.023358 Jy/beam ! Clean residual mean=-0.000038 rms=0.004880 Jy/beam ! Combined flux in latest and established models = 1.04865 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 126 components and 1.04865 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.387432Jy sigma=0.001457 ! Fit after self-cal, rms=0.387556Jy sigma=0.001454 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (6, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022325 Jy ! Component: 100 - total flux cleaned = 0.029129 Jy ! Component: 150 - total flux cleaned = 0.0322137 Jy ! Component: 200 - total flux cleaned = 0.03417 Jy ! Total flux subtracted in 200 components = 0.03417 Jy ! Clean residual min=-0.013281 max=0.016389 Jy/beam ! Clean residual mean=0.000011 rms=0.004029 Jy/beam ! Combined flux in latest and established models = 1.08282 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 146 components and 1.08282 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.386108Jy sigma=0.001421 ! Fit after self-cal, rms=0.385270Jy sigma=0.001419 ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.385270Jy sigma=0.001419 ! Fit after self-cal, rms=0.371735Jy sigma=0.001413 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.9264 mas, bmaj=1.744 mas, bpa=-7.062 degrees ! Estimated noise=847.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00887132 Jy ! Component: 100 - total flux cleaned = 0.0108867 Jy ! Component: 150 - total flux cleaned = 0.0119514 Jy ! Component: 200 - total flux cleaned = 0.0119509 Jy ! Total flux subtracted in 200 components = 0.0119509 Jy ! Clean residual min=-0.012078 max=0.016577 Jy/beam ! Clean residual mean=-0.000006 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 1.09477 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 152 components and 1.09477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.370893Jy sigma=0.001400 ! Fit after self-cal, rms=0.370414Jy sigma=0.001399 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.4, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103551 Jy ! Component: 100 - total flux cleaned = 0.00992221 Jy ! Component: 150 - total flux cleaned = 0.00994486 Jy ! Component: 200 - total flux cleaned = 0.00959419 Jy ! Total flux subtracted in 200 components = 0.00959419 Jy ! Clean residual min=-0.011719 max=0.014864 Jy/beam ! Clean residual mean=0.000020 rms=0.003217 Jy/beam ! Combined flux in latest and established models = 1.10436 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 165 components and 1.10436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.369189Jy sigma=0.001385 ! Fit after self-cal, rms=0.368830Jy sigma=0.001383 ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-17.6, -7.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148622 Jy ! Component: 100 - total flux cleaned = 0.0149095 Jy ! Component: 150 - total flux cleaned = 0.0142261 Jy ! Component: 200 - total flux cleaned = 0.0135932 Jy ! Total flux subtracted in 200 components = 0.0135932 Jy ! Clean residual min=-0.011270 max=0.012460 Jy/beam ! Clean residual mean=0.000064 rms=0.002869 Jy/beam ! Combined flux in latest and established models = 1.11796 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 182 components and 1.11796 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.367757Jy sigma=0.001369 ! Fit after self-cal, rms=0.367558Jy sigma=0.001368 ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-5.6, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101112 Jy ! Component: 100 - total flux cleaned = 0.0141663 Jy ! Component: 150 - total flux cleaned = 0.0156597 Jy ! Component: 200 - total flux cleaned = 0.0159453 Jy ! Total flux subtracted in 200 components = 0.0159453 Jy ! Clean residual min=-0.011020 max=0.010394 Jy/beam ! Clean residual mean=0.000065 rms=0.002639 Jy/beam ! Combined flux in latest and established models = 1.1339 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 194 components and 1.1339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366761Jy sigma=0.001360 ! Fit after self-cal, rms=0.366615Jy sigma=0.001359 ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366615Jy sigma=0.001359 ! Fit after self-cal, rms=0.357291Jy sigma=0.001354 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=2.555 mas, bmaj=3.621 mas, bpa=9.756 degrees ! Estimated noise=947.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822454 Jy ! Component: 100 - total flux cleaned = 0.0105562 Jy ! Component: 150 - total flux cleaned = 0.0120887 Jy ! Component: 200 - total flux cleaned = 0.0130184 Jy ! Total flux subtracted in 200 components = 0.0130184 Jy ! Clean residual min=-0.009344 max=0.007748 Jy/beam ! Clean residual mean=0.000056 rms=0.002587 Jy/beam ! Combined flux in latest and established models = 1.14692 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 216 components and 1.14692 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357168Jy sigma=0.001350 ! Fit after self-cal, rms=0.356751Jy sigma=0.001349 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207724 Jy ! Component: 100 - total flux cleaned = 0.0022683 Jy ! Component: 150 - total flux cleaned = 0.00246758 Jy ! Component: 200 - total flux cleaned = 0.00266404 Jy ! Total flux subtracted in 200 components = 0.00266404 Jy ! Clean residual min=-0.008992 max=0.007496 Jy/beam ! Clean residual mean=0.000061 rms=0.002494 Jy/beam ! Combined flux in latest and established models = 1.14958 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 228 components and 1.14958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356648Jy sigma=0.001348 ! Fit after self-cal, rms=0.356515Jy sigma=0.001348 ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.9098 mas, bmaj=1.727 mas, bpa=-5.588 degrees ! Estimated noise=832.348 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9098 x 1.727 at -5.588 degrees (North through East) ! Clean map min=-0.024818 max=0.23795 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.6825 mas, bmaj=1.496 mas, bpa=-6.064 degrees ! Estimated noise=1367.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.22474 Jy ! Component: 100 - total flux cleaned = 0.363956 Jy ! Component: 150 - total flux cleaned = 0.465039 Jy ! Component: 200 - total flux cleaned = 0.544572 Jy ! Total flux subtracted in 200 components = 0.544572 Jy ! Clean residual min=-0.030273 max=0.057668 Jy/beam ! Clean residual mean=-0.000293 rms=0.009372 Jy/beam ! Combined flux in latest and established models = 0.544572 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.544572 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.9098 mas, bmaj=1.727 mas, bpa=-5.588 degrees ! Estimated noise=832.348 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119457 Jy ! Component: 100 - total flux cleaned = 0.203679 Jy ! Component: 150 - total flux cleaned = 0.268628 Jy ! Component: 200 - total flux cleaned = 0.31976 Jy ! Total flux subtracted in 200 components = 0.31976 Jy ! Clean residual min=-0.019935 max=0.035917 Jy/beam ! Clean residual mean=-0.000511 rms=0.007865 Jy/beam ! Combined flux in latest and established models = 0.864333 Jy ! Adding 73 model components to the UV plane model. ! The established model now contains 81 components and 0.864333 Jy ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Added new window around map position (-2.4, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0418427 Jy ! Component: 100 - total flux cleaned = 0.0754231 Jy ! Component: 150 - total flux cleaned = 0.103446 Jy ! Component: 200 - total flux cleaned = 0.127318 Jy ! Total flux subtracted in 200 components = 0.127318 Jy ! Clean residual min=-0.013448 max=0.016317 Jy/beam ! Clean residual mean=-0.000239 rms=0.004540 Jy/beam ! Combined flux in latest and established models = 0.991651 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 129 components and 0.991651 Jy ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=2.555 mas, bmaj=3.621 mas, bpa=9.756 degrees ! Estimated noise=947.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330725 Jy ! Component: 100 - total flux cleaned = 0.0576579 Jy ! Component: 150 - total flux cleaned = 0.0765031 Jy ! Component: 200 - total flux cleaned = 0.091263 Jy ! Total flux subtracted in 200 components = 0.091263 Jy ! Clean residual min=-0.011600 max=0.014222 Jy/beam ! Clean residual mean=-0.000086 rms=0.003653 Jy/beam ! Combined flux in latest and established models = 1.08291 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114053 Jy ! Component: 100 - total flux cleaned = 0.0166621 Jy ! Component: 150 - total flux cleaned = 0.0220206 Jy ! Component: 200 - total flux cleaned = 0.0262249 Jy ! Total flux subtracted in 200 components = 0.0262249 Jy ! Clean residual min=-0.009081 max=0.010833 Jy/beam ! Clean residual mean=0.000010 rms=0.002777 Jy/beam ! Combined flux in latest and established models = 1.10914 Jy ! Adding 95 model components to the UV plane model. ! The established model now contains 216 components and 1.10914 Jy ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! Estimated beam: bmin=0.9098 mas, bmaj=1.727 mas, bpa=-5.588 degrees ! Estimated noise=832.348 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157154 Jy ! Component: 100 - total flux cleaned = 0.00488578 Jy ! Component: 150 - total flux cleaned = 0.00894181 Jy ! Component: 200 - total flux cleaned = 0.0126379 Jy ! Total flux subtracted in 200 components = 0.0126379 Jy ! Clean residual min=-0.008003 max=0.008321 Jy/beam ! Clean residual mean=0.000018 rms=0.002168 Jy/beam ! Combined flux in latest and established models = 1.12178 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 242 components and 1.12178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356568Jy sigma=0.001342 ! Fit after self-cal, rms=0.354461Jy sigma=0.001332 wmodel J0241-0815_X_2000_03_13_pus_map.mod ! Writing 242 model components to file: J0241-0815_X_2000_03_13_pus_map.mod wobs J0241-0815_X_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J0241-0815_X_2000_03_13_pus_uvs.fits wwins J0241-0815_X_2000_03_13_pus_map.win ! wwins: Wrote 11 windows to J0241-0815_X_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136629 Jy ! Component: 100 - total flux cleaned = -0.00135802 Jy ! Component: 150 - total flux cleaned = -0.00224824 Jy ! Component: 200 - total flux cleaned = -0.00335359 Jy ! Component: 250 - total flux cleaned = -0.00407061 Jy ! Component: 300 - total flux cleaned = -0.00500351 Jy ! Component: 350 - total flux cleaned = -0.00613592 Jy ! Component: 400 - total flux cleaned = -0.00679957 Jy ! Component: 450 - total flux cleaned = -0.00798818 Jy ! Component: 500 - total flux cleaned = -0.00862255 Jy ! Component: 550 - total flux cleaned = -0.00935049 Jy ! Component: 600 - total flux cleaned = -0.00986234 Jy ! Component: 650 - total flux cleaned = -0.0100644 Jy ! Component: 700 - total flux cleaned = -0.00976897 Jy ! Component: 750 - total flux cleaned = -0.00986875 Jy ! Component: 800 - total flux cleaned = -0.00986855 Jy ! Component: 850 - total flux cleaned = -0.00958155 Jy ! Component: 900 - total flux cleaned = -0.00976984 Jy ! Component: 950 - total flux cleaned = -0.0094898 Jy ! Component: 1000 - total flux cleaned = -0.00930405 Jy ! Component: 1050 - total flux cleaned = -0.00930324 Jy ! Component: 1100 - total flux cleaned = -0.00912233 Jy ! Component: 1150 - total flux cleaned = -0.0086731 Jy ! Component: 1200 - total flux cleaned = -0.00849527 Jy ! Component: 1250 - total flux cleaned = -0.00805619 Jy ! Component: 1300 - total flux cleaned = -0.00779615 Jy ! Component: 1350 - total flux cleaned = -0.00770999 Jy ! Component: 1400 - total flux cleaned = -0.00771071 Jy ! Component: 1450 - total flux cleaned = -0.00771005 Jy ! Component: 1500 - total flux cleaned = -0.00729296 Jy ! Component: 1550 - total flux cleaned = -0.00762361 Jy ! Component: 1600 - total flux cleaned = -0.00754195 Jy ! Component: 1650 - total flux cleaned = -0.00713698 Jy ! Component: 1700 - total flux cleaned = -0.00729866 Jy ! Component: 1750 - total flux cleaned = -0.00753815 Jy ! Component: 1800 - total flux cleaned = -0.00737974 Jy ! Component: 1850 - total flux cleaned = -0.00722261 Jy ! Component: 1900 - total flux cleaned = -0.00706688 Jy ! Component: 1950 - total flux cleaned = -0.00722185 Jy ! Component: 2000 - total flux cleaned = -0.00691484 Jy ! Total flux subtracted in 2048 components = -0.00683828 Jy ! Clean residual min=-0.004679 max=0.004217 Jy/beam ! Clean residual mean=0.000005 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 1.11494 Jy keep ! Adding 148 model components to the UV plane model. ! The established model now contains 386 components and 1.11494 Jy ![Exited script file: muppet] wmap "J0241-0815_X_2000_03_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9098 x 1.727 at -5.588 degrees (North through East) ! Clean map min=-0.014235 max=0.22422 Jy/beam ! Writing clean map to FITS file: J0241-0815_X_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.224218 invert ! Inverting map ! Your choice of large map pixels excluded 0.53% of the data. ! The x-axis pixel size should ideally be below 0.1946 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00137264 device "J0241-0815_X_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J0241-0815_X_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.83656 1.83656 3.67313 7.34625 14.6925 29.385 58.77 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0041 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.224 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9098 x 1.727 at -5.588 degrees (North through East) ! Clean map min=-0.014235 max=0.22422 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0241-0815_X_2000_03_13_pus_uvs.log closed on Mon Apr 1 13:24:50 2013