! Started logfile: J0204+1514_X_2000_03_13_pus_uvs.log on Wed Apr 3 15:33:43 2013 obs J0204+1514_X_2000_03_13_pus_uva.fits ! Reading UV FITS file: J0204+1514_X_2000_03_13_pus_uva.fits ! AN table 1: 98 integrations on 190 of 190 possible baselines. ! AN table 2: 319 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.127098 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0204+1514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2386 lines of history. ! ! Reading 40280 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0204+1514_X_2000_03_13_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1153 telescope corrections were flagged in sub-array 1. ! A total of 4851 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 1153 telescope corrections were flagged in sub-array 1. ! A total of 4955 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 1157 telescope corrections were flagged in sub-array 1. ! A total of 4946 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 1153 telescope corrections were flagged in sub-array 1. ! A total of 4961 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=0.802020Jy sigma=0.007261 ! Fit after self-cal, rms=0.359358Jy sigma=0.002988 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.5162 mas, bmaj=1.061 mas, bpa=-4.93 degrees ! Estimated noise=1212.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.606372 Jy ! Component: 100 - total flux cleaned = 0.821028 Jy ! Total flux subtracted in 100 components = 0.821028 Jy ! Clean residual min=-0.022984 max=0.098339 Jy/beam ! Clean residual mean=0.000001 rms=0.007735 Jy/beam ! Combined flux in latest and established models = 0.821028 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.821028 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.309623Jy sigma=0.002809 ! Fit after self-cal, rms=0.308685Jy sigma=0.002805 ! Inverting map ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.110852 Jy ! Component: 100 - total flux cleaned = 0.170994 Jy ! Total flux subtracted in 100 components = 0.170994 Jy ! Clean residual min=-0.016912 max=0.047333 Jy/beam ! Clean residual mean=-0.000022 rms=0.004970 Jy/beam ! Combined flux in latest and established models = 0.992022 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.992022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.243094Jy sigma=0.002017 ! Fit after self-cal, rms=0.242812Jy sigma=0.002015 ! Inverting map ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-0.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476384 Jy ! Component: 100 - total flux cleaned = 0.0793227 Jy ! Total flux subtracted in 100 components = 0.0793227 Jy ! Clean residual min=-0.014932 max=0.030238 Jy/beam ! Clean residual mean=-0.000031 rms=0.004242 Jy/beam ! Combined flux in latest and established models = 1.07134 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 1.07134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226533Jy sigma=0.001781 ! Fit after self-cal, rms=0.225389Jy sigma=0.001776 ! Inverting map ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-4.4, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305441 Jy ! Component: 100 - total flux cleaned = 0.0533856 Jy ! Total flux subtracted in 100 components = 0.0533856 Jy ! Clean residual min=-0.014870 max=0.024314 Jy/beam ! Clean residual mean=-0.000038 rms=0.003801 Jy/beam ! Combined flux in latest and established models = 1.12473 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 40 components and 1.12473 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218135Jy sigma=0.001664 ! Fit after self-cal, rms=0.217543Jy sigma=0.001661 ! Inverting map ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-3.6, 3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0254187 Jy ! Component: 100 - total flux cleaned = 0.0448637 Jy ! Total flux subtracted in 100 components = 0.0448637 Jy ! Clean residual min=-0.013768 max=0.015244 Jy/beam ! Clean residual mean=-0.000043 rms=0.003479 Jy/beam ! Combined flux in latest and established models = 1.16959 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 50 components and 1.16959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212212Jy sigma=0.001576 ! Fit after self-cal, rms=0.211734Jy sigma=0.001574 ! Inverting map ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.677 mas, bmaj=1.442 mas, bpa=-4.553 degrees ! Estimated noise=434.875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372633 Jy ! Component: 100 - total flux cleaned = 0.0634645 Jy ! Component: 150 - total flux cleaned = 0.0830187 Jy ! Component: 200 - total flux cleaned = 0.0978099 Jy ! Total flux subtracted in 200 components = 0.0978099 Jy ! Clean residual min=-0.018324 max=0.019294 Jy/beam ! Clean residual mean=-0.000238 rms=0.004813 Jy/beam ! Combined flux in latest and established models = 1.2674 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 75 components and 1.2674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205536Jy sigma=0.001458 ! Fit after self-cal, rms=0.204665Jy sigma=0.001452 ! Inverting map ! Your choice of large map pixels excluded 0.924% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.96 GC 1.05 KP 0.99 ! LA 0.97 NL 0.99 OV 0.99 PT 0.96 ! SC 0.95 WF 1.04 HH 1.00* KK 1.00* ! MA 0.96 MC 1.10 MK 1.00* NY 0.95 ! ON 0.99 TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.01 GC 1.13 KP 0.91 ! LA 1.04 NL 0.99 OV 0.94 PT 1.02 ! SC 0.97 WF 0.96 HH 1.11 KK 0.98 ! MA 1.30 MC 0.95 MK 0.92 NY 0.96 ! ON 0.98 TS 1.00* WZ 0.97 HN 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 GC 1.05 KP 0.96 ! LA 0.93 NL 1.03 OV 0.99 PT 0.93 ! SC 0.95 WF 1.07 HH 1.00* KK 1.00* ! MA 0.94 MC 1.09 MK 1.00* NY 0.99 ! ON 0.99 TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.06 FD 1.01 GC 1.13 KP 0.87 ! LA 1.00 NL 1.02 OV 0.93 PT 0.99 ! SC 0.95 WF 0.97 HH 1.03 KK 0.97 ! MA 1.01 MC 0.99 MK 0.98 NY 1.01 ! ON 1.01 TS 1.00* WZ 0.97 HN 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 GC 1.19 KP 0.97 ! LA 0.94 NL 1.00 OV 1.01 PT 0.96 ! SC 0.97 WF 1.09 HH 1.00* KK 1.00* ! MA 0.98 MC 1.00 MK 1.00* NY 1.05 ! ON 0.95 TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 54 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.10 FD 1.04 GC 0.99 KP 0.91 ! LA 1.00 NL 0.97 OV 0.95 PT 1.02 ! SC 0.99 WF 0.99 HH 1.26 KK 0.98 ! MA 1.02 MC 0.97 MK 0.97 NY 1.06 ! ON 1.02 TS 1.00* WZ 1.00 HN 1.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 GC 1.11 KP 0.96 ! LA 0.95 NL 1.02 OV 1.01 PT 0.97 ! SC 1.04 WF 1.09 HH 1.00* KK 1.00* ! MA 1.00 MC 1.08 MK 1.00* NY 1.05 ! ON 1.01 TS 1.00* WZ 1.00* HN 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.03 GC 0.97 KP 0.89 ! LA 1.02 NL 0.99 OV 0.95 PT 1.03 ! SC 1.04 WF 1.01 HH 1.23 KK 1.01 ! MA 1.00 MC 1.00 MK 0.99 NY 1.06 ! ON 1.03 TS 1.00* WZ 1.00 HN 1.00* ! ! ! Fit before self-cal, rms=0.204665Jy sigma=0.001452 ! Fit after self-cal, rms=0.197800Jy sigma=0.001326 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6838 mas, bmaj=1.463 mas, bpa=-4.71 degrees ! Estimated noise=432.763 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142494 Jy ! Component: 100 - total flux cleaned = 0.0171369 Jy ! Component: 150 - total flux cleaned = 0.0182486 Jy ! Component: 200 - total flux cleaned = 0.0192615 Jy ! Total flux subtracted in 200 components = 0.0192615 Jy ! Clean residual min=-0.007942 max=0.009992 Jy/beam ! Clean residual mean=-0.000077 rms=0.002107 Jy/beam ! Combined flux in latest and established models = 1.28667 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 91 components and 1.28667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197026Jy sigma=0.001310 ! Fit after self-cal, rms=0.196893Jy sigma=0.001308 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196893Jy sigma=0.001308 ! Fit after self-cal, rms=0.192662Jy sigma=0.001274 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6865 mas, bmaj=1.464 mas, bpa=-4.8 degrees ! Estimated noise=432.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00527964 Jy ! Component: 100 - total flux cleaned = 0.00587224 Jy ! Component: 150 - total flux cleaned = 0.00666482 Jy ! Component: 200 - total flux cleaned = 0.00718018 Jy ! Total flux subtracted in 200 components = 0.00718018 Jy ! Clean residual min=-0.004659 max=0.007571 Jy/beam ! Clean residual mean=0.000017 rms=0.001517 Jy/beam ! Combined flux in latest and established models = 1.29385 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 1.29385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192319Jy sigma=0.001269 ! Fit after self-cal, rms=0.192236Jy sigma=0.001268 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.6, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00828961 Jy ! Component: 100 - total flux cleaned = 0.0119578 Jy ! Component: 150 - total flux cleaned = 0.0132137 Jy ! Component: 200 - total flux cleaned = 0.0135648 Jy ! Total flux subtracted in 200 components = 0.0135648 Jy ! Clean residual min=-0.004344 max=0.006533 Jy/beam ! Clean residual mean=0.000012 rms=0.001287 Jy/beam ! Combined flux in latest and established models = 1.30741 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 113 components and 1.30741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191795Jy sigma=0.001264 ! Fit after self-cal, rms=0.191694Jy sigma=0.001263 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (0.6, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478061 Jy ! Component: 100 - total flux cleaned = 0.00689238 Jy ! Component: 150 - total flux cleaned = 0.00856842 Jy ! Component: 200 - total flux cleaned = 0.00936321 Jy ! Total flux subtracted in 200 components = 0.00936321 Jy ! Clean residual min=-0.004185 max=0.005401 Jy/beam ! Clean residual mean=0.000009 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 1.31677 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 1.31677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191425Jy sigma=0.001261 ! Fit after self-cal, rms=0.191401Jy sigma=0.001261 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (9.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439725 Jy ! Component: 100 - total flux cleaned = 0.00533134 Jy ! Component: 150 - total flux cleaned = 0.00607234 Jy ! Component: 200 - total flux cleaned = 0.00655854 Jy ! Total flux subtracted in 200 components = 0.00655854 Jy ! Clean residual min=-0.004026 max=0.004405 Jy/beam ! Clean residual mean=0.000007 rms=0.001058 Jy/beam ! Combined flux in latest and established models = 1.32333 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 140 components and 1.32333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191211Jy sigma=0.001259 ! Fit after self-cal, rms=0.191196Jy sigma=0.001259 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191196Jy sigma=0.001259 ! Fit after self-cal, rms=0.190240Jy sigma=0.001258 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6867 mas, bmaj=1.464 mas, bpa=-4.787 degrees ! Estimated noise=432.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375914 Jy ! Component: 100 - total flux cleaned = 0.00498416 Jy ! Component: 150 - total flux cleaned = 0.00556208 Jy ! Component: 200 - total flux cleaned = 0.00608216 Jy ! Total flux subtracted in 200 components = 0.00608216 Jy ! Clean residual min=-0.003443 max=0.004391 Jy/beam ! Clean residual mean=0.000016 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 1.32942 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 152 components and 1.32942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190106Jy sigma=0.001257 ! Fit after self-cal, rms=0.190066Jy sigma=0.001256 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373858 Jy ! Component: 100 - total flux cleaned = 0.00424579 Jy ! Component: 150 - total flux cleaned = 0.00450941 Jy ! Component: 200 - total flux cleaned = 0.00507795 Jy ! Total flux subtracted in 200 components = 0.00507795 Jy ! Clean residual min=-0.003407 max=0.003374 Jy/beam ! Clean residual mean=0.000013 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 1.33449 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 168 components and 1.33449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189921Jy sigma=0.001255 ! Fit after self-cal, rms=0.189906Jy sigma=0.001255 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189906Jy sigma=0.001255 ! Fit after self-cal, rms=0.189527Jy sigma=0.001255 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=2.573 mas, bmaj=2.77 mas, bpa=-45.55 degrees ! Estimated noise=527.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00447766 Jy ! Component: 100 - total flux cleaned = 0.00513976 Jy ! Component: 150 - total flux cleaned = 0.0057548 Jy ! Component: 200 - total flux cleaned = 0.00636611 Jy ! Total flux subtracted in 200 components = 0.00636611 Jy ! Clean residual min=-0.003260 max=0.003960 Jy/beam ! Clean residual mean=0.000026 rms=0.001112 Jy/beam ! Combined flux in latest and established models = 1.34086 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 181 components and 1.34086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189498Jy sigma=0.001254 ! Fit after self-cal, rms=0.189464Jy sigma=0.001254 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000927319 Jy ! Component: 100 - total flux cleaned = 0.00139062 Jy ! Component: 150 - total flux cleaned = 0.00174934 Jy ! Component: 200 - total flux cleaned = 0.00197442 Jy ! Total flux subtracted in 200 components = 0.00197442 Jy ! Clean residual min=-0.003400 max=0.003823 Jy/beam ! Clean residual mean=0.000024 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 1.34283 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 184 components and 1.34283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189460Jy sigma=0.001254 ! Fit after self-cal, rms=0.189451Jy sigma=0.001254 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6869 mas, bmaj=1.463 mas, bpa=-4.781 degrees ! Estimated noise=432.735 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6869 x 1.463 at -4.781 degrees (North through East) ! Clean map min=-0.0027623 max=0.85258 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189451Jy sigma=0.001254 ! Fit after self-cal, rms=0.197296Jy sigma=0.001162 ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6874 mas, bmaj=1.462 mas, bpa=-4.824 degrees ! Estimated noise=432.862 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124005 Jy ! Component: 100 - total flux cleaned = 0.00163792 Jy ! Component: 150 - total flux cleaned = 0.00199375 Jy ! Component: 200 - total flux cleaned = 0.00219088 Jy ! Total flux subtracted in 200 components = 0.00219088 Jy ! Clean residual min=-0.002473 max=0.002900 Jy/beam ! Clean residual mean=0.000006 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 1.34502 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 194 components and 1.34502 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197224Jy sigma=0.001162 ! Fit after self-cal, rms=0.197226Jy sigma=0.001162 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000404597 Jy ! Component: 100 - total flux cleaned = 0.00052706 Jy ! Component: 150 - total flux cleaned = 0.000701338 Jy ! Component: 200 - total flux cleaned = 0.000868095 Jy ! Total flux subtracted in 200 components = 0.000868095 Jy ! Clean residual min=-0.002461 max=0.002815 Jy/beam ! Clean residual mean=0.000005 rms=0.000685 Jy/beam ! Combined flux in latest and established models = 1.34589 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 198 components and 1.34589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197184Jy sigma=0.001161 ! Fit after self-cal, rms=0.197184Jy sigma=0.001161 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197184Jy sigma=0.001161 ! Fit after self-cal, rms=0.199965Jy sigma=0.001161 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.5232 mas, bmaj=1.087 mas, bpa=-5.969 degrees ! Estimated noise=1225.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.606154 Jy ! Component: 100 - total flux cleaned = 0.817951 Jy ! Component: 150 - total flux cleaned = 0.924215 Jy ! Component: 200 - total flux cleaned = 0.987952 Jy ! Total flux subtracted in 200 components = 0.987952 Jy ! Clean residual min=-0.014857 max=0.033655 Jy/beam ! Clean residual mean=0.000020 rms=0.004004 Jy/beam ! Combined flux in latest and established models = 0.987952 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.987952 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6874 mas, bmaj=1.462 mas, bpa=-4.825 degrees ! Estimated noise=432.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0924048 Jy ! Component: 100 - total flux cleaned = 0.152496 Jy ! Component: 150 - total flux cleaned = 0.195068 Jy ! Component: 200 - total flux cleaned = 0.226715 Jy ! Total flux subtracted in 200 components = 0.226715 Jy ! Clean residual min=-0.008304 max=0.018860 Jy/beam ! Clean residual mean=0.000078 rms=0.004019 Jy/beam ! Combined flux in latest and established models = 1.21467 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 84 components and 1.21467 Jy ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-1.4, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0243171 Jy ! Component: 100 - total flux cleaned = 0.0432183 Jy ! Component: 150 - total flux cleaned = 0.0580904 Jy ! Component: 200 - total flux cleaned = 0.069944 Jy ! Total flux subtracted in 200 components = 0.069944 Jy ! Clean residual min=-0.004490 max=0.008083 Jy/beam ! Clean residual mean=0.000038 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 1.28461 Jy ! Adding 63 model components to the UV plane model. ! The established model now contains 130 components and 1.28461 Jy ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Added new window around map position (-4.4, 3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00975012 Jy ! Component: 100 - total flux cleaned = 0.0175511 Jy ! Component: 150 - total flux cleaned = 0.0240101 Jy ! Component: 200 - total flux cleaned = 0.0295176 Jy ! Total flux subtracted in 200 components = 0.0295176 Jy ! Clean residual min=-0.003214 max=0.004650 Jy/beam ! Clean residual mean=0.000022 rms=0.001101 Jy/beam ! Combined flux in latest and established models = 1.31413 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 167 components and 1.31413 Jy ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=2.571 mas, bmaj=2.77 mas, bpa=-45.09 degrees ! Estimated noise=527.528 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00873893 Jy ! Component: 100 - total flux cleaned = 0.0147834 Jy ! Component: 150 - total flux cleaned = 0.019425 Jy ! Component: 200 - total flux cleaned = 0.0230964 Jy ! Total flux subtracted in 200 components = 0.0230964 Jy ! Clean residual min=-0.003416 max=0.003830 Jy/beam ! Clean residual mean=0.000024 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 1.33722 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262906 Jy ! Component: 100 - total flux cleaned = 0.00431505 Jy ! Component: 150 - total flux cleaned = 0.00574622 Jy ! Component: 200 - total flux cleaned = 0.0069686 Jy ! Total flux subtracted in 200 components = 0.0069686 Jy ! Clean residual min=-0.002919 max=0.003272 Jy/beam ! Clean residual mean=0.000016 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 1.34419 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 231 components and 1.34419 Jy ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! Estimated beam: bmin=0.6874 mas, bmaj=1.462 mas, bpa=-4.825 degrees ! Estimated noise=432.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830319 Jy ! Component: 100 - total flux cleaned = 0.00153913 Jy ! Component: 150 - total flux cleaned = 0.00216964 Jy ! Component: 200 - total flux cleaned = 0.00261697 Jy ! Total flux subtracted in 200 components = 0.00261697 Jy ! Clean residual min=-0.002356 max=0.002642 Jy/beam ! Clean residual mean=0.000006 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 1.34681 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 248 components and 1.34681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200305Jy sigma=0.001162 ! Fit after self-cal, rms=0.200808Jy sigma=0.001161 wmodel J0204+1514_X_2000_03_13_pus_map.mod ! Writing 248 model components to file: J0204+1514_X_2000_03_13_pus_map.mod wobs J0204+1514_X_2000_03_13_pus_uvs.fits ! Writing UV FITS file: J0204+1514_X_2000_03_13_pus_uvs.fits wwins J0204+1514_X_2000_03_13_pus_map.win ! wwins: Wrote 10 windows to J0204+1514_X_2000_03_13_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000885229 Jy ! Component: 100 - total flux cleaned = 0.00157268 Jy ! Component: 150 - total flux cleaned = 0.00173564 Jy ! Component: 200 - total flux cleaned = 0.00196812 Jy ! Component: 250 - total flux cleaned = 0.00222983 Jy ! Component: 300 - total flux cleaned = 0.00237568 Jy ! Component: 350 - total flux cleaned = 0.00241233 Jy ! Component: 400 - total flux cleaned = 0.00251617 Jy ! Component: 450 - total flux cleaned = 0.00234815 Jy ! Component: 500 - total flux cleaned = 0.00231569 Jy ! Component: 550 - total flux cleaned = 0.00218614 Jy ! Component: 600 - total flux cleaned = 0.00205816 Jy ! Component: 650 - total flux cleaned = 0.00187008 Jy ! Component: 700 - total flux cleaned = 0.00171594 Jy ! Component: 750 - total flux cleaned = 0.00156302 Jy ! Component: 800 - total flux cleaned = 0.0013832 Jy ! Component: 850 - total flux cleaned = 0.00126439 Jy ! Component: 900 - total flux cleaned = 0.00114716 Jy ! Component: 950 - total flux cleaned = 0.00105994 Jy ! Component: 1000 - total flux cleaned = 0.00103118 Jy ! Component: 1050 - total flux cleaned = 0.000917844 Jy ! Component: 1100 - total flux cleaned = 0.000861554 Jy ! Component: 1150 - total flux cleaned = 0.000805968 Jy ! Component: 1200 - total flux cleaned = 0.000778029 Jy ! Component: 1250 - total flux cleaned = 0.000696393 Jy ! Component: 1300 - total flux cleaned = 0.000534606 Jy ! Component: 1350 - total flux cleaned = 0.000587914 Jy ! Component: 1400 - total flux cleaned = 0.000428488 Jy ! Component: 1450 - total flux cleaned = 0.000428891 Jy ! Component: 1500 - total flux cleaned = 0.00032444 Jy ! Component: 1550 - total flux cleaned = 0.000246487 Jy ! Component: 1600 - total flux cleaned = 0.000246583 Jy ! Component: 1650 - total flux cleaned = 0.000144382 Jy ! Component: 1700 - total flux cleaned = 6.87271e-05 Jy ! Component: 1750 - total flux cleaned = 1.83287e-05 Jy ! Component: 1800 - total flux cleaned = 4.3023e-05 Jy ! Component: 1850 - total flux cleaned = -6.76981e-06 Jy ! Component: 1900 - total flux cleaned = -0.000129819 Jy ! Component: 1950 - total flux cleaned = -0.00012955 Jy ! Component: 2000 - total flux cleaned = -0.000105271 Jy ! Total flux subtracted in 2048 components = -0.000177437 Jy ! Clean residual min=-0.001372 max=0.001403 Jy/beam ! Clean residual mean=0.000002 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 1.34663 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 398 components and 1.34663 Jy ![Exited script file: muppet] wmap "J0204+1514_X_2000_03_13_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6874 x 1.462 at -4.825 degrees (North through East) ! Clean map min=-0.0018276 max=0.85434 Jy/beam ! Writing clean map to FITS file: J0204+1514_X_2000_03_13_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.854341 invert ! Inverting map ! Your choice of large map pixels excluded 0.902% of the data. ! The x-axis pixel size should ideally be below 0.1722 milli-arcsec ! The y-axis pixel size should ideally be below 0.1729 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000438932 device "J0204+1514_X_2000_03_13_pus\_map.eps/VPS" ! Attempting to open device: 'J0204+1514_X_2000_03_13_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.15413 0.15413 0.30826 0.61652 1.23304 2.46608 4.93216 9.86432 19.7286 39.4573 78.9146 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.854 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6874 x 1.462 at -4.825 degrees (North through East) ! Clean map min=-0.0018276 max=0.85434 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. quit ! Quitting program ! Log file J0204+1514_X_2000_03_13_pus_uvs.log closed on Wed Apr 3 15:34:00 2013