! Started logfile: 4C39.25_X.log on Thu Jun 12 14:24:42 2008 observe 4C39.25_X.edt ! Reading UV FITS file: 4C39.25_X.edt ! AN table 1: 27 integrations on 190 of 190 possible baselines. ! AN table 2: 16 integrations on 190 of 190 possible baselines. ! AN table 3: 48 integrations on 190 of 190 possible baselines. ! AN table 4: 79 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.311022 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 4C39.25 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1472 lines of history. ! ! Reading 40184 visibilities. ![@gonzo7-0.1 4C39.25_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 7.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 379 telescope corrections were flagged in sub-array 1. ! A total of 210 telescope corrections were flagged in sub-array 2. ! A total of 505 telescope corrections were flagged in sub-array 3. ! A total of 1005 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 379 telescope corrections were flagged in sub-array 1. ! A total of 210 telescope corrections were flagged in sub-array 2. ! A total of 505 telescope corrections were flagged in sub-array 3. ! A total of 1005 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 379 telescope corrections were flagged in sub-array 1. ! A total of 210 telescope corrections were flagged in sub-array 2. ! A total of 505 telescope corrections were flagged in sub-array 3. ! A total of 1005 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 379 telescope corrections were flagged in sub-array 1. ! A total of 210 telescope corrections were flagged in sub-array 2. ! A total of 505 telescope corrections were flagged in sub-array 3. ! A total of 1005 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=5.089378Jy sigma=56.028979 ! Fit after self-cal, rms=5.088782Jy sigma=56.044816 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.4993 mas, bmaj=0.7784 mas, bpa=-15.69 degrees ! Estimated noise=0.764746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.09048 Jy ! Total flux subtracted in 50 components = 3.09048 Jy ! Clean residual min=-0.149097 max=1.071809 Jy/beam ! Clean residual mean=0.000571 rms=0.044730 Jy/beam ! Combined flux in latest and established models = 3.09048 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 3.09048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.367798Jy sigma=35.268180 ! Fit after self-cal, rms=3.367602Jy sigma=35.267849 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.16378 Jy ! Total flux subtracted in 50 components = 1.16378 Jy ! Clean residual min=-0.109629 max=0.540948 Jy/beam ! Clean residual mean=0.000390 rms=0.032079 Jy/beam ! Combined flux in latest and established models = 4.25426 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 7 components and 4.25426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.603173Jy sigma=26.246308 ! Fit after self-cal, rms=2.603438Jy sigma=26.245181 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.635904 Jy ! Total flux subtracted in 50 components = 0.635904 Jy ! Clean residual min=-0.114530 max=0.339450 Jy/beam ! Clean residual mean=0.000292 rms=0.027952 Jy/beam ! Combined flux in latest and established models = 4.89016 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 19 components and 4.89016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.261595Jy sigma=22.150484 ! Fit after self-cal, rms=2.261146Jy sigma=22.144077 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.435977 Jy ! Total flux subtracted in 50 components = 0.435977 Jy ! Clean residual min=-0.115630 max=0.266995 Jy/beam ! Clean residual mean=0.000226 rms=0.025739 Jy/beam ! Combined flux in latest and established models = 5.32614 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 22 components and 5.32614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.068966Jy sigma=19.703393 ! Fit after self-cal, rms=2.068320Jy sigma=19.698187 ! Inverting map ! Added new window around map position (-0.7, -0.1). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.32501 Jy ! Total flux subtracted in 50 components = 0.32501 Jy ! Clean residual min=-0.117561 max=0.189344 Jy/beam ! Clean residual mean=0.000174 rms=0.024324 Jy/beam ! Combined flux in latest and established models = 5.65115 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 5.65115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.951212Jy sigma=18.023314 ! Fit after self-cal, rms=1.950130Jy sigma=18.015227 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.252505 Jy ! Total flux subtracted in 50 components = 0.252505 Jy ! Clean residual min=-0.121330 max=0.158173 Jy/beam ! Clean residual mean=0.000133 rms=0.023465 Jy/beam ! Combined flux in latest and established models = 5.90365 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 5.90365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.867505Jy sigma=16.853650 ! Fit after self-cal, rms=1.866562Jy sigma=16.844999 ! Inverting map ! Added new window around map position (-1.3, 0.3). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.204799 Jy ! Total flux subtracted in 50 components = 0.204799 Jy ! Clean residual min=-0.123961 max=0.140123 Jy/beam ! Clean residual mean=0.000099 rms=0.022879 Jy/beam ! Combined flux in latest and established models = 6.10845 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 6.10845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.805465Jy sigma=16.041029 ! Fit after self-cal, rms=1.804763Jy sigma=16.030527 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6438 mas, bmaj=0.9103 mas, bpa=-20.89 degrees ! Estimated noise=0.471916 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.511707 Jy ! Component: 100 - total flux cleaned = 0.801027 Jy ! Total flux subtracted in 100 components = 0.801027 Jy ! Clean residual min=-0.115944 max=0.234594 Jy/beam ! Clean residual mean=0.004403 rms=0.032259 Jy/beam ! Combined flux in latest and established models = 6.90948 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 6.90948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.576936Jy sigma=13.974524 ! Fit after self-cal, rms=1.573862Jy sigma=13.923699 ! Inverting map ! Added new window around map position (-1.9, -0.7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.223281 Jy ! Component: 100 - total flux cleaned = 0.295421 Jy ! Total flux subtracted in 100 components = 0.295421 Jy ! Clean residual min=-0.111031 max=0.185465 Jy/beam ! Clean residual mean=0.003151 rms=0.028826 Jy/beam ! Combined flux in latest and established models = 7.2049 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 85 components and 7.2049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.526092Jy sigma=13.355639 ! Fit after self-cal, rms=1.524327Jy sigma=13.313262 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.99 GC 0.96 HH 1.00* ! HN 0.92 KK 0.83 KP 0.95 LA 0.96 ! MA 1.00* MC 1.00* MK 0.88 NL 0.87 ! NY 1.22 ON 1.00* OV 0.93 PT 0.90 ! SC 1.17 TS 0.99 WF 0.86 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.87 FD 0.86 GC 0.83 HH 1.00* ! HN 1.00* KK 0.97 KP 0.93 LA 1.01 ! MA 1.00* MC 1.00* MK 0.99 NL 1.65 ! NY 1.04 ON 1.26 OV 0.95 PT 1.12 ! SC 1.00* TS 0.84 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.96 GC 0.95 HH 1.00* ! HN 0.91 KK 1.04 KP 0.97 LA 0.95 ! MA 1.00* MC 1.00* MK 0.97 NL 0.95 ! NY 0.66 ON 0.92 OV 0.93 PT 0.94 ! SC 1.00* TS 0.78 WF 0.87 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.11 GC 1.14 HH 1.00* ! HN 1.03 KK 1.10 KP 1.06 LA 0.98 ! MA 1.00* MC 1.15 MK 1.14 NL 0.94 ! NY 1.07 ON 0.95 OV 1.09 PT 1.10 ! SC 1.14 TS 1.00* WF 1.01 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.93 GC 0.94 HH 1.00* ! HN 0.85 KK 0.93 KP 0.92 LA 0.80 ! MA 1.00* MC 1.00* MK 0.75 NL 0.94 ! NY 1.17 ON 1.00* OV 0.90 PT 0.95 ! SC 1.10 TS 0.96 WF 0.75 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 0.96 GC 0.92 HH 1.00* ! HN 1.00* KK 1.00 KP 0.98 LA 1.01 ! MA 1.00* MC 1.00* MK 1.00 NL 1.76 ! NY 1.29 ON 1.21 OV 1.06 PT 1.11 ! SC 1.00* TS 0.80 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 0.97 GC 0.76 HH 1.00* ! HN 0.96 KK 1.04 KP 0.93 LA 0.93 ! MA 1.00* MC 1.00* MK 0.87 NL 0.92 ! NY 0.52 ON 2.22 OV 0.96 PT 0.93 ! SC 1.00* TS 0.78 WF 0.79 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.14 FD 1.14 GC 1.15 HH 1.00* ! HN 1.04 KK 1.18 KP 1.11 LA 1.10 ! MA 1.00* MC 1.10 MK 1.09 NL 1.00 ! NY 1.08 ON 0.90 OV 1.10 PT 1.10 ! SC 1.08 TS 1.00* WF 1.04 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.99 GC 0.85 HH 1.00* ! HN 0.91 KK 0.89 KP 0.83 LA 0.97 ! MA 1.00* MC 1.00* MK 0.74 NL 0.91 ! NY 1.25 ON 1.00* OV 0.88 PT 0.92 ! SC 1.01 TS 0.93 WF 0.71 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.81 FD 1.02 GC 0.82 HH 1.00* ! HN 1.00* KK 1.05 KP 0.93 LA 1.03 ! MA 1.00* MC 1.00* MK 1.03 NL 1.51 ! NY 1.35 ON 0.66 OV 1.05 PT 1.15 ! SC 1.00* TS 0.78 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.98 GC 0.90 HH 1.00* ! HN 0.93 KK 1.00 KP 0.94 LA 0.96 ! MA 1.00* MC 1.00* MK 0.98 NL 0.95 ! NY 0.62 ON 2.27 OV 0.96 PT 0.78 ! SC 1.00* TS 0.76 WF 0.75 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.13 GC 1.17 HH 1.00* ! HN 1.03 KK 1.16 KP 1.12 LA 1.07 ! MA 1.00* MC 1.18 MK 1.20 NL 1.00 ! NY 1.11 ON 0.83 OV 1.00 PT 1.02 ! SC 1.10 TS 1.00* WF 1.08 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 GC 1.01 HH 1.00* ! HN 0.90 KK 0.93 KP 0.91 LA 0.92 ! MA 1.00* MC 1.00* MK 0.79 NL 0.93 ! NY 0.97 ON 1.00* OV 0.86 PT 0.93 ! SC 0.94 TS 0.95 WF 0.77 WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.88 FD 1.00 GC 0.86 HH 1.00* ! HN 1.00* KK 1.03 KP 0.95 LA 1.00 ! MA 1.00* MC 1.00* MK 1.03 NL 1.70 ! NY 1.35 ON 1.20 OV 1.04 PT 1.14 ! SC 1.00* TS 0.77 WF 1.00* WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.78 FD 0.98 GC 0.91 HH 1.00* ! HN 0.94 KK 1.00 KP 0.93 LA 0.94 ! MA 1.00* MC 1.00* MK 0.68 NL 0.99 ! NY 0.89 ON 0.73 OV 0.97 PT 0.93 ! SC 1.00* TS 0.73 WF 0.74 WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.15 GC 1.14 HH 1.00* ! HN 0.99 KK 0.78 KP 1.10 LA 1.06 ! MA 1.00* MC 1.16 MK 1.14 NL 0.84 ! NY 1.11 ON 0.94 OV 1.01 PT 1.12 ! SC 1.06 TS 1.00* WF 1.01 WZ 1.00* ! ! ! Fit before self-cal, rms=1.524327Jy sigma=13.313262 ! Fit after self-cal, rms=0.648547Jy sigma=4.998797 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6528 mas, bmaj=0.9082 mas, bpa=-19.85 degrees ! Estimated noise=0.468912 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.4, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0904417 Jy ! Component: 100 - total flux cleaned = 0.107876 Jy ! Total flux subtracted in 100 components = 0.107876 Jy ! Clean residual min=-0.035148 max=0.054039 Jy/beam ! Clean residual mean=0.001841 rms=0.010100 Jy/beam ! Combined flux in latest and established models = 7.31278 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 96 components and 7.31278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.633098Jy sigma=4.803930 ! Fit after self-cal, rms=0.631507Jy sigma=4.777466 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.6, 2.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442105 Jy ! Component: 100 - total flux cleaned = 0.0496833 Jy ! Total flux subtracted in 100 components = 0.0496833 Jy ! Clean residual min=-0.035638 max=0.048279 Jy/beam ! Clean residual mean=0.001627 rms=0.009810 Jy/beam ! Combined flux in latest and established models = 7.36246 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 106 components and 7.36246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.624332Jy sigma=4.702800 ! Fit after self-cal, rms=0.493655Jy sigma=3.087963 ! Inverting map and beam ! Estimated beam: bmin=0.6485 mas, bmaj=0.9081 mas, bpa=-18.81 degrees ! Estimated noise=0.469927 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0531005 Jy ! Component: 100 - total flux cleaned = 0.0663288 Jy ! Total flux subtracted in 100 components = 0.0663288 Jy ! Clean residual min=-0.025334 max=0.039896 Jy/beam ! Clean residual mean=0.001170 rms=0.006036 Jy/beam ! Combined flux in latest and established models = 7.42879 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 116 components and 7.42879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.484069Jy sigma=2.985218 ! Fit after self-cal, rms=0.471072Jy sigma=2.925779 ! Inverting map and beam ! Estimated beam: bmin=0.6469 mas, bmaj=0.9059 mas, bpa=-18.44 degrees ! Estimated noise=0.470734 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0474982 Jy ! Component: 100 - total flux cleaned = 0.0591345 Jy ! Total flux subtracted in 100 components = 0.0591344 Jy ! Clean residual min=-0.022000 max=0.036348 Jy/beam ! Clean residual mean=0.001077 rms=0.005680 Jy/beam ! Combined flux in latest and established models = 7.48792 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 7.48792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.463344Jy sigma=2.849007 ! Fit after self-cal, rms=0.452900Jy sigma=2.807020 ! Inverting map and beam ! Estimated beam: bmin=0.6455 mas, bmaj=0.904 mas, bpa=-18.14 degrees ! Estimated noise=0.471801 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460836 Jy ! Component: 100 - total flux cleaned = 0.0538873 Jy ! Total flux subtracted in 100 components = 0.0538873 Jy ! Clean residual min=-0.020359 max=0.033917 Jy/beam ! Clean residual mean=0.001031 rms=0.005406 Jy/beam ! Combined flux in latest and established models = 7.54181 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 121 components and 7.54181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446472Jy sigma=2.742110 ! Fit after self-cal, rms=0.436869Jy sigma=2.708102 ! Inverting map and beam ! Estimated beam: bmin=0.6444 mas, bmaj=0.9021 mas, bpa=-17.88 degrees ! Estimated noise=0.472826 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427428 Jy ! Component: 100 - total flux cleaned = 0.0488602 Jy ! Total flux subtracted in 100 components = 0.0488602 Jy ! Clean residual min=-0.019232 max=0.031689 Jy/beam ! Clean residual mean=0.000991 rms=0.005168 Jy/beam ! Combined flux in latest and established models = 7.59067 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 123 components and 7.59067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.431300Jy sigma=2.650605 ! Fit after self-cal, rms=0.422365Jy sigma=2.622025 ! Inverting map and beam ! Estimated beam: bmin=0.6434 mas, bmaj=0.9003 mas, bpa=-17.64 degrees ! Estimated noise=0.473717 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410752 Jy ! Component: 100 - total flux cleaned = 0.0455824 Jy ! Total flux subtracted in 100 components = 0.0455824 Jy ! Clean residual min=-0.019316 max=0.029242 Jy/beam ! Clean residual mean=0.000944 rms=0.004948 Jy/beam ! Combined flux in latest and established models = 7.63625 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 124 components and 7.63625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417493Jy sigma=2.569387 ! Fit after self-cal, rms=0.409403Jy sigma=2.544955 ! Inverting map and beam ! Estimated beam: bmin=0.6425 mas, bmaj=0.8986 mas, bpa=-17.44 degrees ! Estimated noise=0.474522 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383657 Jy ! Component: 100 - total flux cleaned = 0.0415542 Jy ! Total flux subtracted in 100 components = 0.0415542 Jy ! Clean residual min=-0.020033 max=0.027876 Jy/beam ! Clean residual mean=0.000898 rms=0.004749 Jy/beam ! Combined flux in latest and established models = 7.67781 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 127 components and 7.67781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.405145Jy sigma=2.496569 ! Fit after self-cal, rms=0.397625Jy sigma=2.475528 ! Inverting map and beam ! Estimated beam: bmin=0.6417 mas, bmaj=0.897 mas, bpa=-17.24 degrees ! Estimated noise=0.475212 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0347975 Jy ! Component: 100 - total flux cleaned = 0.0378765 Jy ! Total flux subtracted in 100 components = 0.0378765 Jy ! Clean residual min=-0.020529 max=0.026271 Jy/beam ! Clean residual mean=0.000854 rms=0.004566 Jy/beam ! Combined flux in latest and established models = 7.71568 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 128 components and 7.71568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.393866Jy sigma=2.431288 ! Fit after self-cal, rms=0.387087Jy sigma=2.413583 ! Inverting map and beam ! Estimated beam: bmin=0.641 mas, bmaj=0.8955 mas, bpa=-17.06 degrees ! Estimated noise=0.475798 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0325154 Jy ! Component: 100 - total flux cleaned = 0.0354 Jy ! Total flux subtracted in 100 components = 0.0354 Jy ! Clean residual min=-0.021176 max=0.025281 Jy/beam ! Clean residual mean=0.000806 rms=0.004400 Jy/beam ! Combined flux in latest and established models = 7.75108 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 128 components and 7.75108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.383765Jy sigma=2.373388 ! Fit after self-cal, rms=0.377699Jy sigma=2.357929 ! Inverting map and beam ! Estimated beam: bmin=0.6404 mas, bmaj=0.8941 mas, bpa=-16.9 degrees ! Estimated noise=0.476373 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294675 Jy ! Component: 100 - total flux cleaned = 0.0322228 Jy ! Total flux subtracted in 100 components = 0.0322228 Jy ! Clean residual min=-0.021349 max=0.025631 Jy/beam ! Clean residual mean=0.000764 rms=0.004249 Jy/beam ! Combined flux in latest and established models = 7.78331 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 129 components and 7.78331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374735Jy sigma=2.321105 ! Fit after self-cal, rms=0.369360Jy sigma=2.307693 ! Inverting map and beam ! Estimated beam: bmin=0.6399 mas, bmaj=0.8929 mas, bpa=-16.75 degrees ! Estimated noise=0.476951 mJy/beam. ! Added new window around map position (0.8, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344027 Jy ! Component: 100 - total flux cleaned = 0.0402949 Jy ! Total flux subtracted in 100 components = 0.0402949 Jy ! Clean residual min=-0.022667 max=0.021023 Jy/beam ! Clean residual mean=0.000681 rms=0.004053 Jy/beam ! Combined flux in latest and established models = 7.8236 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 135 components and 7.8236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.366012Jy sigma=2.260644 ! Fit after self-cal, rms=0.361356Jy sigma=2.242330 ! Inverting map and beam ! Estimated beam: bmin=0.6396 mas, bmaj=0.892 mas, bpa=-16.7 degrees ! Estimated noise=0.477499 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0289891 Jy ! Component: 100 - total flux cleaned = 0.0325453 Jy ! Total flux subtracted in 100 components = 0.0325453 Jy ! Clean residual min=-0.022286 max=0.020388 Jy/beam ! Clean residual mean=0.000580 rms=0.003883 Jy/beam ! Combined flux in latest and established models = 7.85614 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 138 components and 7.85614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358808Jy sigma=2.202812 ! Fit after self-cal, rms=0.354424Jy sigma=2.189763 ! Inverting map and beam ! Estimated beam: bmin=0.6393 mas, bmaj=0.891 mas, bpa=-16.61 degrees ! Estimated noise=0.478057 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258014 Jy ! Component: 100 - total flux cleaned = 0.0282791 Jy ! Total flux subtracted in 100 components = 0.0282791 Jy ! Clean residual min=-0.022148 max=0.019740 Jy/beam ! Clean residual mean=0.000514 rms=0.003747 Jy/beam ! Combined flux in latest and established models = 7.88442 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 140 components and 7.88442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352231Jy sigma=2.154628 ! Fit after self-cal, rms=0.348161Jy sigma=2.143601 ! Inverting map and beam ! Estimated beam: bmin=0.6391 mas, bmaj=0.8901 mas, bpa=-16.52 degrees ! Estimated noise=0.478611 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.023371 Jy ! Component: 100 - total flux cleaned = 0.0257284 Jy ! Total flux subtracted in 100 components = 0.0257284 Jy ! Clean residual min=-0.022145 max=0.019199 Jy/beam ! Clean residual mean=0.000468 rms=0.003628 Jy/beam ! Combined flux in latest and established models = 7.91015 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 145 components and 7.91015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.346219Jy sigma=2.111797 ! Fit after self-cal, rms=0.342418Jy sigma=2.102147 ! Inverting map and beam ! Estimated beam: bmin=0.6389 mas, bmaj=0.8892 mas, bpa=-16.43 degrees ! Estimated noise=0.479162 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0213156 Jy ! Component: 100 - total flux cleaned = 0.0235585 Jy ! Total flux subtracted in 100 components = 0.0235585 Jy ! Clean residual min=-0.021984 max=0.018733 Jy/beam ! Clean residual mean=0.000432 rms=0.003522 Jy/beam ! Combined flux in latest and established models = 7.93371 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 149 components and 7.93371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.340629Jy sigma=2.073430 ! Fit after self-cal, rms=0.337077Jy sigma=2.064843 ! Inverting map and beam ! Estimated beam: bmin=0.6387 mas, bmaj=0.8884 mas, bpa=-16.34 degrees ! Estimated noise=0.479687 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194861 Jy ! Component: 100 - total flux cleaned = 0.0216718 Jy ! Total flux subtracted in 100 components = 0.0216718 Jy ! Clean residual min=-0.021791 max=0.018274 Jy/beam ! Clean residual mean=0.000404 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 7.95538 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 153 components and 7.95538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335393Jy sigma=2.038772 ! Fit after self-cal, rms=0.332063Jy sigma=2.031223 ! Inverting map and beam ! Estimated beam: bmin=0.6385 mas, bmaj=0.8876 mas, bpa=-16.25 degrees ! Estimated noise=0.480166 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0185789 Jy ! Component: 100 - total flux cleaned = 0.019979 Jy ! Total flux subtracted in 100 components = 0.019979 Jy ! Clean residual min=-0.021504 max=0.017808 Jy/beam ! Clean residual mean=0.000378 rms=0.003332 Jy/beam ! Combined flux in latest and established models = 7.97536 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 154 components and 7.97536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.330516Jy sigma=2.006834 ! Fit after self-cal, rms=0.327455Jy sigma=2.000109 ! Inverting map and beam ! Estimated beam: bmin=0.6383 mas, bmaj=0.8868 mas, bpa=-16.16 degrees ! Estimated noise=0.48061 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177632 Jy ! Component: 100 - total flux cleaned = 0.0184337 Jy ! Total flux subtracted in 100 components = 0.0184337 Jy ! Clean residual min=-0.021235 max=0.017309 Jy/beam ! Clean residual mean=0.000357 rms=0.003243 Jy/beam ! Combined flux in latest and established models = 7.99379 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 156 components and 7.99379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.326030Jy sigma=1.977387 ! Fit after self-cal, rms=0.323155Jy sigma=1.971257 ! Inverting map and beam ! Estimated beam: bmin=0.6381 mas, bmaj=0.8861 mas, bpa=-16.07 degrees ! Estimated noise=0.481016 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163376 Jy ! Component: 100 - total flux cleaned = 0.0176298 Jy ! Total flux subtracted in 100 components = 0.0176298 Jy ! Clean residual min=-0.020960 max=0.016843 Jy/beam ! Clean residual mean=0.000336 rms=0.003162 Jy/beam ! Combined flux in latest and established models = 8.01142 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 156 components and 8.01142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321846Jy sigma=1.949706 ! Fit after self-cal, rms=0.319130Jy sigma=1.944091 ! Inverting map and beam ! Estimated beam: bmin=0.6379 mas, bmaj=0.8854 mas, bpa=-15.99 degrees ! Estimated noise=0.481384 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156334 Jy ! Component: 100 - total flux cleaned = 0.0162674 Jy ! Total flux subtracted in 100 components = 0.0162674 Jy ! Clean residual min=-0.020657 max=0.016369 Jy/beam ! Clean residual mean=0.000317 rms=0.003085 Jy/beam ! Combined flux in latest and established models = 8.02769 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 159 components and 8.02769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.317910Jy sigma=1.923665 ! Fit after self-cal, rms=0.315412Jy sigma=1.918705 ! Inverting map and beam ! Estimated beam: bmin=0.6377 mas, bmaj=0.8847 mas, bpa=-15.91 degrees ! Estimated noise=0.48173 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143785 Jy ! Component: 100 - total flux cleaned = 0.0149925 Jy ! Total flux subtracted in 100 components = 0.0149925 Jy ! Clean residual min=-0.020297 max=0.015936 Jy/beam ! Clean residual mean=0.000302 rms=0.003010 Jy/beam ! Combined flux in latest and established models = 8.04268 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 159 components and 8.04268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.314277Jy sigma=1.899373 ! Fit after self-cal, rms=0.311944Jy sigma=1.894916 ! Inverting map and beam ! Estimated beam: bmin=0.6375 mas, bmaj=0.8841 mas, bpa=-15.84 degrees ! Estimated noise=0.48206 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138044 Jy ! Component: 100 - total flux cleaned = 0.0143882 Jy ! Total flux subtracted in 100 components = 0.0143882 Jy ! Clean residual min=-0.020019 max=0.015477 Jy/beam ! Clean residual mean=0.000286 rms=0.002939 Jy/beam ! Combined flux in latest and established models = 8.05707 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 159 components and 8.05706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310872Jy sigma=1.876810 ! Fit after self-cal, rms=0.308746Jy sigma=1.872764 ! Inverting map and beam ! Estimated beam: bmin=0.6374 mas, bmaj=0.8835 mas, bpa=-15.77 degrees ! Estimated noise=0.482385 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126968 Jy ! Component: 100 - total flux cleaned = 0.0138363 Jy ! Total flux subtracted in 100 components = 0.0138363 Jy ! Clean residual min=-0.019631 max=0.015062 Jy/beam ! Clean residual mean=0.000271 rms=0.002871 Jy/beam ! Combined flux in latest and established models = 8.0709 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 162 components and 8.0709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307778Jy sigma=1.855096 ! Fit after self-cal, rms=0.305752Jy sigma=1.851297 ! Inverting map and beam ! Estimated beam: bmin=0.6373 mas, bmaj=0.8829 mas, bpa=-15.71 degrees ! Estimated noise=0.482702 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122252 Jy ! Component: 100 - total flux cleaned = 0.0127811 Jy ! Total flux subtracted in 100 components = 0.0127811 Jy ! Clean residual min=-0.019164 max=0.014659 Jy/beam ! Clean residual mean=0.000259 rms=0.002805 Jy/beam ! Combined flux in latest and established models = 8.08368 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 162 components and 8.08368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304829Jy sigma=1.834482 ! Fit after self-cal, rms=0.302984Jy sigma=1.831028 ! Inverting map and beam ! Estimated beam: bmin=0.6372 mas, bmaj=0.8824 mas, bpa=-15.66 degrees ! Estimated noise=0.483028 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118267 Jy ! Component: 100 - total flux cleaned = 0.0118249 Jy ! Total flux subtracted in 100 components = 0.0118249 Jy ! Clean residual min=-0.018901 max=0.014258 Jy/beam ! Clean residual mean=0.000248 rms=0.002742 Jy/beam ! Combined flux in latest and established models = 8.09551 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 162 components and 8.09551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.302118Jy sigma=1.814956 ! Fit after self-cal, rms=0.300806Jy sigma=1.794601 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 4C39.25_X ! Writing UV FITS file: 4C39.25_X.uvf ! Writing 162 model components to file: 4C39.25_X.mod ! wwins: Wrote 7 windows to 4C39.25_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6372 x 0.8824 at -15.66 degrees (North through East) ! Clean map min=-0.010053 max=4.7736 Jy/beam ! Writing clean map to FITS file: 4C39.25_X.fits ! Writing difmap environment to: 4C39.25_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 4C39.25_X] device 4C39.25_Xuv.ps/vps,1,2 ! Attempting to open device: '4C39.25_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 4C39.25_Xim.ps/vps ! Attempting to open device: '4C39.25_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=0.6372 mas, bmaj=0.8824 mas, bpa=-15.66 degrees ! Estimated noise=0.483028 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6372 x 0.8824 at -15.66 degrees (North through East) ! Clean map min=-0.010053 max=4.7736 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo7-0.1] quit ! Quitting program ! Log file 4C39.25_X.log closed on Thu Jun 12 14:25:19 2008