! Started logfile: 2234+282_X.log on Fri Jul 11 11:24:26 2008
observe 2234+282_X.edt
! Reading UV FITS file: 2234+282_X.edt
! AN table 1: 80 integrations on 190 of 190 possible baselines.
! Apparent sampling: 0.185526 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 2234+282
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1472 lines of history.
! 
! Reading 11280 visibilities.
![@gonzo6-0.1 2234+282_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1269 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1260 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1260 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1272 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.337991Jy  sigma=6.500540
! Fit after  self-cal, rms=0.334984Jy  sigma=6.495411
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.526 mas, bmaj=0.9535 mas, bpa=3.012 degrees
! Estimated noise=0.79778 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.546471 Jy
! Total flux subtracted in 50 components = 0.546471 Jy
! Clean residual min=-0.030546 max=0.152895 Jy/beam
! Clean residual mean=-0.000378 rms=0.009351 Jy/beam
! Combined flux in latest and established models = 0.546471 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.546471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.326710Jy  sigma=4.868316
! Fit after  self-cal, rms=0.326729Jy  sigma=4.868207
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.157387 Jy
! Total flux subtracted in 50 components = 0.157387 Jy
! Clean residual min=-0.017937 max=0.069544 Jy/beam
! Clean residual mean=-0.000148 rms=0.005190 Jy/beam
! Combined flux in latest and established models = 0.703858 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 7 components and 0.703858 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.239680Jy  sigma=2.907693
! Fit after  self-cal, rms=0.239668Jy  sigma=2.907010
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0746414 Jy
! Total flux subtracted in 50 components = 0.0746414 Jy
! Clean residual min=-0.014116 max=0.033244 Jy/beam
! Clean residual mean=-0.000039 rms=0.003796 Jy/beam
! Combined flux in latest and established models = 0.778499 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 7 components and 0.778499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210772Jy  sigma=2.344002
! Fit after  self-cal, rms=0.210781Jy  sigma=2.343523
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360749 Jy
! Total flux subtracted in 50 components = 0.0360749 Jy
! Clean residual min=-0.014512 max=0.016430 Jy/beam
! Clean residual mean=0.000013 rms=0.003482 Jy/beam
! Combined flux in latest and established models = 0.814574 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.814574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200834Jy  sigma=2.242280
! Fit after  self-cal, rms=0.200830Jy  sigma=2.241767
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6178 mas, bmaj=1.069 mas, bpa=0.7184 degrees
! Estimated noise=0.576739 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0261205 Jy
! Component: 100  -  total flux cleaned = 0.0370567 Jy
! Total flux subtracted in 100 components = 0.0370567 Jy
! Clean residual min=-0.012958 max=0.014038 Jy/beam
! Clean residual mean=0.000870 rms=0.003355 Jy/beam
! Combined flux in latest and established models = 0.851631 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.851631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.193573Jy  sigma=2.285528
! Fit after  self-cal, rms=0.193565Jy  sigma=2.285299
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     GC        1.04     HH        1.00*    
!   HN        1.03     KK        0.94     KP        1.08     LA        1.06     
!   MA        1.00*    MC        1.00*    MK        1.03     NL        1.02     
!   NY        0.83     ON        1.00*    OV        0.97     PT        1.04     
!   SC        1.13     TS        0.95     WF        0.81     WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.11     GC        1.03     HH        1.00*    
!   HN        1.00     KK        0.66     KP        1.08     LA        1.07     
!   MA        1.00*    MC        1.00*    MK        0.96     NL        1.00     
!   NY        1.11     ON        1.00*    OV        0.95     PT        0.97     
!   SC        1.18     TS        1.01     WF        0.76     WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     GC        1.08     HH        1.00*    
!   HN        1.09     KK        0.75     KP        1.11     LA        0.98     
!   MA        1.00*    MC        1.00*    MK        1.05     NL        1.03     
!   NY        1.08     ON        1.00*    OV        0.94     PT        1.05     
!   SC        0.98     TS        0.96     WF        0.77     WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     GC        1.08     HH        1.00*    
!   HN        1.11     KK        0.80     KP        1.04     LA        1.05     
!   MA        1.00*    MC        1.00*    MK        1.01     NL        1.07     
!   NY        0.85     ON        1.00*    OV        0.84     PT        0.93     
!   SC        1.14     TS        0.94     WF        0.83     WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.193565Jy  sigma=2.285299
! Fit after  self-cal, rms=0.126644Jy  sigma=1.513747
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6123 mas, bmaj=1.061 mas, bpa=-0.4416 degrees
! Estimated noise=0.568718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202233 Jy
! Component: 100  -  total flux cleaned = 0.024705 Jy
! Total flux subtracted in 100 components = 0.024705 Jy
! Clean residual min=-0.006704 max=0.009999 Jy/beam
! Clean residual mean=0.000398 rms=0.001878 Jy/beam
! Combined flux in latest and established models = 0.876336 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 21 components and 0.876336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122287Jy  sigma=1.474853
! Fit after  self-cal, rms=0.122268Jy  sigma=1.474540
! Inverting map 
! Added new window around map position (-5.2, -3.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00768944 Jy
! Component: 100  -  total flux cleaned = 0.00993123 Jy
! Total flux subtracted in 100 components = 0.00993123 Jy
! Clean residual min=-0.007167 max=0.008901 Jy/beam
! Clean residual mean=0.000383 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 0.886267 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.886267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121075Jy  sigma=1.469821
! Fit after  self-cal, rms=0.121061Jy  sigma=1.468717
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.3, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0078686 Jy
! Component: 100  -  total flux cleaned = 0.009416 Jy
! Total flux subtracted in 100 components = 0.009416 Jy
! Clean residual min=-0.006577 max=0.008372 Jy/beam
! Clean residual mean=0.000375 rms=0.001691 Jy/beam
! Combined flux in latest and established models = 0.895683 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 0.895683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120152Jy  sigma=1.457680
! Fit after  self-cal, rms=0.115423Jy  sigma=1.332350
! Inverting map and beam 
! Estimated beam: bmin=0.6059 mas, bmaj=1.057 mas, bpa=-0.841 degrees
! Estimated noise=0.567745 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115447 Jy
! Component: 100  -  total flux cleaned = 0.0130814 Jy
! Total flux subtracted in 100 components = 0.0130814 Jy
! Clean residual min=-0.004539 max=0.006036 Jy/beam
! Clean residual mean=0.000245 rms=0.001280 Jy/beam
! Combined flux in latest and established models = 0.908764 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 41 components and 0.908764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113854Jy  sigma=1.315715
! Fit after  self-cal, rms=0.113093Jy  sigma=1.296449
! Inverting map and beam 
! Estimated beam: bmin=0.6041 mas, bmaj=1.054 mas, bpa=-0.9889 degrees
! Estimated noise=0.568062 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00726612 Jy
! Component: 100  -  total flux cleaned = 0.00828647 Jy
! Total flux subtracted in 100 components = 0.00828647 Jy
! Clean residual min=-0.004279 max=0.005301 Jy/beam
! Clean residual mean=0.000195 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.917051 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 48 components and 0.917051 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112285Jy  sigma=1.288300
! Fit after  self-cal, rms=0.111967Jy  sigma=1.280868
! Inverting map and beam 
! Estimated beam: bmin=0.603 mas, bmaj=1.051 mas, bpa=-1.059 degrees
! Estimated noise=0.568501 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00545892 Jy
! Component: 100  -  total flux cleaned = 0.00618084 Jy
! Total flux subtracted in 100 components = 0.00618084 Jy
! Clean residual min=-0.004136 max=0.004937 Jy/beam
! Clean residual mean=0.000165 rms=0.001057 Jy/beam
! Combined flux in latest and established models = 0.923232 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.923232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111458Jy  sigma=1.275553
! Fit after  self-cal, rms=0.111263Jy  sigma=1.271594
! Inverting map and beam 
! Estimated beam: bmin=0.6023 mas, bmaj=1.049 mas, bpa=-1.078 degrees
! Estimated noise=0.569028 mJy/beam.
! Added new window around map position (-8.2, 10.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00589251 Jy
! Component: 100  -  total flux cleaned = 0.00788053 Jy
! Total flux subtracted in 100 components = 0.00788053 Jy
! Clean residual min=-0.003897 max=0.004409 Jy/beam
! Clean residual mean=0.000138 rms=0.000992 Jy/beam
! Combined flux in latest and established models = 0.931112 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 59 components and 0.931112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110817Jy  sigma=1.267188
! Fit after  self-cal, rms=0.110743Jy  sigma=1.264472
! Inverting map and beam 
! Estimated beam: bmin=0.6018 mas, bmaj=1.047 mas, bpa=-1.077 degrees
! Estimated noise=0.569684 mJy/beam.
! Added new window around map position (2.2, 5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00526078 Jy
! Component: 100  -  total flux cleaned = 0.00687748 Jy
! Total flux subtracted in 100 components = 0.00687748 Jy
! Clean residual min=-0.003766 max=0.004164 Jy/beam
! Clean residual mean=0.000119 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.937989 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 64 components and 0.937989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110397Jy  sigma=1.260543
! Fit after  self-cal, rms=0.110384Jy  sigma=1.258532
! Inverting map and beam 
! Estimated beam: bmin=0.6014 mas, bmaj=1.046 mas, bpa=-1.073 degrees
! Estimated noise=0.570285 mJy/beam.
! Added new window around map position (-2.6, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00484846 Jy
! Component: 100  -  total flux cleaned = 0.00633506 Jy
! Total flux subtracted in 100 components = 0.00633506 Jy
! Clean residual min=-0.003872 max=0.003970 Jy/beam
! Clean residual mean=0.000105 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.944324 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 71 components and 0.944324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110097Jy  sigma=1.254957
! Fit after  self-cal, rms=0.110068Jy  sigma=1.253476
! Inverting map and beam 
! Estimated beam: bmin=0.6011 mas, bmaj=1.045 mas, bpa=-1.065 degrees
! Estimated noise=0.570871 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00366048 Jy
! Component: 100  -  total flux cleaned = 0.00418121 Jy
! Total flux subtracted in 100 components = 0.00418121 Jy
! Clean residual min=-0.003804 max=0.003898 Jy/beam
! Clean residual mean=0.000094 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.948506 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 80 components and 0.948506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109859Jy  sigma=1.250897
! Fit after  self-cal, rms=0.109841Jy  sigma=1.250458
! Inverting map 
! Added new window around map position (14.3, -23.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00244069 Jy
! Component: 100  -  total flux cleaned = 0.00279791 Jy
! Total flux subtracted in 100 components = 0.00279791 Jy
! Clean residual min=-0.003719 max=0.003846 Jy/beam
! Clean residual mean=0.000083 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.951304 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 0.951303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109651Jy  sigma=1.248312
! Fit after  self-cal, rms=0.109657Jy  sigma=1.248146
! Inverting map 
! Added new window around map position (1.8, -2.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187856 Jy
! Component: 100  -  total flux cleaned = 0.0021069 Jy
! Total flux subtracted in 100 components = 0.0021069 Jy
! Clean residual min=-0.003612 max=0.003652 Jy/beam
! Clean residual mean=0.000080 rms=0.000842 Jy/beam
! Combined flux in latest and established models = 0.95341 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 93 components and 0.95341 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109468Jy  sigma=1.245582
! Fit after  self-cal, rms=0.109465Jy  sigma=1.245417
! Inverting map 
! Added new window around map position (6.7, -10.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024035 Jy
! Component: 100  -  total flux cleaned = 0.0028313 Jy
! Total flux subtracted in 100 components = 0.0028313 Jy
! Clean residual min=-0.003412 max=0.003444 Jy/beam
! Clean residual mean=0.000072 rms=0.000819 Jy/beam
! Combined flux in latest and established models = 0.956242 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 100 components and 0.956242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109319Jy  sigma=1.243600
! Fit after  self-cal, rms=0.109328Jy  sigma=1.243475
! Inverting map 
! Added new window around map position (-0.3, -6.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102102 Jy
! Component: 100  -  total flux cleaned = 0.00163351 Jy
! Total flux subtracted in 100 components = 0.00163351 Jy
! Clean residual min=-0.003415 max=0.003101 Jy/beam
! Clean residual mean=0.000068 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 0.957875 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 109 components and 0.957875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109179Jy  sigma=1.241019
! Fit after  self-cal, rms=0.109187Jy  sigma=1.240905
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 2234+282_X
! Writing UV FITS file: 2234+282_X.uvf
! Writing 109 model components to file: 2234+282_X.mod
! wwins: Wrote 10 windows to 2234+282_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6011 x 1.045 at -1.065 degrees (North through East)
! Clean map  min=-0.0033853  max=0.72615 Jy/beam
! Writing clean map to FITS file: 2234+282_X.fits
! Writing difmap environment to: 2234+282_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 2234+282_X]
device 2234+282_Xuv.ps/vps,1,2
! Attempting to open device: '2234+282_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 2234+282_Xim.ps/vps
! Attempting to open device: '2234+282_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.6011 mas, bmaj=1.045 mas, bpa=-1.065 degrees
! Estimated noise=0.570871 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6011 x 1.045 at -1.065 degrees (North through East)
! Clean map  min=-0.0033853  max=0.72615 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.1]
quit
! Quitting program
! Log file 2234+282_X.log closed on Fri Jul 11 11:24:42 2008