! Started logfile: 1803+784_X.log on Thu Jul 10 13:30:33 2008 observe 1803+784_X.edt ! Reading UV FITS file: 1803+784_X.edt ! AN table 1: 153 integrations on 190 of 190 possible baselines. ! AN table 2: 149 integrations on 190 of 190 possible baselines. ! AN table 3: 35 integrations on 190 of 190 possible baselines. ! AN table 4: 42 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.29607 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1803+784 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1473 lines of history. ! ! Reading 85280 visibilities. ![@gonzo5-0.1 1803+784_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1786 telescope corrections were flagged in sub-array 1. ! A total of 2076 telescope corrections were flagged in sub-array 2. ! A total of 426 telescope corrections were flagged in sub-array 3. ! A total of 564 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1786 telescope corrections were flagged in sub-array 1. ! A total of 2071 telescope corrections were flagged in sub-array 2. ! A total of 421 telescope corrections were flagged in sub-array 3. ! A total of 552 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1786 telescope corrections were flagged in sub-array 1. ! A total of 2065 telescope corrections were flagged in sub-array 2. ! A total of 421 telescope corrections were flagged in sub-array 3. ! A total of 604 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1815 telescope corrections were flagged in sub-array 1. ! A total of 2065 telescope corrections were flagged in sub-array 2. ! A total of 434 telescope corrections were flagged in sub-array 3. ! A total of 603 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.735881Jy sigma=9.994672 ! Fit after self-cal, rms=0.731930Jy sigma=9.998890 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5115 mas, bmaj=0.578 mas, bpa=-68.79 degrees ! Estimated noise=0.468143 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.04291 Jy ! Total flux subtracted in 50 components = 1.04291 Jy ! Clean residual min=-0.036215 max=0.291349 Jy/beam ! Clean residual mean=-0.000156 rms=0.009115 Jy/beam ! Combined flux in latest and established models = 1.04291 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1.04291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.708189Jy sigma=9.568729 ! Fit after self-cal, rms=0.708188Jy sigma=9.568720 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.255622 Jy ! Total flux subtracted in 50 components = 0.255622 Jy ! Clean residual min=-0.037836 max=0.121856 Jy/beam ! Clean residual mean=-0.000106 rms=0.007431 Jy/beam ! Combined flux in latest and established models = 1.29854 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.29854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.608686Jy sigma=7.694487 ! Fit after self-cal, rms=0.607988Jy sigma=7.690904 ! Inverting map ! Added new window around map position (-1.3, 0.1). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136011 Jy ! Total flux subtracted in 50 components = 0.136011 Jy ! Clean residual min=-0.037569 max=0.070173 Jy/beam ! Clean residual mean=-0.000080 rms=0.006890 Jy/beam ! Combined flux in latest and established models = 1.43455 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 10 components and 1.43455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.575630Jy sigma=7.026619 ! Fit after self-cal, rms=0.573791Jy sigma=7.007825 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0914087 Jy ! Total flux subtracted in 50 components = 0.0914087 Jy ! Clean residual min=-0.036437 max=0.048952 Jy/beam ! Clean residual mean=-0.000062 rms=0.006604 Jy/beam ! Combined flux in latest and established models = 1.52596 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 12 components and 1.52596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.558243Jy sigma=6.687277 ! Fit after self-cal, rms=0.557239Jy sigma=6.677687 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0647183 Jy ! Total flux subtracted in 50 components = 0.0647183 Jy ! Clean residual min=-0.035422 max=0.035875 Jy/beam ! Clean residual mean=-0.000049 rms=0.006456 Jy/beam ! Combined flux in latest and established models = 1.59067 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 1.59067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.549341Jy sigma=6.516480 ! Fit after self-cal, rms=0.548774Jy sigma=6.511099 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469038 Jy ! Total flux subtracted in 50 components = 0.0469038 Jy ! Clean residual min=-0.034460 max=0.035050 Jy/beam ! Clean residual mean=-0.000040 rms=0.006379 Jy/beam ! Combined flux in latest and established models = 1.63758 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 1.63758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.544762Jy sigma=6.432424 ! Fit after self-cal, rms=0.544459Jy sigma=6.429795 ! Inverting map ! Added new window around map position (-2, -1.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0392121 Jy ! Total flux subtracted in 50 components = 0.0392121 Jy ! Clean residual min=-0.033764 max=0.030984 Jy/beam ! Clean residual mean=-0.000033 rms=0.006322 Jy/beam ! Combined flux in latest and established models = 1.67679 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 28 components and 1.67679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.542244Jy sigma=6.372500 ! Fit after self-cal, rms=0.542091Jy sigma=6.370396 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6653 mas, bmaj=0.7758 mas, bpa=-80.29 degrees ! Estimated noise=0.23483 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487754 Jy ! Component: 100 - total flux cleaned = 0.0615152 Jy ! Total flux subtracted in 100 components = 0.0615152 Jy ! Clean residual min=-0.039531 max=0.036917 Jy/beam ! Clean residual mean=0.000065 rms=0.008889 Jy/beam ! Combined flux in latest and established models = 1.73831 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 52 components and 1.73831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.538446Jy sigma=6.264881 ! Fit after self-cal, rms=0.537996Jy sigma=6.252922 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.69 FD 1.05 GC 1.00 HH 1.00* ! HN 1.02 KK 0.95 KP 1.01 LA 1.05 ! MA 1.00* MC 1.00* MK 0.97 NL 1.15 ! NY 1.06 ON 1.00* OV 1.05 PT 1.03 ! SC 1.22 TS 0.93 WF 0.91 WZ 1.00* ! ! A total of 96 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 1.05 GC 1.07 HH 1.00* ! HN 0.89 KK 1.06 KP 1.07 LA 0.97 ! MA 0.84 MC 0.70 MK 0.74 NL 0.81 ! NY 1.12 ON 1.07 OV 0.96 PT 0.94 ! SC 0.87 TS 0.99 WF 0.56 WZ 1.05 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.54 FD 1.05 GC 1.04 HH 1.00* ! HN 0.92 KK 1.24 KP 1.04 LA 0.92 ! MA 0.76 MC 0.94 MK 1.03 NL 1.00 ! NY 0.47 ON 3.88 OV 1.03 PT 0.97 ! SC 1.11 TS 0.91 WF 0.83 WZ 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.79 FD 1.14 GC 1.18 HH 1.00* ! HN 15.68 KK 1.23 KP 1.09 LA 0.99 ! MA 1.00* MC 1.13 MK 1.27 NL 1.72 ! NY 1.21 ON 1.53 OV 1.41 PT 1.12 ! SC 1.17 TS 1.00* WF 3.92 WZ 1.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.63 FD 0.97 GC 1.01 HH 1.00* ! HN 0.97 KK 1.06 KP 0.97 LA 0.88 ! MA 1.00* MC 1.00* MK 0.83 NL 1.26 ! NY 0.97 ON 1.00* OV 1.01 PT 1.09 ! SC 1.19 TS 0.92 WF 0.77 WZ 1.00* ! ! A total of 96 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.23 FD 1.05 GC 1.12 HH 1.00* ! HN 0.91 KK 1.07 KP 1.05 LA 1.03 ! MA 0.85 MC 0.45 MK 0.70 NL 0.81 ! NY 1.11 ON 2.21 OV 0.96 PT 0.86 ! SC 0.84 TS 0.98 WF 0.67 WZ 1.06 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.50 FD 1.05 GC 0.85 HH 1.00* ! HN 0.99 KK 1.23 KP 0.98 LA 0.90 ! MA 0.74 MC 0.93 MK 0.92 NL 0.97 ! NY 0.42 ON 1.10 OV 1.05 PT 0.98 ! SC 1.10 TS 0.90 WF 0.76 WZ 1.02 ! ! A total of 15 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.85 FD 1.16 GC 1.23 HH 1.00* ! HN 12.11 KK 1.14 KP 1.15 LA 1.10 ! MA 1.00* MC 1.06 MK 1.16 NL 1.89 ! NY 1.18 ON 1.68 OV 1.42 PT 1.13 ! SC 1.16 TS 1.00* WF 3.49 WZ 1.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 1.05 GC 0.88 HH 1.00* ! HN 1.01 KK 1.01 KP 0.88 LA 1.05 ! MA 1.00* MC 1.00* MK 0.81 NL 1.26 ! NY 1.01 ON 1.00* OV 1.01 PT 1.06 ! SC 1.10 TS 0.90 WF 0.74 WZ 1.00* ! ! A total of 96 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.95 FD 1.12 GC 1.01 HH 1.00* ! HN 0.77 KK 1.05 KP 1.06 LA 1.05 ! MA 0.93 MC 0.63 MK 0.90 NL 0.82 ! NY 1.13 ON 2.71 OV 0.87 PT 1.05 ! SC 0.94 TS 0.97 WF 0.56 WZ 0.96 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.53 FD 1.07 GC 0.97 HH 1.00* ! HN 0.93 KK 1.21 KP 0.99 LA 0.92 ! MA 0.86 MC 0.99 MK 1.03 NL 0.98 ! NY 0.45 ON 1.11 OV 1.05 PT 0.82 ! SC 1.16 TS 0.90 WF 0.70 WZ 1.02 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.77 FD 1.18 GC 1.20 HH 1.00* ! HN 12.17 KK 1.22 KP 1.17 LA 1.09 ! MA 1.00* MC 1.16 MK 1.28 NL 1.81 ! NY 1.33 ON 0.79 OV 1.33 PT 1.02 ! SC 1.19 TS 1.00* WF 3.85 WZ 1.00* ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.64 FD 1.01 GC 1.03 HH 1.00* ! HN 1.02 KK 1.06 KP 0.96 LA 1.01 ! MA 1.00* MC 1.00* MK 0.87 NL 1.26 ! NY 0.77 ON 1.00* OV 0.95 PT 1.06 ! SC 1.00 TS 0.92 WF 0.83 WZ 1.00* ! ! A total of 96 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 1.17 GC 1.09 HH 1.00* ! HN 0.72 KK 1.04 KP 1.05 LA 0.94 ! MA 1.00 MC 0.52 MK 0.74 NL 0.79 ! NY 1.17 ON 2.25 OV 0.88 PT 1.01 ! SC 0.89 TS 0.97 WF 0.72 WZ 1.02 ! ! A total of 27 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.43 FD 1.06 GC 0.97 HH 1.00* ! HN 1.00* KK 1.16 KP 0.99 LA 0.90 ! MA 0.93 MC 1.05 MK 0.71 NL 1.04 ! NY 0.60 ON 3.31 OV 1.05 PT 0.96 ! SC 1.24 TS 0.92 WF 0.74 WZ 1.04 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.73 FD 1.21 GC 1.19 HH 1.00* ! HN 11.57 KK 0.84 KP 1.15 LA 1.08 ! MA 1.00* MC 1.17 MK 1.23 NL 1.53 ! NY 1.52 ON 0.64 OV 1.34 PT 1.14 ! SC 1.10 TS 1.00* WF 3.83 WZ 1.00* ! ! ! Fit before self-cal, rms=0.537996Jy sigma=6.252922 ! Fit after self-cal, rms=1.437282Jy sigma=3.597375 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6553 mas, bmaj=0.77 mas, bpa=-78.35 degrees ! Estimated noise=0.236116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150948 Jy ! Component: 100 - total flux cleaned = 0.0202145 Jy ! Total flux subtracted in 100 components = 0.0202145 Jy ! Clean residual min=-0.027922 max=0.022475 Jy/beam ! Clean residual mean=0.000261 rms=0.005570 Jy/beam ! Combined flux in latest and established models = 1.75852 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 60 components and 1.75852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.436890Jy sigma=3.565444 ! Fit after self-cal, rms=1.439361Jy sigma=3.561615 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611764 Jy ! Component: 100 - total flux cleaned = 0.00858462 Jy ! Total flux subtracted in 100 components = 0.00858462 Jy ! Clean residual min=-0.028066 max=0.022133 Jy/beam ! Clean residual mean=0.000265 rms=0.005555 Jy/beam ! Combined flux in latest and established models = 1.7671 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 1.7671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.439183Jy sigma=3.550040 ! Fit after self-cal, rms=1.613986Jy sigma=1.652822 ! Inverting map and beam ! Estimated beam: bmin=0.6526 mas, bmaj=0.7625 mas, bpa=-77.74 degrees ! Estimated noise=0.236164 mJy/beam. ! Added new window around map position (-0.3, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203127 Jy ! Component: 100 - total flux cleaned = 0.0241785 Jy ! Total flux subtracted in 100 components = 0.0241785 Jy ! Clean residual min=-0.006642 max=0.010804 Jy/beam ! Clean residual mean=0.000266 rms=0.001382 Jy/beam ! Combined flux in latest and established models = 1.79128 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 1.79128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.613622Jy sigma=1.611148 ! Fit after self-cal, rms=1.568981Jy sigma=1.583608 ! Inverting map and beam ! Estimated beam: bmin=0.6505 mas, bmaj=0.7595 mas, bpa=-77.72 degrees ! Estimated noise=0.236425 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149203 Jy ! Component: 100 - total flux cleaned = 0.0181224 Jy ! Total flux subtracted in 100 components = 0.0181224 Jy ! Clean residual min=-0.005914 max=0.010474 Jy/beam ! Clean residual mean=0.000226 rms=0.001290 Jy/beam ! Combined flux in latest and established models = 1.80941 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 1.80941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.568739Jy sigma=1.556171 ! Fit after self-cal, rms=1.610664Jy sigma=1.543157 ! Inverting map and beam ! Estimated beam: bmin=0.6488 mas, bmaj=0.7574 mas, bpa=-77.66 degrees ! Estimated noise=0.236627 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116948 Jy ! Component: 100 - total flux cleaned = 0.0142228 Jy ! Total flux subtracted in 100 components = 0.0142228 Jy ! Clean residual min=-0.005640 max=0.010283 Jy/beam ! Clean residual mean=0.000206 rms=0.001229 Jy/beam ! Combined flux in latest and established models = 1.82363 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 1.82363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.610494Jy sigma=1.522812 ! Fit after self-cal, rms=1.699039Jy sigma=1.515511 ! Inverting map and beam ! Estimated beam: bmin=0.6474 mas, bmaj=0.7558 mas, bpa=-77.59 degrees ! Estimated noise=0.236839 mJy/beam. ! Added new window around map position (-3.2, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130766 Jy ! Component: 100 - total flux cleaned = 0.0180645 Jy ! Total flux subtracted in 100 components = 0.0180645 Jy ! Clean residual min=-0.005674 max=0.007530 Jy/beam ! Clean residual mean=0.000195 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 1.84169 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 89 components and 1.84169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.698868Jy sigma=1.492868 ! Fit after self-cal, rms=2.059705Jy sigma=1.487340 ! Inverting map and beam ! Estimated beam: bmin=0.6465 mas, bmaj=0.7547 mas, bpa=-77.58 degrees ! Estimated noise=0.237075 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00987866 Jy ! Component: 100 - total flux cleaned = 0.0125592 Jy ! Total flux subtracted in 100 components = 0.0125592 Jy ! Clean residual min=-0.005124 max=0.007357 Jy/beam ! Clean residual mean=0.000184 rms=0.001055 Jy/beam ! Combined flux in latest and established models = 1.85425 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 92 components and 1.85425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.059602Jy sigma=1.471899 ! Fit after self-cal, rms=4.047771Jy sigma=1.468258 ! Inverting map and beam ! Estimated beam: bmin=0.6456 mas, bmaj=0.7536 mas, bpa=-77.55 degrees ! Estimated noise=0.237248 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785575 Jy ! Component: 100 - total flux cleaned = 0.0103027 Jy ! Total flux subtracted in 100 components = 0.0103027 Jy ! Clean residual min=-0.004717 max=0.007213 Jy/beam ! Clean residual mean=0.000175 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 1.86456 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 95 components and 1.86456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.047725Jy sigma=1.455520 ! Fit after self-cal, rms=12.004949Jy sigma=1.452857 ! Inverting map and beam ! Estimated beam: bmin=0.6447 mas, bmaj=0.7526 mas, bpa=-77.51 degrees ! Estimated noise=0.237377 mJy/beam. ! Added new window around map position (0.1, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00740027 Jy ! Component: 100 - total flux cleaned = 0.00997127 Jy ! Total flux subtracted in 100 components = 0.00997127 Jy ! Clean residual min=-0.004391 max=0.007021 Jy/beam ! Clean residual mean=0.000169 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 1.87453 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 101 components and 1.87453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=12.004944Jy sigma=1.441181 ! Fit after self-cal, rms=39.313759Jy sigma=1.438846 ! Inverting map and beam ! Estimated beam: bmin=0.6439 mas, bmaj=0.7517 mas, bpa=-77.48 degrees ! Estimated noise=0.237472 mJy/beam. ! Added new window around map position (-5.4, 0.1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00844546 Jy ! Component: 100 - total flux cleaned = 0.0114926 Jy ! Total flux subtracted in 100 components = 0.0114926 Jy ! Clean residual min=-0.004248 max=0.005890 Jy/beam ! Clean residual mean=0.000162 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 1.88602 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 115 components and 1.88602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=39.313751Jy sigma=1.427073 ! Fit after self-cal, rms=131.154663Jy sigma=1.425319 ! Inverting map and beam ! Estimated beam: bmin=0.6432 mas, bmaj=0.7509 mas, bpa=-77.43 degrees ! Estimated noise=0.237584 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00587172 Jy ! Component: 100 - total flux cleaned = 0.00862671 Jy ! Total flux subtracted in 100 components = 0.00862671 Jy ! Clean residual min=-0.003967 max=0.005733 Jy/beam ! Clean residual mean=0.000157 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 1.89465 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 120 components and 1.89465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=131.154648Jy sigma=1.416719 ! Fit after self-cal, rms=438.245575Jy sigma=1.415337 ! Inverting map and beam ! Estimated beam: bmin=0.6426 mas, bmaj=0.7502 mas, bpa=-77.38 degrees ! Estimated noise=0.237649 mJy/beam. ! Added new window around map position (-2.7, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00567397 Jy ! Component: 100 - total flux cleaned = 0.00826369 Jy ! Total flux subtracted in 100 components = 0.00826369 Jy ! Clean residual min=-0.003736 max=0.005585 Jy/beam ! Clean residual mean=0.000154 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 1.90291 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 1.90291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=438.245575Jy sigma=1.407737 ! Fit after self-cal, rms=1458.518311Jy sigma=1.406446 ! Inverting map and beam ! Estimated beam: bmin=0.642 mas, bmaj=0.7495 mas, bpa=-77.34 degrees ! Estimated noise=0.237712 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00431452 Jy ! Component: 100 - total flux cleaned = 0.00674173 Jy ! Total flux subtracted in 100 components = 0.00674173 Jy ! Clean residual min=-0.003467 max=0.005443 Jy/beam ! Clean residual mean=0.000149 rms=0.000774 Jy/beam ! Combined flux in latest and established models = 1.90965 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 1.90965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1458.518311Jy sigma=1.400304 ! Fit after self-cal, rms=4829.251465Jy sigma=1.399345 ! Inverting map and beam ! Estimated beam: bmin=0.6415 mas, bmaj=0.7489 mas, bpa=-77.29 degrees ! Estimated noise=0.237758 mJy/beam. ! Added new window around map position (-7.3, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00634608 Jy ! Component: 100 - total flux cleaned = 0.00874345 Jy ! Total flux subtracted in 100 components = 0.00874345 Jy ! Clean residual min=-0.003439 max=0.004452 Jy/beam ! Clean residual mean=0.000145 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 1.91839 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 139 components and 1.91839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4829.251465Jy sigma=1.392635 ! Fit after self-cal, rms=15992.422852Jy sigma=1.391943 ! Inverting map and beam ! Estimated beam: bmin=0.641 mas, bmaj=0.7485 mas, bpa=-77.25 degrees ! Estimated noise=0.237814 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037515 Jy ! Component: 100 - total flux cleaned = 0.00613052 Jy ! Total flux subtracted in 100 components = 0.00613052 Jy ! Clean residual min=-0.003148 max=0.004249 Jy/beam ! Clean residual mean=0.000145 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 1.92452 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 142 components and 1.92453 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=15992.422852Jy sigma=1.387024 ! Fit after self-cal, rms=52667.988281Jy sigma=1.386410 ! Inverting map and beam ! Estimated beam: bmin=0.6406 mas, bmaj=0.7481 mas, bpa=-77.21 degrees ! Estimated noise=0.237841 mJy/beam. ! Added new window around map position (1.4, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360565 Jy ! Component: 100 - total flux cleaned = 0.00584656 Jy ! Total flux subtracted in 100 components = 0.00584656 Jy ! Clean residual min=-0.002987 max=0.003790 Jy/beam ! Clean residual mean=0.000144 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 1.93037 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 148 components and 1.93037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=52667.988281Jy sigma=1.381450 ! Fit after self-cal, rms=172452.312500Jy sigma=1.380865 ! Inverting map and beam ! Estimated beam: bmin=0.6402 mas, bmaj=0.7476 mas, bpa=-77.17 degrees ! Estimated noise=0.237839 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271314 Jy ! Component: 100 - total flux cleaned = 0.00499131 Jy ! Total flux subtracted in 100 components = 0.00499131 Jy ! Clean residual min=-0.002808 max=0.003635 Jy/beam ! Clean residual mean=0.000139 rms=0.000631 Jy/beam ! Combined flux in latest and established models = 1.93536 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 150 components and 1.93536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=172452.312500Jy sigma=1.376899 ! Fit after self-cal, rms=561639.625000Jy sigma=1.376418 ! Inverting map and beam ! Estimated beam: bmin=0.6397 mas, bmaj=0.7472 mas, bpa=-77.14 degrees ! Estimated noise=0.237824 mJy/beam. ! Added new window around map position (-1.7, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256658 Jy ! Component: 100 - total flux cleaned = 0.00405311 Jy ! Total flux subtracted in 100 components = 0.00405311 Jy ! Clean residual min=-0.002677 max=0.003585 Jy/beam ! Clean residual mean=0.000136 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 1.93942 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 156 components and 1.93942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=561639.625000Jy sigma=1.373113 ! Fit after self-cal, rms=1821028.375000Jy sigma=1.372736 ! Inverting map and beam ! Estimated beam: bmin=0.6394 mas, bmaj=0.7468 mas, bpa=-77.12 degrees ! Estimated noise=0.237814 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219503 Jy ! Component: 100 - total flux cleaned = 0.00360918 Jy ! Total flux subtracted in 100 components = 0.00360918 Jy ! Clean residual min=-0.002556 max=0.003529 Jy/beam ! Clean residual mean=0.000133 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 1.94302 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 165 components and 1.94303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1821028.375000Jy sigma=1.369747 ! Fit after self-cal, rms=5874882.500000Jy sigma=1.369448 ! Inverting map and beam ! Estimated beam: bmin=0.6391 mas, bmaj=0.7465 mas, bpa=-77.1 degrees ! Estimated noise=0.237789 mJy/beam. ! Added new window around map position (-9.1, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360059 Jy ! Component: 100 - total flux cleaned = 0.00499928 Jy ! Total flux subtracted in 100 components = 0.00499928 Jy ! Clean residual min=-0.002491 max=0.002967 Jy/beam ! Clean residual mean=0.000130 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 1.94802 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 180 components and 1.94802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5874882.500000Jy sigma=1.366170 ! Fit after self-cal, rms=18913982.000000Jy sigma=1.365953 ! Inverting map and beam ! Estimated beam: bmin=0.6388 mas, bmaj=0.7462 mas, bpa=-77.08 degrees ! Estimated noise=0.237781 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181064 Jy ! Component: 100 - total flux cleaned = 0.00312334 Jy ! Total flux subtracted in 100 components = 0.00312334 Jy ! Clean residual min=-0.002307 max=0.002806 Jy/beam ! Clean residual mean=0.000129 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 1.95115 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 183 components and 1.95115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=18913982.000000Jy sigma=1.363403 ! Fit after self-cal, rms=60662792.000000Jy sigma=1.363208 ! Inverting map and beam ! Estimated beam: bmin=0.6385 mas, bmaj=0.7459 mas, bpa=-77.06 degrees ! Estimated noise=0.237747 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155856 Jy ! Component: 100 - total flux cleaned = 0.00266104 Jy ! Total flux subtracted in 100 components = 0.00266104 Jy ! Clean residual min=-0.002198 max=0.002727 Jy/beam ! Clean residual mean=0.000128 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 1.95381 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 186 components and 1.95381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=60662792.000000Jy sigma=1.360918 ! Fit after self-cal, rms=193841696.000000Jy sigma=1.360726 ! Inverting map and beam ! Estimated beam: bmin=0.6382 mas, bmaj=0.7455 mas, bpa=-77.04 degrees ! Estimated noise=0.237703 mJy/beam. ! Added new window around map position (-6.2, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165364 Jy ! Component: 100 - total flux cleaned = 0.00270489 Jy ! Total flux subtracted in 100 components = 0.00270489 Jy ! Clean residual min=-0.002137 max=0.002536 Jy/beam ! Clean residual mean=0.000127 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 1.95651 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 189 components and 1.95651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=193841696.000000Jy sigma=1.358678 ! Fit after self-cal, rms=616873600.000000Jy sigma=1.358505 ! Inverting map and beam ! Estimated beam: bmin=0.638 mas, bmaj=0.7452 mas, bpa=-77.02 degrees ! Estimated noise=0.237653 mJy/beam. ! Added new window around map position (-1.5, 1.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141404 Jy ! Component: 100 - total flux cleaned = 0.00229906 Jy ! Total flux subtracted in 100 components = 0.00229906 Jy ! Clean residual min=-0.002027 max=0.002466 Jy/beam ! Clean residual mean=0.000126 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 1.95881 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 196 components and 1.95881 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=616873600.000000Jy sigma=1.356655 ! Fit after self-cal, rms=1956558720.000000Jy sigma=1.356520 ! Inverting map and beam ! Estimated beam: bmin=0.6378 mas, bmaj=0.745 mas, bpa=-77 degrees ! Estimated noise=0.237596 mJy/beam. ! Added new window around map position (-4.1, 0.7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122981 Jy ! Component: 100 - total flux cleaned = 0.0019596 Jy ! Total flux subtracted in 100 components = 0.0019596 Jy ! Clean residual min=-0.001986 max=0.002406 Jy/beam ! Clean residual mean=0.000125 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 1.96077 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 202 components and 1.96077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1956558720.000000Jy sigma=1.354804 ! Fit after self-cal, rms=6191291904.000000Jy sigma=1.354689 ! Inverting map and beam ! Estimated beam: bmin=0.6375 mas, bmaj=0.7447 mas, bpa=-76.99 degrees ! Estimated noise=0.237542 mJy/beam. ! Added new window around map position (-5.1, -1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119196 Jy ! Component: 100 - total flux cleaned = 0.00189718 Jy ! Total flux subtracted in 100 components = 0.00189718 Jy ! Clean residual min=-0.001922 max=0.002303 Jy/beam ! Clean residual mean=0.000124 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 1.96267 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 211 components and 1.96267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=6191291904.000000Jy sigma=1.353089 ! Fit after self-cal, rms=19523813376.000000Jy sigma=1.352993 ! Inverting map and beam ! Estimated beam: bmin=0.6373 mas, bmaj=0.7445 mas, bpa=-76.97 degrees ! Estimated noise=0.237484 mJy/beam. ! Added new window around map position (-10.4, 0.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113064 Jy ! Component: 100 - total flux cleaned = 0.00170151 Jy ! Total flux subtracted in 100 components = 0.00170151 Jy ! Clean residual min=-0.001860 max=0.002232 Jy/beam ! Clean residual mean=0.000122 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 1.96437 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 215 components and 1.96437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=19523813376.000000Jy sigma=1.351541 ! Fit after self-cal, rms=61337481216.000000Jy sigma=1.351477 ! Inverting map and beam ! Estimated beam: bmin=0.6372 mas, bmaj=0.7443 mas, bpa=-76.96 degrees ! Estimated noise=0.237427 mJy/beam. ! Added new window around map position (-1.4, -1.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000726972 Jy ! Component: 100 - total flux cleaned = 0.0013887 Jy ! Total flux subtracted in 100 components = 0.0013887 Jy ! Clean residual min=-0.001804 max=0.002192 Jy/beam ! Clean residual mean=0.000121 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 1.96576 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 221 components and 1.96576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=61337481216.000000Jy sigma=1.350157 ! Fit after self-cal, rms=192099057664.000000Jy sigma=1.350099 ! Inverting map and beam ! Estimated beam: bmin=0.637 mas, bmaj=0.7441 mas, bpa=-76.94 degrees ! Estimated noise=0.237371 mJy/beam. ! Added new window around map position (-7.7, -2.1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000824621 Jy ! Component: 100 - total flux cleaned = 0.00135863 Jy ! Total flux subtracted in 100 components = 0.00135863 Jy ! Clean residual min=-0.001754 max=0.002047 Jy/beam ! Clean residual mean=0.000120 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 1.96712 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 226 components and 1.96712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=192099057664.000000Jy sigma=1.348828 ! Fit after self-cal, rms=600518361088.000000Jy sigma=1.348778 ! Inverting map and beam ! Estimated beam: bmin=0.6368 mas, bmaj=0.744 mas, bpa=-76.92 degrees ! Estimated noise=0.237313 mJy/beam. ! Added new window around map position (-25.3, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000667893 Jy ! Component: 100 - total flux cleaned = 0.00139524 Jy ! Total flux subtracted in 100 components = 0.00139524 Jy ! Clean residual min=-0.001728 max=0.001934 Jy/beam ! Clean residual mean=0.000118 rms=0.000461 Jy/beam ! Combined flux in latest and established models = 1.96851 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 229 components and 1.96851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=600518361088.000000Jy sigma=1.347609 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.347571 ! Inverting map and beam ! Estimated beam: bmin=0.6367 mas, bmaj=0.7438 mas, bpa=-76.91 degrees ! Estimated noise=0.237252 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311202 Jy ! Component: 100 - total flux cleaned = 0.000910854 Jy ! Total flux subtracted in 100 components = 0.000910854 Jy ! Clean residual min=-0.001707 max=0.001916 Jy/beam ! Clean residual mean=0.000117 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 1.96943 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 233 components and 1.96943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1871720218624.000000Jy sigma=1.346478 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.339326 ! Inverting map ! Added new window around map position (-10.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000918668 Jy ! Component: 100 - total flux cleaned = 0.0014888 Jy ! Total flux subtracted in 100 components = 0.0014888 Jy ! Clean residual min=-0.001656 max=0.001860 Jy/beam ! Clean residual mean=0.000117 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 1.97091 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 236 components and 1.97091 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1871720218624.000000Jy sigma=1.338348 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.338308 ! Inverting map ! Added new window around map position (16.3, -8.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00078454 Jy ! Component: 100 - total flux cleaned = 0.00141442 Jy ! Total flux subtracted in 100 components = 0.00141442 Jy ! Clean residual min=-0.001660 max=0.001769 Jy/beam ! Clean residual mean=0.000116 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 1.97233 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 240 components and 1.97233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1871720218624.000000Jy sigma=1.337464 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.337896 ! Inverting map ! Added new window around map position (23.8, 22.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000922826 Jy ! Component: 100 - total flux cleaned = 0.00143562 Jy ! Total flux subtracted in 100 components = 0.00143562 Jy ! Clean residual min=-0.001643 max=0.001731 Jy/beam ! Clean residual mean=0.000114 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 1.97376 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 248 components and 1.97376 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1871720218624.000000Jy sigma=1.337161 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.337525 ! Inverting map ! Added new window around map position (-9.1, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0008035 Jy ! Component: 100 - total flux cleaned = 0.00129272 Jy ! Total flux subtracted in 100 components = 0.00129272 Jy ! Clean residual min=-0.001651 max=0.001696 Jy/beam ! Clean residual mean=0.000114 rms=0.000422 Jy/beam ! Combined flux in latest and established models = 1.97506 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 259 components and 1.97506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1871720218624.000000Jy sigma=1.336883 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.337144 ! Inverting map ! Added new window around map position (-5.2, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691357 Jy ! Component: 100 - total flux cleaned = 0.00115925 Jy ! Total flux subtracted in 100 components = 0.00115925 Jy ! Clean residual min=-0.001659 max=0.001646 Jy/beam ! Clean residual mean=0.000113 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 1.97622 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 271 components and 1.97622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1871720218624.000000Jy sigma=1.336588 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.336781 ! Inverting map ! Added new window around map position (-11, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000748402 Jy ! Component: 100 - total flux cleaned = 0.00127364 Jy ! Total flux subtracted in 100 components = 0.00127364 Jy ! Clean residual min=-0.001658 max=0.001618 Jy/beam ! Clean residual mean=0.000112 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 1.97749 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 279 components and 1.97749 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1871720218624.000000Jy sigma=1.336161 ! Fit after self-cal, rms=1871720218624.000000Jy sigma=1.336292 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1803+784_X ! Writing UV FITS file: 1803+784_X.uvf ! Writing 279 model components to file: 1803+784_X.mod ! wwins: Wrote 26 windows to 1803+784_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6367 x 0.7438 at -76.91 degrees (North through East) ! Clean map min=-0.0015929 max=1.3392 Jy/beam ! Writing clean map to FITS file: 1803+784_X.fits ! Writing difmap environment to: 1803+784_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1803+784_X] device 1803+784_Xuv.ps/vps,1,2 ! Attempting to open device: '1803+784_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1803+784_Xim.ps/vps ! Attempting to open device: '1803+784_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=0.6367 mas, bmaj=0.7438 mas, bpa=-76.91 degrees ! Estimated noise=0.237252 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6367 x 0.7438 at -76.91 degrees (North through East) ! Clean map min=-0.0015929 max=1.3392 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.1] quit ! Quitting program ! Log file 1803+784_X.log closed on Thu Jul 10 13:31:49 2008