! Started logfile: 0742+103_X.log on Fri Jun 27 16:32:44 2008 observe 0742+103_X.edt ! Reading UV FITS file: 0742+103_X.edt ! AN table 1: 11 integrations on 190 of 190 possible baselines. ! AN table 2: 83 integrations on 190 of 190 possible baselines. ! AN table 3: 94 integrations on 190 of 190 possible baselines. ! AN table 4: 12 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.146711 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0742+103 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1472 lines of history. ! ! Reading 22300 visibilities. ![@gonzo6-0.1 0742+103_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 220 telescope corrections were flagged in sub-array 1. ! A total of 1233 telescope corrections were flagged in sub-array 2. ! A total of 1488 telescope corrections were flagged in sub-array 3. ! A total of 219 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 220 telescope corrections were flagged in sub-array 1. ! A total of 1233 telescope corrections were flagged in sub-array 2. ! A total of 1481 telescope corrections were flagged in sub-array 3. ! A total of 219 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 220 telescope corrections were flagged in sub-array 1. ! A total of 1233 telescope corrections were flagged in sub-array 2. ! A total of 1480 telescope corrections were flagged in sub-array 3. ! A total of 219 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 220 telescope corrections were flagged in sub-array 1. ! A total of 1233 telescope corrections were flagged in sub-array 2. ! A total of 1487 telescope corrections were flagged in sub-array 3. ! A total of 219 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.615324Jy sigma=9.249029 ! Fit after self-cal, rms=0.608651Jy sigma=9.270269 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5095 mas, bmaj=1.378 mas, bpa=-5.289 degrees ! Estimated noise=0.695618 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.596363 Jy ! Total flux subtracted in 50 components = 0.596363 Jy ! Clean residual min=-0.038416 max=0.231735 Jy/beam ! Clean residual mean=-0.000569 rms=0.014376 Jy/beam ! Combined flux in latest and established models = 0.596363 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.596363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.685896Jy sigma=11.261396 ! Fit after self-cal, rms=0.685786Jy sigma=11.259312 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249601 Jy ! Total flux subtracted in 50 components = 0.249601 Jy ! Clean residual min=-0.032048 max=0.124535 Jy/beam ! Clean residual mean=-0.000358 rms=0.010648 Jy/beam ! Combined flux in latest and established models = 0.845964 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.845964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.569163Jy sigma=8.447328 ! Fit after self-cal, rms=0.568854Jy sigma=8.444064 ! Inverting map ! Added new window around map position (-0.6, 0.9). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148928 Jy ! Total flux subtracted in 50 components = 0.148928 Jy ! Clean residual min=-0.028399 max=0.088689 Jy/beam ! Clean residual mean=-0.000236 rms=0.008899 Jy/beam ! Combined flux in latest and established models = 0.994892 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.994892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518962Jy sigma=7.107006 ! Fit after self-cal, rms=0.517260Jy sigma=7.095189 ! Inverting map ! Added new window around map position (0, 1.7). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.108769 Jy ! Total flux subtracted in 50 components = 0.108769 Jy ! Clean residual min=-0.025366 max=0.073316 Jy/beam ! Clean residual mean=-0.000146 rms=0.007764 Jy/beam ! Combined flux in latest and established models = 1.10366 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 1.10366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.486187Jy sigma=6.279778 ! Fit after self-cal, rms=0.484368Jy sigma=6.266077 ! Inverting map ! Added new window around map position (0.8, -1.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0840971 Jy ! Total flux subtracted in 50 components = 0.0840971 Jy ! Clean residual min=-0.022809 max=0.048521 Jy/beam ! Clean residual mean=-0.000079 rms=0.006986 Jy/beam ! Combined flux in latest and established models = 1.18776 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 1.18776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466873Jy sigma=5.772117 ! Fit after self-cal, rms=0.466025Jy sigma=5.768497 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.066946 Jy ! Total flux subtracted in 50 components = 0.066946 Jy ! Clean residual min=-0.021643 max=0.039648 Jy/beam ! Clean residual mean=-0.000026 rms=0.006472 Jy/beam ! Combined flux in latest and established models = 1.2547 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 1.2547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.453544Jy sigma=5.444415 ! Fit after self-cal, rms=0.452813Jy sigma=5.439955 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0554042 Jy ! Total flux subtracted in 50 components = 0.0554042 Jy ! Clean residual min=-0.020992 max=0.032971 Jy/beam ! Clean residual mean=0.000019 rms=0.006099 Jy/beam ! Combined flux in latest and established models = 1.31011 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 1.31011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.443484Jy sigma=5.223581 ! Fit after self-cal, rms=0.442959Jy sigma=5.220270 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6351 mas, bmaj=1.587 mas, bpa=-4.494 degrees ! Estimated noise=0.436103 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0908751 Jy ! Component: 100 - total flux cleaned = 0.148844 Jy ! Total flux subtracted in 100 components = 0.148844 Jy ! Clean residual min=-0.025210 max=0.041363 Jy/beam ! Clean residual mean=0.001278 rms=0.008143 Jy/beam ! Combined flux in latest and established models = 1.45895 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 49 model components to the UV plane model. ! The established model now contains 122 components and 1.45895 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.419128Jy sigma=4.925884 ! Fit after self-cal, rms=0.418060Jy sigma=4.912052 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.45 FD 1.03 GC 1.06 HH 1.00* ! HN 0.94 KK 0.93 KP 1.05 LA 0.96 ! MA 1.00* MC 1.00* MK 0.81 NL 0.92 ! NY 1.00* ON 1.00* OV 0.91 PT 0.94 ! SC 0.91 TS 1.04 WF 0.62 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.58 FD 1.01 GC 1.18 HH 1.00* ! HN 0.91 KK 1.43 KP 1.01 LA 0.87 ! MA 0.76 MC 1.25 MK 1.15 NL 1.05 ! NY 0.65 ON 0.53 OV 0.97 PT 0.91 ! SC 1.05 TS 1.00* WF 0.85 WZ 1.17 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.83 FD 1.01 GC 1.12 HH 1.00* ! HN 1.02 KK 1.01 KP 1.05 LA 0.99 ! MA 1.00* MC 1.00* MK 0.80 NL 0.93 ! NY 1.00* ON 1.00* OV 0.92 PT 0.88 ! SC 0.83 TS 1.00 WF 0.72 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.52 FD 1.02 GC 0.94 HH 1.00* ! HN 0.94 KK 1.38 KP 0.96 LA 0.85 ! MA 0.77 MC 1.26 MK 1.00 NL 1.04 ! NY 0.56 ON 1.35 OV 0.99 PT 0.91 ! SC 1.06 TS 1.00* WF 0.81 WZ 1.14 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.40 FD 1.13 GC 1.02 HH 1.00* ! HN 0.86 KK 0.95 KP 1.08 LA 1.05 ! MA 1.00* MC 1.00* MK 1.01 NL 0.92 ! NY 1.00* ON 1.00* OV 0.84 PT 1.08 ! SC 0.96 TS 0.99 WF 0.62 WZ 1.00* ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.56 FD 1.04 GC 1.10 HH 1.00* ! HN 0.96 KK 1.32 KP 0.98 LA 0.89 ! MA 0.85 MC 1.36 MK 1.03 NL 1.06 ! NY 0.64 ON 1.37 OV 1.02 PT 0.77 ! SC 1.15 TS 1.00* WF 0.79 WZ 1.14 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.91 FD 1.18 GC 1.18 HH 1.00* ! HN 0.77 KK 0.80 KP 1.04 LA 0.94 ! MA 1.00* MC 1.00* MK 0.75 NL 0.90 ! NY 1.00* ON 1.00* OV 0.87 PT 1.06 ! SC 0.90 TS 1.03 WF 0.81 WZ 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.46 FD 1.04 GC 1.14 HH 1.00* ! HN 1.00 KK 1.30 KP 0.97 LA 0.87 ! MA 0.93 MC 1.27 MK 0.86 NL 1.13 ! NY 0.92 ON 0.50 OV 1.01 PT 0.93 ! SC 1.14 TS 1.00* WF 0.83 WZ 1.42 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MA 0.00* MC 0.00* MK 0.00* NL 0.00* ! NY 0.00* ON 0.00* OV 0.00* PT 0.00* ! SC 0.00* TS 0.00* WF 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.418060Jy sigma=4.912052 ! Fit after self-cal, rms=0.220132Jy sigma=2.282291 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6413 mas, bmaj=1.617 mas, bpa=-4.8 degrees ! Estimated noise=0.424043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 1.9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.037125 Jy ! Component: 100 - total flux cleaned = 0.0422716 Jy ! Total flux subtracted in 100 components = 0.0422716 Jy ! Clean residual min=-0.013079 max=0.016113 Jy/beam ! Clean residual mean=0.000619 rms=0.003230 Jy/beam ! Combined flux in latest and established models = 1.50122 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 153 components and 1.50122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212802Jy sigma=2.167937 ! Fit after self-cal, rms=0.211587Jy sigma=2.133861 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00911883 Jy ! Component: 100 - total flux cleaned = 0.0110925 Jy ! Total flux subtracted in 100 components = 0.0110925 Jy ! Clean residual min=-0.012751 max=0.014663 Jy/beam ! Clean residual mean=0.000620 rms=0.003037 Jy/beam ! Combined flux in latest and established models = 1.51232 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 176 components and 1.51232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208491Jy sigma=2.091548 ! Fit after self-cal, rms=0.208054Jy sigma=2.080835 ! Inverting map ! Added new window around map position (-9.2, 15.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00970193 Jy ! Component: 100 - total flux cleaned = 0.0130371 Jy ! Total flux subtracted in 100 components = 0.0130371 Jy ! Clean residual min=-0.012526 max=0.013690 Jy/beam ! Clean residual mean=0.000610 rms=0.002922 Jy/beam ! Combined flux in latest and established models = 1.52535 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 193 components and 1.52535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205969Jy sigma=2.049015 ! Fit after self-cal, rms=0.205803Jy sigma=2.044070 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.9, 3.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00985865 Jy ! Component: 100 - total flux cleaned = 0.0141397 Jy ! Total flux subtracted in 100 components = 0.0141397 Jy ! Clean residual min=-0.012472 max=0.011871 Jy/beam ! Clean residual mean=0.000597 rms=0.002829 Jy/beam ! Combined flux in latest and established models = 1.53949 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 204 components and 1.53949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204249Jy sigma=2.022958 ! Fit after self-cal, rms=0.210982Jy sigma=1.681134 ! Inverting map and beam ! Estimated beam: bmin=0.6349 mas, bmaj=1.622 mas, bpa=-4.974 degrees ! Estimated noise=0.42308 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01961 Jy ! Component: 100 - total flux cleaned = 0.0276154 Jy ! Total flux subtracted in 100 components = 0.0276154 Jy ! Clean residual min=-0.007720 max=0.009254 Jy/beam ! Clean residual mean=0.000449 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 1.56711 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 224 components and 1.56711 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208578Jy sigma=1.647140 ! Fit after self-cal, rms=0.208897Jy sigma=1.615639 ! Inverting map and beam ! Estimated beam: bmin=0.6327 mas, bmaj=1.619 mas, bpa=-5.01 degrees ! Estimated noise=0.422992 mJy/beam. ! Added new window around map position (-0.6, 2.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0161965 Jy ! Component: 100 - total flux cleaned = 0.0212935 Jy ! Total flux subtracted in 100 components = 0.0212935 Jy ! Clean residual min=-0.006824 max=0.007556 Jy/beam ! Clean residual mean=0.000343 rms=0.001510 Jy/beam ! Combined flux in latest and established models = 1.5884 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 234 components and 1.5884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207240Jy sigma=1.589927 ! Fit after self-cal, rms=0.208059Jy sigma=1.572554 ! Inverting map and beam ! Estimated beam: bmin=0.6311 mas, bmaj=1.616 mas, bpa=-5.036 degrees ! Estimated noise=0.422771 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012873 Jy ! Component: 100 - total flux cleaned = 0.0174175 Jy ! Total flux subtracted in 100 components = 0.0174175 Jy ! Clean residual min=-0.006143 max=0.006837 Jy/beam ! Clean residual mean=0.000274 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 1.60582 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 243 components and 1.60582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206840Jy sigma=1.552745 ! Fit after self-cal, rms=0.207553Jy sigma=1.541287 ! Inverting map and beam ! Estimated beam: bmin=0.6295 mas, bmaj=1.614 mas, bpa=-5.049 degrees ! Estimated noise=0.422375 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010353 Jy ! Component: 100 - total flux cleaned = 0.0147587 Jy ! Total flux subtracted in 100 components = 0.0147587 Jy ! Clean residual min=-0.005509 max=0.006235 Jy/beam ! Clean residual mean=0.000226 rms=0.001251 Jy/beam ! Combined flux in latest and established models = 1.62058 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 252 components and 1.62058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206623Jy sigma=1.526056 ! Fit after self-cal, rms=0.207286Jy sigma=1.517828 ! Inverting map and beam ! Estimated beam: bmin=0.6281 mas, bmaj=1.612 mas, bpa=-5.057 degrees ! Estimated noise=0.421899 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00865664 Jy ! Component: 100 - total flux cleaned = 0.0122536 Jy ! Total flux subtracted in 100 components = 0.0122536 Jy ! Clean residual min=-0.004965 max=0.005948 Jy/beam ! Clean residual mean=0.000190 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 1.63283 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 257 components and 1.63283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206556Jy sigma=1.506205 ! Fit after self-cal, rms=0.207154Jy sigma=1.500386 ! Inverting map and beam ! Estimated beam: bmin=0.6269 mas, bmaj=1.609 mas, bpa=-5.059 degrees ! Estimated noise=0.421397 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00727174 Jy ! Component: 100 - total flux cleaned = 0.00991592 Jy ! Total flux subtracted in 100 components = 0.00991592 Jy ! Clean residual min=-0.004419 max=0.005726 Jy/beam ! Clean residual mean=0.000162 rms=0.001090 Jy/beam ! Combined flux in latest and established models = 1.64275 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 266 components and 1.64275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206567Jy sigma=1.491387 ! Fit after self-cal, rms=0.207028Jy sigma=1.487252 ! Inverting map and beam ! Estimated beam: bmin=0.6258 mas, bmaj=1.608 mas, bpa=-5.061 degrees ! Estimated noise=0.420886 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00585202 Jy ! Component: 100 - total flux cleaned = 0.00851488 Jy ! Total flux subtracted in 100 components = 0.00851488 Jy ! Clean residual min=-0.004045 max=0.005588 Jy/beam ! Clean residual mean=0.000140 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 1.65126 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 271 components and 1.65126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206547Jy sigma=1.480229 ! Fit after self-cal, rms=0.206918Jy sigma=1.477247 ! Inverting map and beam ! Estimated beam: bmin=0.6249 mas, bmaj=1.606 mas, bpa=-5.063 degrees ! Estimated noise=0.420414 mJy/beam. ! Added new window around map position (1.7, 2.3). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532619 Jy ! Component: 100 - total flux cleaned = 0.00750377 Jy ! Total flux subtracted in 100 components = 0.00750377 Jy ! Clean residual min=-0.003694 max=0.005454 Jy/beam ! Clean residual mean=0.000123 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 1.65877 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 278 components and 1.65877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206527Jy sigma=1.471336 ! Fit after self-cal, rms=0.206838Jy sigma=1.469032 ! Inverting map and beam ! Estimated beam: bmin=0.6241 mas, bmaj=1.605 mas, bpa=-5.065 degrees ! Estimated noise=0.41995 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00419567 Jy ! Component: 100 - total flux cleaned = 0.00660636 Jy ! Total flux subtracted in 100 components = 0.00660636 Jy ! Clean residual min=-0.003425 max=0.005378 Jy/beam ! Clean residual mean=0.000110 rms=0.000942 Jy/beam ! Combined flux in latest and established models = 1.66537 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 289 components and 1.66537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206518Jy sigma=1.464678 ! Fit after self-cal, rms=0.206813Jy sigma=1.462941 ! Inverting map and beam ! Estimated beam: bmin=0.6235 mas, bmaj=1.603 mas, bpa=-5.068 degrees ! Estimated noise=0.419574 mJy/beam. ! Added new window around map position (3.7, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00449369 Jy ! Component: 100 - total flux cleaned = 0.00701899 Jy ! Total flux subtracted in 100 components = 0.00701899 Jy ! Clean residual min=-0.003429 max=0.004380 Jy/beam ! Clean residual mean=0.000099 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 1.67239 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 297 components and 1.67239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206530Jy sigma=1.457838 ! Fit after self-cal, rms=0.207190Jy sigma=1.456806 ! Inverting map and beam ! Estimated beam: bmin=0.6231 mas, bmaj=1.602 mas, bpa=-5.075 degrees ! Estimated noise=0.419307 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00321897 Jy ! Component: 100 - total flux cleaned = 0.0056873 Jy ! Total flux subtracted in 100 components = 0.0056873 Jy ! Clean residual min=-0.003289 max=0.004303 Jy/beam ! Clean residual mean=0.000089 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 1.67808 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 315 components and 1.67808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206962Jy sigma=1.453523 ! Fit after self-cal, rms=0.207268Jy sigma=1.452674 ! Inverting map and beam ! Estimated beam: bmin=0.6227 mas, bmaj=1.601 mas, bpa=-5.079 degrees ! Estimated noise=0.419006 mJy/beam. ! Added new window around map position (7.8, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00350655 Jy ! Component: 100 - total flux cleaned = 0.00604727 Jy ! Total flux subtracted in 100 components = 0.00604727 Jy ! Clean residual min=-0.003224 max=0.003979 Jy/beam ! Clean residual mean=0.000078 rms=0.000831 Jy/beam ! Combined flux in latest and established models = 1.68413 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 326 components and 1.68413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207061Jy sigma=1.449527 ! Fit after self-cal, rms=0.207232Jy sigma=1.448957 ! Inverting map and beam ! Estimated beam: bmin=0.6224 mas, bmaj=1.6 mas, bpa=-5.083 degrees ! Estimated noise=0.418744 mJy/beam. ! Added new window around map position (-3.6, -1.7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00282718 Jy ! Component: 100 - total flux cleaned = 0.00453476 Jy ! Total flux subtracted in 100 components = 0.00453476 Jy ! Clean residual min=-0.003112 max=0.003868 Jy/beam ! Clean residual mean=0.000071 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 1.68866 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 45 model components to the UV plane model. ! The established model now contains 339 components and 1.68866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207035Jy sigma=1.446274 ! Fit after self-cal, rms=0.207098Jy sigma=1.445845 ! Inverting map and beam ! Estimated beam: bmin=0.6222 mas, bmaj=1.6 mas, bpa=-5.087 degrees ! Estimated noise=0.418499 mJy/beam. ! Added new window around map position (13.7, -12.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287105 Jy ! Component: 100 - total flux cleaned = 0.00432676 Jy ! Total flux subtracted in 100 components = 0.00432676 Jy ! Clean residual min=-0.003067 max=0.003084 Jy/beam ! Clean residual mean=0.000063 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 1.69299 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 347 components and 1.69299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206931Jy sigma=1.443575 ! Fit after self-cal, rms=0.206998Jy sigma=1.443261 ! Inverting map and beam ! Estimated beam: bmin=0.622 mas, bmaj=1.599 mas, bpa=-5.093 degrees ! Estimated noise=0.418255 mJy/beam. ! Added new window around map position (3.2, 2.1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00177441 Jy ! Component: 100 - total flux cleaned = 0.00330631 Jy ! Total flux subtracted in 100 components = 0.00330631 Jy ! Clean residual min=-0.002946 max=0.002941 Jy/beam ! Clean residual mean=0.000059 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 1.69629 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 359 components and 1.69629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206852Jy sigma=1.441362 ! Fit after self-cal, rms=0.206642Jy sigma=1.441115 ! Inverting map and beam ! Estimated beam: bmin=0.6218 mas, bmaj=1.598 mas, bpa=-5.097 degrees ! Estimated noise=0.417968 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131053 Jy ! Component: 100 - total flux cleaned = 0.00276114 Jy ! Total flux subtracted in 100 components = 0.00276114 Jy ! Clean residual min=-0.002868 max=0.002906 Jy/beam ! Clean residual mean=0.000055 rms=0.000741 Jy/beam ! Combined flux in latest and established models = 1.69905 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 51 model components to the UV plane model. ! The established model now contains 371 components and 1.69905 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206511Jy sigma=1.439539 ! Fit after self-cal, rms=0.205396Jy sigma=1.428046 ! Inverting map ! Added new window around map position (-2.1, 4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154074 Jy ! Component: 100 - total flux cleaned = 0.00314385 Jy ! Total flux subtracted in 100 components = 0.00314385 Jy ! Clean residual min=-0.002703 max=0.002697 Jy/beam ! Clean residual mean=0.000053 rms=0.000720 Jy/beam ! Combined flux in latest and established models = 1.7022 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 383 components and 1.7022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205271Jy sigma=1.426847 ! Fit after self-cal, rms=0.204944Jy sigma=1.426185 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0742+103_X ! Writing UV FITS file: 0742+103_X.uvf ! Writing 383 model components to file: 0742+103_X.mod ! wwins: Wrote 15 windows to 0742+103_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6218 x 1.598 at -5.097 degrees (North through East) ! Clean map min=-0.0027289 max=0.76642 Jy/beam ! Writing clean map to FITS file: 0742+103_X.fits ! Writing difmap environment to: 0742+103_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0742+103_X] device 0742+103_Xuv.ps/vps,1,2 ! Attempting to open device: '0742+103_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0742+103_Xim.ps/vps ! Attempting to open device: '0742+103_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=0.6218 mas, bmaj=1.598 mas, bpa=-5.097 degrees ! Estimated noise=0.417968 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6218 x 1.598 at -5.097 degrees (North through East) ! Clean map min=-0.0027289 max=0.76642 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.1] quit ! Quitting program ! Log file 0742+103_X.log closed on Fri Jun 27 16:33:20 2008