! Started logfile: 0528+134_X.log on Fri Jun 27 11:58:53 2008
observe 0528+134_X.edt
! Reading UV FITS file: 0528+134_X.edt
! AN table 1: 146 integrations on 190 of 190 possible baselines.
! Apparent sampling: 0.181146 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0528+134
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1475 lines of history.
! 
! Reading 20100 visibilities.
![@gonzo6-0.1 0528+134_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2199 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2198 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2229 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.932288Jy  sigma=25.266295
! Fit after  self-cal, rms=1.919608Jy  sigma=25.276992
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5926 mas, bmaj=1.244 mas, bpa=-4.494 degrees
! Estimated noise=0.993463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.03401 Jy
! Total flux subtracted in 50 components = 2.03401 Jy
! Clean residual min=-0.091813 max=0.567400 Jy/beam
! Clean residual mean=0.000182 rms=0.026651 Jy/beam
! Combined flux in latest and established models = 2.03401 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 2.03401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.999314Jy  sigma=11.203489
! Fit after  self-cal, rms=0.999319Jy  sigma=11.203493
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.443555 Jy
! Total flux subtracted in 50 components = 0.443555 Jy
! Clean residual min=-0.063769 max=0.123998 Jy/beam
! Clean residual mean=0.000497 rms=0.016342 Jy/beam
! Combined flux in latest and established models = 2.47756 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 2.47756 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.708349Jy  sigma=6.933889
! Fit after  self-cal, rms=0.708367Jy  sigma=6.933899
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.118921 Jy
! Total flux subtracted in 50 components = 0.118921 Jy
! Clean residual min=-0.065162 max=0.089632 Jy/beam
! Clean residual mean=0.000581 rms=0.015551 Jy/beam
! Combined flux in latest and established models = 2.59648 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 2.59648 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.665100Jy  sigma=6.414608
! Fit after  self-cal, rms=0.664564Jy  sigma=6.411207
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7211 mas, bmaj=1.495 mas, bpa=-9.22 degrees
! Estimated noise=0.643615 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141584 Jy
! Component: 100  -  total flux cleaned = 0.200275 Jy
! Total flux subtracted in 100 components = 0.200275 Jy
! Clean residual min=-0.056229 max=0.081892 Jy/beam
! Clean residual mean=0.009490 rms=0.018093 Jy/beam
! Combined flux in latest and established models = 2.79676 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 2.79676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.618150Jy  sigma=6.145773
! Fit after  self-cal, rms=0.616900Jy  sigma=6.134354
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        1.03     GC        1.06     HH        1.00*    
!   HN        1.04     KK        1.06     KP        1.05     LA        1.09     
!   MA        1.00*    MC        1.00*    MK        1.11     NL        1.05     
!   NY        0.82     ON        1.00*    OV        0.97     PT        1.06     
!   SC        0.96     TS        1.01     WF        0.85     WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.09     GC        1.05     HH        1.00*    
!   HN        0.97     KK        0.71     KP        1.06     LA        1.07     
!   MA        1.00*    MC        1.00*    MK        1.00     NL        1.03     
!   NY        1.12     ON        1.00*    OV        0.95     PT        1.00     
!   SC        1.07     TS        1.01     WF        0.79     WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.03     GC        1.08     HH        1.00*    
!   HN        0.97     KK        0.77     KP        1.07     LA        0.99     
!   MA        1.00*    MC        1.00*    MK        1.01     NL        1.01     
!   NY        1.04     ON        1.00*    OV        0.91     PT        1.07     
!   SC        0.86     TS        0.94     WF        0.75     WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.00     GC        1.05     HH        1.00*    
!   HN        0.99     KK        0.83     KP        1.02     LA        1.03     
!   MA        1.00*    MC        1.00*    MK        1.03     NL        1.07     
!   NY        0.76     ON        1.00*    OV        0.80     PT        1.02     
!   SC        1.00     TS        0.96     WF        0.81     WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.616900Jy  sigma=6.134354
! Fit after  self-cal, rms=0.372799Jy  sigma=3.936794
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7098 mas, bmaj=1.496 mas, bpa=-9.319 degrees
! Estimated noise=0.638164 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 1.1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0848569 Jy
! Component: 100  -  total flux cleaned = 0.118815 Jy
! Total flux subtracted in 100 components = 0.118815 Jy
! Clean residual min=-0.029369 max=0.053711 Jy/beam
! Clean residual mean=0.003791 rms=0.010070 Jy/beam
! Combined flux in latest and established models = 2.91557 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 31 components and 2.91557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.349979Jy  sigma=3.653576
! Fit after  self-cal, rms=0.347077Jy  sigma=3.616711
! Inverting map 
! Added new window around map position (4.3, 8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0404914 Jy
! Component: 100  -  total flux cleaned = 0.0531633 Jy
! Total flux subtracted in 100 components = 0.0531633 Jy
! Clean residual min=-0.029318 max=0.045821 Jy/beam
! Clean residual mean=0.003483 rms=0.009056 Jy/beam
! Combined flux in latest and established models = 2.96873 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 44 components and 2.96873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.335358Jy  sigma=3.502006
! Fit after  self-cal, rms=0.334441Jy  sigma=3.487480
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.4, -0.1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0255308 Jy
! Component: 100  -  total flux cleaned = 0.0340564 Jy
! Total flux subtracted in 100 components = 0.0340564 Jy
! Clean residual min=-0.026510 max=0.036189 Jy/beam
! Clean residual mean=0.003282 rms=0.008587 Jy/beam
! Combined flux in latest and established models = 3.00279 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 53 components and 3.00279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.325447Jy  sigma=3.398192
! Fit after  self-cal, rms=0.222154Jy  sigma=2.026162
! Inverting map and beam 
! Estimated beam: bmin=0.708 mas, bmaj=1.489 mas, bpa=-9.382 degrees
! Estimated noise=0.642441 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0510388 Jy
! Component: 100  -  total flux cleaned = 0.0747338 Jy
! Total flux subtracted in 100 components = 0.0747338 Jy
! Clean residual min=-0.013815 max=0.021260 Jy/beam
! Clean residual mean=0.001779 rms=0.004894 Jy/beam
! Combined flux in latest and established models = 3.07752 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 75 components and 3.07752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.207627Jy  sigma=1.866032
! Fit after  self-cal, rms=0.198958Jy  sigma=1.751210
! Inverting map and beam 
! Estimated beam: bmin=0.705 mas, bmaj=1.485 mas, bpa=-9.455 degrees
! Estimated noise=0.644734 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0385816 Jy
! Component: 100  -  total flux cleaned = 0.055535 Jy
! Total flux subtracted in 100 components = 0.055535 Jy
! Clean residual min=-0.011530 max=0.017986 Jy/beam
! Clean residual mean=0.001407 rms=0.003974 Jy/beam
! Combined flux in latest and established models = 3.13306 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 86 components and 3.13306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.189327Jy  sigma=1.653469
! Fit after  self-cal, rms=0.184365Jy  sigma=1.585439
! Inverting map and beam 
! Estimated beam: bmin=0.7029 mas, bmaj=1.482 mas, bpa=-9.507 degrees
! Estimated noise=0.64657 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0302865 Jy
! Component: 100  -  total flux cleaned = 0.0421724 Jy
! Total flux subtracted in 100 components = 0.0421724 Jy
! Clean residual min=-0.010161 max=0.015456 Jy/beam
! Clean residual mean=0.001177 rms=0.003374 Jy/beam
! Combined flux in latest and established models = 3.17523 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 97 components and 3.17523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177565Jy  sigma=1.521976
! Fit after  self-cal, rms=0.174571Jy  sigma=1.480576
! Inverting map and beam 
! Estimated beam: bmin=0.701 mas, bmaj=1.48 mas, bpa=-9.547 degrees
! Estimated noise=0.648005 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0247701 Jy
! Component: 100  -  total flux cleaned = 0.0320693 Jy
! Total flux subtracted in 100 components = 0.0320693 Jy
! Clean residual min=-0.009245 max=0.013518 Jy/beam
! Clean residual mean=0.001011 rms=0.002946 Jy/beam
! Combined flux in latest and established models = 3.2073 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 3.2073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.169577Jy  sigma=1.436025
! Fit after  self-cal, rms=0.167661Jy  sigma=1.408668
! Inverting map and beam 
! Estimated beam: bmin=0.6994 mas, bmaj=1.479 mas, bpa=-9.572 degrees
! Estimated noise=0.649223 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020724 Jy
! Component: 100  -  total flux cleaned = 0.0243952 Jy
! Total flux subtracted in 100 components = 0.0243952 Jy
! Clean residual min=-0.008373 max=0.012034 Jy/beam
! Clean residual mean=0.000888 rms=0.002625 Jy/beam
! Combined flux in latest and established models = 3.2317 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 104 components and 3.2317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163943Jy  sigma=1.375468
! Fit after  self-cal, rms=0.162654Jy  sigma=1.356461
! Inverting map and beam 
! Estimated beam: bmin=0.6981 mas, bmaj=1.477 mas, bpa=-9.59 degrees
! Estimated noise=0.650274 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0171107 Jy
! Component: 100  -  total flux cleaned = 0.019833 Jy
! Total flux subtracted in 100 components = 0.019833 Jy
! Clean residual min=-0.007627 max=0.011231 Jy/beam
! Clean residual mean=0.000785 rms=0.002380 Jy/beam
! Combined flux in latest and established models = 3.25153 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 108 components and 3.25153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.159789Jy  sigma=1.331560
! Fit after  self-cal, rms=0.158910Jy  sigma=1.318143
! Inverting map and beam 
! Estimated beam: bmin=0.6969 mas, bmaj=1.476 mas, bpa=-9.601 degrees
! Estimated noise=0.651137 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013777 Jy
! Component: 100  -  total flux cleaned = 0.0162531 Jy
! Total flux subtracted in 100 components = 0.0162531 Jy
! Clean residual min=-0.007010 max=0.010433 Jy/beam
! Clean residual mean=0.000699 rms=0.002186 Jy/beam
! Combined flux in latest and established models = 3.26778 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 110 components and 3.26778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156696Jy  sigma=1.299156
! Fit after  self-cal, rms=0.156076Jy  sigma=1.289355
! Inverting map and beam 
! Estimated beam: bmin=0.6959 mas, bmaj=1.475 mas, bpa=-9.609 degrees
! Estimated noise=0.651827 mJy/beam.
! Added new window around map position (-1.5, -3.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0139391 Jy
! Component: 100  -  total flux cleaned = 0.0169481 Jy
! Total flux subtracted in 100 components = 0.0169481 Jy
! Clean residual min=-0.006648 max=0.008928 Jy/beam
! Clean residual mean=0.000605 rms=0.002013 Jy/beam
! Combined flux in latest and established models = 3.28473 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 116 components and 3.28473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154305Jy  sigma=1.271985
! Fit after  self-cal, rms=0.153830Jy  sigma=1.263705
! Inverting map and beam 
! Estimated beam: bmin=0.6952 mas, bmaj=1.475 mas, bpa=-9.619 degrees
! Estimated noise=0.652429 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103698 Jy
! Component: 100  -  total flux cleaned = 0.0123658 Jy
! Total flux subtracted in 100 components = 0.0123658 Jy
! Clean residual min=-0.006255 max=0.008175 Jy/beam
! Clean residual mean=0.000548 rms=0.001888 Jy/beam
! Combined flux in latest and established models = 3.2971 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 122 components and 3.2971 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152498Jy  sigma=1.252004
! Fit after  self-cal, rms=0.152193Jy  sigma=1.246588
! Inverting map and beam 
! Estimated beam: bmin=0.6945 mas, bmaj=1.474 mas, bpa=-9.625 degrees
! Estimated noise=0.652974 mJy/beam.
! Added new window around map position (2.3, 3.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00934526 Jy
! Component: 100  -  total flux cleaned = 0.0109574 Jy
! Total flux subtracted in 100 components = 0.0109574 Jy
! Clean residual min=-0.006076 max=0.007745 Jy/beam
! Clean residual mean=0.000490 rms=0.001791 Jy/beam
! Combined flux in latest and established models = 3.30805 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 129 components and 3.30805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150956Jy  sigma=1.236159
! Fit after  self-cal, rms=0.150774Jy  sigma=1.232015
! Inverting map and beam 
! Estimated beam: bmin=0.6941 mas, bmaj=1.473 mas, bpa=-9.629 degrees
! Estimated noise=0.653519 mJy/beam.
! Added new window around map position (-0.1, -2.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00873516 Jy
! Component: 100  -  total flux cleaned = 0.0104997 Jy
! Total flux subtracted in 100 components = 0.0104997 Jy
! Clean residual min=-0.005870 max=0.007078 Jy/beam
! Clean residual mean=0.000434 rms=0.001687 Jy/beam
! Combined flux in latest and established models = 3.31855 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 135 components and 3.31855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149766Jy  sigma=1.223599
! Fit after  self-cal, rms=0.149579Jy  sigma=1.220432
! Inverting map and beam 
! Estimated beam: bmin=0.6937 mas, bmaj=1.473 mas, bpa=-9.634 degrees
! Estimated noise=0.653986 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00697835 Jy
! Component: 100  -  total flux cleaned = 0.00777227 Jy
! Total flux subtracted in 100 components = 0.00777227 Jy
! Clean residual min=-0.005892 max=0.006735 Jy/beam
! Clean residual mean=0.000395 rms=0.001611 Jy/beam
! Combined flux in latest and established models = 3.32632 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 138 components and 3.32632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148793Jy  sigma=1.213729
! Fit after  self-cal, rms=0.148688Jy  sigma=1.211484
! Inverting map and beam 
! Estimated beam: bmin=0.6933 mas, bmaj=1.472 mas, bpa=-9.638 degrees
! Estimated noise=0.654396 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00573284 Jy
! Component: 100  -  total flux cleaned = 0.00622743 Jy
! Total flux subtracted in 100 components = 0.00622743 Jy
! Clean residual min=-0.005874 max=0.006405 Jy/beam
! Clean residual mean=0.000358 rms=0.001548 Jy/beam
! Combined flux in latest and established models = 3.33255 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 145 components and 3.33255 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148040Jy  sigma=1.205865
! Fit after  self-cal, rms=0.147974Jy  sigma=1.204207
! Inverting map and beam 
! Estimated beam: bmin=0.693 mas, bmaj=1.472 mas, bpa=-9.64 degrees
! Estimated noise=0.654761 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00498669 Jy
! Component: 100  -  total flux cleaned = 0.00521036 Jy
! Total flux subtracted in 100 components = 0.00521036 Jy
! Clean residual min=-0.005864 max=0.006199 Jy/beam
! Clean residual mean=0.000328 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 3.33776 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 151 components and 3.33776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.147424Jy  sigma=1.199443
! Fit after  self-cal, rms=0.147375Jy  sigma=1.198157
! Inverting map and beam 
! Estimated beam: bmin=0.6927 mas, bmaj=1.472 mas, bpa=-9.641 degrees
! Estimated noise=0.655093 mJy/beam.
! Added new window around map position (3.3, -20.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00657186 Jy
! Component: 100  -  total flux cleaned = 0.00725868 Jy
! Total flux subtracted in 100 components = 0.00725868 Jy
! Clean residual min=-0.005558 max=0.005837 Jy/beam
! Clean residual mean=0.000285 rms=0.001406 Jy/beam
! Combined flux in latest and established models = 3.34502 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 160 components and 3.34502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146820Jy  sigma=1.192952
! Fit after  self-cal, rms=0.146778Jy  sigma=1.192034
! Inverting map and beam 
! Estimated beam: bmin=0.6925 mas, bmaj=1.471 mas, bpa=-9.642 degrees
! Estimated noise=0.655389 mJy/beam.
! Added new window around map position (-6.4, -2.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00587237 Jy
! Component: 100  -  total flux cleaned = 0.00695454 Jy
! Total flux subtracted in 100 components = 0.00695454 Jy
! Clean residual min=-0.005265 max=0.005387 Jy/beam
! Clean residual mean=0.000245 rms=0.001358 Jy/beam
! Combined flux in latest and established models = 3.35198 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 170 components and 3.35198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146332Jy  sigma=1.187580
! Fit after  self-cal, rms=0.146310Jy  sigma=1.186906
! Inverting map and beam 
! Estimated beam: bmin=0.6923 mas, bmaj=1.471 mas, bpa=-9.644 degrees
! Estimated noise=0.655666 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00359057 Jy
! Component: 100  -  total flux cleaned = 0.00377982 Jy
! Total flux subtracted in 100 components = 0.00377982 Jy
! Clean residual min=-0.005181 max=0.005278 Jy/beam
! Clean residual mean=0.000237 rms=0.001325 Jy/beam
! Combined flux in latest and established models = 3.35576 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 175 components and 3.35575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145950Jy  sigma=1.183378
! Fit after  self-cal, rms=0.145309Jy  sigma=1.169630
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0528+134_X
! Writing UV FITS file: 0528+134_X.uvf
! Writing 175 model components to file: 0528+134_X.mod
! wwins: Wrote 9 windows to 0528+134_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6923 x 1.471 at -9.644 degrees (North through East)
! Clean map  min=-0.005065  max=2.673 Jy/beam
! Writing clean map to FITS file: 0528+134_X.fits
! Writing difmap environment to: 0528+134_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0528+134_X]
device 0528+134_Xuv.ps/vps,1,2
! Attempting to open device: '0528+134_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0528+134_Xim.ps/vps
! Attempting to open device: '0528+134_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.6923 mas, bmaj=1.471 mas, bpa=-9.644 degrees
! Estimated noise=0.655666 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6923 x 1.471 at -9.644 degrees (North through East)
! Clean map  min=-0.005065  max=2.673 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.1]
quit
! Quitting program
! Log file 0528+134_X.log closed on Fri Jun 27 11:59:20 2008