! Started logfile: 0133+476_X.log on Thu Jun 26 14:41:13 2008
observe 0133+476_X.edt2
! Reading UV FITS file: 0133+476_X.edt2
! AN table 1: 103 integrations on 190 of 190 possible baselines.
! AN table 2: 16 integrations on 190 of 190 possible baselines.
! AN table 3: 72 integrations on 190 of 190 possible baselines.
! AN table 4: 94 integrations on 190 of 190 possible baselines.
! Apparent sampling: 0.259151 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0133+476
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1476 lines of history.
! 
! Reading 56132 visibilities.
![@gonzo6-0.1 0133+476_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1664 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
!  A total of 911 telescope corrections were flagged in sub-array 3.
!  A total of 1082 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 1667 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
!  A total of 921 telescope corrections were flagged in sub-array 3.
!  A total of 1082 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 1667 telescope corrections were flagged in sub-array 1.
!  A total of 217 telescope corrections were flagged in sub-array 2.
!  A total of 900 telescope corrections were flagged in sub-array 3.
!  A total of 1082 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 1669 telescope corrections were flagged in sub-array 1.
!  A total of 213 telescope corrections were flagged in sub-array 2.
!  A total of 908 telescope corrections were flagged in sub-array 3.
!  A total of 1082 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.205051Jy  sigma=19.122897
! Fit after  self-cal, rms=1.202600Jy  sigma=19.137698
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5621 mas, bmaj=0.6762 mas, bpa=4.705 degrees
! Estimated noise=0.618708 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.62281 Jy
! Total flux subtracted in 50 components = 1.62281 Jy
! Clean residual min=-0.051513 max=0.453076 Jy/beam
! Clean residual mean=0.000052 rms=0.012406 Jy/beam
! Combined flux in latest and established models = 1.62281 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.62281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.658391Jy  sigma=9.208589
! Fit after  self-cal, rms=0.658393Jy  sigma=9.208599
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.35454 Jy
! Total flux subtracted in 50 components = 0.35454 Jy
! Clean residual min=-0.045543 max=0.106476 Jy/beam
! Clean residual mean=0.000064 rms=0.008546 Jy/beam
! Combined flux in latest and established models = 1.97735 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 1.97735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.451608Jy  sigma=6.074672
! Fit after  self-cal, rms=0.451567Jy  sigma=6.074463
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110609 Jy
! Total flux subtracted in 50 components = 0.110609 Jy
! Clean residual min=-0.049058 max=0.048363 Jy/beam
! Clean residual mean=0.000068 rms=0.008175 Jy/beam
! Combined flux in latest and established models = 2.08795 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 3 model components to the UV plane model.
! The established model now contains 5 components and 2.08795 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.426820Jy  sigma=6.117581
! Fit after  self-cal, rms=0.426410Jy  sigma=6.115922
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0510363 Jy
! Total flux subtracted in 50 components = 0.0510363 Jy
! Clean residual min=-0.050524 max=0.038269 Jy/beam
! Clean residual mean=0.000070 rms=0.008115 Jy/beam
! Combined flux in latest and established models = 2.13899 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 8 components and 2.13899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.420441Jy  sigma=6.295117
! Fit after  self-cal, rms=0.420214Jy  sigma=6.294394
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7516 mas, bmaj=0.9298 mas, bpa=18.23 degrees
! Estimated noise=0.299586 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00939091 Jy
! Component: 100  -  total flux cleaned = 0.00784809 Jy
! Total flux subtracted in 100 components = 0.00784809 Jy
! Clean residual min=-0.044513 max=0.037492 Jy/beam
! Clean residual mean=0.000976 rms=0.007004 Jy/beam
! Combined flux in latest and established models = 2.14684 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 12 components and 2.14684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.418841Jy  sigma=6.317432
! Fit after  self-cal, rms=0.418446Jy  sigma=6.314929
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.06     GC        0.98     HH        1.00*    
!   HN        1.03     KK        0.95     KP        1.07     LA        1.07     
!   MA        1.00*    MC        1.00*    MK        1.01     NL        1.11     
!   NY        1.05     ON        1.00*    OV        1.03     PT        1.01     
!   SC        1.13     TS        1.01     WF        1.04     WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.18     FD        0.92     GC        0.99     HH        1.00*    
!   HN        1.16     KK        1.08     KP        1.03     LA        1.11     
!   MA        1.00*    MC        1.00*    MK        1.13     NL        0.90     
!   NY        0.86     ON        0.97     OV        0.96     PT        0.98     
!   SC        1.00*    TS        0.90     WF        1.06     WZ        1.23     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.05     FD        1.09     GC        1.14     HH        1.00*    
!   HN        0.86     KK        1.03     KP        1.13     LA        1.11     
!   MA        0.80     MC        0.88     MK        0.78     NL        0.93     
!   NY        1.10     ON        0.99     OV        0.97     PT        0.97     
!   SC        0.83     TS        1.00     WF        0.67     WZ        1.08     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.03     FD        1.03     GC        1.07     HH        1.00*    
!   HN        1.48     KK        1.13     KP        1.07     LA        1.03     
!   MA        1.00*    MC        1.00*    MK        1.01     NL        1.01     
!   NY        0.72     ON        1.00*    OV        0.99     PT        1.01     
!   SC        0.98     TS        1.00*    WF        1.12     WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.99     GC        1.02     HH        1.00*    
!   HN        0.93     KK        1.07     KP        1.02     LA        0.88     
!   MA        1.00*    MC        1.00*    MK        0.83     NL        1.14     
!   NY        0.99     ON        1.00*    OV        0.98     PT        1.05     
!   SC        1.09     TS        1.02     WF        0.88     WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.26     FD        1.04     GC        1.06     HH        1.00*    
!   HN        1.06     KK        1.09     KP        1.08     LA        1.11     
!   MA        1.00*    MC        1.00*    MK        1.10     NL        0.95     
!   NY        1.00     ON        0.93     OV        1.07     PT        0.99     
!   SC        1.00*    TS        0.90     WF        0.84     WZ        1.28     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.17     FD        1.11     GC        1.11     HH        1.00*    
!   HN        0.94     KK        1.04     KP        1.10     LA        1.10     
!   MA        0.80     MC        0.64     MK        0.74     NL        0.90     
!   NY        1.11     ON        1.10     OV        0.98     PT        0.88     
!   SC        0.78     TS        1.01     WF        0.76     WZ        1.10     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.82     FD        1.08     GC        1.10     HH        1.00*    
!   HN        1.32     KK        0.73     KP        1.08     LA        1.03     
!   MA        1.00*    MC        1.00*    MK        0.94     NL        0.98     
!   NY        0.90     ON        1.00*    OV        0.97     PT        0.98     
!   SC        1.10     TS        1.00*    WF        1.02     WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        1.05     GC        0.91     HH        1.00*    
!   HN        0.97     KK        1.01     KP        0.90     LA        1.04     
!   MA        1.00*    MC        1.00*    MK        0.84     NL        1.09     
!   NY        1.01     ON        1.00*    OV        0.95     PT        0.98     
!   SC        1.07     TS        0.99     WF        0.84     WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     FD        1.08     GC        0.93     HH        1.00*    
!   HN        1.12     KK        1.12     KP        1.01     LA        1.11     
!   MA        1.00*    MC        1.00*    MK        1.15     NL        0.80     
!   NY        1.03     ON        1.00*    OV        1.04     PT        0.97     
!   SC        1.00*    TS        0.86     WF        0.67     WZ        1.26     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.24     FD        1.16     GC        0.97     HH        1.00*    
!   HN        0.78     KK        0.99     KP        1.13     LA        1.10     
!   MA        0.94     MC        0.87     MK        0.91     NL        0.91     
!   NY        1.13     ON        1.10     OV        0.87     PT        1.09     
!   SC        0.89     TS        0.94     WF        0.79     WZ        0.97     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.99     FD        1.01     GC        1.09     HH        1.00*    
!   HN        1.47     KK        0.89     KP        1.08     LA        0.95     
!   MA        1.00*    MC        1.00*    MK        0.99     NL        0.99     
!   NY        0.91     ON        1.00*    OV        0.93     PT        1.02     
!   SC        0.86     TS        1.00*    WF        0.99     WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.00     GC        1.03     HH        1.00*    
!   HN        0.97     KK        1.03     KP        1.00     LA        1.02     
!   MA        1.00*    MC        1.00*    MK        0.86     NL        1.11     
!   NY        0.80     ON        1.00*    OV        0.96     PT        1.02     
!   SC        0.92     TS        0.99     WF        0.98     WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.28     FD        1.06     GC        0.95     HH        1.00*    
!   HN        1.02     KK        1.10     KP        1.01     LA        1.07     
!   MA        1.00*    MC        1.00*    MK        1.12     NL        0.91     
!   NY        1.12     ON        0.71     OV        1.04     PT        0.95     
!   SC        1.00*    TS        0.92     WF        0.74     WZ        1.23     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.09     FD        1.21     GC        1.11     HH        1.00*    
!   HN        0.71     KK        0.97     KP        1.08     LA        0.99     
!   MA        0.99     MC        0.73     MK        0.76     NL        0.89     
!   NY        1.17     ON        1.05     OV        0.87     PT        1.03     
!   SC        0.82     TS        0.95     WF        0.79     WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.96     FD        1.01     GC        1.08     HH        1.00*    
!   HN        1.37     KK        0.89     KP        1.02     LA        1.00     
!   MA        1.00*    MC        1.00*    MK        0.99     NL        1.01     
!   NY        0.72     ON        1.00*    OV        0.83     PT        0.89     
!   SC        0.99     TS        1.00*    WF        1.05     WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.418446Jy  sigma=6.314929
! Fit after  self-cal, rms=0.263459Jy  sigma=3.016834
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7448 mas, bmaj=0.9242 mas, bpa=18.67 degrees
! Estimated noise=0.298052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211772 Jy
! Component: 100  -  total flux cleaned = 0.026719 Jy
! Total flux subtracted in 100 components = 0.026719 Jy
! Clean residual min=-0.019475 max=0.021833 Jy/beam
! Clean residual mean=0.000523 rms=0.003553 Jy/beam
! Combined flux in latest and established models = 2.17356 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 2.17356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259644Jy  sigma=2.963725
! Fit after  self-cal, rms=0.258985Jy  sigma=2.952986
! Inverting map 
! Added new window around map position (-2.1, 2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173966 Jy
! Component: 100  -  total flux cleaned = 0.0213627 Jy
! Total flux subtracted in 100 components = 0.0213627 Jy
! Clean residual min=-0.019400 max=0.015688 Jy/beam
! Clean residual mean=0.000541 rms=0.003294 Jy/beam
! Combined flux in latest and established models = 2.19492 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 31 components and 2.19492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.256889Jy  sigma=2.927063
! Fit after  self-cal, rms=0.256728Jy  sigma=2.921051
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00382123 Jy
! Component: 100  -  total flux cleaned = 0.00491622 Jy
! Total flux subtracted in 100 components = 0.00491622 Jy
! Clean residual min=-0.018538 max=0.015130 Jy/beam
! Clean residual mean=0.000546 rms=0.003215 Jy/beam
! Combined flux in latest and established models = 2.19984 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 2.19984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.255588Jy  sigma=2.904145
! Fit after  self-cal, rms=0.154530Jy  sigma=1.339700
! Inverting map and beam 
! Estimated beam: bmin=0.7467 mas, bmaj=0.9188 mas, bpa=17.76 degrees
! Estimated noise=0.299313 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170618 Jy
! Component: 100  -  total flux cleaned = 0.0262105 Jy
! Total flux subtracted in 100 components = 0.0262105 Jy
! Clean residual min=-0.004701 max=0.007020 Jy/beam
! Clean residual mean=0.000305 rms=0.001134 Jy/beam
! Combined flux in latest and established models = 2.22605 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 46 components and 2.22605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152377Jy  sigma=1.321184
! Fit after  self-cal, rms=0.150610Jy  sigma=1.280582
! Inverting map and beam 
! Estimated beam: bmin=0.7457 mas, bmaj=0.9173 mas, bpa=17.79 degrees
! Estimated noise=0.29989 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128285 Jy
! Component: 100  -  total flux cleaned = 0.0183767 Jy
! Total flux subtracted in 100 components = 0.0183767 Jy
! Clean residual min=-0.004135 max=0.005774 Jy/beam
! Clean residual mean=0.000262 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 2.24442 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 51 components and 2.24442 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149268Jy  sigma=1.269456
! Fit after  self-cal, rms=0.148293Jy  sigma=1.249898
! Inverting map and beam 
! Estimated beam: bmin=0.7447 mas, bmaj=0.916 mas, bpa=17.79 degrees
! Estimated noise=0.300367 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106448 Jy
! Component: 100  -  total flux cleaned = 0.0146845 Jy
! Total flux subtracted in 100 components = 0.0146845 Jy
! Clean residual min=-0.003820 max=0.005352 Jy/beam
! Clean residual mean=0.000235 rms=0.000876 Jy/beam
! Combined flux in latest and established models = 2.25911 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 2.25911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.147317Jy  sigma=1.241678
! Fit after  self-cal, rms=0.146662Jy  sigma=1.229617
! Inverting map and beam 
! Estimated beam: bmin=0.7438 mas, bmaj=0.9148 mas, bpa=17.77 degrees
! Estimated noise=0.300791 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00916999 Jy
! Component: 100  -  total flux cleaned = 0.0124929 Jy
! Total flux subtracted in 100 components = 0.0124929 Jy
! Clean residual min=-0.003517 max=0.004990 Jy/beam
! Clean residual mean=0.000214 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 2.2716 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 2.2716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145912Jy  sigma=1.223257
! Fit after  self-cal, rms=0.145434Jy  sigma=1.214976
! Inverting map and beam 
! Estimated beam: bmin=0.743 mas, bmaj=0.9137 mas, bpa=17.75 degrees
! Estimated noise=0.301166 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0080339 Jy
! Component: 100  -  total flux cleaned = 0.00998948 Jy
! Total flux subtracted in 100 components = 0.00998948 Jy
! Clean residual min=-0.003166 max=0.004726 Jy/beam
! Clean residual mean=0.000196 rms=0.000754 Jy/beam
! Combined flux in latest and established models = 2.28159 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 60 components and 2.28159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144851Jy  sigma=1.209482
! Fit after  self-cal, rms=0.144496Jy  sigma=1.203901
! Inverting map and beam 
! Estimated beam: bmin=0.7424 mas, bmaj=0.9128 mas, bpa=17.73 degrees
! Estimated noise=0.301485 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00714753 Jy
! Component: 100  -  total flux cleaned = 0.0085019 Jy
! Total flux subtracted in 100 components = 0.0085019 Jy
! Clean residual min=-0.002971 max=0.004443 Jy/beam
! Clean residual mean=0.000180 rms=0.000714 Jy/beam
! Combined flux in latest and established models = 2.29009 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 2.29009 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144028Jy  sigma=1.199307
! Fit after  self-cal, rms=0.143746Jy  sigma=1.195088
! Inverting map and beam 
! Estimated beam: bmin=0.7417 mas, bmaj=0.912 mas, bpa=17.71 degrees
! Estimated noise=0.301776 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620295 Jy
! Component: 100  -  total flux cleaned = 0.00727082 Jy
! Total flux subtracted in 100 components = 0.00727082 Jy
! Clean residual min=-0.002713 max=0.004258 Jy/beam
! Clean residual mean=0.000167 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 2.29736 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 64 components and 2.29736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143366Jy  sigma=1.191157
! Fit after  self-cal, rms=0.143141Jy  sigma=1.188010
! Inverting map and beam 
! Estimated beam: bmin=0.7412 mas, bmaj=0.9112 mas, bpa=17.68 degrees
! Estimated noise=0.30203 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00541745 Jy
! Component: 100  -  total flux cleaned = 0.00639923 Jy
! Total flux subtracted in 100 components = 0.00639923 Jy
! Clean residual min=-0.002529 max=0.004084 Jy/beam
! Clean residual mean=0.000155 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 2.30376 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 66 components and 2.30376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142828Jy  sigma=1.184644
! Fit after  self-cal, rms=0.142644Jy  sigma=1.182228
! Inverting map and beam 
! Estimated beam: bmin=0.7408 mas, bmaj=0.9105 mas, bpa=17.65 degrees
! Estimated noise=0.302257 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00490844 Jy
! Component: 100  -  total flux cleaned = 0.00551377 Jy
! Total flux subtracted in 100 components = 0.00551377 Jy
! Clean residual min=-0.002345 max=0.003940 Jy/beam
! Clean residual mean=0.000144 rms=0.000634 Jy/beam
! Combined flux in latest and established models = 2.30928 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 2.30928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142385Jy  sigma=1.179303
! Fit after  self-cal, rms=0.142235Jy  sigma=1.177494
! Inverting map and beam 
! Estimated beam: bmin=0.7403 mas, bmaj=0.91 mas, bpa=17.62 degrees
! Estimated noise=0.302451 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00432178 Jy
! Component: 100  -  total flux cleaned = 0.00488355 Jy
! Total flux subtracted in 100 components = 0.00488355 Jy
! Clean residual min=-0.002229 max=0.003824 Jy/beam
! Clean residual mean=0.000135 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 2.31416 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 2.31416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142021Jy  sigma=1.174919
! Fit after  self-cal, rms=0.141901Jy  sigma=1.173569
! Inverting map and beam 
! Estimated beam: bmin=0.74 mas, bmaj=0.9094 mas, bpa=17.59 degrees
! Estimated noise=0.302632 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381511 Jy
! Component: 100  -  total flux cleaned = 0.00421494 Jy
! Total flux subtracted in 100 components = 0.00421494 Jy
! Clean residual min=-0.002098 max=0.003735 Jy/beam
! Clean residual mean=0.000128 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 2.31837 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 77 components and 2.31838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141717Jy  sigma=1.171324
! Fit after  self-cal, rms=0.141616Jy  sigma=1.170328
! Inverting map and beam 
! Estimated beam: bmin=0.7397 mas, bmaj=0.909 mas, bpa=17.56 degrees
! Estimated noise=0.302789 mJy/beam.
! Added new window around map position (-0.4, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00449997 Jy
! Component: 100  -  total flux cleaned = 0.00569378 Jy
! Total flux subtracted in 100 components = 0.00569378 Jy
! Clean residual min=-0.002063 max=0.003543 Jy/beam
! Clean residual mean=0.000122 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 2.32407 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 87 components and 2.32407 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141442Jy  sigma=1.167826
! Fit after  self-cal, rms=0.141362Jy  sigma=1.166719
! Inverting map and beam 
! Estimated beam: bmin=0.7394 mas, bmaj=0.9086 mas, bpa=17.54 degrees
! Estimated noise=0.30294 mJy/beam.
! Added new window around map position (-4.5, 2.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00422828 Jy
! Component: 100  -  total flux cleaned = 0.00552679 Jy
! Total flux subtracted in 100 components = 0.00552679 Jy
! Clean residual min=-0.002055 max=0.002668 Jy/beam
! Clean residual mean=0.000112 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 2.3296 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 2.3296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141207Jy  sigma=1.164272
! Fit after  self-cal, rms=0.141146Jy  sigma=1.163622
! Inverting map and beam 
! Estimated beam: bmin=0.7392 mas, bmaj=0.9083 mas, bpa=17.52 degrees
! Estimated noise=0.303095 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00324441 Jy
! Component: 100  -  total flux cleaned = 0.00371976 Jy
! Total flux subtracted in 100 components = 0.00371976 Jy
! Clean residual min=-0.001973 max=0.002643 Jy/beam
! Clean residual mean=0.000106 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 2.33332 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 99 components and 2.33332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141022Jy  sigma=1.161753
! Fit after  self-cal, rms=0.140967Jy  sigma=1.161363
! Inverting map and beam 
! Estimated beam: bmin=0.7391 mas, bmaj=0.908 mas, bpa=17.5 degrees
! Estimated noise=0.303223 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00267622 Jy
! Component: 100  -  total flux cleaned = 0.00312906 Jy
! Total flux subtracted in 100 components = 0.00312906 Jy
! Clean residual min=-0.001969 max=0.002604 Jy/beam
! Clean residual mean=0.000100 rms=0.000525 Jy/beam
! Combined flux in latest and established models = 2.33644 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 30 model components to the UV plane model.
! The established model now contains 104 components and 2.33644 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140854Jy  sigma=1.159729
! Fit after  self-cal, rms=0.140807Jy  sigma=1.159466
! Inverting map and beam 
! Estimated beam: bmin=0.7389 mas, bmaj=0.9077 mas, bpa=17.47 degrees
! Estimated noise=0.303338 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230086 Jy
! Component: 100  -  total flux cleaned = 0.00273079 Jy
! Total flux subtracted in 100 components = 0.00273079 Jy
! Clean residual min=-0.001965 max=0.002580 Jy/beam
! Clean residual mean=0.000096 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 2.33918 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 105 components and 2.33918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140705Jy  sigma=1.157972
! Fit after  self-cal, rms=0.140665Jy  sigma=1.157789
! Inverting map and beam 
! Estimated beam: bmin=0.7387 mas, bmaj=0.9074 mas, bpa=17.44 degrees
! Estimated noise=0.303445 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206792 Jy
! Component: 100  -  total flux cleaned = 0.00248186 Jy
! Total flux subtracted in 100 components = 0.00248186 Jy
! Clean residual min=-0.001962 max=0.002537 Jy/beam
! Clean residual mean=0.000093 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 2.34166 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 108 components and 2.34166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140570Jy  sigma=1.156437
! Fit after  self-cal, rms=0.140536Jy  sigma=1.156337
! Inverting map and beam 
! Estimated beam: bmin=0.7386 mas, bmaj=0.9072 mas, bpa=17.42 degrees
! Estimated noise=0.303544 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196369 Jy
! Component: 100  -  total flux cleaned = 0.00226322 Jy
! Total flux subtracted in 100 components = 0.00226322 Jy
! Clean residual min=-0.001959 max=0.002500 Jy/beam
! Clean residual mean=0.000089 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 2.34392 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 112 components and 2.34392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140449Jy  sigma=1.155092
! Fit after  self-cal, rms=0.140416Jy  sigma=1.155042
! Inverting map and beam 
! Estimated beam: bmin=0.7384 mas, bmaj=0.9069 mas, bpa=17.39 degrees
! Estimated noise=0.303627 mJy/beam.
! Added new window around map position (2.2, 0.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230174 Jy
! Component: 100  -  total flux cleaned = 0.00268534 Jy
! Total flux subtracted in 100 components = 0.00268534 Jy
! Clean residual min=-0.001976 max=0.002434 Jy/beam
! Clean residual mean=0.000086 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 2.34661 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 115 components and 2.3466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140333Jy  sigma=1.153854
! Fit after  self-cal, rms=0.140303Jy  sigma=1.153780
! Inverting map and beam 
! Estimated beam: bmin=0.7383 mas, bmaj=0.9067 mas, bpa=17.36 degrees
! Estimated noise=0.303703 mJy/beam.
! Added new window around map position (-3.5, 4.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273328 Jy
! Component: 100  -  total flux cleaned = 0.00331484 Jy
! Total flux subtracted in 100 components = 0.00331484 Jy
! Clean residual min=-0.001993 max=0.002247 Jy/beam
! Clean residual mean=0.000084 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 2.34992 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 2.34992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140226Jy  sigma=1.152343
! Fit after  self-cal, rms=0.140193Jy  sigma=1.152348
! Inverting map and beam 
! Estimated beam: bmin=0.7382 mas, bmaj=0.9065 mas, bpa=17.34 degrees
! Estimated noise=0.30377 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00181093 Jy
! Component: 100  -  total flux cleaned = 0.00226127 Jy
! Total flux subtracted in 100 components = 0.00226127 Jy
! Clean residual min=-0.001974 max=0.002226 Jy/beam
! Clean residual mean=0.000081 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 2.35218 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 123 components and 2.35218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140125Jy  sigma=1.151277
! Fit after  self-cal, rms=0.140100Jy  sigma=1.151328
! Inverting map and beam 
! Estimated beam: bmin=0.7381 mas, bmaj=0.9063 mas, bpa=17.31 degrees
! Estimated noise=0.303833 mJy/beam.
! Added new window around map position (-0.5, 6.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245323 Jy
! Component: 100  -  total flux cleaned = 0.00280466 Jy
! Total flux subtracted in 100 components = 0.00280466 Jy
! Clean residual min=-0.002000 max=0.001946 Jy/beam
! Clean residual mean=0.000078 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 2.35498 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 129 components and 2.35498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140028Jy  sigma=1.150281
! Fit after  self-cal, rms=0.140008Jy  sigma=1.150352
! Inverting map and beam 
! Estimated beam: bmin=0.738 mas, bmaj=0.9061 mas, bpa=17.29 degrees
! Estimated noise=0.30389 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147912 Jy
! Component: 100  -  total flux cleaned = 0.00190121 Jy
! Total flux subtracted in 100 components = 0.00190121 Jy
! Clean residual min=-0.002007 max=0.001940 Jy/beam
! Clean residual mean=0.000075 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 2.35689 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 131 components and 2.35689 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139945Jy  sigma=1.149478
! Fit after  self-cal, rms=0.139924Jy  sigma=1.149599
! Inverting map and beam 
! Estimated beam: bmin=0.7379 mas, bmaj=0.906 mas, bpa=17.26 degrees
! Estimated noise=0.303938 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123554 Jy
! Component: 100  -  total flux cleaned = 0.00164148 Jy
! Total flux subtracted in 100 components = 0.00164148 Jy
! Clean residual min=-0.002007 max=0.001932 Jy/beam
! Clean residual mean=0.000073 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 2.35853 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 133 components and 2.35853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139866Jy  sigma=1.148795
! Fit after  self-cal, rms=0.139710Jy  sigma=1.145482
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0133+476_X
! Writing UV FITS file: 0133+476_X.uvf
! Writing 133 model components to file: 0133+476_X.mod
! wwins: Wrote 8 windows to 0133+476_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7379 x 0.906 at 17.26 degrees (North through East)
! Clean map  min=-0.0024072  max=2.0958 Jy/beam
! Writing clean map to FITS file: 0133+476_X.fits
! Writing difmap environment to: 0133+476_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0133+476_X]
device 0133+476_Xuv.ps/vps,1,2
! Attempting to open device: '0133+476_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0133+476_Xim.ps/vps
! Attempting to open device: '0133+476_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.7379 mas, bmaj=0.906 mas, bpa=17.26 degrees
! Estimated noise=0.303938 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7379 x 0.906 at 17.26 degrees (North through East)
! Clean map  min=-0.0024072  max=2.0958 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.1]
quit
! Quitting program
! Log file 0133+476_X.log closed on Thu Jun 26 14:42:00 2008