! Started logfile: 0528+134_S.log on Tue Jun 17 11:47:57 2008
observe 0528+134_S.edt
! Reading UV FITS file: 0528+134_S.edt
! AN table 1: 146 integrations on 190 of 190 possible baselines.
! Apparent sampling: 0.181327 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0528+134
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1904 lines of history.
! 
! Reading 20120 visibilities.
![@gonzo6-0.4 0528+134_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2179 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2179 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.578644Jy  sigma=19.338805
! Fit after  self-cal, rms=1.571663Jy  sigma=19.348476
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.254 mas, bmaj=4.625 mas, bpa=-5.44 degrees
! Estimated noise=1.12768 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.73702 Jy
! Total flux subtracted in 50 components = 1.73702 Jy
! Clean residual min=-0.086186 max=0.528086 Jy/beam
! Clean residual mean=0.000424 rms=0.030328 Jy/beam
! Combined flux in latest and established models = 1.73702 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 1.73702 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.989765Jy  sigma=11.665358
! Fit after  self-cal, rms=0.989705Jy  sigma=11.665320
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.546355 Jy
! Total flux subtracted in 50 components = 0.546355 Jy
! Clean residual min=-0.067775 max=0.242252 Jy/beam
! Clean residual mean=0.000343 rms=0.018254 Jy/beam
! Combined flux in latest and established models = 2.28338 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 2.28338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.686242Jy  sigma=7.144392
! Fit after  self-cal, rms=0.685173Jy  sigma=7.140765
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.275523 Jy
! Total flux subtracted in 50 components = 0.275523 Jy
! Clean residual min=-0.059086 max=0.139050 Jy/beam
! Clean residual mean=0.000303 rms=0.013640 Jy/beam
! Combined flux in latest and established models = 2.5589 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 2.5589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.578593Jy  sigma=5.383453
! Fit after  self-cal, rms=0.577688Jy  sigma=5.380228
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.16794 Jy
! Total flux subtracted in 50 components = 0.16794 Jy
! Clean residual min=-0.051749 max=0.087452 Jy/beam
! Clean residual mean=0.000278 rms=0.011499 Jy/beam
! Combined flux in latest and established models = 2.72684 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 32 components and 2.72684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.531217Jy  sigma=4.624418
! Fit after  self-cal, rms=0.530836Jy  sigma=4.623027
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.106141 Jy
! Total flux subtracted in 50 components = 0.106141 Jy
! Clean residual min=-0.047744 max=0.055597 Jy/beam
! Clean residual mean=0.000263 rms=0.010541 Jy/beam
! Combined flux in latest and established models = 2.83298 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 2.83298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.510669Jy  sigma=4.329954
! Fit after  self-cal, rms=0.510465Jy  sigma=4.329116
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.62 mas, bmaj=5.555 mas, bpa=-9.423 degrees
! Estimated noise=0.673069 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0814806 Jy
! Component: 100  -  total flux cleaned = 0.122412 Jy
! Total flux subtracted in 100 components = 0.122412 Jy
! Clean residual min=-0.056551 max=0.049432 Jy/beam
! Clean residual mean=0.001807 rms=0.013784 Jy/beam
! Combined flux in latest and established models = 2.9554 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 44 components and 2.9554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.494522Jy  sigma=4.218016
! Fit after  self-cal, rms=0.494358Jy  sigma=4.216645
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.04     GC        1.05     HH        1.00*    
!   HN        0.88     KK        0.91     KP        1.05     LA        0.83     
!   MA        1.00*    MC        1.00*    MK        0.83     NL        1.08     
!   NY        0.66     ON        1.00*    OV        1.07     PT        0.99     
!   SC        1.02     TS        1.12     WF        1.00     WZ        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     GC        1.00     HH        1.00*    
!   HN        0.99     KK        0.84     KP        1.05     LA        1.00     
!   MA        1.00*    MC        1.00*    MK        1.03     NL        1.03     
!   NY        1.24     ON        1.00*    OV        1.08     PT        0.90     
!   SC        0.99     TS        1.07     WF        1.01     WZ        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.07     GC        1.08     HH        1.00*    
!   HN        1.02     KK        0.69     KP        1.08     LA        1.00     
!   MA        1.00*    MC        1.00*    MK        1.09     NL        0.91     
!   NY        1.28     ON        1.00*    OV        0.97     PT        1.05     
!   SC        1.02     TS        1.05     WF        1.06     WZ        1.00*    
! 
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.91     GC        1.03     HH        1.00*    
!   HN        1.04     KK        0.62     KP        1.02     LA        1.13     
!   MA        1.00*    MC        1.00*    MK        1.10     NL        0.99     
!   NY        1.27     ON        1.00*    OV        0.91     PT        1.03     
!   SC        1.05     TS        1.07     WF        1.05     WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.494358Jy  sigma=4.216645
! Fit after  self-cal, rms=0.246394Jy  sigma=1.964195
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.628 mas, bmaj=5.629 mas, bpa=-9.718 degrees
! Estimated noise=0.668463 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, 4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0349873 Jy
! Component: 100  -  total flux cleaned = 0.0358175 Jy
! Total flux subtracted in 100 components = 0.0358175 Jy
! Clean residual min=-0.016412 max=0.021389 Jy/beam
! Clean residual mean=0.001278 rms=0.005318 Jy/beam
! Combined flux in latest and established models = 2.99121 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 52 components and 2.99121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.238849Jy  sigma=1.837490
! Fit after  self-cal, rms=0.238316Jy  sigma=1.826735
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00703029 Jy
! Component: 100  -  total flux cleaned = 0.00971742 Jy
! Total flux subtracted in 100 components = 0.00971742 Jy
! Clean residual min=-0.015601 max=0.019525 Jy/beam
! Clean residual mean=0.001196 rms=0.005039 Jy/beam
! Combined flux in latest and established models = 3.00093 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 59 components and 3.00093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235187Jy  sigma=1.792871
! Fit after  self-cal, rms=0.209847Jy  sigma=1.363151
! Inverting map and beam 
! Estimated beam: bmin=2.631 mas, bmaj=5.631 mas, bpa=-9.878 degrees
! Estimated noise=0.668567 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165046 Jy
! Component: 100  -  total flux cleaned = 0.0181775 Jy
! Total flux subtracted in 100 components = 0.0181775 Jy
! Clean residual min=-0.008560 max=0.012596 Jy/beam
! Clean residual mean=0.000557 rms=0.002803 Jy/beam
! Combined flux in latest and established models = 3.01911 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 72 components and 3.01911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.207682Jy  sigma=1.323907
! Fit after  self-cal, rms=0.206303Jy  sigma=1.298839
! Inverting map and beam 
! Estimated beam: bmin=2.627 mas, bmaj=5.627 mas, bpa=-9.954 degrees
! Estimated noise=0.667911 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103811 Jy
! Component: 100  -  total flux cleaned = 0.0122503 Jy
! Total flux subtracted in 100 components = 0.0122503 Jy
! Clean residual min=-0.007569 max=0.010673 Jy/beam
! Clean residual mean=0.000438 rms=0.002390 Jy/beam
! Combined flux in latest and established models = 3.03136 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 3.03136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.204814Jy  sigma=1.274413
! Fit after  self-cal, rms=0.204082Jy  sigma=1.263946
! Inverting map and beam 
! Estimated beam: bmin=2.624 mas, bmaj=5.625 mas, bpa=-10.02 degrees
! Estimated noise=0.667271 mJy/beam.
! Added new window around map position (-4, -15.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00860733 Jy
! Component: 100  -  total flux cleaned = 0.0106412 Jy
! Total flux subtracted in 100 components = 0.0106412 Jy
! Clean residual min=-0.006927 max=0.009737 Jy/beam
! Clean residual mean=0.000347 rms=0.002093 Jy/beam
! Combined flux in latest and established models = 3.042 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 80 components and 3.042 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202803Jy  sigma=1.247232
! Fit after  self-cal, rms=0.202403Jy  sigma=1.241803
! Inverting map and beam 
! Estimated beam: bmin=2.622 mas, bmaj=5.623 mas, bpa=-10.07 degrees
! Estimated noise=0.666659 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00511419 Jy
! Component: 100  -  total flux cleaned = 0.00682505 Jy
! Total flux subtracted in 100 components = 0.00682505 Jy
! Clean residual min=-0.006416 max=0.008866 Jy/beam
! Clean residual mean=0.000294 rms=0.001887 Jy/beam
! Combined flux in latest and established models = 3.04882 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 84 components and 3.04882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201466Jy  sigma=1.230349
! Fit after  self-cal, rms=0.201073Jy  sigma=1.227352
! Inverting map and beam 
! Estimated beam: bmin=2.621 mas, bmaj=5.621 mas, bpa=-10.11 degrees
! Estimated noise=0.666052 mJy/beam.
! Added new window around map position (16.4, 20.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00549826 Jy
! Component: 100  -  total flux cleaned = 0.00846235 Jy
! Total flux subtracted in 100 components = 0.00846235 Jy
! Clean residual min=-0.005912 max=0.007330 Jy/beam
! Clean residual mean=0.000235 rms=0.001664 Jy/beam
! Combined flux in latest and established models = 3.05729 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 90 components and 3.05729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.200256Jy  sigma=1.217222
! Fit after  self-cal, rms=0.199963Jy  sigma=1.215735
! Inverting map and beam 
! Estimated beam: bmin=2.62 mas, bmaj=5.619 mas, bpa=-10.14 degrees
! Estimated noise=0.665553 mJy/beam.
! Added new window around map position (13.6, -77.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00405837 Jy
! Component: 100  -  total flux cleaned = 0.00635149 Jy
! Total flux subtracted in 100 components = 0.00635149 Jy
! Clean residual min=-0.005612 max=0.006678 Jy/beam
! Clean residual mean=0.000187 rms=0.001529 Jy/beam
! Combined flux in latest and established models = 3.06364 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 95 components and 3.06364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199241Jy  sigma=1.208459
! Fit after  self-cal, rms=0.198977Jy  sigma=1.207346
! Inverting map and beam 
! Estimated beam: bmin=2.619 mas, bmaj=5.617 mas, bpa=-10.17 degrees
! Estimated noise=0.664978 mJy/beam.
! Added new window around map position (71.2, -79.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00284861 Jy
! Component: 100  -  total flux cleaned = 0.00443654 Jy
! Total flux subtracted in 100 components = 0.00443654 Jy
! Clean residual min=-0.005325 max=0.005810 Jy/beam
! Clean residual mean=0.000159 rms=0.001412 Jy/beam
! Combined flux in latest and established models = 3.06807 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 102 components and 3.06807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.198353Jy  sigma=1.201528
! Fit after  self-cal, rms=0.198130Jy  sigma=1.200897
! Inverting map and beam 
! Estimated beam: bmin=2.619 mas, bmaj=5.616 mas, bpa=-10.19 degrees
! Estimated noise=0.664428 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000684619 Jy
! Component: 100  -  total flux cleaned = 0.0018469 Jy
! Total flux subtracted in 100 components = 0.0018469 Jy
! Clean residual min=-0.005100 max=0.005524 Jy/beam
! Clean residual mean=0.000141 rms=0.001338 Jy/beam
! Combined flux in latest and established models = 3.06992 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 103 components and 3.06992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.197576Jy  sigma=1.196738
! Fit after  self-cal, rms=0.197262Jy  sigma=1.193280
! Inverting map 
! Added new window around map position (-74.4, 98.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0035291 Jy
! Component: 100  -  total flux cleaned = 0.00517191 Jy
! Total flux subtracted in 100 components = 0.00517191 Jy
! Clean residual min=-0.005027 max=0.005135 Jy/beam
! Clean residual mean=0.000117 rms=0.001274 Jy/beam
! Combined flux in latest and established models = 3.07509 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 114 components and 3.07509 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.196941Jy  sigma=1.189985
! Fit after  self-cal, rms=0.196900Jy  sigma=1.189332
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0528+134_S
! Writing UV FITS file: 0528+134_S.uvf
! Writing 114 model components to file: 0528+134_S.mod
! wwins: Wrote 7 windows to 0528+134_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.619 x 5.616 at -10.19 degrees (North through East)
! Clean map  min=-0.0052451  max=2.291 Jy/beam
! Writing clean map to FITS file: 0528+134_S.fits
! Writing difmap environment to: 0528+134_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0528+134_S]
device 0528+134_Suv.ps/vps,1,2
! Attempting to open device: '0528+134_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0528+134_Sim.ps/vps
! Attempting to open device: '0528+134_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.619 mas, bmaj=5.616 mas, bpa=-10.19 degrees
! Estimated noise=0.664428 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.619 x 5.616 at -10.19 degrees (North through East)
! Clean map  min=-0.0052451  max=2.291 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.4]
quit
! Quitting program
! Log file 0528+134_S.log closed on Tue Jun 17 11:48:15 2008