! Started logfile: J2225-0457_S_1999_12_20_pus_uvs.log on Thu Dec 20 16:46:31 2007 obs J2225-0457_S_1999_12_20_pus_uva.fits ! Reading UV FITS file: J2225-0457_S_1999_12_20_pus_uva.fits ! AN table 1: 82 integrations on 190 of 190 possible baselines. ! AN table 2: 202 integrations on 190 of 190 possible baselines. ! AN table 3: 55 integrations on 190 of 190 possible baselines. ! AN table 4: 52 integrations on 190 of 190 possible baselines. ! AN table 5: 23 integrations on 190 of 190 possible baselines. ! Apparent sampling: 0.111874 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2225-0457 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2298 lines of history. ! ! Reading 35200 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J2225-0457_S_1999_12_20_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1567 telescope corrections were flagged in sub-array 1. ! A total of 3030 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! A total of 516 telescope corrections were flagged in sub-array 4. ! A total of 291 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 1567 telescope corrections were flagged in sub-array 1. ! A total of 3030 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! A total of 516 telescope corrections were flagged in sub-array 4. ! A total of 291 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 1610 telescope corrections were flagged in sub-array 1. ! A total of 3272 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! A total of 516 telescope corrections were flagged in sub-array 4. ! A total of 291 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 1567 telescope corrections were flagged in sub-array 1. ! A total of 3030 telescope corrections were flagged in sub-array 2. ! A total of 706 telescope corrections were flagged in sub-array 3. ! A total of 516 telescope corrections were flagged in sub-array 4. ! A total of 291 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.346528Jy sigma=0.009471 ! Fit after self-cal, rms=0.599273Jy sigma=0.004219 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.85 mas, bmaj=4.389 mas, bpa=3.188 degrees ! Estimated noise=903.865 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.835957 Jy ! Component: 100 - total flux cleaned = 1.0787 Jy ! Total flux subtracted in 100 components = 1.0787 Jy ! Clean residual min=-0.042911 max=0.173542 Jy/beam ! Clean residual mean=0.000563 rms=0.011756 Jy/beam ! Combined flux in latest and established models = 1.0787 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.0787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.560190Jy sigma=0.003882 ! Fit after self-cal, rms=0.557902Jy sigma=0.003875 ! Inverting map ! Added new window around map position (3, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169085 Jy ! Component: 100 - total flux cleaned = 0.274498 Jy ! Total flux subtracted in 100 components = 0.274498 Jy ! Clean residual min=-0.033323 max=0.075715 Jy/beam ! Clean residual mean=0.000612 rms=0.008456 Jy/beam ! Combined flux in latest and established models = 1.3532 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 1.3532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465963Jy sigma=0.003013 ! Fit after self-cal, rms=0.457958Jy sigma=0.002978 ! Inverting map ! Added new window around map position (5.5, -0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0942543 Jy ! Component: 100 - total flux cleaned = 0.1562 Jy ! Total flux subtracted in 100 components = 0.1562 Jy ! Clean residual min=-0.025930 max=0.046420 Jy/beam ! Clean residual mean=0.000643 rms=0.006664 Jy/beam ! Combined flux in latest and established models = 1.5094 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 1.5094 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.420346Jy sigma=0.002605 ! Fit after self-cal, rms=0.416956Jy sigma=0.002589 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535708 Jy ! Component: 100 - total flux cleaned = 0.0910864 Jy ! Total flux subtracted in 100 components = 0.0910864 Jy ! Clean residual min=-0.022943 max=0.043539 Jy/beam ! Clean residual mean=0.000660 rms=0.005895 Jy/beam ! Combined flux in latest and established models = 1.60049 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 1.60049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.401737Jy sigma=0.002429 ! Fit after self-cal, rms=0.400531Jy sigma=0.002424 ! Inverting map ! Added new window around map position (52, -15). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425908 Jy ! Component: 100 - total flux cleaned = 0.0734269 Jy ! Total flux subtracted in 100 components = 0.0734269 Jy ! Clean residual min=-0.021624 max=0.028369 Jy/beam ! Clean residual mean=0.000650 rms=0.005414 Jy/beam ! Combined flux in latest and established models = 1.67392 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 1.67392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.388274Jy sigma=0.002299 ! Fit after self-cal, rms=0.387589Jy sigma=0.002296 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.18 mas, bmaj=5.214 mas, bpa=0.3188 degrees ! Estimated noise=558.269 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (49.5, -18). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0861694 Jy ! Component: 100 - total flux cleaned = 0.147739 Jy ! Component: 150 - total flux cleaned = 0.196597 Jy ! Component: 200 - total flux cleaned = 0.236243 Jy ! Total flux subtracted in 200 components = 0.236243 Jy ! Clean residual min=-0.017237 max=0.053574 Jy/beam ! Clean residual mean=0.008527 rms=0.009077 Jy/beam ! Combined flux in latest and established models = 1.91016 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 126 components and 1.91016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361455Jy sigma=0.002023 ! Fit after self-cal, rms=0.359295Jy sigma=0.002006 ! Inverting map ! Added new window around map position (58.5, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0599321 Jy ! Component: 100 - total flux cleaned = 0.0995006 Jy ! Component: 150 - total flux cleaned = 0.131744 Jy ! Component: 200 - total flux cleaned = 0.158994 Jy ! Total flux subtracted in 200 components = 0.158994 Jy ! Clean residual min=-0.014400 max=0.044487 Jy/beam ! Clean residual mean=0.007560 rms=0.007492 Jy/beam ! Combined flux in latest and established models = 2.06915 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 188 components and 2.06915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.345562Jy sigma=0.001876 ! Fit after self-cal, rms=0.344023Jy sigma=0.001864 ! Inverting map ! Added new window around map position (127.5, -36.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471992 Jy ! Component: 100 - total flux cleaned = 0.0795879 Jy ! Component: 150 - total flux cleaned = 0.106426 Jy ! Component: 200 - total flux cleaned = 0.12997 Jy ! Total flux subtracted in 200 components = 0.12997 Jy ! Clean residual min=-0.012667 max=0.031673 Jy/beam ! Clean residual mean=0.007091 rms=0.006432 Jy/beam ! Combined flux in latest and established models = 2.19912 Jy ! Performing phase self-cal ! Adding 78 model components to the UV plane model. ! The established model now contains 244 components and 2.19912 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.334015Jy sigma=0.001779 ! Fit after self-cal, rms=0.332939Jy sigma=0.001772 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* HH 0.84 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MC 1.51 MK 1.00* NY 1.00* ON 0.87 ! OV 1.00* PT 1.00* SC 1.19 TS 1.00* ! WF 1.00* WZ 1.00* GN 1.00* NL 1.00* ! ! A total of 129 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.97 GC 1.00* HH 1.00 ! HN 0.90 KK 1.00* KP 1.07 LA 1.04 ! MC 0.99 MK 1.00* NY 1.00* ON 1.04 ! OV 1.00* PT 1.00 SC 1.05 TS 1.05 ! WF 0.78 WZ 0.98 GN 1.00* NL 1.10 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.94 GC 1.11 HH 1.00* ! HN 1.00 KK 1.08 KP 0.92 LA 1.01 ! MC 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 1.01 PT 0.99 SC 0.98 TS 1.00* ! WF 1.01 WZ 1.00* GN 1.00* NL 0.97 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.00 GC 1.02 HH 1.00* ! HN 1.08 KK 1.01 KP 0.98 LA 0.96 ! MC 1.00* MK 1.02 NY 1.00* ON 1.00* ! OV 1.04 PT 0.99 SC 1.12 TS 1.09 ! WF 1.08 WZ 1.00* GN 1.00* NL 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.02 FD 1.07 GC 0.98 HH 1.00* ! HN 1.00* KK 1.00 KP 1.04 LA 1.09 ! MC 1.00* MK 0.97 NY 1.00* ON 1.00* ! OV 1.03 PT 1.15 SC 1.00* TS 1.00 ! WF 1.00* WZ 1.00* GN 1.00* NL 1.00* ! ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* HH 0.90 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MC 0.85 MK 1.00* NY 1.00* ON 1.09 ! OV 1.00* PT 1.00* SC 1.06 TS 1.00* ! WF 1.00* WZ 1.00* GN 1.00* NL 1.00* ! ! A total of 129 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.01 GC 1.00* HH 0.99 ! HN 0.95 KK 1.00* KP 1.09 LA 1.00 ! MC 1.01 MK 1.00* NY 1.00* ON 1.01 ! OV 1.00* PT 0.98 SC 1.04 TS 1.01 ! WF 0.80 WZ 1.00 GN 1.00* NL 1.09 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.98 GC 1.11 HH 1.00* ! HN 1.09 KK 1.05 KP 0.96 LA 0.99 ! MC 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 0.98 PT 0.97 SC 0.96 TS 1.00* ! WF 1.01 WZ 1.00* GN 1.00* NL 0.96 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.04 GC 0.99 HH 1.00* ! HN 1.16 KK 0.92 KP 1.00 LA 0.92 ! MC 1.00* MK 0.99 NY 1.00* ON 1.00* ! OV 1.02 PT 0.97 SC 1.12 TS 1.10 ! WF 1.08 WZ 1.00* GN 1.00* NL 1.03 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.12 GC 0.95 HH 1.00* ! HN 1.00* KK 0.93 KP 1.06 LA 1.06 ! MC 1.00* MK 0.94 NY 1.00* ON 1.00* ! OV 0.99 PT 1.13 SC 1.00* TS 0.98 ! WF 1.00* WZ 1.00* GN 1.00* NL 1.00* ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* GC 0.00* HH 0.00* ! HN 0.00* KK 0.00* KP 0.00* LA 0.00* ! MC 0.00* MK 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* TS 0.00* ! WF 0.00* WZ 0.00* GN 0.00* NL 0.00* ! ! A total of 165 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.97 GC 1.00* HH 0.97 ! HN 0.91 KK 1.00* KP 1.09 LA 1.02 ! MC 1.00* MK 1.00* NY 1.00* ON 0.97 ! OV 1.00* PT 0.95 SC 1.06 TS 1.01 ! WF 0.79 WZ 0.96 GN 1.00* NL 1.05 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.94 GC 1.07 HH 1.00* ! HN 0.97 KK 1.03 KP 0.95 LA 1.00 ! MC 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 0.99 PT 0.96 SC 0.95 TS 1.00* ! WF 0.97 WZ 1.00* GN 1.00* NL 0.94 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 0.97 HH 1.00* ! HN 1.05 KK 0.96 KP 1.01 LA 0.95 ! MC 1.00* MK 0.98 NY 1.00* ON 1.00* ! OV 1.04 PT 0.94 SC 1.13 TS 1.03 ! WF 1.06 WZ 1.00* GN 1.00* NL 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.99 FD 1.05 GC 0.96 HH 1.00* ! HN 1.00* KK 1.00 KP 0.98 LA 1.10 ! MC 1.00* MK 0.93 NY 1.00* ON 1.00* ! OV 0.99 PT 1.09 SC 1.00* TS 0.87 ! WF 1.00* WZ 1.00* GN 1.00* NL 1.00* ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* GC 1.00* HH 0.94 ! HN 1.00* KK 1.00* KP 1.00* LA 1.00* ! MC 1.20 MK 1.00* NY 1.00* ON 0.95 ! OV 1.00* PT 1.00* SC 1.04 TS 1.00* ! WF 1.00* WZ 1.00* GN 1.00* NL 1.00* ! ! A total of 129 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.95 GC 1.00* HH 0.96 ! HN 0.90 KK 1.00* KP 1.08 LA 1.02 ! MC 1.23 MK 1.00* NY 1.00* ON 0.99 ! OV 1.00* PT 0.95 SC 1.05 TS 1.00 ! WF 0.80 WZ 0.97 GN 1.00* NL 1.04 ! ! A total of 9 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.93 GC 1.04 HH 1.00* ! HN 1.04 KK 1.02 KP 0.95 LA 1.00 ! MC 1.00* MK 1.00* NY 1.00* ON 1.00* ! OV 0.94 PT 1.02 SC 0.97 TS 1.00* ! WF 0.96 WZ 1.00* GN 1.00* NL 0.91 ! ! A total of 9 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.99 GC 0.97 HH 1.00* ! HN 1.08 KK 0.95 KP 0.99 LA 0.94 ! MC 1.00* MK 1.01 NY 1.00* ON 1.00* ! OV 1.01 PT 0.93 SC 1.12 TS 1.03 ! WF 1.06 WZ 1.00* GN 1.00* NL 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 1.03 GC 0.94 HH 1.00* ! HN 1.00* KK 0.99 KP 1.08 LA 1.08 ! MC 1.00* MK 0.96 NY 1.00* ON 1.00* ! OV 0.95 PT 1.10 SC 1.00* TS 0.92 ! WF 1.00* WZ 1.00* GN 1.00* NL 1.00* ! ! ! Fit before self-cal, rms=0.332939Jy sigma=0.001772 ! Fit after self-cal, rms=0.295510Jy sigma=0.001566 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.204 mas, bmaj=5.281 mas, bpa=0.3989 degrees ! Estimated noise=556.007 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (39.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0341954 Jy ! Component: 100 - total flux cleaned = 0.0569862 Jy ! Component: 150 - total flux cleaned = 0.0753087 Jy ! Component: 200 - total flux cleaned = 0.0908746 Jy ! Total flux subtracted in 200 components = 0.0908746 Jy ! Clean residual min=-0.015596 max=0.023818 Jy/beam ! Clean residual mean=0.003932 rms=0.004901 Jy/beam ! Combined flux in latest and established models = 2.29 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 281 components and 2.29 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289286Jy sigma=0.001518 ! Fit after self-cal, rms=0.288976Jy sigma=0.001514 ! Inverting map ! Added new window around map position (15.5, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235964 Jy ! Component: 100 - total flux cleaned = 0.0385403 Jy ! Component: 150 - total flux cleaned = 0.0487125 Jy ! Component: 200 - total flux cleaned = 0.0572806 Jy ! Total flux subtracted in 200 components = 0.0572806 Jy ! Clean residual min=-0.014855 max=0.020422 Jy/beam ! Clean residual mean=0.003566 rms=0.004522 Jy/beam ! Combined flux in latest and established models = 2.34728 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 311 components and 2.34728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286114Jy sigma=0.001488 ! Fit after self-cal, rms=0.285906Jy sigma=0.001486 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.285906Jy sigma=0.001486 ! Fit after self-cal, rms=0.280555Jy sigma=0.001472 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.212 mas, bmaj=5.287 mas, bpa=0.4573 degrees ! Estimated noise=557.515 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147839 Jy ! Component: 100 - total flux cleaned = 0.0213459 Jy ! Component: 150 - total flux cleaned = 0.0283328 Jy ! Component: 200 - total flux cleaned = 0.0349576 Jy ! Total flux subtracted in 200 components = 0.0349576 Jy ! Clean residual min=-0.013357 max=0.019336 Jy/beam ! Clean residual mean=0.002833 rms=0.004321 Jy/beam ! Combined flux in latest and established models = 2.38224 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 331 components and 2.38224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278881Jy sigma=0.001460 ! Fit after self-cal, rms=0.278942Jy sigma=0.001459 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (108, -34.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206122 Jy ! Component: 100 - total flux cleaned = 0.0326309 Jy ! Component: 150 - total flux cleaned = 0.0403043 Jy ! Component: 200 - total flux cleaned = 0.0456714 Jy ! Total flux subtracted in 200 components = 0.0456714 Jy ! Clean residual min=-0.012335 max=0.018131 Jy/beam ! Clean residual mean=0.002593 rms=0.003981 Jy/beam ! Combined flux in latest and established models = 2.42791 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 368 components and 2.42791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.276438Jy sigma=0.001444 ! Fit after self-cal, rms=0.276407Jy sigma=0.001442 ! Inverting map ! Added new window around map position (67, -47.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0180658 Jy ! Component: 100 - total flux cleaned = 0.0295951 Jy ! Component: 150 - total flux cleaned = 0.0391791 Jy ! Component: 200 - total flux cleaned = 0.0466738 Jy ! Total flux subtracted in 200 components = 0.0466738 Jy ! Clean residual min=-0.011382 max=0.017251 Jy/beam ! Clean residual mean=0.002266 rms=0.003812 Jy/beam ! Combined flux in latest and established models = 2.47458 Jy ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 409 components and 2.47458 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274266Jy sigma=0.001430 ! Fit after self-cal, rms=0.274185Jy sigma=0.001429 ! Inverting map ! Added new window around map position (125.5, -51.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0167482 Jy ! Component: 100 - total flux cleaned = 0.0266267 Jy ! Component: 150 - total flux cleaned = 0.0343311 Jy ! Component: 200 - total flux cleaned = 0.0395343 Jy ! Total flux subtracted in 200 components = 0.0395343 Jy ! Clean residual min=-0.012163 max=0.016413 Jy/beam ! Clean residual mean=0.002088 rms=0.003651 Jy/beam ! Combined flux in latest and established models = 2.51412 Jy ! Performing phase self-cal ! Adding 61 model components to the UV plane model. ! The established model now contains 448 components and 2.51412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272547Jy sigma=0.001419 ! Fit after self-cal, rms=0.272549Jy sigma=0.001418 ! Inverting map ! Added new window around map position (126.5, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162459 Jy ! Component: 100 - total flux cleaned = 0.0258591 Jy ! Component: 150 - total flux cleaned = 0.0336455 Jy ! Component: 200 - total flux cleaned = 0.0394737 Jy ! Total flux subtracted in 200 components = 0.0394737 Jy ! Clean residual min=-0.012072 max=0.014827 Jy/beam ! Clean residual mean=0.001876 rms=0.003506 Jy/beam ! Combined flux in latest and established models = 2.55359 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 486 components and 2.55359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270994Jy sigma=0.001408 ! Fit after self-cal, rms=0.270973Jy sigma=0.001407 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270973Jy sigma=0.001407 ! Fit after self-cal, rms=0.267657Jy sigma=0.001400 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.215 mas, bmaj=5.28 mas, bpa=0.4815 degrees ! Estimated noise=557.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00883619 Jy ! Component: 100 - total flux cleaned = 0.0155109 Jy ! Component: 150 - total flux cleaned = 0.0213381 Jy ! Component: 200 - total flux cleaned = 0.0267418 Jy ! Total flux subtracted in 200 components = 0.0267418 Jy ! Clean residual min=-0.010853 max=0.014814 Jy/beam ! Clean residual mean=0.001648 rms=0.003310 Jy/beam ! Combined flux in latest and established models = 2.58033 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 507 components and 2.58033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.266699Jy sigma=0.001394 ! Fit after self-cal, rms=0.266627Jy sigma=0.001394 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (100, -49.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148961 Jy ! Component: 100 - total flux cleaned = 0.0240325 Jy ! Component: 150 - total flux cleaned = 0.0301504 Jy ! Component: 200 - total flux cleaned = 0.0354274 Jy ! Total flux subtracted in 200 components = 0.0354274 Jy ! Clean residual min=-0.010517 max=0.014844 Jy/beam ! Clean residual mean=0.001447 rms=0.003170 Jy/beam ! Combined flux in latest and established models = 2.61576 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 543 components and 2.61576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265214Jy sigma=0.001386 ! Fit after self-cal, rms=0.265206Jy sigma=0.001386 ! Inverting map ! Added new window around map position (49, -76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014128 Jy ! Component: 100 - total flux cleaned = 0.0214342 Jy ! Component: 150 - total flux cleaned = 0.0263168 Jy ! Component: 200 - total flux cleaned = 0.0311217 Jy ! Total flux subtracted in 200 components = 0.0311217 Jy ! Clean residual min=-0.011496 max=0.013863 Jy/beam ! Clean residual mean=0.001228 rms=0.003098 Jy/beam ! Combined flux in latest and established models = 2.64688 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 568 components and 2.64688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263916Jy sigma=0.001380 ! Fit after self-cal, rms=0.263959Jy sigma=0.001379 ! Inverting map ! Added new window around map position (47.5, 74). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118189 Jy ! Component: 100 - total flux cleaned = 0.0175221 Jy ! Component: 150 - total flux cleaned = 0.0219189 Jy ! Component: 200 - total flux cleaned = 0.0262705 Jy ! Total flux subtracted in 200 components = 0.0262705 Jy ! Clean residual min=-0.011496 max=0.011605 Jy/beam ! Clean residual mean=0.001037 rms=0.002981 Jy/beam ! Combined flux in latest and established models = 2.67315 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 595 components and 2.67315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263043Jy sigma=0.001374 ! Fit after self-cal, rms=0.263044Jy sigma=0.001373 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.263044Jy sigma=0.001373 ! Fit after self-cal, rms=0.262926Jy sigma=0.001371 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.593 mas, bmaj=11.65 mas, bpa=0.01101 degrees ! Estimated noise=748.257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171113 Jy ! Component: 100 - total flux cleaned = 0.0314139 Jy ! Component: 150 - total flux cleaned = 0.0440008 Jy ! Component: 200 - total flux cleaned = 0.0552472 Jy ! Total flux subtracted in 200 components = 0.0552472 Jy ! Clean residual min=-0.017321 max=0.023849 Jy/beam ! Clean residual mean=0.002326 rms=0.005884 Jy/beam ! Combined flux in latest and established models = 2.7284 Jy selfcal ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 621 components and 2.7284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261996Jy sigma=0.001368 ! Fit after self-cal, rms=0.262099Jy sigma=0.001367 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108409 Jy ! Component: 100 - total flux cleaned = 0.0204501 Jy ! Component: 150 - total flux cleaned = 0.0291293 Jy ! Component: 200 - total flux cleaned = 0.035461 Jy ! Total flux subtracted in 200 components = 0.035461 Jy ! Clean residual min=-0.018789 max=0.023224 Jy/beam ! Clean residual mean=0.001687 rms=0.005798 Jy/beam ! Combined flux in latest and established models = 2.76386 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 638 components and 2.76386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261743Jy sigma=0.001367 ! Fit after self-cal, rms=0.261801Jy sigma=0.001367 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.218 mas, bmaj=5.277 mas, bpa=0.4958 degrees ! Estimated noise=557.448 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.218 x 5.277 at 0.4958 degrees (North through East) ! Clean map min=-0.011291 max=1.0945 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261801Jy sigma=0.001367 ! Fit after self-cal, rms=0.424590Jy sigma=0.001275 ! Inverting map and beam ! Estimated beam: bmin=2.217 mas, bmaj=5.273 mas, bpa=0.5246 degrees ! Estimated noise=558.366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00238502 Jy ! Component: 100 - total flux cleaned = 0.00508455 Jy ! Component: 150 - total flux cleaned = 0.00759657 Jy ! Component: 200 - total flux cleaned = 0.00942494 Jy ! Total flux subtracted in 200 components = 0.00942494 Jy ! Clean residual min=-0.010409 max=0.011254 Jy/beam ! Clean residual mean=0.000778 rms=0.002715 Jy/beam ! Combined flux in latest and established models = 2.77329 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 665 components and 2.77329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424352Jy sigma=0.001273 ! Fit after self-cal, rms=0.424387Jy sigma=0.001273 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00179513 Jy ! Component: 100 - total flux cleaned = 0.00401575 Jy ! Component: 150 - total flux cleaned = 0.00532544 Jy ! Component: 200 - total flux cleaned = 0.0070584 Jy ! Total flux subtracted in 200 components = 0.0070584 Jy ! Clean residual min=-0.010341 max=0.011261 Jy/beam ! Clean residual mean=0.000733 rms=0.002693 Jy/beam ! Combined flux in latest and established models = 2.78034 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 686 components and 2.78034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424225Jy sigma=0.001272 ! Fit after self-cal, rms=0.424236Jy sigma=0.001272 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424236Jy sigma=0.001272 ! Fit after self-cal, rms=0.650695Jy sigma=0.001272 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.88 mas, bmaj=4.388 mas, bpa=3.377 degrees ! Estimated noise=915.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.838184 Jy ! Component: 100 - total flux cleaned = 1.12006 Jy ! Component: 150 - total flux cleaned = 1.28947 Jy ! Component: 200 - total flux cleaned = 1.4054 Jy ! Total flux subtracted in 200 components = 1.4054 Jy ! Clean residual min=-0.019850 max=0.063262 Jy/beam ! Clean residual mean=0.000482 rms=0.006624 Jy/beam ! Combined flux in latest and established models = 1.4054 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 1.4054 Jy ! Inverting map and beam ! Estimated beam: bmin=2.219 mas, bmaj=5.273 mas, bpa=0.5252 degrees ! Estimated noise=558.299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.148496 Jy ! Component: 100 - total flux cleaned = 0.254734 Jy ! Component: 150 - total flux cleaned = 0.338368 Jy ! Component: 200 - total flux cleaned = 0.408621 Jy ! Total flux subtracted in 200 components = 0.408621 Jy ! Clean residual min=-0.025883 max=0.044618 Jy/beam ! Clean residual mean=0.006734 rms=0.009922 Jy/beam ! Combined flux in latest and established models = 1.81402 Jy ! Adding 114 model components to the UV plane model. ! The established model now contains 123 components and 1.81402 Jy ! Inverting map ! Added new window around map position (8.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615243 Jy ! Component: 100 - total flux cleaned = 0.116072 Jy ! Component: 150 - total flux cleaned = 0.165097 Jy ! Component: 200 - total flux cleaned = 0.209557 Jy ! Total flux subtracted in 200 components = 0.209557 Jy ! Clean residual min=-0.019363 max=0.032774 Jy/beam ! Clean residual mean=0.005386 rms=0.007374 Jy/beam ! Combined flux in latest and established models = 2.02358 Jy ! Adding 133 model components to the UV plane model. ! The established model now contains 231 components and 2.02358 Jy ! Inverting map ! Added new window around map position (44.5, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0411412 Jy ! Component: 100 - total flux cleaned = 0.0782644 Jy ! Component: 150 - total flux cleaned = 0.112338 Jy ! Component: 200 - total flux cleaned = 0.143939 Jy ! Total flux subtracted in 200 components = 0.143939 Jy ! Clean residual min=-0.014926 max=0.024996 Jy/beam ! Clean residual mean=0.004483 rms=0.005876 Jy/beam ! Combined flux in latest and established models = 2.16752 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 312 components and 2.16752 Jy ! Inverting map ! Added new window around map position (119, -41). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0309149 Jy ! Component: 100 - total flux cleaned = 0.0587658 Jy ! Component: 150 - total flux cleaned = 0.084905 Jy ! Component: 200 - total flux cleaned = 0.109545 Jy ! Total flux subtracted in 200 components = 0.109545 Jy ! Clean residual min=-0.011895 max=0.020547 Jy/beam ! Clean residual mean=0.003813 rms=0.004905 Jy/beam ! Combined flux in latest and established models = 2.27706 Jy ! Adding 125 model components to the UV plane model. ! The established model now contains 401 components and 2.27706 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.598 mas, bmaj=11.66 mas, bpa=0.05554 degrees ! Estimated noise=748.587 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583005 Jy ! Component: 100 - total flux cleaned = 0.107774 Jy ! Component: 150 - total flux cleaned = 0.151296 Jy ! Component: 200 - total flux cleaned = 0.189931 Jy ! Total flux subtracted in 200 components = 0.189931 Jy ! Clean residual min=-0.016502 max=0.034647 Jy/beam ! Clean residual mean=0.007130 rms=0.008459 Jy/beam ! Combined flux in latest and established models = 2.46699 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0344615 Jy ! Component: 100 - total flux cleaned = 0.0653131 Jy ! Component: 150 - total flux cleaned = 0.0930538 Jy ! Component: 200 - total flux cleaned = 0.118217 Jy ! Total flux subtracted in 200 components = 0.118217 Jy ! Clean residual min=-0.014743 max=0.027399 Jy/beam ! Clean residual mean=0.005272 rms=0.006885 Jy/beam ! Combined flux in latest and established models = 2.58521 Jy ! Adding 242 model components to the UV plane model. ! The established model now contains 608 components and 2.58521 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.219 mas, bmaj=5.273 mas, bpa=0.5252 degrees ! Estimated noise=558.299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0141732 Jy ! Component: 100 - total flux cleaned = 0.0262763 Jy ! Component: 150 - total flux cleaned = 0.0374202 Jy ! Component: 200 - total flux cleaned = 0.0477785 Jy ! Total flux subtracted in 200 components = 0.0477785 Jy ! Clean residual min=-0.009352 max=0.012719 Jy/beam ! Clean residual mean=0.001655 rms=0.002910 Jy/beam ! Combined flux in latest and established models = 2.63299 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 662 components and 2.63299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.651397Jy sigma=0.001285 ! Fit after self-cal, rms=0.651817Jy sigma=0.001282 wmodel J2225-0457_S_1999_12_20_pus_map.mod ! Writing 662 model components to file: J2225-0457_S_1999_12_20_pus_map.mod wobs J2225-0457_S_1999_12_20_pus_uvs.fits ! Writing UV FITS file: J2225-0457_S_1999_12_20_pus_uvs.fits wwins J2225-0457_S_1999_12_20_pus_map.win ! wwins: Wrote 19 windows to J2225-0457_S_1999_12_20_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00583828 Jy ! Component: 100 - total flux cleaned = 0.0110555 Jy ! Component: 150 - total flux cleaned = 0.0159829 Jy ! Component: 200 - total flux cleaned = 0.0207246 Jy ! Component: 250 - total flux cleaned = 0.0253192 Jy ! Component: 300 - total flux cleaned = 0.0296099 Jy ! Component: 350 - total flux cleaned = 0.0336192 Jy ! Component: 400 - total flux cleaned = 0.0371974 Jy ! Component: 450 - total flux cleaned = 0.0408647 Jy ! Component: 500 - total flux cleaned = 0.0442952 Jy ! Component: 550 - total flux cleaned = 0.0476609 Jy ! Component: 600 - total flux cleaned = 0.0512801 Jy ! Component: 650 - total flux cleaned = 0.0543735 Jy ! Component: 700 - total flux cleaned = 0.057719 Jy ! Component: 750 - total flux cleaned = 0.0611569 Jy ! Component: 800 - total flux cleaned = 0.0643918 Jy ! Component: 850 - total flux cleaned = 0.067576 Jy ! Component: 900 - total flux cleaned = 0.0705711 Jy ! Component: 950 - total flux cleaned = 0.0733826 Jy ! Component: 1000 - total flux cleaned = 0.0762936 Jy ! Component: 1050 - total flux cleaned = 0.0790285 Jy ! Component: 1100 - total flux cleaned = 0.0818625 Jy ! Component: 1150 - total flux cleaned = 0.0847921 Jy ! Component: 1200 - total flux cleaned = 0.0875519 Jy ! Component: 1250 - total flux cleaned = 0.0901482 Jy ! Component: 1300 - total flux cleaned = 0.0927139 Jy ! Component: 1350 - total flux cleaned = 0.0953765 Jy ! Component: 1400 - total flux cleaned = 0.0978827 Jy ! Component: 1450 - total flux cleaned = 0.100238 Jy ! Component: 1500 - total flux cleaned = 0.102445 Jy ! Component: 1550 - total flux cleaned = 0.104508 Jy ! Component: 1600 - total flux cleaned = 0.10667 Jy ! Component: 1650 - total flux cleaned = 0.108692 Jy ! Component: 1700 - total flux cleaned = 0.110694 Jy ! Component: 1750 - total flux cleaned = 0.112793 Jy ! Component: 1800 - total flux cleaned = 0.114756 Jy ! Component: 1850 - total flux cleaned = 0.116813 Jy ! Component: 1900 - total flux cleaned = 0.118512 Jy ! Component: 1950 - total flux cleaned = 0.120196 Jy ! Component: 2000 - total flux cleaned = 0.121977 Jy ! Component: 2050 - total flux cleaned = 0.123522 Jy ! Component: 2100 - total flux cleaned = 0.125272 Jy ! Component: 2150 - total flux cleaned = 0.126791 Jy ! Component: 2200 - total flux cleaned = 0.128619 Jy ! Component: 2250 - total flux cleaned = 0.130324 Jy ! Component: 2300 - total flux cleaned = 0.131911 Jy ! Component: 2350 - total flux cleaned = 0.13338 Jy ! Component: 2400 - total flux cleaned = 0.134943 Jy ! Component: 2450 - total flux cleaned = 0.136595 Jy ! Component: 2500 - total flux cleaned = 0.137826 Jy ! Component: 2550 - total flux cleaned = 0.139353 Jy ! Component: 2600 - total flux cleaned = 0.140968 Jy ! Component: 2650 - total flux cleaned = 0.142272 Jy ! Component: 2700 - total flux cleaned = 0.143766 Jy ! Component: 2750 - total flux cleaned = 0.14505 Jy ! Component: 2800 - total flux cleaned = 0.14613 Jy ! Component: 2850 - total flux cleaned = 0.147787 Jy ! Component: 2900 - total flux cleaned = 0.148947 Jy ! Component: 2950 - total flux cleaned = 0.150005 Jy ! Component: 3000 - total flux cleaned = 0.151438 Jy ! Component: 3050 - total flux cleaned = 0.152765 Jy ! Component: 3100 - total flux cleaned = 0.153989 Jy ! Component: 3150 - total flux cleaned = 0.155299 Jy ! Component: 3200 - total flux cleaned = 0.156229 Jy ! Component: 3250 - total flux cleaned = 0.157522 Jy ! Component: 3300 - total flux cleaned = 0.158532 Jy ! Component: 3350 - total flux cleaned = 0.159717 Jy ! Component: 3400 - total flux cleaned = 0.160714 Jy ! Component: 3450 - total flux cleaned = 0.161975 Jy ! Component: 3500 - total flux cleaned = 0.162959 Jy ! Component: 3550 - total flux cleaned = 0.163849 Jy ! Component: 3600 - total flux cleaned = 0.165088 Jy ! Component: 3650 - total flux cleaned = 0.166055 Jy ! Component: 3700 - total flux cleaned = 0.167104 Jy ! Component: 3750 - total flux cleaned = 0.168147 Jy ! Component: 3800 - total flux cleaned = 0.169098 Jy ! Component: 3850 - total flux cleaned = 0.170129 Jy ! Component: 3900 - total flux cleaned = 0.171239 Jy ! Component: 3950 - total flux cleaned = 0.171919 Jy ! Component: 4000 - total flux cleaned = 0.173101 Jy ! Component: 4050 - total flux cleaned = 0.173941 Jy ! Total flux subtracted in 4096 components = 0.17486 Jy ! Clean residual min=-0.004642 max=0.004979 Jy/beam ! Clean residual mean=0.000615 rms=0.001688 Jy/beam ! Combined flux in latest and established models = 2.80785 Jy keep ! Adding 488 model components to the UV plane model. ! The established model now contains 1145 components and 2.80785 Jy ![Exited script file: muppet] wmap "J2225-0457_S_1999_12_20_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.219 x 5.273 at 0.5252 degrees (North through East) ! Clean map min=-0.0077487 max=1.1069 Jy/beam ! Writing clean map to FITS file: J2225-0457_S_1999_12_20_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.10693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00168764 device "J2225-0457_S_1999_12_20_pus\_map.eps/VPS" ! Attempting to open device: 'J2225-0457_S_1999_12_20_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.457386 0.457386 0.914771 1.82954 3.65908 7.31817 14.6363 29.2727 58.5453 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.005 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.219 x 5.273 at 0.5252 degrees (North through East) ! Clean map min=-0.0077487 max=1.1069 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2225-0457_S_1999_12_20_pus\_map.gif/vgif" ! Attempting to open device: 'J2225-0457_S_1999_12_20_pus_map.gif/vgif' mapplot cln quit ! Quitting program ! Log file J2225-0457_S_1999_12_20_pus_uvs.log closed on Thu Dec 20 16:47:41 2007