! Started logfile: 4C39.25_X.log on Wed May 14 17:12:02 2008 observe 4C39.25_X.edt ! Reading UV FITS file: 4C39.25_X.edt ! AN table 1: 152 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.220459 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 4C39.25 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 938 lines of history. ! ! Reading 20508 visibilities. ![@gonzo6-0.1 4C39.25_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1853 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1835 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1837 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1860 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=6.107820Jy sigma=0.085476 ! Fit after self-cal, rms=6.105488Jy sigma=0.085574 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5426 mas, bmaj=0.8806 mas, bpa=-16.13 degrees ! Estimated noise=805.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.54818 Jy ! Total flux subtracted in 50 components = 4.54818 Jy ! Clean residual min=-0.215866 max=1.582557 Jy/beam ! Clean residual mean=0.002187 rms=0.076725 Jy/beam ! Combined flux in latest and established models = 4.54818 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 4.54818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.220885Jy sigma=0.046993 ! Fit after self-cal, rms=3.220828Jy sigma=0.046992 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71754 Jy ! Total flux subtracted in 50 components = 1.71754 Jy ! Clean residual min=-0.152064 max=0.812083 Jy/beam ! Clean residual mean=0.001495 rms=0.050341 Jy/beam ! Combined flux in latest and established models = 6.26572 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 6.26572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.118681Jy sigma=0.031292 ! Fit after self-cal, rms=2.118572Jy sigma=0.031289 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.00545 Jy ! Total flux subtracted in 50 components = 1.00545 Jy ! Clean residual min=-0.121851 max=0.549722 Jy/beam ! Clean residual mean=0.001088 rms=0.037290 Jy/beam ! Combined flux in latest and established models = 7.27117 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 7.27117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.564522Jy sigma=0.023110 ! Fit after self-cal, rms=1.564229Jy sigma=0.023109 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.696237 Jy ! Total flux subtracted in 50 components = 0.696237 Jy ! Clean residual min=-0.101760 max=0.389314 Jy/beam ! Clean residual mean=0.000805 rms=0.028994 Jy/beam ! Combined flux in latest and established models = 7.96741 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 7.96741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.212868Jy sigma=0.017813 ! Fit after self-cal, rms=1.212185Jy sigma=0.017810 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.500686 Jy ! Total flux subtracted in 50 components = 0.500686 Jy ! Clean residual min=-0.088319 max=0.320182 Jy/beam ! Clean residual mean=0.000601 rms=0.023558 Jy/beam ! Combined flux in latest and established models = 8.46809 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 8.46809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.980177Jy sigma=0.014232 ! Fit after self-cal, rms=0.979903Jy sigma=0.014231 ! Inverting map ! Added new window around map position (-0.9, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.381577 Jy ! Total flux subtracted in 50 components = 0.381577 Jy ! Clean residual min=-0.076696 max=0.226282 Jy/beam ! Clean residual mean=0.000446 rms=0.019786 Jy/beam ! Combined flux in latest and established models = 8.84967 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 8.84967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.818900Jy sigma=0.011721 ! Fit after self-cal, rms=0.816169Jy sigma=0.011705 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294211 Jy ! Total flux subtracted in 50 components = 0.294211 Jy ! Clean residual min=-0.068596 max=0.186091 Jy/beam ! Clean residual mean=0.000326 rms=0.017090 Jy/beam ! Combined flux in latest and established models = 9.14388 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 9.14388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.702854Jy sigma=0.009894 ! Fit after self-cal, rms=0.701199Jy sigma=0.009885 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.229596 Jy ! Total flux subtracted in 50 components = 0.229596 Jy ! Clean residual min=-0.062332 max=0.154893 Jy/beam ! Clean residual mean=0.000232 rms=0.015215 Jy/beam ! Combined flux in latest and established models = 9.37348 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 54 components and 9.37348 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.622018Jy sigma=0.008582 ! Fit after self-cal, rms=0.620841Jy sigma=0.008575 ! Inverting map ! Added new window around map position (0.7, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.18571 Jy ! Total flux subtracted in 50 components = 0.18571 Jy ! Clean residual min=-0.057709 max=0.138865 Jy/beam ! Clean residual mean=0.000155 rms=0.013850 Jy/beam ! Combined flux in latest and established models = 9.55919 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 9.55919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.564564Jy sigma=0.007627 ! Fit after self-cal, rms=0.564199Jy sigma=0.007625 ! Inverting map ! Added new window around map position (-2.1, 0.5). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159155 Jy ! Total flux subtracted in 50 components = 0.159155 Jy ! Clean residual min=-0.053987 max=0.094580 Jy/beam ! Clean residual mean=0.000087 rms=0.012841 Jy/beam ! Combined flux in latest and established models = 9.71834 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 9.71834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.521578Jy sigma=0.006919 ! Fit after self-cal, rms=0.520460Jy sigma=0.006911 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13147 Jy ! Total flux subtracted in 50 components = 0.13147 Jy ! Clean residual min=-0.052709 max=0.079633 Jy/beam ! Clean residual mean=0.000031 rms=0.012067 Jy/beam ! Combined flux in latest and established models = 9.84981 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 70 components and 9.84981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.489477Jy sigma=0.006375 ! Fit after self-cal, rms=0.488790Jy sigma=0.006371 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111153 Jy ! Total flux subtracted in 50 components = 0.111153 Jy ! Clean residual min=-0.051713 max=0.067416 Jy/beam ! Clean residual mean=-0.000017 rms=0.011485 Jy/beam ! Combined flux in latest and established models = 9.96096 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 9.96097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466274Jy sigma=0.005968 ! Fit after self-cal, rms=0.465758Jy sigma=0.005965 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0947003 Jy ! Total flux subtracted in 50 components = 0.0947003 Jy ! Clean residual min=-0.050893 max=0.057896 Jy/beam ! Clean residual mean=-0.000057 rms=0.011042 Jy/beam ! Combined flux in latest and established models = 10.0557 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 78 components and 10.0557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.449450Jy sigma=0.005665 ! Fit after self-cal, rms=0.449030Jy sigma=0.005662 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6556 mas, bmaj=1.05 mas, bpa=-13.6 degrees ! Estimated noise=476.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118143 Jy ! Component: 100 - total flux cleaned = 0.197301 Jy ! Total flux subtracted in 100 components = 0.197301 Jy ! Clean residual min=-0.045244 max=0.047686 Jy/beam ! Clean residual mean=-0.001156 rms=0.010697 Jy/beam ! Combined flux in latest and established models = 10.253 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 38 model components to the UV plane model. ! The established model now contains 101 components and 10.253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.424833Jy sigma=0.005165 ! Fit after self-cal, rms=0.423661Jy sigma=0.005154 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 GC 0.98 HH 1.00* ! HN 0.99 KK 1.00 KP 0.98 LA 0.99 ! MC 0.93 MK 0.99 NL 0.99 NY 0.95 ! ON 0.96 OV 0.98 PT 0.99 SC 1.03 ! WF 1.01 WZ 1.06 ! ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 GC 1.01 HH 1.00* ! HN 0.98 KK 1.03 KP 0.99 LA 1.00 ! MC 1.00 MK 0.96 NL 0.97 NY 0.96 ! ON 0.98 OV 0.97 PT 1.01 SC 1.04 ! WF 1.00 WZ 1.05 ! ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 GC 1.01 HH 1.00* ! HN 0.99 KK 1.02 KP 1.01 LA 1.00 ! MC 0.99 MK 0.95 NL 0.98 NY 0.96 ! ON 0.98 OV 0.99 PT 1.01 SC 1.06 ! WF 1.07 WZ 1.05 ! ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 GC 1.07 HH 1.00* ! HN 0.98 KK 1.02 KP 1.00 LA 1.01 ! MC 1.03 MK 0.93 NL 1.00 NY 0.98 ! ON 0.97 OV 0.99 PT 1.03 SC 1.12 ! WF 1.09 WZ 1.08 ! ! ! Fit before self-cal, rms=0.423661Jy sigma=0.005154 ! Fit after self-cal, rms=0.321715Jy sigma=0.003823 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.659 mas, bmaj=1.05 mas, bpa=-13.78 degrees ! Estimated noise=476.751 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363963 Jy ! Component: 100 - total flux cleaned = 0.0539159 Jy ! Total flux subtracted in 100 components = 0.0539159 Jy ! Clean residual min=-0.035756 max=0.029667 Jy/beam ! Clean residual mean=-0.000793 rms=0.007163 Jy/beam ! Combined flux in latest and established models = 10.3069 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 10.3069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.311696Jy sigma=0.003650 ! Fit after self-cal, rms=0.310431Jy sigma=0.003635 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110924 Jy ! Component: 100 - total flux cleaned = 0.0178019 Jy ! Total flux subtracted in 100 components = 0.0178019 Jy ! Clean residual min=-0.031317 max=0.027674 Jy/beam ! Clean residual mean=-0.000837 rms=0.006951 Jy/beam ! Combined flux in latest and established models = 10.3247 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 121 components and 10.3247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305997Jy sigma=0.003567 ! Fit after self-cal, rms=0.184695Jy sigma=0.001976 ! Inverting map and beam ! Estimated beam: bmin=0.6626 mas, bmaj=1.052 mas, bpa=-13.23 degrees ! Estimated noise=479.037 mJy/beam. ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173565 Jy ! Component: 100 - total flux cleaned = 0.0269721 Jy ! Total flux subtracted in 100 components = 0.0269721 Jy ! Clean residual min=-0.023941 max=0.018096 Jy/beam ! Clean residual mean=-0.000033 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 10.3517 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 130 components and 10.3517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178190Jy sigma=0.001874 ! Fit after self-cal, rms=0.175605Jy sigma=0.001844 ! Inverting map and beam ! Estimated beam: bmin=0.6628 mas, bmaj=1.053 mas, bpa=-13.21 degrees ! Estimated noise=479.026 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857008 Jy ! Component: 100 - total flux cleaned = 0.0139022 Jy ! Total flux subtracted in 100 components = 0.0139022 Jy ! Clean residual min=-0.022724 max=0.016565 Jy/beam ! Clean residual mean=-0.000038 rms=0.002296 Jy/beam ! Combined flux in latest and established models = 10.3656 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 135 components and 10.3656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171503Jy sigma=0.001786 ! Fit after self-cal, rms=0.171003Jy sigma=0.001781 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 4C39.25_X ! Writing UV FITS file: 4C39.25_X.uvf ! Writing 135 model components to file: 4C39.25_X.mod ! wwins: Wrote 4 windows to 4C39.25_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6628 x 1.053 at -13.21 degrees (North through East) ! Clean map min=-0.009954 max=6.5015 Jy/beam ! Writing clean map to FITS file: 4C39.25_X.fits ! Writing difmap environment to: 4C39.25_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 4C39.25_X] device 4C39.25_Xuv.ps/vps,1,2 ! Attempting to open device: '4C39.25_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 4C39.25_Xim.ps/vps ! Attempting to open device: '4C39.25_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=0.6628 mas, bmaj=1.053 mas, bpa=-13.21 degrees ! Estimated noise=479.026 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6628 x 1.053 at -13.21 degrees (North through East) ! Clean map min=-0.009954 max=6.5015 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.1] quit ! Quitting program ! Log file 4C39.25_X.log closed on Wed May 14 17:12:20 2008