! Started logfile: 1803+784_X.log on Wed May 14 15:52:36 2008
observe 1803+784_X.edt
! Reading UV FITS file: 1803+784_X.edt
! AN table 1: 311 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.493327 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 1803+784
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 939 lines of history.
! 
! Reading 93896 visibilities.
![@gonzo6-0.1 1803+784_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2387 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2315 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2317 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2321 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.106158Jy  sigma=0.016084
! Fit after  self-cal, rms=1.106073Jy  sigma=0.016085
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5398 mas, bmaj=0.5901 mas, bpa=46.1 degrees
! Estimated noise=425.684 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.40812 Jy
! Total flux subtracted in 50 components = 1.40812 Jy
! Clean residual min=-0.037423 max=0.396379 Jy/beam
! Clean residual mean=0.000130 rms=0.009681 Jy/beam
! Combined flux in latest and established models = 1.40812 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 1.40812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.761835Jy  sigma=0.011267
! Fit after  self-cal, rms=0.761708Jy  sigma=0.011266
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.379897 Jy
! Total flux subtracted in 50 components = 0.379897 Jy
! Clean residual min=-0.022127 max=0.166065 Jy/beam
! Clean residual mean=0.000100 rms=0.006032 Jy/beam
! Combined flux in latest and established models = 1.78801 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 6 components and 1.78801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.509001Jy  sigma=0.007475
! Fit after  self-cal, rms=0.506851Jy  sigma=0.007464
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.186235 Jy
! Total flux subtracted in 50 components = 0.186235 Jy
! Clean residual min=-0.020198 max=0.107321 Jy/beam
! Clean residual mean=0.000085 rms=0.004719 Jy/beam
! Combined flux in latest and established models = 1.97425 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 1.97425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.407610Jy  sigma=0.005856
! Fit after  self-cal, rms=0.405238Jy  sigma=0.005843
! Inverting map 
! Added new window around map position (-0.8, 0.2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.123106 Jy
! Total flux subtracted in 50 components = 0.123106 Jy
! Clean residual min=-0.019496 max=0.069337 Jy/beam
! Clean residual mean=0.000075 rms=0.004028 Jy/beam
! Combined flux in latest and established models = 2.09736 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 24 components and 2.09736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.348067Jy  sigma=0.004911
! Fit after  self-cal, rms=0.345721Jy  sigma=0.004897
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0917378 Jy
! Total flux subtracted in 50 components = 0.0917379 Jy
! Clean residual min=-0.017481 max=0.065151 Jy/beam
! Clean residual mean=0.000067 rms=0.003551 Jy/beam
! Combined flux in latest and established models = 2.18909 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 33 components and 2.18909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.307662Jy  sigma=0.004246
! Fit after  self-cal, rms=0.306467Jy  sigma=0.004239
! Inverting map 
! Added new window around map position (-1.6, -0.3).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0758535 Jy
! Total flux subtracted in 50 components = 0.0758535 Jy
! Clean residual min=-0.016118 max=0.043409 Jy/beam
! Clean residual mean=0.000060 rms=0.003198 Jy/beam
! Combined flux in latest and established models = 2.26495 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 43 components and 2.26495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.278278Jy  sigma=0.003752
! Fit after  self-cal, rms=0.277276Jy  sigma=0.003746
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0606072 Jy
! Total flux subtracted in 50 components = 0.0606072 Jy
! Clean residual min=-0.015238 max=0.035806 Jy/beam
! Clean residual mean=0.000055 rms=0.002943 Jy/beam
! Combined flux in latest and established models = 2.32556 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 52 components and 2.32555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.257218Jy  sigma=0.003379
! Fit after  self-cal, rms=0.256679Jy  sigma=0.003376
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.049747 Jy
! Total flux subtracted in 50 components = 0.049747 Jy
! Clean residual min=-0.014635 max=0.029707 Jy/beam
! Clean residual mean=0.000050 rms=0.002761 Jy/beam
! Combined flux in latest and established models = 2.3753 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 63 components and 2.3753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242151Jy  sigma=0.003101
! Fit after  self-cal, rms=0.241725Jy  sigma=0.003099
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0418818 Jy
! Total flux subtracted in 50 components = 0.0418818 Jy
! Clean residual min=-0.014181 max=0.025338 Jy/beam
! Clean residual mean=0.000046 rms=0.002623 Jy/beam
! Combined flux in latest and established models = 2.41718 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 69 components and 2.41718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.231004Jy  sigma=0.002889
! Fit after  self-cal, rms=0.230671Jy  sigma=0.002887
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0356825 Jy
! Total flux subtracted in 50 components = 0.0356825 Jy
! Clean residual min=-0.013874 max=0.021613 Jy/beam
! Clean residual mean=0.000043 rms=0.002515 Jy/beam
! Combined flux in latest and established models = 2.45287 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 71 components and 2.45287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.222696Jy  sigma=0.002726
! Fit after  self-cal, rms=0.222427Jy  sigma=0.002725
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.030492 Jy
! Total flux subtracted in 50 components = 0.030492 Jy
! Clean residual min=-0.013519 max=0.018514 Jy/beam
! Clean residual mean=0.000040 rms=0.002432 Jy/beam
! Combined flux in latest and established models = 2.48336 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 2.48336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216528Jy  sigma=0.002601
! Fit after  self-cal, rms=0.216311Jy  sigma=0.002600
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0260553 Jy
! Total flux subtracted in 50 components = 0.0260553 Jy
! Clean residual min=-0.013222 max=0.015827 Jy/beam
! Clean residual mean=0.000038 rms=0.002368 Jy/beam
! Combined flux in latest and established models = 2.50941 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 74 components and 2.50941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212003Jy  sigma=0.002507
! Fit after  self-cal, rms=0.211842Jy  sigma=0.002506
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0222977 Jy
! Total flux subtracted in 50 components = 0.0222977 Jy
! Clean residual min=-0.012889 max=0.014322 Jy/beam
! Clean residual mean=0.000036 rms=0.002320 Jy/beam
! Combined flux in latest and established models = 2.53171 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 74 components and 2.53171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.208730Jy  sigma=0.002436
! Fit after  self-cal, rms=0.208606Jy  sigma=0.002435
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019095 Jy
! Total flux subtracted in 50 components = 0.019095 Jy
! Clean residual min=-0.012557 max=0.013811 Jy/beam
! Clean residual mean=0.000034 rms=0.002283 Jy/beam
! Combined flux in latest and established models = 2.55081 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 77 components and 2.55081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206352Jy  sigma=0.002383
! Fit after  self-cal, rms=0.206256Jy  sigma=0.002382
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7114 mas, bmaj=0.8609 mas, bpa=46.29 degrees
! Estimated noise=201.627 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0344952 Jy
! Component: 100  -  total flux cleaned = 0.0549969 Jy
! Total flux subtracted in 100 components = 0.0549969 Jy
! Clean residual min=-0.010396 max=0.016391 Jy/beam
! Clean residual mean=0.000838 rms=0.002686 Jy/beam
! Combined flux in latest and established models = 2.6058 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 96 components and 2.6058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201991Jy  sigma=0.002281
! Fit after  self-cal, rms=0.201542Jy  sigma=0.002274
! Inverting map 
! Added new window around map position (-2.9, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191704 Jy
! Component: 100  -  total flux cleaned = 0.0322938 Jy
! Total flux subtracted in 100 components = 0.0322938 Jy
! Clean residual min=-0.010248 max=0.013625 Jy/beam
! Clean residual mean=0.000729 rms=0.002558 Jy/beam
! Combined flux in latest and established models = 2.6381 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 107 components and 2.6381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.199851Jy  sigma=0.002243
! Fit after  self-cal, rms=0.199717Jy  sigma=0.002241
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     GC        0.96     HH        1.00*    
!   HN        0.96     KK        1.03     KP        0.98     LA        1.00     
!   MC        1.00     MK        0.98     NL        0.99     NY        0.95     
!   ON        0.93     OV        0.98     PT        0.98     SC        1.15     
!   WF        0.97     WZ        1.02     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     GC        0.98     HH        1.00*    
!   HN        0.95     KK        1.06     KP        0.99     LA        1.01     
!   MC        0.98     MK        0.96     NL        0.97     NY        0.96     
!   ON        0.94     OV        0.97     PT        1.01     SC        1.14     
!   WF        0.97     WZ        1.03     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     GC        0.98     HH        1.00*    
!   HN        0.96     KK        1.05     KP        1.01     LA        1.01     
!   MC        1.00     MK        0.95     NL        0.98     NY        0.96     
!   ON        0.96     OV        0.99     PT        1.00     SC        1.18     
!   WF        1.06     WZ        1.03     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     GC        1.03     HH        1.00*    
!   HN        0.95     KK        1.04     KP        1.00     LA        1.02     
!   MC        1.05     MK        0.93     NL        1.00     NY        0.98     
!   ON        0.95     OV        0.99     PT        1.03     SC        1.25     
!   WF        1.09     WZ        1.06     
! 
! 
! Fit before self-cal, rms=0.199717Jy  sigma=0.002241
! Fit after  self-cal, rms=0.149160Jy  sigma=0.001604
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7148 mas, bmaj=0.8645 mas, bpa=46.28 degrees
! Estimated noise=201.326 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00927472 Jy
! Component: 100  -  total flux cleaned = 0.0116045 Jy
! Total flux subtracted in 100 components = 0.0116045 Jy
! Clean residual min=-0.006542 max=0.009983 Jy/beam
! Clean residual mean=0.000428 rms=0.001496 Jy/beam
! Combined flux in latest and established models = 2.6497 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 124 components and 2.6497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.148166Jy  sigma=0.001585
! Fit after  self-cal, rms=0.148045Jy  sigma=0.001583
! Inverting map 
! Added new window around map position (-7.3, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00943689 Jy
! Component: 100  -  total flux cleaned = 0.0133063 Jy
! Total flux subtracted in 100 components = 0.0133063 Jy
! Clean residual min=-0.006995 max=0.006303 Jy/beam
! Clean residual mean=0.000385 rms=0.001408 Jy/beam
! Combined flux in latest and established models = 2.66301 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 146 components and 2.66301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.147339Jy  sigma=0.001570
! Fit after  self-cal, rms=0.147293Jy  sigma=0.001569
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0031457 Jy
! Component: 100  -  total flux cleaned = 0.0060878 Jy
! Total flux subtracted in 100 components = 0.0060878 Jy
! Clean residual min=-0.006993 max=0.005982 Jy/beam
! Clean residual mean=0.000366 rms=0.001372 Jy/beam
! Combined flux in latest and established models = 2.6691 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 31 model components to the UV plane model.
! The established model now contains 157 components and 2.6691 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146954Jy  sigma=0.001563
! Fit after  self-cal, rms=0.120371Jy  sigma=0.001262
! Inverting map and beam 
! Estimated beam: bmin=0.7152 mas, bmaj=0.8643 mas, bpa=46.11 degrees
! Estimated noise=201.534 mJy/beam.
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00508094 Jy
! Component: 100  -  total flux cleaned = 0.00739492 Jy
! Total flux subtracted in 100 components = 0.00739492 Jy
! Clean residual min=-0.003450 max=0.003925 Jy/beam
! Clean residual mean=0.000229 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 2.67649 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 169 components and 2.67649 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120023Jy  sigma=0.001255
! Fit after  self-cal, rms=0.119398Jy  sigma=0.001250
! Inverting map and beam 
! Estimated beam: bmin=0.7153 mas, bmaj=0.8644 mas, bpa=46.14 degrees
! Estimated noise=201.526 mJy/beam.
! Added new window around map position (-5.6, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00362997 Jy
! Component: 100  -  total flux cleaned = 0.0053995 Jy
! Total flux subtracted in 100 components = 0.0053995 Jy
! Clean residual min=-0.003091 max=0.003322 Jy/beam
! Clean residual mean=0.000209 rms=0.000514 Jy/beam
! Combined flux in latest and established models = 2.68189 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 179 components and 2.68189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119174Jy  sigma=0.001246
! Fit after  self-cal, rms=0.119026Jy  sigma=0.001244
! Inverting map and beam 
! Estimated beam: bmin=0.7154 mas, bmaj=0.8644 mas, bpa=46.16 degrees
! Estimated noise=201.527 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192689 Jy
! Component: 100  -  total flux cleaned = 0.00344966 Jy
! Total flux subtracted in 100 components = 0.00344966 Jy
! Clean residual min=-0.002878 max=0.003124 Jy/beam
! Clean residual mean=0.000197 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 2.68534 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 191 components and 2.68534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118866Jy  sigma=0.001242
! Fit after  self-cal, rms=0.118834Jy  sigma=0.001241
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 1803+784_X
! Writing UV FITS file: 1803+784_X.uvf
! Writing 191 model components to file: 1803+784_X.mod
! wwins: Wrote 6 windows to 1803+784_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7154 x 0.8644 at 46.16 degrees (North through East)
! Clean map  min=-0.0015251  max=1.9373 Jy/beam
! Writing clean map to FITS file: 1803+784_X.fits
! Writing difmap environment to: 1803+784_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 1803+784_X]
device 1803+784_Xuv.ps/vps,1,2
! Attempting to open device: '1803+784_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 1803+784_Xim.ps/vps
! Attempting to open device: '1803+784_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.7154 mas, bmaj=0.8644 mas, bpa=46.16 degrees
! Estimated noise=201.527 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7154 x 0.8644 at 46.16 degrees (North through East)
! Clean map  min=-0.0015251  max=1.9373 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.1]
quit
! Quitting program
! Log file 1803+784_X.log closed on Wed May 14 15:53:11 2008