! Started logfile: 0014+813_X.log on Tue May 13 15:03:19 2008
observe 0014+813_X.edt
! Reading UV FITS file: 0014+813_X.edt
! AN table 1: 98 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.502001 visibilities/baseline/integration-bin.
! Found source: 0014+813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 946 lines of history.
! 
! Reading 30108 visibilities.
![@gonzo8-0.1 0014+813_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 8.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 993 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 969 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 970 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 969 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.514898Jy  sigma=0.006976
! Fit after  self-cal, rms=0.514161Jy  sigma=0.006966
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5166 mas, bmaj=0.7207 mas, bpa=10.88 degrees
! Estimated noise=895.509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.351066 Jy
! Total flux subtracted in 50 components = 0.351066 Jy
! Clean residual min=-0.015230 max=0.103249 Jy/beam
! Clean residual mean=-0.000022 rms=0.004626 Jy/beam
! Combined flux in latest and established models = 0.351066 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.351066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.218087Jy  sigma=0.003376
! Fit after  self-cal, rms=0.218013Jy  sigma=0.003375
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109095 Jy
! Total flux subtracted in 50 components = 0.109095 Jy
! Clean residual min=-0.009465 max=0.050108 Jy/beam
! Clean residual mean=-0.000014 rms=0.002902 Jy/beam
! Combined flux in latest and established models = 0.460161 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 11 components and 0.460161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151395Jy  sigma=0.002305
! Fit after  self-cal, rms=0.151299Jy  sigma=0.002304
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0586773 Jy
! Total flux subtracted in 50 components = 0.0586773 Jy
! Clean residual min=-0.007885 max=0.031325 Jy/beam
! Clean residual mean=-0.000010 rms=0.002171 Jy/beam
! Combined flux in latest and established models = 0.518838 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.518838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.123159Jy  sigma=0.001812
! Fit after  self-cal, rms=0.123050Jy  sigma=0.001812
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.039923 Jy
! Total flux subtracted in 50 components = 0.039923 Jy
! Clean residual min=-0.006867 max=0.022071 Jy/beam
! Clean residual mean=-0.000008 rms=0.001729 Jy/beam
! Combined flux in latest and established models = 0.558761 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 25 components and 0.558761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107222Jy  sigma=0.001519
! Fit after  self-cal, rms=0.107148Jy  sigma=0.001518
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287786 Jy
! Total flux subtracted in 50 components = 0.0287786 Jy
! Clean residual min=-0.006226 max=0.016383 Jy/beam
! Clean residual mean=-0.000007 rms=0.001449 Jy/beam
! Combined flux in latest and established models = 0.58754 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.58754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097780Jy  sigma=0.001336
! Fit after  self-cal, rms=0.097734Jy  sigma=0.001336
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0214574 Jy
! Total flux subtracted in 50 components = 0.0214574 Jy
! Clean residual min=-0.005780 max=0.013688 Jy/beam
! Clean residual mean=-0.000005 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.608997 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 34 components and 0.608997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092074Jy  sigma=0.001221
! Fit after  self-cal, rms=0.092033Jy  sigma=0.001221
! Inverting map 
! Added new window around map position (0, -0.9).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0167502 Jy
! Total flux subtracted in 50 components = 0.0167502 Jy
! Clean residual min=-0.005398 max=0.009663 Jy/beam
! Clean residual mean=-0.000005 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.625748 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 42 components and 0.625748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088494Jy  sigma=0.001147
! Fit after  self-cal, rms=0.088449Jy  sigma=0.001146
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129237 Jy
! Total flux subtracted in 50 components = 0.0129237 Jy
! Clean residual min=-0.005118 max=0.007518 Jy/beam
! Clean residual mean=-0.000004 rms=0.001052 Jy/beam
! Combined flux in latest and established models = 0.638671 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.638671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086271Jy  sigma=0.001099
! Fit after  self-cal, rms=0.086237Jy  sigma=0.001099
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6589 mas, bmaj=0.9374 mas, bpa=7.605 degrees
! Estimated noise=472.759 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0187851 Jy
! Component: 100  -  total flux cleaned = 0.0299073 Jy
! Total flux subtracted in 100 components = 0.0299073 Jy
! Clean residual min=-0.002782 max=0.005735 Jy/beam
! Clean residual mean=0.000035 rms=0.000738 Jy/beam
! Combined flux in latest and established models = 0.668579 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 68 components and 0.668579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083145Jy  sigma=0.001028
! Fit after  self-cal, rms=0.083091Jy  sigma=0.001027
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00715337 Jy
! Component: 100  -  total flux cleaned = 0.0116375 Jy
! Total flux subtracted in 100 components = 0.0116375 Jy
! Clean residual min=-0.002502 max=0.002681 Jy/beam
! Clean residual mean=0.000018 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.680216 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 82 components and 0.680216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082628Jy  sigma=0.001016
! Fit after  self-cal, rms=0.082607Jy  sigma=0.001016
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.01     KP        1.00     LA        1.00     
!   MC        0.99     MK        1.01     NL        1.00     NY        0.99     
!   ON        1.00     OV        1.00     PT        0.99     SC        1.01     
!   WF        0.99     WZ        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        0.99     MK        1.01     NL        1.00     NY        1.00     
!   ON        0.99     OV        1.00     PT        0.99     SC        1.00     
!   WF        0.99     WZ        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        0.99     MK        1.01     NL        1.00     NY        0.99     
!   ON        1.01     OV        1.00     PT        1.00     SC        1.00     
!   WF        1.00     WZ        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.01     HH        1.00*    
!   HN        1.00     KK        0.99     KP        1.00     LA        0.99     
!   MC        1.00     MK        1.00     NL        0.99     NY        1.00     
!   ON        1.00     OV        1.00     PT        0.99     SC        1.00     
!   WF        1.00     WZ        1.01     
! 
! 
! Fit before self-cal, rms=0.082607Jy  sigma=0.001016
! Fit after  self-cal, rms=0.082301Jy  sigma=0.001014
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6592 mas, bmaj=0.9391 mas, bpa=7.528 degrees
! Estimated noise=470.989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205195 Jy
! Component: 100  -  total flux cleaned = 0.00237248 Jy
! Total flux subtracted in 100 components = 0.00237248 Jy
! Clean residual min=-0.002286 max=0.002603 Jy/beam
! Clean residual mean=0.000015 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.682589 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 86 components and 0.682589 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082269Jy  sigma=0.001013
! Fit after  self-cal, rms=0.082263Jy  sigma=0.001013
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000522546 Jy
! Component: 100  -  total flux cleaned = 0.00059085 Jy
! Total flux subtracted in 100 components = 0.00059085 Jy
! Clean residual min=-0.002259 max=0.002609 Jy/beam
! Clean residual mean=0.000014 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.683179 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 88 components and 0.683179 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082250Jy  sigma=0.001013
! Fit after  self-cal, rms=0.081806Jy  sigma=0.001007
! Inverting map and beam 
! Estimated beam: bmin=0.6588 mas, bmaj=0.9389 mas, bpa=7.543 degrees
! Estimated noise=471.294 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127634 Jy
! Component: 100  -  total flux cleaned = 0.00157143 Jy
! Total flux subtracted in 100 components = 0.00157143 Jy
! Clean residual min=-0.002227 max=0.002517 Jy/beam
! Clean residual mean=0.000011 rms=0.000507 Jy/beam
! Combined flux in latest and established models = 0.684751 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 91 components and 0.684751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081784Jy  sigma=0.001007
! Fit after  self-cal, rms=0.081785Jy  sigma=0.001007
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0014+813_X
! Writing UV FITS file: 0014+813_X.uvf
! Writing 91 model components to file: 0014+813_X.mod
! wwins: Wrote 2 windows to 0014+813_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6588 x 0.9389 at 7.543 degrees (North through East)
! Clean map  min=-0.0021205  max=0.50698 Jy/beam
! Writing clean map to FITS file: 0014+813_X.fits
! Writing difmap environment to: 0014+813_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0014+813_X]
device 0014+813_Xuv.ps/vps,1,2
! Attempting to open device: '0014+813_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0014+813_Xim.ps/vps
! Attempting to open device: '0014+813_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.6588 mas, bmaj=0.9389 mas, bpa=7.543 degrees
! Estimated noise=471.294 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6588 x 0.9389 at 7.543 degrees (North through East)
! Clean map  min=-0.0021205  max=0.50698 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo8-0.1]
quit
! Quitting program
! Log file 0014+813_X.log closed on Tue May 13 15:03:32 2008