! Started logfile: VR422201_S.log on Thu May  8 13:16:53 2008
observe VR422201_S.edt
! Reading UV FITS file: VR422201_S.edt
! AN table 1: 166 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.162296 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: VR422201
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 963 lines of history.
! 
! Reading 16488 visibilities.
![@gonzo7-0.4 VR422201_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 7.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2396 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2414 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2417 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2427 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.991624Jy  sigma=0.012786
! Fit after  self-cal, rms=0.992235Jy  sigma=0.012807
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.197 mas, bmaj=4.373 mas, bpa=-15.48 degrees
! Estimated noise=1288.46 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.28855 Jy
! Total flux subtracted in 50 components = 1.28855 Jy
! Clean residual min=-0.064593 max=0.428499 Jy/beam
! Clean residual mean=0.000190 rms=0.021668 Jy/beam
! Combined flux in latest and established models = 1.28855 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.28855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.781623Jy  sigma=0.010056
! Fit after  self-cal, rms=0.781627Jy  sigma=0.010056
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.463838 Jy
! Total flux subtracted in 50 components = 0.463838 Jy
! Clean residual min=-0.042194 max=0.212057 Jy/beam
! Clean residual mean=0.000136 rms=0.012800 Jy/beam
! Combined flux in latest and established models = 1.75238 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 13 components and 1.75238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.488263Jy  sigma=0.006190
! Fit after  self-cal, rms=0.488238Jy  sigma=0.006190
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.246968 Jy
! Total flux subtracted in 50 components = 0.246968 Jy
! Clean residual min=-0.031432 max=0.128378 Jy/beam
! Clean residual mean=0.000110 rms=0.008836 Jy/beam
! Combined flux in latest and established models = 1.99935 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 1.99935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.354015Jy  sigma=0.004382
! Fit after  self-cal, rms=0.353126Jy  sigma=0.004377
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15843 Jy
! Total flux subtracted in 50 components = 0.15843 Jy
! Clean residual min=-0.024468 max=0.085132 Jy/beam
! Clean residual mean=0.000095 rms=0.006545 Jy/beam
! Combined flux in latest and established models = 2.15778 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 2.15778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277415Jy  sigma=0.003349
! Fit after  self-cal, rms=0.276429Jy  sigma=0.003343
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.107981 Jy
! Total flux subtracted in 50 components = 0.107981 Jy
! Clean residual min=-0.019811 max=0.062126 Jy/beam
! Clean residual mean=0.000085 rms=0.005159 Jy/beam
! Combined flux in latest and established models = 2.26576 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 42 components and 2.26576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.231427Jy  sigma=0.002728
! Fit after  self-cal, rms=0.230832Jy  sigma=0.002725
! Inverting map 
! Added new window around map position (0.8, -4.8).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0783339 Jy
! Total flux subtracted in 50 components = 0.0783339 Jy
! Clean residual min=-0.016936 max=0.044154 Jy/beam
! Clean residual mean=0.000078 rms=0.004258 Jy/beam
! Combined flux in latest and established models = 2.3441 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 2.3441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.201895Jy  sigma=0.002328
! Fit after  self-cal, rms=0.201071Jy  sigma=0.002322
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0592399 Jy
! Total flux subtracted in 50 components = 0.0592399 Jy
! Clean residual min=-0.014597 max=0.036021 Jy/beam
! Clean residual mean=0.000072 rms=0.003631 Jy/beam
! Combined flux in latest and established models = 2.40334 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 72 components and 2.40334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.181559Jy  sigma=0.002052
! Fit after  self-cal, rms=0.180972Jy  sigma=0.002048
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0466774 Jy
! Total flux subtracted in 50 components = 0.0466774 Jy
! Clean residual min=-0.012737 max=0.032826 Jy/beam
! Clean residual mean=0.000067 rms=0.003185 Jy/beam
! Combined flux in latest and established models = 2.45001 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 80 components and 2.45001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167362Jy  sigma=0.001857
! Fit after  self-cal, rms=0.166938Jy  sigma=0.001854
! Inverting map 
! Added new window around map position (4, -5.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0392231 Jy
! Total flux subtracted in 50 components = 0.0392231 Jy
! Clean residual min=-0.011364 max=0.022935 Jy/beam
! Clean residual mean=0.000063 rms=0.002838 Jy/beam
! Combined flux in latest and established models = 2.48924 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 2.48924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156630Jy  sigma=0.001707
! Fit after  self-cal, rms=0.156307Jy  sigma=0.001705
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320105 Jy
! Total flux subtracted in 50 components = 0.0320105 Jy
! Clean residual min=-0.010304 max=0.019093 Jy/beam
! Clean residual mean=0.000059 rms=0.002580 Jy/beam
! Combined flux in latest and established models = 2.52125 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 2.52125 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149049Jy  sigma=0.001599
! Fit after  self-cal, rms=0.148824Jy  sigma=0.001598
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0268607 Jy
! Total flux subtracted in 50 components = 0.0268607 Jy
! Clean residual min=-0.009457 max=0.016203 Jy/beam
! Clean residual mean=0.000055 rms=0.002380 Jy/beam
! Combined flux in latest and established models = 2.54811 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 2.54811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143453Jy  sigma=0.001518
! Fit after  self-cal, rms=0.143272Jy  sigma=0.001517
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226868 Jy
! Total flux subtracted in 50 components = 0.0226868 Jy
! Clean residual min=-0.008720 max=0.013953 Jy/beam
! Clean residual mean=0.000053 rms=0.002227 Jy/beam
! Combined flux in latest and established models = 2.57079 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 105 components and 2.57079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139279Jy  sigma=0.001457
! Fit after  self-cal, rms=0.139144Jy  sigma=0.001456
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.604 mas, bmaj=5.239 mas, bpa=-15.82 degrees
! Estimated noise=774.891 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0321773 Jy
! Component: 100  -  total flux cleaned = 0.0551115 Jy
! Total flux subtracted in 100 components = 0.0551115 Jy
! Clean residual min=-0.008561 max=0.016211 Jy/beam
! Clean residual mean=0.001073 rms=0.002594 Jy/beam
! Combined flux in latest and established models = 2.62591 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 121 components and 2.62591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131762Jy  sigma=0.001342
! Fit after  self-cal, rms=0.131286Jy  sigma=0.001337
! Inverting map 
! Added new window around map position (4.8, -11.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0198557 Jy
! Component: 100  -  total flux cleaned = 0.0350905 Jy
! Total flux subtracted in 100 components = 0.0350905 Jy
! Clean residual min=-0.006886 max=0.011228 Jy/beam
! Clean residual mean=0.000906 rms=0.002102 Jy/beam
! Combined flux in latest and established models = 2.661 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 146 components and 2.661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128171Jy  sigma=0.001289
! Fit after  self-cal, rms=0.127967Jy  sigma=0.001288
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        1.00     MK        0.99     NL        1.00     NY        1.00     
!   ON        1.01     OV        1.00     PT        1.00     SC        1.00     
!   WF        1.00     WZ        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        1.00     MK        0.99     NL        1.00     NY        1.00     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.00     
!   WF        1.00     WZ        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        1.00     MK        1.00     NL        1.00     NY        1.00     
!   ON        1.01     OV        1.00     PT        1.00     SC        1.01     
!   WF        1.00     WZ        1.00     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        0.99     LA        1.00*    
!   MC        1.00     MK        1.00     NL        1.00     NY        1.00     
!   ON        1.02     OV        1.00     PT        1.00     SC        1.01     
!   WF        1.00     WZ        1.00     
! 
! 
! Fit before self-cal, rms=0.127967Jy  sigma=0.001288
! Fit after  self-cal, rms=0.127120Jy  sigma=0.001281
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.609 mas, bmaj=5.244 mas, bpa=-15.87 degrees
! Estimated noise=772.229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0121395 Jy
! Component: 100  -  total flux cleaned = 0.0212075 Jy
! Total flux subtracted in 100 components = 0.0212075 Jy
! Clean residual min=-0.006165 max=0.010741 Jy/beam
! Clean residual mean=0.000735 rms=0.001765 Jy/beam
! Combined flux in latest and established models = 2.6822 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 177 components and 2.6822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.125954Jy  sigma=0.001263
! Fit after  self-cal, rms=0.125847Jy  sigma=0.001262
! Inverting map 
! Added new window around map position (3.2, -26.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104806 Jy
! Component: 100  -  total flux cleaned = 0.0179317 Jy
! Total flux subtracted in 100 components = 0.0179317 Jy
! Clean residual min=-0.006079 max=0.008238 Jy/beam
! Clean residual mean=0.000648 rms=0.001601 Jy/beam
! Combined flux in latest and established models = 2.70014 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 203 components and 2.70014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124967Jy  sigma=0.001249
! Fit after  self-cal, rms=0.124922Jy  sigma=0.001248
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (12.4, -12.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00864479 Jy
! Component: 100  -  total flux cleaned = 0.015145 Jy
! Total flux subtracted in 100 components = 0.015145 Jy
! Clean residual min=-0.006047 max=0.007155 Jy/beam
! Clean residual mean=0.000575 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 2.71528 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 224 components and 2.71528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124312Jy  sigma=0.001239
! Fit after  self-cal, rms=0.122226Jy  sigma=0.001216
! Inverting map and beam 
! Estimated beam: bmin=2.606 mas, bmaj=5.255 mas, bpa=-15.94 degrees
! Estimated noise=773.617 mJy/beam.
! Added new window around map position (-2.8, -6.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00830291 Jy
! Component: 100  -  total flux cleaned = 0.0148163 Jy
! Total flux subtracted in 100 components = 0.0148163 Jy
! Clean residual min=-0.005620 max=0.006247 Jy/beam
! Clean residual mean=0.000576 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 2.7301 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 28 model components to the UV plane model.
! The established model now contains 246 components and 2.7301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.121569Jy  sigma=0.001208
! Fit after  self-cal, rms=0.120872Jy  sigma=0.001198
! Inverting map and beam 
! Estimated beam: bmin=2.606 mas, bmaj=5.255 mas, bpa=-15.94 degrees
! Estimated noise=773.839 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0066362 Jy
! Component: 100  -  total flux cleaned = 0.0121937 Jy
! Total flux subtracted in 100 components = 0.0121937 Jy
! Clean residual min=-0.005551 max=0.005961 Jy/beam
! Clean residual mean=0.000514 rms=0.001288 Jy/beam
! Combined flux in latest and established models = 2.74229 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 263 components and 2.74229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120435Jy  sigma=0.001192
! Fit after  self-cal, rms=0.120370Jy  sigma=0.001192
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save VR422201_S
! Writing UV FITS file: VR422201_S.uvf
! Writing 263 model components to file: VR422201_S.mod
! wwins: Wrote 7 windows to VR422201_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.606 x 5.255 at -15.94 degrees (North through East)
! Clean map  min=-0.0052944  max=1.7817 Jy/beam
! Writing clean map to FITS file: VR422201_S.fits
! Writing difmap environment to: VR422201_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot VR422201_S]
device VR422201_Suv.ps/vps,1,2
! Attempting to open device: 'VR422201_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device VR422201_Sim.ps/vps
! Attempting to open device: 'VR422201_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.606 mas, bmaj=5.255 mas, bpa=-15.94 degrees
! Estimated noise=773.839 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.606 x 5.255 at -15.94 degrees (North through East)
! Clean map  min=-0.0052944  max=1.7817 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo7-0.4]
quit
! Quitting program
! Log file VR422201_S.log closed on Thu May  8 13:17:07 2008