! Started logfile: OW-015_S.log on Thu May  8 13:13:59 2008
observe OW-015_S.edt
! Reading UV FITS file: OW-015_S.edt
! AN table 1: 30 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.140305 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: OW-015
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 955 lines of history.
! 
! Reading 2576 visibilities.
![@gonzo6-0.4 OW-015_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 403 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 399 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 418 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 428 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.555297Jy  sigma=0.005742
! Fit after  self-cal, rms=0.553891Jy  sigma=0.005750
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.977 mas, bmaj=8.599 mas, bpa=-7.367 degrees
! Estimated noise=2495.1 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.886506 Jy
! Total flux subtracted in 50 components = 0.886506 Jy
! Clean residual min=-0.078847 max=0.304720 Jy/beam
! Clean residual mean=0.001031 rms=0.029965 Jy/beam
! Combined flux in latest and established models = 0.886506 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.886506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.599336Jy  sigma=0.006293
! Fit after  self-cal, rms=0.599250Jy  sigma=0.006292
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.327821 Jy
! Total flux subtracted in 50 components = 0.327821 Jy
! Clean residual min=-0.054651 max=0.148241 Jy/beam
! Clean residual mean=0.000690 rms=0.019488 Jy/beam
! Combined flux in latest and established models = 1.21433 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 10 components and 1.21433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.402868Jy  sigma=0.004189
! Fit after  self-cal, rms=0.402603Jy  sigma=0.004187
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.174734 Jy
! Total flux subtracted in 50 components = 0.174734 Jy
! Clean residual min=-0.045507 max=0.096277 Jy/beam
! Clean residual mean=0.000509 rms=0.015240 Jy/beam
! Combined flux in latest and established models = 1.38906 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 1.38906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.320752Jy  sigma=0.003309
! Fit after  self-cal, rms=0.320575Jy  sigma=0.003308
! Inverting map 
! Added new window around map position (2.8, -2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.117682 Jy
! Total flux subtracted in 50 components = 0.117682 Jy
! Clean residual min=-0.041388 max=0.064462 Jy/beam
! Clean residual mean=0.000388 rms=0.012849 Jy/beam
! Combined flux in latest and established models = 1.50674 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 1.50674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.275674Jy  sigma=0.002823
! Fit after  self-cal, rms=0.275436Jy  sigma=0.002821
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.177 mas, bmaj=9.645 mas, bpa=-6.391 degrees
! Estimated noise=1615.47 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.116729 Jy
! Component: 100  -  total flux cleaned = 0.185684 Jy
! Total flux subtracted in 100 components = 0.185684 Jy
! Clean residual min=-0.039670 max=0.081975 Jy/beam
! Clean residual mean=0.000444 rms=0.012719 Jy/beam
! Combined flux in latest and established models = 1.69243 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 56 model components to the UV plane model.
! The established model now contains 85 components and 1.69243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.230579Jy  sigma=0.002304
! Fit after  self-cal, rms=0.229959Jy  sigma=0.002300
! Inverting map 
! Added new window around map position (13.6, -21.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.077168 Jy
! Component: 100  -  total flux cleaned = 0.12603 Jy
! Total flux subtracted in 100 components = 0.12603 Jy
! Clean residual min=-0.036377 max=0.043266 Jy/beam
! Clean residual mean=0.000263 rms=0.009590 Jy/beam
! Combined flux in latest and established models = 1.81846 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 33 model components to the UV plane model.
! The established model now contains 115 components and 1.81846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.207115Jy  sigma=0.002007
! Fit after  self-cal, rms=0.205941Jy  sigma=0.001996
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     GC        0.99     HH        1.00*    
!   HN        0.98     KK        1.02     KP        0.90     LA        0.95     
!   MC        1.01     MK        1.02     NL        0.91     NY        1.00*    
!   ON        1.10     OV        0.94     PT        1.02     SC        0.92     
!   WF        1.26     WZ        1.00     
! 
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        0.99     HH        1.00*    
!   HN        1.01     KK        1.01     KP        0.98     LA        0.95     
!   MC        0.89     MK        0.97     NL        0.94     NY        1.00*    
!   ON        1.04     OV        0.94     PT        0.91     SC        1.00     
!   WF        1.32     WZ        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     GC        0.99     HH        1.00*    
!   HN        1.14     KK        1.04     KP        0.95     LA        0.95     
!   MC        2.34     MK        0.94     NL        0.96     NY        1.00*    
!   ON        1.12     OV        0.97     PT        0.97     SC        1.09     
!   WF        1.33     WZ        0.90     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.94     GC        0.95     HH        1.00*    
!   HN        1.10     KK        1.03     KP        0.99     LA        1.00*    
!   MC        1.74     MK        0.95     NL        0.97     NY        1.00*    
!   ON        1.23     OV        0.87     PT        0.97     SC        1.14     
!   WF        1.42     WZ        0.88     
! 
! 
! Fit before self-cal, rms=0.205941Jy  sigma=0.001996
! Fit after  self-cal, rms=0.153712Jy  sigma=0.001384
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=9.711 mas, bpa=-6.372 degrees
! Estimated noise=1610.32 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21.6, -23.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0415187 Jy
! Component: 100  -  total flux cleaned = 0.0641231 Jy
! Total flux subtracted in 100 components = 0.0641231 Jy
! Clean residual min=-0.015960 max=0.015745 Jy/beam
! Clean residual mean=0.000051 rms=0.003676 Jy/beam
! Combined flux in latest and established models = 1.88258 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 132 components and 1.88258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144174Jy  sigma=0.001252
! Fit after  self-cal, rms=0.143727Jy  sigma=0.001248
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (17.6, -22.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111732 Jy
! Component: 100  -  total flux cleaned = 0.0177426 Jy
! Total flux subtracted in 100 components = 0.0177426 Jy
! Clean residual min=-0.014263 max=0.013064 Jy/beam
! Clean residual mean=0.000053 rms=0.003222 Jy/beam
! Combined flux in latest and established models = 1.90032 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 158 components and 1.90032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141486Jy  sigma=0.001220
! Fit after  self-cal, rms=0.138808Jy  sigma=0.001188
! Inverting map and beam 
! Estimated beam: bmin=2.212 mas, bmaj=9.728 mas, bpa=-6.372 degrees
! Estimated noise=1604.02 mJy/beam.
! Added new window around map position (26.8, -26).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00849691 Jy
! Component: 100  -  total flux cleaned = 0.0131244 Jy
! Total flux subtracted in 100 components = 0.0131244 Jy
! Clean residual min=-0.011508 max=0.009948 Jy/beam
! Clean residual mean=0.000016 rms=0.002671 Jy/beam
! Combined flux in latest and established models = 1.91345 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 164 components and 1.91345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137224Jy  sigma=0.001169
! Fit after  self-cal, rms=0.136923Jy  sigma=0.001165
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=9.731 mas, bpa=-6.37 degrees
! Estimated noise=1602.17 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205311 Jy
! Component: 100  -  total flux cleaned = 0.00473538 Jy
! Total flux subtracted in 100 components = 0.00473538 Jy
! Clean residual min=-0.010621 max=0.009405 Jy/beam
! Clean residual mean=0.000015 rms=0.002455 Jy/beam
! Combined flux in latest and established models = 1.91818 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 170 components and 1.91818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136016Jy  sigma=0.001155
! Fit after  self-cal, rms=0.135951Jy  sigma=0.001154
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save OW-015_S
! Writing UV FITS file: OW-015_S.uvf
! Writing 170 model components to file: OW-015_S.mod
! wwins: Wrote 6 windows to OW-015_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.214 x 9.731 at -6.37 degrees (North through East)
! Clean map  min=-0.01039  max=1.1684 Jy/beam
! Writing clean map to FITS file: OW-015_S.fits
! Writing difmap environment to: OW-015_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot OW-015_S]
device OW-015_Suv.ps/vps,1,2
! Attempting to open device: 'OW-015_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device OW-015_Sim.ps/vps
! Attempting to open device: 'OW-015_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.214 mas, bmaj=9.731 mas, bpa=-6.37 degrees
! Estimated noise=1602.17 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.214 x 9.731 at -6.37 degrees (North through East)
! Clean map  min=-0.01039  max=1.1684 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.4]
quit
! Quitting program
! Log file OW-015_S.log closed on Thu May  8 13:14:06 2008