! Started logfile: NRAO512_S.log on Thu May  8 13:01:05 2008
observe NRAO512_S.edt
! Reading UV FITS file: NRAO512_S.edt
! AN table 1: 108 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.221617 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: NRAO512
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 955 lines of history.
! 
! Reading 14648 visibilities.
![@gonzo7-0.4 NRAO512_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 7.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1376 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1348 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1397 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1425 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.158959Jy  sigma=0.001746
! Fit after  self-cal, rms=0.156307Jy  sigma=0.001729
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=3.093 mas, bpa=-7.396 degrees
! Estimated noise=1224.31 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.763102 Jy
! Total flux subtracted in 50 components = 0.763102 Jy
! Clean residual min=-0.026572 max=0.212856 Jy/beam
! Clean residual mean=0.000050 rms=0.007999 Jy/beam
! Combined flux in latest and established models = 0.763102 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 0.763102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.276790Jy  sigma=0.003385
! Fit after  self-cal, rms=0.276791Jy  sigma=0.003385
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.167441 Jy
! Total flux subtracted in 50 components = 0.167441 Jy
! Clean residual min=-0.015036 max=0.052416 Jy/beam
! Clean residual mean=-0.000002 rms=0.004091 Jy/beam
! Combined flux in latest and established models = 0.930543 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.930543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167521Jy  sigma=0.001958
! Fit after  self-cal, rms=0.167513Jy  sigma=0.001958
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0565921 Jy
! Total flux subtracted in 50 components = 0.0565921 Jy
! Clean residual min=-0.013389 max=0.027926 Jy/beam
! Clean residual mean=-0.000020 rms=0.003410 Jy/beam
! Combined flux in latest and established models = 0.987135 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 16 components and 0.987135 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150663Jy  sigma=0.001698
! Fit after  self-cal, rms=0.150605Jy  sigma=0.001697
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0336517 Jy
! Total flux subtracted in 50 components = 0.0336517 Jy
! Clean residual min=-0.013125 max=0.017298 Jy/beam
! Clean residual mean=-0.000030 rms=0.003143 Jy/beam
! Combined flux in latest and established models = 1.02079 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 19 components and 1.02079 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144208Jy  sigma=0.001594
! Fit after  self-cal, rms=0.144153Jy  sigma=0.001594
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.431 mas, bmaj=3.356 mas, bpa=-9.238 degrees
! Estimated noise=703.743 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0292419 Jy
! Component: 100  -  total flux cleaned = 0.0452666 Jy
! Total flux subtracted in 100 components = 0.0452666 Jy
! Clean residual min=-0.012816 max=0.017320 Jy/beam
! Clean residual mean=-0.000235 rms=0.002915 Jy/beam
! Combined flux in latest and established models = 1.06605 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 29 components and 1.06605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139577Jy  sigma=0.001517
! Fit after  self-cal, rms=0.139562Jy  sigma=0.001516
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.07     GC        0.99     HH        1.00*    
!   HN        0.98     KK        1.01     KP        0.97     LA        0.99     
!   MC        1.01     MK        1.04     NL        0.94     NY        0.99     
!   ON        1.06     OV        0.95     PT        1.04     SC        0.94     
!   WF        1.12     WZ        0.94     
! 
! 
! Correcting IF 2.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     GC        0.97     HH        1.00*    
!   HN        0.98     KK        1.00     KP        1.03     LA        0.99     
!   MC        1.14     MK        1.05     NL        0.96     NY        0.97     
!   ON        1.04     OV        0.95     PT        0.96     SC        1.02     
!   WF        1.10     WZ        0.91     
! 
! 
! Correcting IF 3.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     GC        0.98     HH        1.00*    
!   HN        1.10     KK        1.02     KP        1.00     LA        0.97     
!   MC        1.24     MK        0.99     NL        0.98     NY        1.03     
!   ON        1.07     OV        0.97     PT        1.01     SC        1.10     
!   WF        1.15     WZ        0.91     
! 
! 
! Correcting IF 4.
!  A total of 66 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     GC        1.03     HH        1.00*    
!   HN        1.08     KK        1.03     KP        1.04     LA        1.00*    
!   MC        1.36     MK        0.97     NL        0.98     NY        1.04     
!   ON        1.14     OV        0.86     PT        1.00     SC        1.12     
!   WF        1.15     WZ        0.89     
! 
! 
! Fit before self-cal, rms=0.139562Jy  sigma=0.001516
! Fit after  self-cal, rms=0.120863Jy  sigma=0.001192
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.404 mas, bmaj=3.347 mas, bpa=-9.549 degrees
! Estimated noise=715.584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00112438 Jy
! Component: 100  -  total flux cleaned = -0.00102716 Jy
! Total flux subtracted in 100 components = -0.00102716 Jy
! Clean residual min=-0.005660 max=0.006830 Jy/beam
! Clean residual mean=0.000039 rms=0.001352 Jy/beam
! Combined flux in latest and established models = 1.06503 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 1.06503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120738Jy  sigma=0.001190
! Fit after  self-cal, rms=0.120740Jy  sigma=0.001190
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.8, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00602009 Jy
! Component: 100  -  total flux cleaned = 0.00701124 Jy
! Total flux subtracted in 100 components = 0.00701124 Jy
! Clean residual min=-0.005840 max=0.005317 Jy/beam
! Clean residual mean=0.000033 rms=0.001313 Jy/beam
! Combined flux in latest and established models = 1.07204 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 1.07204 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.120444Jy  sigma=0.001186
! Fit after  self-cal, rms=0.110423Jy  sigma=0.001073
! Inverting map and beam 
! Estimated beam: bmin=2.405 mas, bmaj=3.348 mas, bpa=-9.605 degrees
! Estimated noise=717.5 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00309238 Jy
! Component: 100  -  total flux cleaned = 0.00460672 Jy
! Total flux subtracted in 100 components = 0.00460672 Jy
! Clean residual min=-0.004031 max=0.003463 Jy/beam
! Clean residual mean=0.000028 rms=0.000813 Jy/beam
! Combined flux in latest and established models = 1.07664 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 1.07664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.110335Jy  sigma=0.001072
! Fit after  self-cal, rms=0.110333Jy  sigma=0.001072
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save NRAO512_S
! Writing UV FITS file: NRAO512_S.uvf
! Writing 61 model components to file: NRAO512_S.mod
! wwins: Wrote 2 windows to NRAO512_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.405 x 3.348 at -9.605 degrees (North through East)
! Clean map  min=-0.0038478  max=0.9919 Jy/beam
! Writing clean map to FITS file: NRAO512_S.fits
! Writing difmap environment to: NRAO512_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot NRAO512_S]
device NRAO512_Suv.ps/vps,1,2
! Attempting to open device: 'NRAO512_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device NRAO512_Sim.ps/vps
! Attempting to open device: 'NRAO512_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.405 mas, bmaj=3.348 mas, bpa=-9.605 degrees
! Estimated noise=717.5 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.405 x 3.348 at -9.605 degrees (North through East)
! Clean map  min=-0.0038478  max=0.9919 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo7-0.4]
quit
! Quitting program
! Log file NRAO512_S.log closed on Thu May  8 13:01:11 2008