! Started logfile: 3C274_S.log on Thu May  8 12:48:07 2008
observe 3C274_S.edt
! Reading UV FITS file: 3C274_S.edt
! AN table 1: 72 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.16004 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 3C274
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 963 lines of history.
! 
! Reading 7052 visibilities.
![@gonzo5-0.4 3C274_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 5.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1002 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 997 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 991 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1026 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.435109Jy  sigma=0.004269
! Fit after  self-cal, rms=0.422105Jy  sigma=0.004132
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.432 mas, bmaj=4.504 mas, bpa=-10.82 degrees
! Estimated noise=2121.78 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.675259 Jy
! Total flux subtracted in 50 components = 0.675259 Jy
! Clean residual min=-0.063274 max=0.243086 Jy/beam
! Clean residual mean=0.001089 rms=0.018643 Jy/beam
! Combined flux in latest and established models = 0.675259 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.675259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.541955Jy  sigma=0.005471
! Fit after  self-cal, rms=0.541959Jy  sigma=0.005470
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.2593 Jy
! Total flux subtracted in 50 components = 0.2593 Jy
! Clean residual min=-0.040374 max=0.116515 Jy/beam
! Clean residual mean=0.000852 rms=0.012329 Jy/beam
! Combined flux in latest and established models = 0.934559 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 10 components and 0.934559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.385720Jy  sigma=0.003828
! Fit after  self-cal, rms=0.385672Jy  sigma=0.003826
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.131745 Jy
! Total flux subtracted in 50 components = 0.131745 Jy
! Clean residual min=-0.033130 max=0.109856 Jy/beam
! Clean residual mean=0.000732 rms=0.010004 Jy/beam
! Combined flux in latest and established models = 1.0663 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 12 components and 1.0663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.323459Jy  sigma=0.003170
! Fit after  self-cal, rms=0.323413Jy  sigma=0.003168
! Inverting map 
! Added new window around map position (-4.4, 0.8).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.102498 Jy
! Total flux subtracted in 50 components = 0.102498 Jy
! Clean residual min=-0.027817 max=0.059006 Jy/beam
! Clean residual mean=0.000635 rms=0.008218 Jy/beam
! Combined flux in latest and established models = 1.1688 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 1.1688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.277922Jy  sigma=0.002695
! Fit after  self-cal, rms=0.276733Jy  sigma=0.002684
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.066658 Jy
! Total flux subtracted in 50 components = 0.066658 Jy
! Clean residual min=-0.024885 max=0.048238 Jy/beam
! Clean residual mean=0.000573 rms=0.007203 Jy/beam
! Combined flux in latest and established models = 1.23546 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 1.23546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.252925Jy  sigma=0.002438
! Fit after  self-cal, rms=0.252607Jy  sigma=0.002434
! Inverting map 
! Added new window around map position (3.6, -0.8).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0513125 Jy
! Total flux subtracted in 50 components = 0.0513125 Jy
! Clean residual min=-0.023480 max=0.047426 Jy/beam
! Clean residual mean=0.000525 rms=0.006561 Jy/beam
! Combined flux in latest and established models = 1.28677 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 31 components and 1.28677 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.236979Jy  sigma=0.002279
! Fit after  self-cal, rms=0.236975Jy  sigma=0.002277
! Inverting map 
! Added new window around map position (-12, 3.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0503281 Jy
! Total flux subtracted in 50 components = 0.0503281 Jy
! Clean residual min=-0.021009 max=0.039265 Jy/beam
! Clean residual mean=0.000480 rms=0.005960 Jy/beam
! Combined flux in latest and established models = 1.3371 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 38 components and 1.3371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.221283Jy  sigma=0.002122
! Fit after  self-cal, rms=0.220876Jy  sigma=0.002118
! Inverting map 
! Added new window around map position (-8, 2.8).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0426508 Jy
! Total flux subtracted in 50 components = 0.0426508 Jy
! Clean residual min=-0.019287 max=0.027536 Jy/beam
! Clean residual mean=0.000442 rms=0.005449 Jy/beam
! Combined flux in latest and established models = 1.37975 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 46 components and 1.37975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.208902Jy  sigma=0.002000
! Fit after  self-cal, rms=0.208673Jy  sigma=0.001997
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.543 mas, bmaj=5.123 mas, bpa=-5.648 degrees
! Estimated noise=1203.86 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0687287 Jy
! Component: 100  -  total flux cleaned = 0.117628 Jy
! Total flux subtracted in 100 components = 0.117628 Jy
! Clean residual min=-0.023571 max=0.048208 Jy/beam
! Clean residual mean=0.004544 rms=0.008880 Jy/beam
! Combined flux in latest and established models = 1.49738 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 46 model components to the UV plane model.
! The established model now contains 76 components and 1.49738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.183212Jy  sigma=0.001749
! Fit after  self-cal, rms=0.182289Jy  sigma=0.001738
! Inverting map 
! Added new window around map position (-18, 6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0529076 Jy
! Component: 100  -  total flux cleaned = 0.0905801 Jy
! Total flux subtracted in 100 components = 0.0905801 Jy
! Clean residual min=-0.018537 max=0.030573 Jy/beam
! Clean residual mean=0.003706 rms=0.007106 Jy/beam
! Combined flux in latest and established models = 1.58796 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 49 model components to the UV plane model.
! The established model now contains 118 components and 1.58796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165267Jy  sigma=0.001567
! Fit after  self-cal, rms=0.164080Jy  sigma=0.001553
! Inverting map 
! Added new window around map position (-10.4, 12).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.036991 Jy
! Component: 100  -  total flux cleaned = 0.0657519 Jy
! Total flux subtracted in 100 components = 0.0657519 Jy
! Clean residual min=-0.017498 max=0.025501 Jy/beam
! Clean residual mean=0.003075 rms=0.006043 Jy/beam
! Combined flux in latest and established models = 1.65371 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 52 model components to the UV plane model.
! The established model now contains 156 components and 1.65371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154416Jy  sigma=0.001457
! Fit after  self-cal, rms=0.153935Jy  sigma=0.001451
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     GC        1.00     HH        1.00*    
!   HN        0.97     KK        0.99     KP        0.98     LA        0.99     
!   MC        1.00*    MK        0.99     NL        0.97     NY        1.00     
!   ON        0.98     OV        0.98     PT        0.98     SC        1.02     
!   WF        0.97     WZ        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     GC        1.00     HH        1.00*    
!   HN        0.97     KK        0.99     KP        0.98     LA        0.99     
!   MC        1.06     MK        0.99     NL        0.97     NY        1.01     
!   ON        1.00     OV        0.98     PT        0.98     SC        1.01     
!   WF        0.96     WZ        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.01     HH        1.00*    
!   HN        0.98     KK        0.98     KP        0.98     LA        0.98     
!   MC        1.07     MK        0.99     NL        0.97     NY        1.00     
!   ON        0.97     OV        0.98     PT        0.98     SC        1.02     
!   WF        0.98     WZ        1.00     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     GC        1.01     HH        1.00*    
!   HN        0.98     KK        0.98     KP        0.98     LA        1.00*    
!   MC        1.00     MK        0.99     NL        0.97     NY        1.01     
!   ON        0.99     OV        0.98     PT        0.99     SC        1.02     
!   WF        0.97     WZ        0.98     
! 
! 
! Fit before self-cal, rms=0.153935Jy  sigma=0.001451
! Fit after  self-cal, rms=0.146415Jy  sigma=0.001415
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.551 mas, bmaj=5.16 mas, bpa=-5.936 degrees
! Estimated noise=1179.08 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-25.6, 9.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0299257 Jy
! Component: 100  -  total flux cleaned = 0.050398 Jy
! Total flux subtracted in 100 components = 0.050398 Jy
! Clean residual min=-0.015297 max=0.017318 Jy/beam
! Clean residual mean=0.001634 rms=0.004728 Jy/beam
! Combined flux in latest and established models = 1.70411 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 191 components and 1.70411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139935Jy  sigma=0.001349
! Fit after  self-cal, rms=0.139513Jy  sigma=0.001345
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-54, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.019848 Jy
! Component: 100  -  total flux cleaned = 0.036276 Jy
! Total flux subtracted in 100 components = 0.036276 Jy
! Clean residual min=-0.014147 max=0.015840 Jy/beam
! Clean residual mean=0.001296 rms=0.004253 Jy/beam
! Combined flux in latest and established models = 1.74038 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 53 model components to the UV plane model.
! The established model now contains 229 components and 1.74038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136172Jy  sigma=0.001311
! Fit after  self-cal, rms=0.134647Jy  sigma=0.001292
! Inverting map and beam 
! Estimated beam: bmin=3.555 mas, bmaj=5.166 mas, bpa=-5.922 degrees
! Estimated noise=1177.66 mJy/beam.
! Added new window around map position (-63.6, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183006 Jy
! Component: 100  -  total flux cleaned = 0.0331924 Jy
! Total flux subtracted in 100 components = 0.0331924 Jy
! Clean residual min=-0.012865 max=0.013128 Jy/beam
! Clean residual mean=0.001210 rms=0.003669 Jy/beam
! Combined flux in latest and established models = 1.77358 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 260 components and 1.77358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131728Jy  sigma=0.001262
! Fit after  self-cal, rms=0.131428Jy  sigma=0.001257
! Inverting map and beam 
! Estimated beam: bmin=3.557 mas, bmaj=5.165 mas, bpa=-5.888 degrees
! Estimated noise=1177.77 mJy/beam.
! Added new window around map position (-75.2, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152221 Jy
! Component: 100  -  total flux cleaned = 0.0281948 Jy
! Total flux subtracted in 100 components = 0.0281948 Jy
! Clean residual min=-0.012335 max=0.012307 Jy/beam
! Clean residual mean=0.001087 rms=0.003350 Jy/beam
! Combined flux in latest and established models = 1.80177 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 51 model components to the UV plane model.
! The established model now contains 291 components and 1.80177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.129298Jy  sigma=0.001235
! Fit after  self-cal, rms=0.129191Jy  sigma=0.001233
! Inverting map and beam 
! Estimated beam: bmin=3.558 mas, bmaj=5.165 mas, bpa=-5.861 degrees
! Estimated noise=1177.72 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126781 Jy
! Component: 100  -  total flux cleaned = 0.0239078 Jy
! Total flux subtracted in 100 components = 0.0239078 Jy
! Clean residual min=-0.011581 max=0.011647 Jy/beam
! Clean residual mean=0.000969 rms=0.003107 Jy/beam
! Combined flux in latest and established models = 1.82568 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 53 model components to the UV plane model.
! The established model now contains 313 components and 1.82568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.127639Jy  sigma=0.001217
! Fit after  self-cal, rms=0.127520Jy  sigma=0.001216
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 3C274_S
! Writing UV FITS file: 3C274_S.uvf
! Writing 313 model components to file: 3C274_S.mod
! wwins: Wrote 11 windows to 3C274_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.558 x 5.165 at -5.861 degrees (North through East)
! Clean map  min=-0.011664  max=0.96352 Jy/beam
! Writing clean map to FITS file: 3C274_S.fits
! Writing difmap environment to: 3C274_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 3C274_S]
device 3C274_Suv.ps/vps,1,2
! Attempting to open device: '3C274_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 3C274_Sim.ps/vps
! Attempting to open device: '3C274_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=3.558 mas, bmaj=5.165 mas, bpa=-5.861 degrees
! Estimated noise=1177.72 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.558 x 5.165 at -5.861 degrees (North through East)
! Clean map  min=-0.011664  max=0.96352 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo5-0.4]
quit
! Quitting program
! Log file 3C274_S.log closed on Thu May  8 12:48:17 2008