! Started logfile: 2145+067_S.log on Wed May  7 16:10:20 2008
observe 2145+067_S.edt
! Reading UV FITS file: 2145+067_S.edt
! AN table 1: 48 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.257489 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 2145+067
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 963 lines of history.
! 
! Reading 7564 visibilities.
![@gonzo6-0.4 2145+067_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 581 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 596 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 565 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 627 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.227486Jy  sigma=0.013945
! Fit after  self-cal, rms=1.219669Jy  sigma=0.013856
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.974 mas, bmaj=6.893 mas, bpa=-7.528 degrees
! Estimated noise=1911.61 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.57148 Jy
! Total flux subtracted in 50 components = 1.57148 Jy
! Clean residual min=-0.084623 max=0.438306 Jy/beam
! Clean residual mean=0.001073 rms=0.029507 Jy/beam
! Combined flux in latest and established models = 1.57148 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.57148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.726316Jy  sigma=0.008422
! Fit after  self-cal, rms=0.726314Jy  sigma=0.008422
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.394881 Jy
! Total flux subtracted in 50 components = 0.394881 Jy
! Clean residual min=-0.049745 max=0.201763 Jy/beam
! Clean residual mean=0.000808 rms=0.018116 Jy/beam
! Combined flux in latest and established models = 1.96636 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.96636 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.473603Jy  sigma=0.005363
! Fit after  self-cal, rms=0.471228Jy  sigma=0.005353
! Inverting map 
! Added new window around map position (3.6, -3.2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.220832 Jy
! Total flux subtracted in 50 components = 0.220832 Jy
! Clean residual min=-0.035757 max=0.112268 Jy/beam
! Clean residual mean=0.000652 rms=0.012829 Jy/beam
! Combined flux in latest and established models = 2.18719 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 14 model components to the UV plane model.
! The established model now contains 19 components and 2.18719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.358573Jy  sigma=0.003941
! Fit after  self-cal, rms=0.349828Jy  sigma=0.003879
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147875 Jy
! Total flux subtracted in 50 components = 0.147875 Jy
! Clean residual min=-0.026774 max=0.077665 Jy/beam
! Clean residual mean=0.000548 rms=0.009246 Jy/beam
! Combined flux in latest and established models = 2.33507 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 2.33507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.281458Jy  sigma=0.003001
! Fit after  self-cal, rms=0.276686Jy  sigma=0.002965
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.100834 Jy
! Total flux subtracted in 50 components = 0.100834 Jy
! Clean residual min=-0.021230 max=0.056524 Jy/beam
! Clean residual mean=0.000477 rms=0.007022 Jy/beam
! Combined flux in latest and established models = 2.4359 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 2.4359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.235944Jy  sigma=0.002424
! Fit after  self-cal, rms=0.233677Jy  sigma=0.002406
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0695776 Jy
! Total flux subtracted in 50 components = 0.0695776 Jy
! Clean residual min=-0.018125 max=0.043594 Jy/beam
! Clean residual mean=0.000428 rms=0.005704 Jy/beam
! Combined flux in latest and established models = 2.50548 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 2.50548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.210079Jy  sigma=0.002082
! Fit after  self-cal, rms=0.208785Jy  sigma=0.002072
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0489588 Jy
! Total flux subtracted in 50 components = 0.0489588 Jy
! Clean residual min=-0.016121 max=0.034787 Jy/beam
! Clean residual mean=0.000392 rms=0.004939 Jy/beam
! Combined flux in latest and established models = 2.55444 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 54 components and 2.55444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.195253Jy  sigma=0.001882
! Fit after  self-cal, rms=0.194434Jy  sigma=0.001875
! Inverting map 
! Added new window around map position (5.6, -7.2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.036767 Jy
! Total flux subtracted in 50 components = 0.036767 Jy
! Clean residual min=-0.014428 max=0.028683 Jy/beam
! Clean residual mean=0.000364 rms=0.004471 Jy/beam
! Combined flux in latest and established models = 2.59121 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 2.59121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.185984Jy  sigma=0.001758
! Fit after  self-cal, rms=0.185516Jy  sigma=0.001755
! Inverting map 
! Added new window around map position (25.2, -69.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0319683 Jy
! Total flux subtracted in 50 components = 0.0319683 Jy
! Clean residual min=-0.013331 max=0.024374 Jy/beam
! Clean residual mean=0.000345 rms=0.004098 Jy/beam
! Combined flux in latest and established models = 2.62317 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 81 components and 2.62317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179318Jy  sigma=0.001669
! Fit after  self-cal, rms=0.179057Jy  sigma=0.001667
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.242 mas, bmaj=9.798 mas, bpa=-11.07 degrees
! Estimated noise=1034.21 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0496212 Jy
! Component: 100  -  total flux cleaned = 0.0837078 Jy
! Total flux subtracted in 100 components = 0.0837078 Jy
! Clean residual min=-0.013174 max=0.035157 Jy/beam
! Clean residual mean=0.003192 rms=0.006178 Jy/beam
! Combined flux in latest and established models = 2.70688 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 113 components and 2.70688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165670Jy  sigma=0.001490
! Fit after  self-cal, rms=0.165185Jy  sigma=0.001485
! Inverting map 
! Added new window around map position (29.2, -55.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0354233 Jy
! Component: 100  -  total flux cleaned = 0.0598744 Jy
! Total flux subtracted in 100 components = 0.0598744 Jy
! Clean residual min=-0.010988 max=0.026661 Jy/beam
! Clean residual mean=0.002671 rms=0.004850 Jy/beam
! Combined flux in latest and established models = 2.76676 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 50 model components to the UV plane model.
! The established model now contains 158 components and 2.76676 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.157483Jy  sigma=0.001390
! Fit after  self-cal, rms=0.157209Jy  sigma=0.001385
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00*    HH        1.00*    
!   HN        0.99     KK        1.00*    KP        1.00     LA        1.00     
!   MC        0.98     MK        1.00     NL        0.99     NY        1.01     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.02     
!   WF        0.99     WZ        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.02     HH        1.00*    
!   HN        0.99     KK        1.02     KP        1.00     LA        0.99     
!   MC        0.98     MK        1.00     NL        0.99     NY        1.01     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.00     
!   WF        0.99     WZ        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.01     HH        1.00*    
!   HN        0.99     KK        1.00     KP        1.00     LA        0.99     
!   MC        0.98     MK        1.00     NL        1.00     NY        1.00     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.01     
!   WF        0.99     WZ        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.01     KP        0.99     LA        1.00*    
!   MC        1.00*    MK        1.01     NL        0.99     NY        1.00     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.01     
!   WF        0.99     WZ        0.99     
! 
! 
! Fit before self-cal, rms=0.157209Jy  sigma=0.001385
! Fit after  self-cal, rms=0.154244Jy  sigma=0.001367
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=9.833 mas, bpa=-11.05 degrees
! Estimated noise=1026.44 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.8, -68).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0272377 Jy
! Component: 100  -  total flux cleaned = 0.0452286 Jy
! Total flux subtracted in 100 components = 0.0452286 Jy
! Clean residual min=-0.009680 max=0.017390 Jy/beam
! Clean residual mean=0.001945 rms=0.003709 Jy/beam
! Combined flux in latest and established models = 2.81198 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 194 components and 2.81198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149554Jy  sigma=0.001306
! Fit after  self-cal, rms=0.149490Jy  sigma=0.001305
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.4, -38).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193192 Jy
! Component: 100  -  total flux cleaned = 0.0338793 Jy
! Total flux subtracted in 100 components = 0.0338793 Jy
! Clean residual min=-0.008722 max=0.012315 Jy/beam
! Clean residual mean=0.001649 rms=0.003061 Jy/beam
! Combined flux in latest and established models = 2.84586 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 225 components and 2.84586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.146736Jy  sigma=0.001273
! Fit after  self-cal, rms=0.146299Jy  sigma=0.001267
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=9.837 mas, bpa=-11.04 degrees
! Estimated noise=1025.1 mJy/beam.
! Added new window around map position (16.8, -48.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0141377 Jy
! Component: 100  -  total flux cleaned = 0.0257315 Jy
! Total flux subtracted in 100 components = 0.0257315 Jy
! Clean residual min=-0.007707 max=0.010823 Jy/beam
! Clean residual mean=0.001354 rms=0.002662 Jy/beam
! Combined flux in latest and established models = 2.8716 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 32 model components to the UV plane model.
! The established model now contains 248 components and 2.8716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144779Jy  sigma=0.001248
! Fit after  self-cal, rms=0.144660Jy  sigma=0.001247
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=9.838 mas, bpa=-11.03 degrees
! Estimated noise=1025.09 mJy/beam.
! Added new window around map position (23.2, -38.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011511 Jy
! Component: 100  -  total flux cleaned = 0.0208858 Jy
! Total flux subtracted in 100 components = 0.0208858 Jy
! Clean residual min=-0.007490 max=0.010081 Jy/beam
! Clean residual mean=0.001181 rms=0.002365 Jy/beam
! Combined flux in latest and established models = 2.89248 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 44 model components to the UV plane model.
! The established model now contains 276 components and 2.89248 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.143663Jy  sigma=0.001233
! Fit after  self-cal, rms=0.143640Jy  sigma=0.001233
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=9.838 mas, bpa=-11.03 degrees
! Estimated noise=1025.23 mJy/beam.
! Added new window around map position (30.8, -18.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00998139 Jy
! Component: 100  -  total flux cleaned = 0.0179958 Jy
! Total flux subtracted in 100 components = 0.0179958 Jy
! Clean residual min=-0.007511 max=0.008101 Jy/beam
! Clean residual mean=0.001060 rms=0.002109 Jy/beam
! Combined flux in latest and established models = 2.91048 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 301 components and 2.91048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142838Jy  sigma=0.001223
! Fit after  self-cal, rms=0.142829Jy  sigma=0.001222
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=9.838 mas, bpa=-11.03 degrees
! Estimated noise=1025.33 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00764312 Jy
! Component: 100  -  total flux cleaned = 0.014433 Jy
! Total flux subtracted in 100 components = 0.014433 Jy
! Clean residual min=-0.007417 max=0.007609 Jy/beam
! Clean residual mean=0.000953 rms=0.001975 Jy/beam
! Combined flux in latest and established models = 2.92491 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 47 model components to the UV plane model.
! The established model now contains 326 components and 2.92491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.142320Jy  sigma=0.001216
! Fit after  self-cal, rms=0.142261Jy  sigma=0.001216
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 2145+067_S
! Writing UV FITS file: 2145+067_S.uvf
! Writing 326 model components to file: 2145+067_S.mod
! wwins: Wrote 10 windows to 2145+067_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.241 x 9.838 at -11.03 degrees (North through East)
! Clean map  min=-0.0070591  max=2.0327 Jy/beam
! Writing clean map to FITS file: 2145+067_S.fits
! Writing difmap environment to: 2145+067_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 2145+067_S]
device 2145+067_Suv.ps/vps,1,2
! Attempting to open device: '2145+067_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 2145+067_Sim.ps/vps
! Attempting to open device: '2145+067_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.241 mas, bmaj=9.838 mas, bpa=-11.03 degrees
! Estimated noise=1025.33 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.241 x 9.838 at -11.03 degrees (North through East)
! Clean map  min=-0.0070591  max=2.0327 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.4]
quit
! Quitting program
! Log file 2145+067_S.log closed on Wed May  7 16:10:30 2008