! Started logfile: 2136+141_S.log on Wed May  7 16:04:13 2008
observe 2136+141_S.edt
! Reading UV FITS file: 2136+141_S.edt
! AN table 1: 53 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.200148 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 2136+141
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 955 lines of history.
! 
! Reading 6492 visibilities.
![@gonzo7-0.4 2136+141_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 7.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 688 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 691 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 696 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 716 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.281382Jy  sigma=0.003310
! Fit after  self-cal, rms=0.277742Jy  sigma=0.003288
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.96 mas, bmaj=4.519 mas, bpa=-10.6 degrees
! Estimated noise=2107.7 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.680838 Jy
! Total flux subtracted in 50 components = 0.680838 Jy
! Clean residual min=-0.051866 max=0.213734 Jy/beam
! Clean residual mean=0.000460 rms=0.019440 Jy/beam
! Combined flux in latest and established models = 0.680838 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.680838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.427060Jy  sigma=0.005704
! Fit after  self-cal, rms=0.426895Jy  sigma=0.005702
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.229654 Jy
! Total flux subtracted in 50 components = 0.229654 Jy
! Clean residual min=-0.032881 max=0.104593 Jy/beam
! Clean residual mean=0.000242 rms=0.011742 Jy/beam
! Combined flux in latest and established models = 0.910492 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.910492 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.271846Jy  sigma=0.003579
! Fit after  self-cal, rms=0.271138Jy  sigma=0.003574
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.120976 Jy
! Total flux subtracted in 50 components = 0.120976 Jy
! Clean residual min=-0.026954 max=0.058984 Jy/beam
! Clean residual mean=0.000127 rms=0.008523 Jy/beam
! Combined flux in latest and established models = 1.03147 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 16 components and 1.03147 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.206508Jy  sigma=0.002649
! Fit after  self-cal, rms=0.205786Jy  sigma=0.002644
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0726829 Jy
! Total flux subtracted in 50 components = 0.0726829 Jy
! Clean residual min=-0.024279 max=0.041013 Jy/beam
! Clean residual mean=0.000058 rms=0.006940 Jy/beam
! Combined flux in latest and established models = 1.10415 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 25 components and 1.10415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175233Jy  sigma=0.002183
! Fit after  self-cal, rms=0.174963Jy  sigma=0.002180
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.886 mas, bmaj=5.326 mas, bpa=-4.93 degrees
! Estimated noise=910.995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0844038 Jy
! Component: 100  -  total flux cleaned = 0.130244 Jy
! Total flux subtracted in 100 components = 0.130244 Jy
! Clean residual min=-0.017414 max=0.027190 Jy/beam
! Clean residual mean=-0.000250 rms=0.005466 Jy/beam
! Combined flux in latest and established models = 1.23439 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 27 model components to the UV plane model.
! The established model now contains 47 components and 1.23439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140985Jy  sigma=0.001613
! Fit after  self-cal, rms=0.140676Jy  sigma=0.001609
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 21 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.07     GC        1.05     HH        1.00*    
!   HN        0.96     KK        1.00*    KP        0.95     LA        0.98     
!   MC        1.01     MK        1.00*    NL        0.93     NY        1.02     
!   ON        1.09     OV        0.94     PT        1.01     SC        0.93     
!   WF        1.10     WZ        0.91     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     GC        1.04     HH        1.00*    
!   HN        0.97     KK        1.00*    KP        1.01     LA        0.97     
!   MC        1.00     MK        1.00*    NL        0.96     NY        1.00     
!   ON        1.06     OV        0.92     PT        0.94     SC        1.00     
!   WF        1.05     WZ        0.90     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     GC        1.03     HH        1.00*    
!   HN        1.08     KK        1.00*    KP        0.97     LA        0.94     
!   MC        1.49     MK        1.00*    NL        0.97     NY        1.03     
!   ON        1.06     OV        0.95     PT        0.98     SC        1.07     
!   WF        1.11     WZ        0.85     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     GC        1.05     HH        1.00*    
!   HN        1.06     KK        1.00*    KP        1.00     LA        1.00*    
!   MC        1.70     MK        1.00*    NL        0.97     NY        1.02     
!   ON        1.09     OV        0.83     PT        0.96     SC        1.07     
!   WF        1.14     WZ        0.84     
! 
! 
! Fit before self-cal, rms=0.140676Jy  sigma=0.001609
! Fit after  self-cal, rms=0.112804Jy  sigma=0.001182
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.907 mas, bmaj=5.413 mas, bpa=-5.004 degrees
! Estimated noise=899.357 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.4, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108615 Jy
! Component: 100  -  total flux cleaned = 0.0138847 Jy
! Total flux subtracted in 100 components = 0.0138847 Jy
! Clean residual min=-0.004688 max=0.007746 Jy/beam
! Clean residual mean=0.000326 rms=0.001355 Jy/beam
! Combined flux in latest and established models = 1.24828 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 58 components and 1.24828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111838Jy  sigma=0.001168
! Fit after  self-cal, rms=0.111787Jy  sigma=0.001167
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.4, -8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00657595 Jy
! Component: 100  -  total flux cleaned = 0.00693454 Jy
! Total flux subtracted in 100 components = 0.00693454 Jy
! Clean residual min=-0.004123 max=0.005114 Jy/beam
! Clean residual mean=0.000290 rms=0.001204 Jy/beam
! Combined flux in latest and established models = 1.25521 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 66 components and 1.25521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111383Jy  sigma=0.001160
! Fit after  self-cal, rms=0.108418Jy  sigma=0.001142
! Inverting map and beam 
! Estimated beam: bmin=2.91 mas, bmaj=5.403 mas, bpa=-4.96 degrees
! Estimated noise=899.385 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00342819 Jy
! Component: 100  -  total flux cleaned = 0.00453643 Jy
! Total flux subtracted in 100 components = 0.00453643 Jy
! Clean residual min=-0.003744 max=0.004794 Jy/beam
! Clean residual mean=0.000265 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 1.25975 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 75 components and 1.25975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108213Jy  sigma=0.001139
! Fit after  self-cal, rms=0.108206Jy  sigma=0.001139
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 2136+141_S
! Writing UV FITS file: 2136+141_S.uvf
! Writing 75 model components to file: 2136+141_S.mod
! wwins: Wrote 3 windows to 2136+141_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.91 x 5.403 at -4.96 degrees (North through East)
! Clean map  min=-0.0035607  max=0.98739 Jy/beam
! Writing clean map to FITS file: 2136+141_S.fits
! Writing difmap environment to: 2136+141_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 2136+141_S]
device 2136+141_Suv.ps/vps,1,2
! Attempting to open device: '2136+141_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 2136+141_Sim.ps/vps
! Attempting to open device: '2136+141_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.91 mas, bmaj=5.403 mas, bpa=-4.96 degrees
! Estimated noise=899.385 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.91 x 5.403 at -4.96 degrees (North through East)
! Clean map  min=-0.0035607  max=0.98739 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo7-0.4]
quit
! Quitting program
! Log file 2136+141_S.log closed on Wed May  7 16:04:19 2008