! Started logfile: 1803+784_S.log on Wed May  7 15:31:07 2008
observe 1803+784_S.edt
! Reading UV FITS file: 1803+784_S.edt
! AN table 1: 311 integrations on 153 of 153 possible baselines.
! Apparent sampling: 0.493433 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 1803+784
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22497e+09        8e+06          1        8e+06
!  02        2  2.24497e+09        8e+06          1        8e+06
!  03        3  2.33497e+09        8e+06          1        8e+06
!  04        4  2.36497e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 964 lines of history.
! 
! Reading 93916 visibilities.
![@gonzo5-0.4 1803+784_S]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.4
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 5.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2425 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2415 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2365 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2596 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.900731Jy  sigma=0.010836
! Fit after  self-cal, rms=0.898390Jy  sigma=0.010811
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.1 mas, bmaj=2.237 mas, bpa=46.08 degrees
! Estimated noise=517.673 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.32173 Jy
! Total flux subtracted in 50 components = 1.32173 Jy
! Clean residual min=-0.028210 max=0.372501 Jy/beam
! Clean residual mean=-0.000032 rms=0.007819 Jy/beam
! Combined flux in latest and established models = 1.32173 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 1.32173 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.611696Jy  sigma=0.007414
! Fit after  self-cal, rms=0.611616Jy  sigma=0.007413
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.356768 Jy
! Total flux subtracted in 50 components = 0.356768 Jy
! Clean residual min=-0.014012 max=0.153774 Jy/beam
! Clean residual mean=-0.000014 rms=0.003943 Jy/beam
! Combined flux in latest and established models = 1.6785 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 7 components and 1.6785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.344906Jy  sigma=0.004121
! Fit after  self-cal, rms=0.344153Jy  sigma=0.004118
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.16735 Jy
! Total flux subtracted in 50 components = 0.16735 Jy
! Clean residual min=-0.008081 max=0.075668 Jy/beam
! Clean residual mean=-0.000005 rms=0.002385 Jy/beam
! Combined flux in latest and established models = 1.84585 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 9 components and 1.84585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.242931Jy  sigma=0.002808
! Fit after  self-cal, rms=0.241801Jy  sigma=0.002802
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0849977 Jy
! Total flux subtracted in 50 components = 0.0849977 Jy
! Clean residual min=-0.006281 max=0.041886 Jy/beam
! Clean residual mean=-0.000000 rms=0.001744 Jy/beam
! Combined flux in latest and established models = 1.93085 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 5 model components to the UV plane model.
! The established model now contains 9 components and 1.93085 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.202932Jy  sigma=0.002265
! Fit after  self-cal, rms=0.202501Jy  sigma=0.002263
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0445148 Jy
! Total flux subtracted in 50 components = 0.0445148 Jy
! Clean residual min=-0.006370 max=0.034004 Jy/beam
! Clean residual mean=0.000002 rms=0.001533 Jy/beam
! Combined flux in latest and established models = 1.97536 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 1.97536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.188282Jy  sigma=0.002053
! Fit after  self-cal, rms=0.188121Jy  sigma=0.002051
! Inverting map 
! Added new window around map position (-2.8, -0.4).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0363244 Jy
! Total flux subtracted in 50 components = 0.0363244 Jy
! Clean residual min=-0.005837 max=0.023173 Jy/beam
! Clean residual mean=0.000004 rms=0.001390 Jy/beam
! Combined flux in latest and established models = 2.01169 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 21 components and 2.01169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177778Jy  sigma=0.001896
! Fit after  self-cal, rms=0.177257Jy  sigma=0.001893
! Inverting map 
! Added new window around map position (-6.4, -1.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0280096 Jy
! Total flux subtracted in 50 components = 0.0280096 Jy
! Clean residual min=-0.005512 max=0.016175 Jy/beam
! Clean residual mean=0.000005 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 2.0397 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 13 model components to the UV plane model.
! The established model now contains 28 components and 2.0397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.170472Jy  sigma=0.001790
! Fit after  self-cal, rms=0.170214Jy  sigma=0.001788
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0229785 Jy
! Total flux subtracted in 50 components = 0.0229785 Jy
! Clean residual min=-0.005116 max=0.013654 Jy/beam
! Clean residual mean=0.000006 rms=0.001190 Jy/beam
! Combined flux in latest and established models = 2.06268 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 30 components and 2.06268 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.165424Jy  sigma=0.001714
! Fit after  self-cal, rms=0.165252Jy  sigma=0.001713
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192579 Jy
! Total flux subtracted in 50 components = 0.0192579 Jy
! Clean residual min=-0.004777 max=0.012410 Jy/beam
! Clean residual mean=0.000007 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 2.08193 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 34 components and 2.08193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161730Jy  sigma=0.001658
! Fit after  self-cal, rms=0.161603Jy  sigma=0.001657
! Inverting map 
! Added new window around map position (-24.8, -6.8).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0166938 Jy
! Total flux subtracted in 50 components = 0.0166938 Jy
! Clean residual min=-0.005239 max=0.010770 Jy/beam
! Clean residual mean=0.000008 rms=0.001080 Jy/beam
! Combined flux in latest and established models = 2.09863 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 2.09863 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.158859Jy  sigma=0.001614
! Fit after  self-cal, rms=0.158780Jy  sigma=0.001613
! Inverting map 
! Added new window around map position (-8.4, -1.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0148253 Jy
! Total flux subtracted in 50 components = 0.0148253 Jy
! Clean residual min=-0.005831 max=0.009825 Jy/beam
! Clean residual mean=0.000008 rms=0.001040 Jy/beam
! Combined flux in latest and established models = 2.11345 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 44 components and 2.11345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.156542Jy  sigma=0.001578
! Fit after  self-cal, rms=0.156479Jy  sigma=0.001578
! Inverting map 
! Added new window around map position (-0.8, -2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132901 Jy
! Total flux subtracted in 50 components = 0.0132901 Jy
! Clean residual min=-0.006307 max=0.009029 Jy/beam
! Clean residual mean=0.000009 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 2.12674 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 49 components and 2.12674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.154668Jy  sigma=0.001549
! Fit after  self-cal, rms=0.154614Jy  sigma=0.001549
! Inverting map 
! Added new window around map position (-26, -4.4).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119961 Jy
! Total flux subtracted in 50 components = 0.0119961 Jy
! Clean residual min=-0.006471 max=0.007991 Jy/beam
! Clean residual mean=0.000009 rms=0.000976 Jy/beam
! Combined flux in latest and established models = 2.13874 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 53 components and 2.13874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.153048Jy  sigma=0.001524
! Fit after  self-cal, rms=0.153005Jy  sigma=0.001523
! Inverting map 
! Added new window around map position (-7.2, 0.4).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108218 Jy
! Total flux subtracted in 50 components = 0.0108218 Jy
! Clean residual min=-0.006670 max=0.007125 Jy/beam
! Clean residual mean=0.000010 rms=0.000952 Jy/beam
! Combined flux in latest and established models = 2.14956 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 57 components and 2.14956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151701Jy  sigma=0.001502
! Fit after  self-cal, rms=0.151660Jy  sigma=0.001502
! Inverting map 
! Added new window around map position (-10.8, -0.4).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00869409 Jy
! Total flux subtracted in 50 components = 0.00869409 Jy
! Clean residual min=-0.006207 max=0.006676 Jy/beam
! Clean residual mean=0.000010 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 2.15825 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 64 components and 2.15825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150649Jy  sigma=0.001486
! Fit after  self-cal, rms=0.150623Jy  sigma=0.001486
! Inverting map 
! Added new window around map position (-29.2, -9.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00771071 Jy
! Total flux subtracted in 50 components = 0.00771071 Jy
! Clean residual min=-0.006090 max=0.006141 Jy/beam
! Clean residual mean=0.000010 rms=0.000913 Jy/beam
! Combined flux in latest and established models = 2.16596 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 25 model components to the UV plane model.
! The established model now contains 69 components and 2.16596 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.149734Jy  sigma=0.001472
! Fit after  self-cal, rms=0.149713Jy  sigma=0.001472
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.713 mas, bmaj=3.249 mas, bpa=48.41 degrees
! Estimated noise=244.088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0283375 Jy
! Component: 100  -  total flux cleaned = 0.0501016 Jy
! Total flux subtracted in 100 components = 0.0501016 Jy
! Clean residual min=-0.004774 max=0.015041 Jy/beam
! Clean residual mean=0.000477 rms=0.001818 Jy/beam
! Combined flux in latest and established models = 2.21606 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 61 model components to the UV plane model.
! The established model now contains 117 components and 2.21606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144564Jy  sigma=0.001387
! Fit after  self-cal, rms=0.144343Jy  sigma=0.001385
! Inverting map 
! Added new window around map position (-24.8, -10.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191105 Jy
! Component: 100  -  total flux cleaned = 0.0346943 Jy
! Total flux subtracted in 100 components = 0.0346943 Jy
! Clean residual min=-0.003817 max=0.012070 Jy/beam
! Clean residual mean=0.000416 rms=0.001507 Jy/beam
! Combined flux in latest and established models = 2.25076 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 61 model components to the UV plane model.
! The established model now contains 163 components and 2.25076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141787Jy  sigma=0.001343
! Fit after  self-cal, rms=0.141683Jy  sigma=0.001342
! Inverting map 
! Added new window around map position (-31.6, -6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014653 Jy
! Component: 100  -  total flux cleaned = 0.0269635 Jy
! Total flux subtracted in 100 components = 0.0269635 Jy
! Clean residual min=-0.003431 max=0.009131 Jy/beam
! Clean residual mean=0.000368 rms=0.001278 Jy/beam
! Combined flux in latest and established models = 2.27772 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 62 model components to the UV plane model.
! The established model now contains 206 components and 2.27772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.140098Jy  sigma=0.001317
! Fit after  self-cal, rms=0.140027Jy  sigma=0.001316
! Inverting map 
! Added new window around map position (-14, -4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114057 Jy
! Component: 100  -  total flux cleaned = 0.0213098 Jy
! Total flux subtracted in 100 components = 0.0213098 Jy
! Clean residual min=-0.002978 max=0.007782 Jy/beam
! Clean residual mean=0.000331 rms=0.001115 Jy/beam
! Combined flux in latest and established models = 2.29903 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 64 model components to the UV plane model.
! The established model now contains 235 components and 2.29903 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139012Jy  sigma=0.001301
! Fit after  self-cal, rms=0.138973Jy  sigma=0.001300
! Inverting map 
! Added new window around map position (-26.4, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00947374 Jy
! Component: 100  -  total flux cleaned = 0.0176917 Jy
! Total flux subtracted in 100 components = 0.0176917 Jy
! Clean residual min=-0.002718 max=0.006387 Jy/beam
! Clean residual mean=0.000299 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 2.31672 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 58 model components to the UV plane model.
! The established model now contains 268 components and 2.31672 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138253Jy  sigma=0.001290
! Fit after  self-cal, rms=0.138224Jy  sigma=0.001289
! Inverting map 
! Added new window around map position (-36.8, -12).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00810185 Jy
! Component: 100  -  total flux cleaned = 0.0152015 Jy
! Total flux subtracted in 100 components = 0.0152015 Jy
! Clean residual min=-0.002551 max=0.005656 Jy/beam
! Clean residual mean=0.000272 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 2.33193 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 59 model components to the UV plane model.
! The established model now contains 299 components and 2.33192 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137702Jy  sigma=0.001281
! Fit after  self-cal, rms=0.137680Jy  sigma=0.001281
! Inverting map 
! Added new window around map position (-27.2, -16.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00694577 Jy
! Component: 100  -  total flux cleaned = 0.0130647 Jy
! Total flux subtracted in 100 components = 0.0130647 Jy
! Clean residual min=-0.003132 max=0.004620 Jy/beam
! Clean residual mean=0.000249 rms=0.000800 Jy/beam
! Combined flux in latest and established models = 2.34499 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 61 model components to the UV plane model.
! The established model now contains 328 components and 2.34499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137281Jy  sigma=0.001275
! Fit after  self-cal, rms=0.137268Jy  sigma=0.001275
! Inverting map 
! Added new window around map position (-33.2, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00585098 Jy
! Component: 100  -  total flux cleaned = 0.0111445 Jy
! Total flux subtracted in 100 components = 0.0111445 Jy
! Clean residual min=-0.003641 max=0.004118 Jy/beam
! Clean residual mean=0.000230 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 2.35613 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 69 model components to the UV plane model.
! The established model now contains 358 components and 2.35613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136979Jy  sigma=0.001271
! Fit after  self-cal, rms=0.136971Jy  sigma=0.001271
! Inverting map 
! Added new window around map position (-7.6, -4.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00507868 Jy
! Component: 100  -  total flux cleaned = 0.00967204 Jy
! Total flux subtracted in 100 components = 0.00967204 Jy
! Clean residual min=-0.003985 max=0.003873 Jy/beam
! Clean residual mean=0.000213 rms=0.000677 Jy/beam
! Combined flux in latest and established models = 2.36581 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 72 model components to the UV plane model.
! The established model now contains 386 components and 2.36581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136750Jy  sigma=0.001268
! Fit after  self-cal, rms=0.136742Jy  sigma=0.001267
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        1.00     MK        1.00     NL        1.00     NY        1.00     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.00     
!   WF        1.00     WZ        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        1.00     MK        1.00     NL        1.00     NY        1.00     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.00     
!   WF        1.00     WZ        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00     
!   MC        1.00     MK        1.00     NL        1.00     NY        1.00     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.00     
!   WF        1.00     WZ        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HH        1.00*    
!   HN        1.00     KK        1.00     KP        1.00     LA        1.00*    
!   MC        1.00     MK        1.00     NL        1.00     NY        1.00     
!   ON        1.00     OV        1.00     PT        1.00     SC        1.00     
!   WF        1.01     WZ        1.00     
! 
! 
! Fit before self-cal, rms=0.136742Jy  sigma=0.001267
! Fit after  self-cal, rms=0.136729Jy  sigma=0.001267
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.713 mas, bmaj=3.249 mas, bpa=48.4 degrees
! Estimated noise=243.945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425734 Jy
! Component: 100  -  total flux cleaned = 0.00812509 Jy
! Total flux subtracted in 100 components = 0.00812509 Jy
! Clean residual min=-0.004881 max=0.003601 Jy/beam
! Clean residual mean=0.000208 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 2.37393 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 74 model components to the UV plane model.
! The established model now contains 425 components and 2.37393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136572Jy  sigma=0.001265
! Fit after  self-cal, rms=0.136570Jy  sigma=0.001265
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348614 Jy
! Component: 100  -  total flux cleaned = 0.00643376 Jy
! Total flux subtracted in 100 components = 0.00643376 Jy
! Clean residual min=-0.004731 max=0.003447 Jy/beam
! Clean residual mean=0.000197 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 2.38037 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 69 model components to the UV plane model.
! The established model now contains 442 components and 2.38037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136453Jy  sigma=0.001263
! Fit after  self-cal, rms=0.136209Jy  sigma=0.001261
! Inverting map and beam 
! Estimated beam: bmin=2.711 mas, bmaj=3.25 mas, bpa=48.1 degrees
! Estimated noise=243.902 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00338017 Jy
! Component: 100  -  total flux cleaned = 0.0061484 Jy
! Total flux subtracted in 100 components = 0.0061484 Jy
! Clean residual min=-0.004399 max=0.003239 Jy/beam
! Clean residual mean=0.000186 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 2.38651 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 58 model components to the UV plane model.
! The established model now contains 476 components and 2.38651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136111Jy  sigma=0.001260
! Fit after  self-cal, rms=0.136103Jy  sigma=0.001260
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 1803+784_S
! Writing UV FITS file: 1803+784_S.uvf
! Writing 476 model components to file: 1803+784_S.mod
! wwins: Wrote 18 windows to 1803+784_S.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.711 x 3.25 at 48.1 degrees (North through East)
! Clean map  min=-0.0015679  max=1.8103 Jy/beam
! Writing clean map to FITS file: 1803+784_S.fits
! Writing difmap environment to: 1803+784_S.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 1803+784_S]
device 1803+784_Suv.ps/vps,1,2
! Attempting to open device: '1803+784_Suv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 1803+784_Sim.ps/vps
! Attempting to open device: '1803+784_Sim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=2.711 mas, bmaj=3.25 mas, bpa=48.1 degrees
! Estimated noise=243.902 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.711 x 3.25 at 48.1 degrees (North through East)
! Clean map  min=-0.0015679  max=1.8103 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo5-0.4]
quit
! Quitting program
! Log file 1803+784_S.log closed on Wed May  7 15:31:47 2008