! Started logfile: 1049+215_S.log on Tue Apr 29 23:36:34 2008 observe 1049+215_S.edt ! Reading UV FITS file: 1049+215_S.edt ! AN table 1: 87 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.199384 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1049+215 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 963 lines of history. ! ! Reading 10616 visibilities. ![@gonzo7-0.4 1049+215_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 7.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1225 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1254 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.212559Jy sigma=0.002561 ! Fit after self-cal, rms=0.210008Jy sigma=0.002529 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.111 mas, bmaj=4.352 mas, bpa=-14.73 degrees ! Estimated noise=1376.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.843162 Jy ! Total flux subtracted in 50 components = 0.843162 Jy ! Clean residual min=-0.028791 max=0.235165 Jy/beam ! Clean residual mean=0.000231 rms=0.009753 Jy/beam ! Combined flux in latest and established models = 0.843162 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.843162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.316915Jy sigma=0.003939 ! Fit after self-cal, rms=0.316915Jy sigma=0.003939 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.199755 Jy ! Total flux subtracted in 50 components = 0.199755 Jy ! Clean residual min=-0.014604 max=0.078852 Jy/beam ! Clean residual mean=0.000155 rms=0.004920 Jy/beam ! Combined flux in latest and established models = 1.04292 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 1.04292 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184601Jy sigma=0.002211 ! Fit after self-cal, rms=0.184538Jy sigma=0.002211 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0824608 Jy ! Total flux subtracted in 50 components = 0.0824608 Jy ! Clean residual min=-0.011804 max=0.049904 Jy/beam ! Clean residual mean=0.000123 rms=0.003562 Jy/beam ! Combined flux in latest and established models = 1.12538 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 1.12538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149477Jy sigma=0.001730 ! Fit after self-cal, rms=0.149498Jy sigma=0.001730 ! Inverting map ! Added new window around map position (6, -2.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515148 Jy ! Total flux subtracted in 50 components = 0.0515148 Jy ! Clean residual min=-0.010697 max=0.027007 Jy/beam ! Clean residual mean=0.000101 rms=0.002846 Jy/beam ! Combined flux in latest and established models = 1.17689 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 1.17689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134102Jy sigma=0.001494 ! Fit after self-cal, rms=0.133493Jy sigma=0.001488 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036277 Jy ! Total flux subtracted in 50 components = 0.036277 Jy ! Clean residual min=-0.009554 max=0.021256 Jy/beam ! Clean residual mean=0.000086 rms=0.002394 Jy/beam ! Combined flux in latest and established models = 1.21317 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 1.21317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125029Jy sigma=0.001353 ! Fit after self-cal, rms=0.124821Jy sigma=0.001351 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0268394 Jy ! Total flux subtracted in 50 components = 0.0268394 Jy ! Clean residual min=-0.008741 max=0.019213 Jy/beam ! Clean residual mean=0.000075 rms=0.002108 Jy/beam ! Combined flux in latest and established models = 1.24001 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 34 components and 1.24001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119888Jy sigma=0.001268 ! Fit after self-cal, rms=0.119775Jy sigma=0.001267 ! Inverting map ! Added new window around map position (9.6, -0.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0214771 Jy ! Total flux subtracted in 50 components = 0.0214771 Jy ! Clean residual min=-0.007949 max=0.012170 Jy/beam ! Clean residual mean=0.000066 rms=0.001909 Jy/beam ! Combined flux in latest and established models = 1.26149 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 1.26149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116528Jy sigma=0.001211 ! Fit after self-cal, rms=0.116453Jy sigma=0.001210 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=4.905 mas, bpa=-14.02 degrees ! Estimated noise=940.967 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0236446 Jy ! Component: 100 - total flux cleaned = 0.0402968 Jy ! Total flux subtracted in 100 components = 0.0402968 Jy ! Clean residual min=-0.005847 max=0.009563 Jy/beam ! Clean residual mean=0.000311 rms=0.001616 Jy/beam ! Combined flux in latest and established models = 1.30178 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 74 components and 1.30178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112324Jy sigma=0.001136 ! Fit after self-cal, rms=0.112192Jy sigma=0.001134 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0135325 Jy ! Component: 100 - total flux cleaned = 0.0239139 Jy ! Total flux subtracted in 100 components = 0.0239139 Jy ! Clean residual min=-0.005044 max=0.006870 Jy/beam ! Clean residual mean=0.000254 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 1.3257 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 112 components and 1.3257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110713Jy sigma=0.001107 ! Fit after self-cal, rms=0.110667Jy sigma=0.001106 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.00 HH 1.00* ! HN 1.00 KK 1.00 KP 0.99 LA 0.99 ! MC 1.00* MK 1.00 NL 1.00 NY 1.01 ! ON 1.00 OV 0.99 PT 0.99 SC 1.01 ! WF 1.00 WZ 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HH 1.00* ! HN 1.00 KK 1.00 KP 0.99 LA 0.99 ! MC 1.01 MK 1.00 NL 0.99 NY 1.01 ! ON 1.01 OV 0.99 PT 0.99 SC 1.01 ! WF 1.00 WZ 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.01 HH 1.00* ! HN 1.00 KK 1.00 KP 1.00 LA 0.99 ! MC 1.03 MK 1.00 NL 0.99 NY 1.01 ! ON 1.00 OV 0.99 PT 0.99 SC 1.01 ! WF 1.01 WZ 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 1.01 HH 1.00* ! HN 1.00 KK 1.00 KP 1.00 LA 1.00* ! MC 1.00 MK 1.00 NL 0.99 NY 1.01 ! ON 1.00 OV 0.99 PT 1.00 SC 1.01 ! WF 1.01 WZ 1.01 ! ! ! Fit before self-cal, rms=0.110667Jy sigma=0.001106 ! Fit after self-cal, rms=0.110240Jy sigma=0.001099 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.441 mas, bmaj=4.926 mas, bpa=-13.96 degrees ! Estimated noise=938.596 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0073585 Jy ! Component: 100 - total flux cleaned = 0.012552 Jy ! Total flux subtracted in 100 components = 0.012552 Jy ! Clean residual min=-0.004181 max=0.005717 Jy/beam ! Clean residual mean=0.000223 rms=0.001139 Jy/beam ! Combined flux in latest and established models = 1.33825 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 134 components and 1.33825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109840Jy sigma=0.001091 ! Fit after self-cal, rms=0.109822Jy sigma=0.001091 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561445 Jy ! Component: 100 - total flux cleaned = 0.00936782 Jy ! Total flux subtracted in 100 components = 0.00936782 Jy ! Clean residual min=-0.003854 max=0.004088 Jy/beam ! Clean residual mean=0.000201 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 1.34762 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 150 components and 1.34762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109581Jy sigma=0.001086 ! Fit after self-cal, rms=0.108646Jy sigma=0.001077 ! Inverting map and beam ! Estimated beam: bmin=2.442 mas, bmaj=4.926 mas, bpa=-13.94 degrees ! Estimated noise=939.278 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457979 Jy ! Component: 100 - total flux cleaned = 0.0078137 Jy ! Total flux subtracted in 100 components = 0.0078137 Jy ! Clean residual min=-0.003742 max=0.004229 Jy/beam ! Clean residual mean=0.000184 rms=0.001020 Jy/beam ! Combined flux in latest and established models = 1.35543 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 158 components and 1.35543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108485Jy sigma=0.001074 ! Fit after self-cal, rms=0.108476Jy sigma=0.001074 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1049+215_S ! Writing UV FITS file: 1049+215_S.uvf ! Writing 158 model components to file: 1049+215_S.mod ! wwins: Wrote 4 windows to 1049+215_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.442 x 4.926 at -13.94 degrees (North through East) ! Clean map min=-0.0036196 max=1.0949 Jy/beam ! Writing clean map to FITS file: 1049+215_S.fits ! Writing difmap environment to: 1049+215_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1049+215_S] device 1049+215_Suv.ps/vps,1,2 ! Attempting to open device: '1049+215_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1049+215_Sim.ps/vps ! Attempting to open device: '1049+215_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.442 mas, bmaj=4.926 mas, bpa=-13.94 degrees ! Estimated noise=939.278 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.442 x 4.926 at -13.94 degrees (North through East) ! Clean map min=-0.0036196 max=1.0949 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo7-0.4] quit ! Quitting program ! Log file 1049+215_S.log closed on Tue Apr 29 23:36:42 2008