! Started logfile: 0322+222_S.log on Tue Apr 15 19:20:02 2008 observe 0322+222_S.edt ! Reading UV FITS file: 0322+222_S.edt ! AN table 1: 65 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.239618 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0322+222 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 963 lines of history. ! ! Reading 9532 visibilities. ![@gonzo7-0.4 0322+222_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 7.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 776 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 823 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 771 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 800 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.254996Jy sigma=0.003403 ! Fit after self-cal, rms=0.253305Jy sigma=0.003380 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=4.334 mas, bpa=-7.58 degrees ! Estimated noise=1403.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.592694 Jy ! Total flux subtracted in 50 components = 0.592694 Jy ! Clean residual min=-0.025001 max=0.165313 Jy/beam ! Clean residual mean=-0.000116 rms=0.007815 Jy/beam ! Combined flux in latest and established models = 0.592694 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.592694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218974Jy sigma=0.003207 ! Fit after self-cal, rms=0.218974Jy sigma=0.003207 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.138161 Jy ! Total flux subtracted in 50 components = 0.138161 Jy ! Clean residual min=-0.013214 max=0.053031 Jy/beam ! Clean residual mean=-0.000068 rms=0.003595 Jy/beam ! Combined flux in latest and established models = 0.730855 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.730855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124579Jy sigma=0.001760 ! Fit after self-cal, rms=0.124435Jy sigma=0.001759 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0559105 Jy ! Total flux subtracted in 50 components = 0.0559105 Jy ! Clean residual min=-0.009084 max=0.024673 Jy/beam ! Clean residual mean=-0.000050 rms=0.002351 Jy/beam ! Combined flux in latest and established models = 0.786766 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 0.786766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101299Jy sigma=0.001366 ! Fit after self-cal, rms=0.101025Jy sigma=0.001364 ! Inverting map ! Added new window around map position (2.4, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296687 Jy ! Total flux subtracted in 50 components = 0.0296687 Jy ! Clean residual min=-0.007231 max=0.014826 Jy/beam ! Clean residual mean=-0.000042 rms=0.001854 Jy/beam ! Combined flux in latest and established models = 0.816434 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.816434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092910Jy sigma=0.001213 ! Fit after self-cal, rms=0.092650Jy sigma=0.001211 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0192379 Jy ! Total flux subtracted in 50 components = 0.0192379 Jy ! Clean residual min=-0.006199 max=0.010861 Jy/beam ! Clean residual mean=-0.000037 rms=0.001603 Jy/beam ! Combined flux in latest and established models = 0.835672 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.835672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088962Jy sigma=0.001140 ! Fit after self-cal, rms=0.088833Jy sigma=0.001139 ! Inverting map ! Added new window around map position (5.2, -0.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138588 Jy ! Total flux subtracted in 50 components = 0.0138588 Jy ! Clean residual min=-0.006027 max=0.007628 Jy/beam ! Clean residual mean=-0.000033 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.849531 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 36 components and 0.849531 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086917Jy sigma=0.001101 ! Fit after self-cal, rms=0.086832Jy sigma=0.001100 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=5.16 mas, bpa=-6.034 degrees ! Estimated noise=733.677 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147706 Jy ! Component: 100 - total flux cleaned = 0.0232769 Jy ! Total flux subtracted in 100 components = 0.0232769 Jy ! Clean residual min=-0.004292 max=0.004934 Jy/beam ! Clean residual mean=-0.000022 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.872808 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 56 components and 0.872808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084878Jy sigma=0.001059 ! Fit after self-cal, rms=0.084723Jy sigma=0.001057 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 1.00 HH 1.00* ! HN 1.00 KK 1.00 KP 1.00 LA 0.99 ! MC 1.03 MK 1.00 NL 1.00 NY 1.01 ! ON 1.05 OV 0.99 PT 0.99 SC 1.01 ! WF 1.00 WZ 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 GC 1.00 HH 1.00* ! HN 1.00 KK 0.99 KP 0.99 LA 0.99 ! MC 1.01 MK 1.00 NL 1.00 NY 1.01 ! ON 1.02 OV 0.99 PT 0.99 SC 1.00 ! WF 1.00 WZ 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 1.00 HH 1.00* ! HN 1.00 KK 1.00 KP 0.99 LA 0.99 ! MC 1.03 MK 1.00 NL 1.00 NY 1.02 ! ON 1.04 OV 0.99 PT 0.99 SC 1.01 ! WF 1.01 WZ 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 1.00 HH 1.00* ! HN 1.00 KK 0.99 KP 0.99 LA 1.00* ! MC 0.94 MK 1.00 NL 1.00 NY 1.02 ! ON 1.05 OV 0.99 PT 0.99 SC 1.00 ! WF 1.00 WZ 1.01 ! ! ! Fit before self-cal, rms=0.084723Jy sigma=0.001057 ! Fit after self-cal, rms=0.084379Jy sigma=0.001051 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=5.177 mas, bpa=-6.004 degrees ! Estimated noise=730.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423291 Jy ! Component: 100 - total flux cleaned = 0.0064598 Jy ! Total flux subtracted in 100 components = 0.0064598 Jy ! Clean residual min=-0.003331 max=0.004499 Jy/beam ! Clean residual mean=-0.000010 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.879267 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 73 components and 0.879267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084214Jy sigma=0.001048 ! Fit after self-cal, rms=0.084194Jy sigma=0.001047 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (14.4, -6.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00398205 Jy ! Component: 100 - total flux cleaned = 0.00592193 Jy ! Total flux subtracted in 100 components = 0.00592193 Jy ! Clean residual min=-0.003098 max=0.003215 Jy/beam ! Clean residual mean=-0.000006 rms=0.000791 Jy/beam ! Combined flux in latest and established models = 0.885189 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 86 components and 0.885189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084029Jy sigma=0.001044 ! Fit after self-cal, rms=0.083660Jy sigma=0.001039 ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=5.177 mas, bpa=-5.992 degrees ! Estimated noise=730.877 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00259168 Jy ! Component: 100 - total flux cleaned = 0.00425412 Jy ! Total flux subtracted in 100 components = 0.00425412 Jy ! Clean residual min=-0.003173 max=0.002933 Jy/beam ! Clean residual mean=-0.000007 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.889443 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 93 components and 0.889443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083588Jy sigma=0.001038 ! Fit after self-cal, rms=0.083577Jy sigma=0.001038 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0322+222_S ! Writing UV FITS file: 0322+222_S.uvf ! Writing 93 model components to file: 0322+222_S.mod ! wwins: Wrote 4 windows to 0322+222_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 5.177 at -5.992 degrees (North through East) ! Clean map min=-0.003107 max=0.77158 Jy/beam ! Writing clean map to FITS file: 0322+222_S.fits ! Writing difmap environment to: 0322+222_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0322+222_S] device 0322+222_Suv.ps/vps,1,2 ! Attempting to open device: '0322+222_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0322+222_Sim.ps/vps ! Attempting to open device: '0322+222_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=5.177 mas, bpa=-5.992 degrees ! Estimated noise=730.877 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 5.177 at -5.992 degrees (North through East) ! Clean map min=-0.003107 max=0.77158 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo7-0.4] quit ! Quitting program ! Log file 0322+222_S.log closed on Tue Apr 15 19:20:08 2008