! Started logfile: 0234+285_S.log on Tue Apr 15 19:14:22 2008 observe 0234+285_S.edt ! Reading UV FITS file: 0234+285_S.edt ! AN table 1: 112 integrations on 153 of 153 possible baselines. ! Apparent sampling: 0.296043 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0234+285 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 966 lines of history. ! ! Reading 20292 visibilities. ![@gonzo6-0.4 0234+285_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1453 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1460 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1466 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1556 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.407346Jy sigma=0.005067 ! Fit after self-cal, rms=0.381573Jy sigma=0.004615 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.979 mas, bmaj=4.699 mas, bpa=-14.91 degrees ! Estimated noise=1197.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.672038 Jy ! Total flux subtracted in 50 components = 0.672038 Jy ! Clean residual min=-0.034533 max=0.223897 Jy/beam ! Clean residual mean=-0.000211 rms=0.011217 Jy/beam ! Combined flux in latest and established models = 0.672038 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.672038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.458047Jy sigma=0.006102 ! Fit after self-cal, rms=0.457779Jy sigma=0.006101 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.242442 Jy ! Total flux subtracted in 50 components = 0.242442 Jy ! Clean residual min=-0.023645 max=0.114242 Jy/beam ! Clean residual mean=-0.000166 rms=0.007548 Jy/beam ! Combined flux in latest and established models = 0.91448 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 13 components and 0.914481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.322692Jy sigma=0.004228 ! Fit after self-cal, rms=0.320272Jy sigma=0.004215 ! Inverting map ! Added new window around map position (0, 4.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.14454 Jy ! Total flux subtracted in 50 components = 0.14454 Jy ! Clean residual min=-0.018551 max=0.076817 Jy/beam ! Clean residual mean=-0.000136 rms=0.005670 Jy/beam ! Combined flux in latest and established models = 1.05902 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 1.05902 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.254431Jy sigma=0.003253 ! Fit after self-cal, rms=0.252408Jy sigma=0.003241 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102382 Jy ! Total flux subtracted in 50 components = 0.102382 Jy ! Clean residual min=-0.015059 max=0.056438 Jy/beam ! Clean residual mean=-0.000113 rms=0.004440 Jy/beam ! Combined flux in latest and established models = 1.1614 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 39 components and 1.1614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211101Jy sigma=0.002624 ! Fit after self-cal, rms=0.209354Jy sigma=0.002612 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0765837 Jy ! Total flux subtracted in 50 components = 0.0765837 Jy ! Clean residual min=-0.012186 max=0.042520 Jy/beam ! Clean residual mean=-0.000096 rms=0.003566 Jy/beam ! Combined flux in latest and established models = 1.23799 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 51 components and 1.23799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181634Jy sigma=0.002187 ! Fit after self-cal, rms=0.180396Jy sigma=0.002178 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.058155 Jy ! Total flux subtracted in 50 components = 0.058155 Jy ! Clean residual min=-0.010564 max=0.032682 Jy/beam ! Clean residual mean=-0.000082 rms=0.002943 Jy/beam ! Combined flux in latest and established models = 1.29614 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 1.29614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161830Jy sigma=0.001882 ! Fit after self-cal, rms=0.161054Jy sigma=0.001876 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447787 Jy ! Total flux subtracted in 50 components = 0.0447787 Jy ! Clean residual min=-0.009711 max=0.025372 Jy/beam ! Clean residual mean=-0.000071 rms=0.002506 Jy/beam ! Combined flux in latest and established models = 1.34092 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 1.34092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148753Jy sigma=0.001672 ! Fit after self-cal, rms=0.148283Jy sigma=0.001669 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0349215 Jy ! Total flux subtracted in 50 components = 0.0349215 Jy ! Clean residual min=-0.009143 max=0.020115 Jy/beam ! Clean residual mean=-0.000062 rms=0.002204 Jy/beam ! Combined flux in latest and established models = 1.37584 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 88 components and 1.37584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140132Jy sigma=0.001529 ! Fit after self-cal, rms=0.139858Jy sigma=0.001526 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.027581 Jy ! Total flux subtracted in 50 components = 0.027581 Jy ! Clean residual min=-0.008712 max=0.016603 Jy/beam ! Clean residual mean=-0.000055 rms=0.001994 Jy/beam ! Combined flux in latest and established models = 1.40342 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 98 components and 1.40342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134398Jy sigma=0.001430 ! Fit after self-cal, rms=0.134221Jy sigma=0.001428 ! Inverting map ! Added new window around map position (-2.4, 4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222281 Jy ! Total flux subtracted in 50 components = 0.0222281 Jy ! Clean residual min=-0.008445 max=0.016340 Jy/beam ! Clean residual mean=-0.000049 rms=0.001849 Jy/beam ! Combined flux in latest and established models = 1.42565 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 110 components and 1.42565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130492Jy sigma=0.001362 ! Fit after self-cal, rms=0.130383Jy sigma=0.001361 ! Inverting map ! Added new window around map position (1.6, 12.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190854 Jy ! Total flux subtracted in 50 components = 0.0190854 Jy ! Clean residual min=-0.007977 max=0.011036 Jy/beam ! Clean residual mean=-0.000043 rms=0.001738 Jy/beam ! Combined flux in latest and established models = 1.44474 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 116 components and 1.44474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127684Jy sigma=0.001312 ! Fit after self-cal, rms=0.127588Jy sigma=0.001310 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156762 Jy ! Total flux subtracted in 50 components = 0.0156762 Jy ! Clean residual min=-0.007638 max=0.009337 Jy/beam ! Clean residual mean=-0.000038 rms=0.001657 Jy/beam ! Combined flux in latest and established models = 1.46041 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 126 components and 1.46041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125659Jy sigma=0.001275 ! Fit after self-cal, rms=0.125614Jy sigma=0.001274 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132722 Jy ! Total flux subtracted in 50 components = 0.0132722 Jy ! Clean residual min=-0.007365 max=0.008018 Jy/beam ! Clean residual mean=-0.000034 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 1.47368 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 134 components and 1.47368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124210Jy sigma=0.001248 ! Fit after self-cal, rms=0.124187Jy sigma=0.001247 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.228 mas, bmaj=5.591 mas, bpa=-14.18 degrees ! Estimated noise=754.339 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196351 Jy ! Component: 100 - total flux cleaned = 0.0338547 Jy ! Total flux subtracted in 100 components = 0.0338547 Jy ! Clean residual min=-0.005227 max=0.008451 Jy/beam ! Clean residual mean=-0.000053 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 1.50754 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 167 components and 1.50754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121489Jy sigma=0.001195 ! Fit after self-cal, rms=0.121371Jy sigma=0.001193 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120012 Jy ! Component: 100 - total flux cleaned = 0.0210739 Jy ! Total flux subtracted in 100 components = 0.0210739 Jy ! Clean residual min=-0.004567 max=0.006532 Jy/beam ! Clean residual mean=-0.000033 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 1.52861 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 192 components and 1.52861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120361Jy sigma=0.001172 ! Fit after self-cal, rms=0.120296Jy sigma=0.001171 ! Inverting map ! Added new window around map position (-3.2, 10.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00837633 Jy ! Component: 100 - total flux cleaned = 0.0147875 Jy ! Total flux subtracted in 100 components = 0.0147875 Jy ! Clean residual min=-0.004161 max=0.004643 Jy/beam ! Clean residual mean=-0.000019 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 1.5434 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 218 components and 1.5434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119795Jy sigma=0.001161 ! Fit after self-cal, rms=0.119762Jy sigma=0.001160 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 GC 1.01 HH 1.00* ! HN 0.99 KK 1.00 KP 1.00 LA 1.00 ! MC 1.01 MK 1.00 NL 1.00 NY 1.00 ! ON 1.00 OV 1.00 PT 1.00 SC 1.01 ! WF 1.00 WZ 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 GC 1.00 HH 1.00* ! HN 1.00 KK 1.00 KP 0.99 LA 1.00 ! MC 1.01 MK 0.99 NL 1.00 NY 1.01 ! ON 0.99 OV 1.00 PT 1.00 SC 1.01 ! WF 1.00 WZ 1.00 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 GC 1.01 HH 1.00* ! HN 1.00 KK 1.00 KP 1.00 LA 1.00 ! MC 1.01 MK 0.99 NL 1.00 NY 1.00 ! ON 0.99 OV 1.00 PT 1.00 SC 1.00 ! WF 1.00 WZ 1.00 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 GC 0.99 HH 1.00* ! HN 1.00 KK 1.00 KP 1.00 LA 1.24 ! MC 1.01 MK 0.99 NL 1.00 NY 1.01 ! ON 0.99 OV 0.99 PT 1.00 SC 1.01 ! WF 1.01 WZ 1.00 ! ! ! Fit before self-cal, rms=0.119762Jy sigma=0.001160 ! Fit after self-cal, rms=0.119563Jy sigma=0.001156 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.603 mas, bpa=-14.18 degrees ! Estimated noise=753.169 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00545332 Jy ! Component: 100 - total flux cleaned = 0.00813934 Jy ! Total flux subtracted in 100 components = 0.00813934 Jy ! Clean residual min=-0.003619 max=0.004336 Jy/beam ! Clean residual mean=-0.000005 rms=0.000994 Jy/beam ! Combined flux in latest and established models = 1.55154 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 240 components and 1.55154 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119356Jy sigma=0.001152 ! Fit after self-cal, rms=0.119315Jy sigma=0.001151 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (18.8, 16.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00457257 Jy ! Component: 100 - total flux cleaned = 0.00700718 Jy ! Total flux subtracted in 100 components = 0.00700718 Jy ! Clean residual min=-0.003525 max=0.003917 Jy/beam ! Clean residual mean=0.000001 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 1.55855 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 256 components and 1.55855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119129Jy sigma=0.001148 ! Fit after self-cal, rms=0.118215Jy sigma=0.001138 ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.611 mas, bpa=-14.11 degrees ! Estimated noise=753.924 mJy/beam. ! Added new window around map position (47.6, -74.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00386334 Jy ! Component: 100 - total flux cleaned = 0.00630608 Jy ! Total flux subtracted in 100 components = 0.00630608 Jy ! Clean residual min=-0.003550 max=0.003736 Jy/beam ! Clean residual mean=-0.000001 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 1.56485 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 268 components and 1.56485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118036Jy sigma=0.001135 ! Fit after self-cal, rms=0.117850Jy sigma=0.001133 ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.613 mas, bpa=-14.1 degrees ! Estimated noise=753.953 mJy/beam. ! Added new window around map position (38.8, -18.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00349155 Jy ! Component: 100 - total flux cleaned = 0.00534689 Jy ! Total flux subtracted in 100 components = 0.00534689 Jy ! Clean residual min=-0.003511 max=0.003453 Jy/beam ! Clean residual mean=-0.000000 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 1.5702 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 277 components and 1.5702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117707Jy sigma=0.001131 ! Fit after self-cal, rms=0.117632Jy sigma=0.001130 ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.614 mas, bpa=-14.1 degrees ! Estimated noise=753.939 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230713 Jy ! Component: 100 - total flux cleaned = 0.00408498 Jy ! Total flux subtracted in 100 components = 0.00408498 Jy ! Clean residual min=-0.003483 max=0.003422 Jy/beam ! Clean residual mean=0.000001 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 1.57429 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 284 components and 1.57429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117532Jy sigma=0.001129 ! Fit after self-cal, rms=0.117321Jy sigma=0.001128 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0234+285_S ! Writing UV FITS file: 0234+285_S.uvf ! Writing 284 model components to file: 0234+285_S.mod ! wwins: Wrote 8 windows to 0234+285_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.231 x 5.614 at -14.1 degrees (North through East) ! Clean map min=-0.0035977 max=0.91334 Jy/beam ! Writing clean map to FITS file: 0234+285_S.fits ! Writing difmap environment to: 0234+285_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0234+285_S] device 0234+285_Suv.ps/vps,1,2 ! Attempting to open device: '0234+285_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0234+285_Sim.ps/vps ! Attempting to open device: '0234+285_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.231 mas, bmaj=5.614 mas, bpa=-14.1 degrees ! Estimated noise=753.939 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.231 x 5.614 at -14.1 degrees (North through East) ! Clean map min=-0.0035977 max=0.91334 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.4] quit ! Quitting program ! Log file 0234+285_S.log closed on Tue Apr 15 19:14:35 2008