! Started logfile: 1044+719_X.log on Tue Mar 4 21:30:46 2008 observe 1044+719_X.edt ! Reading UV FITS file: 1044+719_X.edt ! AN table 1: 36 integrations on 136 of 136 possible baselines. ! AN table 2: 52 integrations on 136 of 136 possible baselines. ! AN table 3: 136 integrations on 136 of 136 possible baselines. ! AN table 4: 21 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.32569 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1044+719 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1222 lines of history. ! ! Reading 43408 visibilities. ![@gonzo8-0.1 1044+719_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 8.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 350 telescope corrections were flagged in sub-array 1. ! A total of 537 telescope corrections were flagged in sub-array 2. ! A total of 1805 telescope corrections were flagged in sub-array 3. ! A total of 138 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 348 telescope corrections were flagged in sub-array 1. ! A total of 537 telescope corrections were flagged in sub-array 2. ! A total of 1800 telescope corrections were flagged in sub-array 3. ! A total of 152 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 348 telescope corrections were flagged in sub-array 1. ! A total of 530 telescope corrections were flagged in sub-array 2. ! A total of 1794 telescope corrections were flagged in sub-array 3. ! A total of 145 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 363 telescope corrections were flagged in sub-array 1. ! A total of 579 telescope corrections were flagged in sub-array 2. ! A total of 1821 telescope corrections were flagged in sub-array 3. ! A total of 154 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.407245Jy sigma=0.005778 ! Fit after self-cal, rms=0.406841Jy sigma=0.005772 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5471 mas, bmaj=0.673 mas, bpa=-1.531 degrees ! Estimated noise=664.849 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438568 Jy ! Total flux subtracted in 50 components = 0.438568 Jy ! Clean residual min=-0.016687 max=0.156971 Jy/beam ! Clean residual mean=-0.000313 rms=0.005815 Jy/beam ! Combined flux in latest and established models = 0.438568 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.438568 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.320296Jy sigma=0.005486 ! Fit after self-cal, rms=0.320288Jy sigma=0.005486 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.166392 Jy ! Total flux subtracted in 50 components = 0.166392 Jy ! Clean residual min=-0.011174 max=0.076964 Jy/beam ! Clean residual mean=-0.000204 rms=0.003574 Jy/beam ! Combined flux in latest and established models = 0.60496 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 12 components and 0.60496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209786Jy sigma=0.003555 ! Fit after self-cal, rms=0.209736Jy sigma=0.003555 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0929579 Jy ! Total flux subtracted in 50 components = 0.0929579 Jy ! Clean residual min=-0.008355 max=0.049679 Jy/beam ! Clean residual mean=-0.000143 rms=0.002511 Jy/beam ! Combined flux in latest and established models = 0.697918 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.697918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156746Jy sigma=0.002569 ! Fit after self-cal, rms=0.156720Jy sigma=0.002569 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0623002 Jy ! Total flux subtracted in 50 components = 0.0623002 Jy ! Clean residual min=-0.006327 max=0.034051 Jy/beam ! Clean residual mean=-0.000103 rms=0.001845 Jy/beam ! Combined flux in latest and established models = 0.760218 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.760218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126286Jy sigma=0.001967 ! Fit after self-cal, rms=0.126274Jy sigma=0.001967 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0431477 Jy ! Total flux subtracted in 50 components = 0.0431477 Jy ! Clean residual min=-0.004852 max=0.024094 Jy/beam ! Clean residual mean=-0.000075 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.803365 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.803365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108989Jy sigma=0.001599 ! Fit after self-cal, rms=0.108979Jy sigma=0.001599 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0305145 Jy ! Total flux subtracted in 50 components = 0.0305145 Jy ! Clean residual min=-0.003900 max=0.017497 Jy/beam ! Clean residual mean=-0.000056 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.83388 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 38 components and 0.83388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099349Jy sigma=0.001378 ! Fit after self-cal, rms=0.099339Jy sigma=0.001378 ! Inverting map ! Added new window around map position (-0.5, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.02177 Jy ! Total flux subtracted in 50 components = 0.02177 Jy ! Clean residual min=-0.003578 max=0.012773 Jy/beam ! Clean residual mean=-0.000042 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.85565 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.85565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094152Jy sigma=0.001250 ! Fit after self-cal, rms=0.094144Jy sigma=0.001250 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155582 Jy ! Total flux subtracted in 50 components = 0.0155582 Jy ! Clean residual min=-0.003435 max=0.009810 Jy/beam ! Clean residual mean=-0.000032 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.871208 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.871208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091420Jy sigma=0.001179 ! Fit after self-cal, rms=0.091413Jy sigma=0.001179 ! Inverting map ! Added new window around map position (0.6, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114566 Jy ! Total flux subtracted in 50 components = 0.0114566 Jy ! Clean residual min=-0.003355 max=0.006942 Jy/beam ! Clean residual mean=-0.000024 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.882665 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.882665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089947Jy sigma=0.001139 ! Fit after self-cal, rms=0.089938Jy sigma=0.001139 ! Inverting map ! Added new window around map position (1.6, -0.3). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00849033 Jy ! Total flux subtracted in 50 components = 0.00849033 Jy ! Clean residual min=-0.003281 max=0.005975 Jy/beam ! Clean residual mean=-0.000019 rms=0.000782 Jy/beam ! Combined flux in latest and established models = 0.891155 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.891155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089208Jy sigma=0.001118 ! Fit after self-cal, rms=0.089202Jy sigma=0.001118 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7126 mas, bmaj=0.9103 mas, bpa=-5.099 degrees ! Estimated noise=326.532 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102786 Jy ! Component: 100 - total flux cleaned = 0.0161948 Jy ! Total flux subtracted in 100 components = 0.0161949 Jy ! Clean residual min=-0.001772 max=0.004708 Jy/beam ! Clean residual mean=-0.000058 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.90735 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 63 components and 0.90735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088349Jy sigma=0.001092 ! Fit after self-cal, rms=0.088331Jy sigma=0.001092 ! Inverting map ! Added new window around map position (1, 1.1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.004522 Jy ! Component: 100 - total flux cleaned = 0.00707926 Jy ! Total flux subtracted in 100 components = 0.00707926 Jy ! Clean residual min=-0.001628 max=0.002904 Jy/beam ! Clean residual mean=-0.000031 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.914429 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.914429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088133Jy sigma=0.001088 ! Fit after self-cal, rms=0.088121Jy sigma=0.001087 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.02 KP 1.00 LA 1.00 MC 0.99 ! MK 1.01 NL 1.01 NY 1.00 ON 0.98 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.01 ! MK 1.00 NL 1.01 NY 1.02 ON 1.02 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.01 ! MK 1.00 NL 1.00 NY 1.00 ON 1.02 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.01 KP 1.00 LA 1.00 MC 1.01 ! MK 1.01 NL 1.00 NY 1.00 ON 1.02 ! OV 1.00 PT 1.00 SC 1.01 WF 1.01 ! WZ 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.01 KP 1.00 LA 1.00 MC 0.99 ! MK 1.01 NL 1.00 NY 1.00 ON 1.01 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 0.99 ! MK 1.00 NL 1.00 NY 1.01 ON 0.99 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.01 ! MK 1.00 NL 1.00 NY 1.01 ON 1.02 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.01 KP 1.00 LA 1.00 MC 1.00 ! MK 1.01 NL 0.99 NY 1.01 ON 1.01 ! OV 1.00 PT 1.00 SC 1.01 WF 1.01 ! WZ 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.02 KP 1.00 LA 1.00 MC 0.99 ! MK 1.01 NL 1.01 NY 1.00 ON 0.99 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.01 NY 1.01 ON 1.00 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.01 ! MK 1.00 NL 1.00 NY 1.01 ON 1.04 ! OV 1.00 PT 1.00 SC 0.99 WF 1.01 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.01 KP 1.00 LA 1.00 MC 1.00 ! MK 1.01 NL 1.00 NY 1.01 ON 0.99 ! OV 1.00 PT 1.00 SC 1.02 WF 1.01 ! WZ 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.02 KP 1.00 LA 1.00 MC 0.99 ! MK 1.02 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.01 ! MK 1.00 NL 1.00 NY 1.00* ON 1.01 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.01 ! MK 1.00 NL 1.00 NY 1.00 ON 1.03 ! OV 1.00 PT 1.00 SC 1.00 WF 1.02 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.01 KP 1.00 LA 1.00 MC 1.01 ! MK 1.01 NL 1.00 NY 1.01 ON 0.99 ! OV 1.00 PT 1.00 SC 1.02 WF 1.01 ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.088121Jy sigma=0.001087 ! Fit after self-cal, rms=0.088513Jy sigma=0.001085 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7135 mas, bmaj=0.9125 mas, bpa=-4.754 degrees ! Estimated noise=327.018 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000414959 Jy ! Component: 100 - total flux cleaned = 0.000669353 Jy ! Total flux subtracted in 100 components = 0.000669353 Jy ! Clean residual min=-0.001598 max=0.001638 Jy/beam ! Clean residual mean=-0.000016 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.915098 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 82 components and 0.915098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088484Jy sigma=0.001085 ! Fit after self-cal, rms=0.088487Jy sigma=0.001085 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000316054 Jy ! Component: 100 - total flux cleaned = 0.000395895 Jy ! Total flux subtracted in 100 components = 0.000395895 Jy ! Clean residual min=-0.001587 max=0.001600 Jy/beam ! Clean residual mean=-0.000014 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.915494 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 83 components and 0.915494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088473Jy sigma=0.001084 ! Fit after self-cal, rms=0.088509Jy sigma=0.001081 ! Inverting map and beam ! Estimated beam: bmin=0.7133 mas, bmaj=0.9141 mas, bpa=-4.67 degrees ! Estimated noise=327.287 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000534168 Jy ! Component: 100 - total flux cleaned = 0.000766058 Jy ! Total flux subtracted in 100 components = 0.000766058 Jy ! Clean residual min=-0.001576 max=0.001521 Jy/beam ! Clean residual mean=-0.000014 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.91626 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.91626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088493Jy sigma=0.001081 ! Fit after self-cal, rms=0.088489Jy sigma=0.001081 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1044+719_X ! Writing UV FITS file: 1044+719_X.uvf ! Writing 91 model components to file: 1044+719_X.mod ! wwins: Wrote 5 windows to 1044+719_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7133 x 0.9141 at -4.67 degrees (North through East) ! Clean map min=-0.0015297 max=0.65407 Jy/beam ! Writing clean map to FITS file: 1044+719_X.fits ! Writing difmap environment to: 1044+719_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1044+719_X] device 1044+719_Xuv.ps/vps,1,2 ! Attempting to open device: '1044+719_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1044+719_Xim.ps/vps ! Attempting to open device: '1044+719_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=0.7133 mas, bmaj=0.9141 mas, bpa=-4.67 degrees ! Estimated noise=327.287 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7133 x 0.9141 at -4.67 degrees (North through East) ! Clean map min=-0.0015297 max=0.65407 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo8-0.1] quit ! Quitting program ! Log file 1044+719_X.log closed on Tue Mar 4 21:30:59 2008