! Started logfile: 0528+134_X.log on Mon Mar 3 20:03:33 2008 observe 0528+134_X.edt ! Reading UV FITS file: 0528+134_X.edt ! AN table 1: 102 integrations on 136 of 136 possible baselines. ! AN table 2: 15 integrations on 136 of 136 possible baselines. ! AN table 3: 48 integrations on 136 of 136 possible baselines. ! AN table 4: 37 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.226085 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0528+134 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1214 lines of history. ! ! Reading 24844 visibilities. ![@gonzo7-0.1 0528+134_X] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.1 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 7.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 1193 telescope corrections were flagged in sub-array 1. ! A total of 252 telescope corrections were flagged in sub-array 2. ! A total of 425 telescope corrections were flagged in sub-array 3. ! A total of 524 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 1203 telescope corrections were flagged in sub-array 1. ! A total of 234 telescope corrections were flagged in sub-array 2. ! A total of 425 telescope corrections were flagged in sub-array 3. ! A total of 520 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 1197 telescope corrections were flagged in sub-array 1. ! A total of 237 telescope corrections were flagged in sub-array 2. ! A total of 425 telescope corrections were flagged in sub-array 3. ! A total of 532 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 1228 telescope corrections were flagged in sub-array 1. ! A total of 249 telescope corrections were flagged in sub-array 2. ! A total of 436 telescope corrections were flagged in sub-array 3. ! A total of 560 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.794418Jy sigma=0.013867 ! Fit after self-cal, rms=0.794711Jy sigma=0.013908 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.5284 mas, bmaj=1.329 mas, bpa=-11.37 degrees ! Estimated noise=800.825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.13522 Jy ! Total flux subtracted in 50 components = 1.13522 Jy ! Clean residual min=-0.058721 max=0.336896 Jy/beam ! Clean residual mean=0.000088 rms=0.020055 Jy/beam ! Combined flux in latest and established models = 1.13522 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 1.13522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.693963Jy sigma=0.012217 ! Fit after self-cal, rms=0.693861Jy sigma=0.012214 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.360808 Jy ! Total flux subtracted in 50 components = 0.360808 Jy ! Clean residual min=-0.047858 max=0.174878 Jy/beam ! Clean residual mean=0.000073 rms=0.013358 Jy/beam ! Combined flux in latest and established models = 1.49602 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 8 components and 1.49602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466310Jy sigma=0.008223 ! Fit after self-cal, rms=0.465543Jy sigma=0.008217 ! Inverting map ! Added new window around map position (0.7, 0.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201895 Jy ! Total flux subtracted in 50 components = 0.201895 Jy ! Clean residual min=-0.040446 max=0.114703 Jy/beam ! Clean residual mean=0.000060 rms=0.010269 Jy/beam ! Combined flux in latest and established models = 1.69792 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 13 components and 1.69792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361470Jy sigma=0.006262 ! Fit after self-cal, rms=0.356554Jy sigma=0.006217 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134005 Jy ! Total flux subtracted in 50 components = 0.134005 Jy ! Clean residual min=-0.033413 max=0.084766 Jy/beam ! Clean residual mean=0.000053 rms=0.008261 Jy/beam ! Combined flux in latest and established models = 1.83192 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 1.83192 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294878Jy sigma=0.005000 ! Fit after self-cal, rms=0.291591Jy sigma=0.004970 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.095318 Jy ! Total flux subtracted in 50 components = 0.095318 Jy ! Clean residual min=-0.028747 max=0.064807 Jy/beam ! Clean residual mean=0.000046 rms=0.007005 Jy/beam ! Combined flux in latest and established models = 1.92724 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 1.92724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.253594Jy sigma=0.004180 ! Fit after self-cal, rms=0.251832Jy sigma=0.004164 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0727716 Jy ! Total flux subtracted in 50 components = 0.0727716 Jy ! Clean residual min=-0.025447 max=0.051775 Jy/beam ! Clean residual mean=0.000041 rms=0.006167 Jy/beam ! Combined flux in latest and established models = 2.00001 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 42 components and 2.00001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226472Jy sigma=0.003611 ! Fit after self-cal, rms=0.225492Jy sigma=0.003602 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0570775 Jy ! Total flux subtracted in 50 components = 0.0570775 Jy ! Clean residual min=-0.024447 max=0.042846 Jy/beam ! Clean residual mean=0.000036 rms=0.005595 Jy/beam ! Combined flux in latest and established models = 2.05709 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 49 components and 2.05709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208395Jy sigma=0.003210 ! Fit after self-cal, rms=0.207754Jy sigma=0.003204 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.695 mas, bmaj=1.607 mas, bpa=-7.52 degrees ! Estimated noise=387.328 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0856804 Jy ! Component: 100 - total flux cleaned = 0.137046 Jy ! Total flux subtracted in 100 components = 0.137046 Jy ! Clean residual min=-0.017623 max=0.045026 Jy/beam ! Clean residual mean=0.000406 rms=0.005713 Jy/beam ! Combined flux in latest and established models = 2.19414 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 78 components and 2.19414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179897Jy sigma=0.002467 ! Fit after self-cal, rms=0.178108Jy sigma=0.002442 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0382548 Jy ! Component: 100 - total flux cleaned = 0.0620196 Jy ! Total flux subtracted in 100 components = 0.0620196 Jy ! Clean residual min=-0.016998 max=0.031514 Jy/beam ! Clean residual mean=0.000297 rms=0.004592 Jy/beam ! Combined flux in latest and established models = 2.25616 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 2.25616 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172352Jy sigma=0.002255 ! Fit after self-cal, rms=0.171608Jy sigma=0.002244 ! Inverting map ! Added new window around map position (1.3, 3.7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031087 Jy ! Component: 100 - total flux cleaned = 0.0506823 Jy ! Total flux subtracted in 100 components = 0.0506823 Jy ! Clean residual min=-0.018127 max=0.019157 Jy/beam ! Clean residual mean=0.000180 rms=0.003979 Jy/beam ! Combined flux in latest and established models = 2.30684 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 120 components and 2.30684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166623Jy sigma=0.002130 ! Fit after self-cal, rms=0.166031Jy sigma=0.002119 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 GC 1.02 HN 0.97 ! KK 1.00 KP 0.98 LA 0.97 MC 0.95 ! MK 0.95 NL 1.12 NY 1.04 ON 1.02 ! OV 0.99 PT 0.96 SC 1.01 WF 0.97 ! WZ 0.94 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 GC 0.98 HN 0.99 ! KK 1.14 KP 1.00 LA 1.00 MC 1.28 ! MK 1.04 NL 0.93 NY 1.04 ON 1.23 ! OV 1.02 PT 1.00* SC 0.97 WF 1.00 ! WZ 1.35 ! ! A total of 39 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 0.97 ! KK 1.00* KP 1.00* LA 1.00* MC 0.96 ! MK 1.00* NL 1.12 NY 0.92 ON 1.04 ! OV 1.00* PT 1.00* SC 1.03 WF 0.95 ! WZ 1.00* ! ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 GC 1.11 HN 0.96 ! KK 0.98 KP 0.98 LA 0.99 MC 0.95 ! MK 0.93 NL 1.13 NY 1.04 ON 1.01 ! OV 0.98 PT 0.98 SC 1.03 WF 0.96 ! WZ 0.86 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GC 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MC 1.03 ! MK 1.00* NL 1.00* NY 0.97 ON 0.92 ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.01 GC 1.03 HN 0.98 ! KK 1.14 KP 1.00 LA 1.01 MC 1.26 ! MK 1.03 NL 0.89 NY 1.01 ON 1.22 ! OV 1.00 PT 1.00* SC 0.97 WF 0.97 ! WZ 1.29 ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 0.97 ! KK 1.00* KP 1.00* LA 1.00* MC 0.96 ! MK 1.00* NL 1.08 NY 0.94 ON 1.04 ! OV 1.00* PT 1.00* SC 1.02 WF 0.97 ! WZ 1.00* ! ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 GC 1.15 HN 0.97 ! KK 0.99 KP 1.01 LA 0.97 MC 0.97 ! MK 0.96 NL 1.14 NY 1.03 ON 1.00 ! OV 0.99 PT 0.98 SC 0.99 WF 1.03 ! WZ 0.87 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 1.00* GC 1.00* HN 1.00* ! KK 1.00* KP 1.00* LA 1.00* MC 1.03 ! MK 1.00* NL 1.00* NY 1.01 ON 0.95 ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.01 GC 0.96 HN 1.00 ! KK 1.07 KP 0.99 LA 0.99 MC 1.35 ! MK 1.04 NL 0.89 NY 1.03 ON 1.19 ! OV 1.02 PT 1.00* SC 1.00 WF 0.99 ! WZ 1.27 ! ! A total of 21 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 0.98 ! KK 1.00* KP 1.00* LA 1.00* MC 1.02 ! MK 1.00* NL 1.07 NY 0.92 ON 1.05 ! OV 1.00* PT 1.00* SC 1.03 WF 1.03 ! WZ 1.00* ! ! ! Correcting IF 4. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 GC 1.00 HN 0.98 ! KK 0.97 KP 0.98 LA 0.99 MC 0.99 ! MK 0.94 NL 1.10 NY 1.05 ON 1.00 ! OV 1.00 PT 0.99 SC 1.02 WF 1.08 ! WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.02 GC 1.00 HN 0.99 ! KK 1.05 KP 1.01 LA 0.99 MC 1.39 ! MK 1.02 NL 0.92 NY 1.02 ON 1.08 ! OV 0.99 PT 1.00* SC 0.97 WF 1.02 ! WZ 1.16 ! ! A total of 33 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 0.96 ! KK 1.00* KP 1.00* LA 1.00* MC 1.10 ! MK 1.00* NL 1.08 NY 0.96 ON 1.07 ! OV 1.00* PT 1.00* SC 1.08 WF 1.07 ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.166031Jy sigma=0.002119 ! Fit after self-cal, rms=0.121387Jy sigma=0.001490 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6975 mas, bmaj=1.621 mas, bpa=-7.058 degrees ! Estimated noise=390.136 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00728203 Jy ! Component: 100 - total flux cleaned = 0.00944318 Jy ! Total flux subtracted in 100 components = 0.00944318 Jy ! Clean residual min=-0.009073 max=0.008143 Jy/beam ! Clean residual mean=0.000068 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 2.31628 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 136 components and 2.31628 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119445Jy sigma=0.001455 ! Fit after self-cal, rms=0.119210Jy sigma=0.001452 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.7, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393253 Jy ! Component: 100 - total flux cleaned = 0.00566112 Jy ! Total flux subtracted in 100 components = 0.00566112 Jy ! Clean residual min=-0.008601 max=0.006743 Jy/beam ! Clean residual mean=0.000050 rms=0.001571 Jy/beam ! Combined flux in latest and established models = 2.32194 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 144 components and 2.32194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118037Jy sigma=0.001431 ! Fit after self-cal, rms=0.109023Jy sigma=0.001298 ! Inverting map and beam ! Estimated beam: bmin=0.6975 mas, bmaj=1.626 mas, bpa=-7.059 degrees ! Estimated noise=390.303 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149617 Jy ! Component: 100 - total flux cleaned = 0.00202294 Jy ! Total flux subtracted in 100 components = 0.00202294 Jy ! Clean residual min=-0.004715 max=0.004738 Jy/beam ! Clean residual mean=0.000016 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 2.32397 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 147 components and 2.32397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108216Jy sigma=0.001284 ! Fit after self-cal, rms=0.108045Jy sigma=0.001282 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0528+134_X ! Writing UV FITS file: 0528+134_X.uvf ! Writing 147 model components to file: 0528+134_X.mod ! wwins: Wrote 4 windows to 0528+134_X.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6975 x 1.626 at -7.059 degrees (North through East) ! Clean map min=-0.0043437 max=1.5646 Jy/beam ! Writing clean map to FITS file: 0528+134_X.fits ! Writing difmap environment to: 0528+134_X.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0528+134_X] device 0528+134_Xuv.ps/vps,1,2 ! Attempting to open device: '0528+134_Xuv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0528+134_Xim.ps/vps ! Attempting to open device: '0528+134_Xim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=0.6975 mas, bmaj=1.626 mas, bpa=-7.059 degrees ! Estimated noise=390.303 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6975 x 1.626 at -7.059 degrees (North through East) ! Clean map min=-0.0043437 max=1.5646 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo7-0.1] quit ! Quitting program ! Log file 0528+134_X.log closed on Mon Mar 3 20:03:43 2008