! Started logfile: 0212+735_X.log on Thu Feb 14 23:51:48 2008
observe 0212+735_X.edt
! Reading UV FITS file: 0212+735_X.edt
! AN table 1: 154 integrations on 136 of 136 possible baselines.
! AN table 2: 153 integrations on 136 of 136 possible baselines.
! AN table 3: 90 integrations on 136 of 136 possible baselines.
! Apparent sampling: 0.350719 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0212+735
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1238 lines of history.
! 
! Reading 75744 visibilities.
![@gonzo5-0.1 0212+735_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 5.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1942 telescope corrections were flagged in sub-array 1.
!  A total of 1557 telescope corrections were flagged in sub-array 2.
!  A total of 973 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 1942 telescope corrections were flagged in sub-array 1.
!  A total of 1560 telescope corrections were flagged in sub-array 2.
!  A total of 973 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 1945 telescope corrections were flagged in sub-array 1.
!  A total of 1567 telescope corrections were flagged in sub-array 2.
!  A total of 951 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 1990 telescope corrections were flagged in sub-array 1.
!  A total of 1646 telescope corrections were flagged in sub-array 2.
!  A total of 975 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=0.983803Jy  sigma=0.016864
! Fit after  self-cal, rms=0.974428Jy  sigma=0.016719
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5598 mas, bmaj=0.6493 mas, bpa=55.22 degrees
! Estimated noise=558.166 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.04449 Jy
! Total flux subtracted in 50 components = 1.04449 Jy
! Clean residual min=-0.059063 max=0.401050 Jy/beam
! Clean residual mean=-0.000393 rms=0.014063 Jy/beam
! Combined flux in latest and established models = 1.04449 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 1.04449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.936723Jy  sigma=0.016131
! Fit after  self-cal, rms=0.936506Jy  sigma=0.016129
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.454152 Jy
! Total flux subtracted in 50 components = 0.454152 Jy
! Clean residual min=-0.038979 max=0.224337 Jy/beam
! Clean residual mean=-0.000271 rms=0.009085 Jy/beam
! Combined flux in latest and established models = 1.49864 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 1.49864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.616952Jy  sigma=0.010770
! Fit after  self-cal, rms=0.616402Jy  sigma=0.010765
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.268724 Jy
! Total flux subtracted in 50 components = 0.268724 Jy
! Clean residual min=-0.027229 max=0.142825 Jy/beam
! Clean residual mean=-0.000199 rms=0.006451 Jy/beam
! Combined flux in latest and established models = 1.76736 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 1.76736 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.441158Jy  sigma=0.007736
! Fit after  self-cal, rms=0.440443Jy  sigma=0.007730
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.180782 Jy
! Total flux subtracted in 50 components = 0.180782 Jy
! Clean residual min=-0.020373 max=0.098526 Jy/beam
! Clean residual mean=-0.000150 rms=0.004789 Jy/beam
! Combined flux in latest and established models = 1.94815 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 22 components and 1.94815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.330977Jy  sigma=0.005781
! Fit after  self-cal, rms=0.330348Jy  sigma=0.005776
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126229 Jy
! Total flux subtracted in 50 components = 0.126229 Jy
! Clean residual min=-0.019291 max=0.069631 Jy/beam
! Clean residual mean=-0.000116 rms=0.003716 Jy/beam
! Combined flux in latest and established models = 2.07438 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 25 components and 2.07438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.259082Jy  sigma=0.004472
! Fit after  self-cal, rms=0.258491Jy  sigma=0.004468
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0903965 Jy
! Total flux subtracted in 50 components = 0.0903965 Jy
! Clean residual min=-0.019942 max=0.052138 Jy/beam
! Clean residual mean=-0.000092 rms=0.003016 Jy/beam
! Combined flux in latest and established models = 2.16477 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 30 components and 2.16477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.212716Jy  sigma=0.003598
! Fit after  self-cal, rms=0.212163Jy  sigma=0.003593
! Inverting map 
! Added new window around map position (-0.6, 0.4).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0674197 Jy
! Total flux subtracted in 50 components = 0.0674197 Jy
! Clean residual min=-0.019246 max=0.039238 Jy/beam
! Clean residual mean=-0.000074 rms=0.002533 Jy/beam
! Combined flux in latest and established models = 2.23219 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 9 model components to the UV plane model.
! The established model now contains 35 components and 2.23219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.182575Jy  sigma=0.002999
! Fit after  self-cal, rms=0.181977Jy  sigma=0.002994
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0503067 Jy
! Total flux subtracted in 50 components = 0.0503067 Jy
! Clean residual min=-0.019133 max=0.034427 Jy/beam
! Clean residual mean=-0.000060 rms=0.002222 Jy/beam
! Combined flux in latest and established models = 2.2825 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 36 components and 2.2825 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.163201Jy  sigma=0.002593
! Fit after  self-cal, rms=0.162807Jy  sigma=0.002590
! Inverting map 
! Added new window around map position (1.1, -0.1).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0400251 Jy
! Total flux subtracted in 50 components = 0.0400251 Jy
! Clean residual min=-0.017757 max=0.030784 Jy/beam
! Clean residual mean=-0.000050 rms=0.002004 Jy/beam
! Combined flux in latest and established models = 2.32252 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 41 components and 2.32252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150212Jy  sigma=0.002308
! Fit after  self-cal, rms=0.149818Jy  sigma=0.002305
! Inverting map 
! Added new window around map position (2.5, -0.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0354139 Jy
! Total flux subtracted in 50 components = 0.0354139 Jy
! Clean residual min=-0.017574 max=0.024742 Jy/beam
! Clean residual mean=-0.000043 rms=0.001804 Jy/beam
! Combined flux in latest and established models = 2.35794 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 44 components and 2.35794 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139438Jy  sigma=0.002073
! Fit after  self-cal, rms=0.138653Jy  sigma=0.002068
! Inverting map 
! Added new window around map position (1.6, -0.9).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0283559 Jy
! Total flux subtracted in 50 components = 0.0283559 Jy
! Clean residual min=-0.017005 max=0.020614 Jy/beam
! Clean residual mean=-0.000037 rms=0.001646 Jy/beam
! Combined flux in latest and established models = 2.38629 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 2.38629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.131559Jy  sigma=0.001901
! Fit after  self-cal, rms=0.131104Jy  sigma=0.001898
! Inverting map 
! Added new window around map position (0.5, -0.7).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0214483 Jy
! Total flux subtracted in 50 components = 0.0214483 Jy
! Clean residual min=-0.015321 max=0.015342 Jy/beam
! Clean residual mean=-0.000032 rms=0.001525 Jy/beam
! Combined flux in latest and established models = 2.40774 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 2.40774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.126126Jy  sigma=0.001781
! Fit after  self-cal, rms=0.125901Jy  sigma=0.001780
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0157601 Jy
! Total flux subtracted in 50 components = 0.0157601 Jy
! Clean residual min=-0.013206 max=0.013365 Jy/beam
! Clean residual mean=-0.000028 rms=0.001432 Jy/beam
! Combined flux in latest and established models = 2.4235 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 55 components and 2.4235 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.122425Jy  sigma=0.001699
! Fit after  self-cal, rms=0.122290Jy  sigma=0.001698
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136748 Jy
! Total flux subtracted in 50 components = 0.0136748 Jy
! Clean residual min=-0.011563 max=0.011621 Jy/beam
! Clean residual mean=-0.000025 rms=0.001358 Jy/beam
! Combined flux in latest and established models = 2.43718 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 57 components and 2.43718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119580Jy  sigma=0.001634
! Fit after  self-cal, rms=0.119472Jy  sigma=0.001633
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112713 Jy
! Total flux subtracted in 50 components = 0.0112713 Jy
! Clean residual min=-0.010182 max=0.010214 Jy/beam
! Clean residual mean=-0.000023 rms=0.001300 Jy/beam
! Combined flux in latest and established models = 2.44845 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 60 components and 2.44845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117430Jy  sigma=0.001584
! Fit after  self-cal, rms=0.117347Jy  sigma=0.001584
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00880507 Jy
! Total flux subtracted in 50 components = 0.00880507 Jy
! Clean residual min=-0.009031 max=0.009100 Jy/beam
! Clean residual mean=-0.000021 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 2.45725 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 2.45725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115803Jy  sigma=0.001547
! Fit after  self-cal, rms=0.115740Jy  sigma=0.001547
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00785384 Jy
! Total flux subtracted in 50 components = 0.00785384 Jy
! Clean residual min=-0.008070 max=0.008435 Jy/beam
! Clean residual mean=-0.000019 rms=0.001213 Jy/beam
! Combined flux in latest and established models = 2.46511 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 2.46511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.114508Jy  sigma=0.001517
! Fit after  self-cal, rms=0.114456Jy  sigma=0.001517
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00700994 Jy
! Total flux subtracted in 50 components = 0.00700994 Jy
! Clean residual min=-0.007604 max=0.008384 Jy/beam
! Clean residual mean=-0.000017 rms=0.001181 Jy/beam
! Combined flux in latest and established models = 2.47212 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 63 components and 2.47212 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113477Jy  sigma=0.001493
! Fit after  self-cal, rms=0.113435Jy  sigma=0.001493
! Inverting map 
! Added new window around map position (13.7, -0.6).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695838 Jy
! Total flux subtracted in 50 components = 0.00695838 Jy
! Clean residual min=-0.007563 max=0.007833 Jy/beam
! Clean residual mean=-0.000016 rms=0.001153 Jy/beam
! Combined flux in latest and established models = 2.47908 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 2.47908 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112422Jy  sigma=0.001468
! Fit after  self-cal, rms=0.112392Jy  sigma=0.001468
! Inverting map 
! Added new window around map position (2.7, -1.3).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00645554 Jy
! Total flux subtracted in 50 components = 0.00645554 Jy
! Clean residual min=-0.007577 max=0.007177 Jy/beam
! Clean residual mean=-0.000015 rms=0.001129 Jy/beam
! Combined flux in latest and established models = 2.48553 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 21 model components to the UV plane model.
! The established model now contains 75 components and 2.48553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111543Jy  sigma=0.001447
! Fit after  self-cal, rms=0.111512Jy  sigma=0.001447
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7636 mas, bmaj=0.8807 mas, bpa=50.29 degrees
! Estimated noise=243.343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0223871 Jy
! Component: 100  -  total flux cleaned = 0.037637 Jy
! Total flux subtracted in 100 components = 0.037637 Jy
! Clean residual min=-0.004570 max=0.011252 Jy/beam
! Clean residual mean=-0.000063 rms=0.001474 Jy/beam
! Combined flux in latest and established models = 2.52317 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 38 model components to the UV plane model.
! The established model now contains 103 components and 2.52317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107884Jy  sigma=0.001345
! Fit after  self-cal, rms=0.107510Jy  sigma=0.001338
! Inverting map 
! Added new window around map position (12.8, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0138216 Jy
! Component: 100  -  total flux cleaned = 0.0241337 Jy
! Total flux subtracted in 100 components = 0.0241337 Jy
! Clean residual min=-0.003520 max=0.009471 Jy/beam
! Clean residual mean=-0.000048 rms=0.001188 Jy/beam
! Combined flux in latest and established models = 2.5473 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 125 components and 2.5473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.106059Jy  sigma=0.001294
! Fit after  self-cal, rms=0.105911Jy  sigma=0.001292
! Inverting map 
! Added new window around map position (6.3, -1.3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104577 Jy
! Component: 100  -  total flux cleaned = 0.0186401 Jy
! Total flux subtracted in 100 components = 0.0186401 Jy
! Clean residual min=-0.003115 max=0.007448 Jy/beam
! Clean residual mean=-0.000031 rms=0.000980 Jy/beam
! Combined flux in latest and established models = 2.56594 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 39 model components to the UV plane model.
! The established model now contains 140 components and 2.56594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105017Jy  sigma=0.001265
! Fit after  self-cal, rms=0.104921Jy  sigma=0.001264
! Inverting map 
! Added new window around map position (4.1, -1.1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00833984 Jy
! Component: 100  -  total flux cleaned = 0.0148267 Jy
! Total flux subtracted in 100 components = 0.0148267 Jy
! Clean residual min=-0.002916 max=0.006163 Jy/beam
! Clean residual mean=-0.000018 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 2.58077 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 42 model components to the UV plane model.
! The established model now contains 163 components and 2.58077 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104347Jy  sigma=0.001246
! Fit after  self-cal, rms=0.104291Jy  sigma=0.001245
! Inverting map 
! Added new window around map position (14.8, -0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00690257 Jy
! Component: 100  -  total flux cleaned = 0.01226 Jy
! Total flux subtracted in 100 components = 0.01226 Jy
! Clean residual min=-0.002784 max=0.004523 Jy/beam
! Clean residual mean=-0.000013 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 2.59303 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 34 model components to the UV plane model.
! The established model now contains 179 components and 2.59303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103869Jy  sigma=0.001234
! Fit after  self-cal, rms=0.103831Jy  sigma=0.001233
! Inverting map 
! Added new window around map position (1.9, 0.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0052356 Jy
! Component: 100  -  total flux cleaned = 0.00785733 Jy
! Total flux subtracted in 100 components = 0.00785733 Jy
! Clean residual min=-0.002978 max=0.003924 Jy/beam
! Clean residual mean=-0.000008 rms=0.000658 Jy/beam
! Combined flux in latest and established models = 2.60089 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 36 model components to the UV plane model.
! The established model now contains 197 components and 2.60089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103559Jy  sigma=0.001227
! Fit after  self-cal, rms=0.103534Jy  sigma=0.001226
! Inverting map 
! Added new window around map position (7.9, -1.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00341775 Jy
! Component: 100  -  total flux cleaned = 0.00495874 Jy
! Total flux subtracted in 100 components = 0.00495874 Jy
! Clean residual min=-0.003036 max=0.002747 Jy/beam
! Clean residual mean=-0.000005 rms=0.000618 Jy/beam
! Combined flux in latest and established models = 2.60584 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 206 components and 2.60584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103321Jy  sigma=0.001222
! Fit after  self-cal, rms=0.103307Jy  sigma=0.001221
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        0.99     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00*    HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        0.99     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00*    HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00*    HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        0.99     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        0.99     
!   MK        1.00     NL        1.00     NY        1.00     ON        0.99     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00*    HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
! 
! Fit before self-cal, rms=0.103307Jy  sigma=0.001221
! Fit after  self-cal, rms=0.103081Jy  sigma=0.001221
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7633 mas, bmaj=0.8806 mas, bpa=50.25 degrees
! Estimated noise=243.019 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150332 Jy
! Component: 100  -  total flux cleaned = 0.00288362 Jy
! Total flux subtracted in 100 components = 0.00288362 Jy
! Clean residual min=-0.002880 max=0.002637 Jy/beam
! Clean residual mean=-0.000004 rms=0.000584 Jy/beam
! Combined flux in latest and established models = 2.60873 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 214 components and 2.60873 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102908Jy  sigma=0.001217
! Fit after  self-cal, rms=0.102899Jy  sigma=0.001217
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145834 Jy
! Component: 100  -  total flux cleaned = 0.00268806 Jy
! Total flux subtracted in 100 components = 0.00268806 Jy
! Clean residual min=-0.002874 max=0.002580 Jy/beam
! Clean residual mean=-0.000002 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 2.61142 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 40 model components to the UV plane model.
! The established model now contains 223 components and 2.61142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102760Jy  sigma=0.001215
! Fit after  self-cal, rms=0.102797Jy  sigma=0.001214
! Inverting map and beam 
! Estimated beam: bmin=0.7632 mas, bmaj=0.8805 mas, bpa=50.27 degrees
! Estimated noise=242.957 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140607 Jy
! Component: 100  -  total flux cleaned = 0.00246346 Jy
! Total flux subtracted in 100 components = 0.00246346 Jy
! Clean residual min=-0.003013 max=0.002479 Jy/beam
! Clean residual mean=-0.000001 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 2.61388 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 37 model components to the UV plane model.
! The established model now contains 229 components and 2.61388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102670Jy  sigma=0.001211
! Fit after  self-cal, rms=0.102659Jy  sigma=0.001211
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0212+735_X
! Writing UV FITS file: 0212+735_X.uvf
! Writing 229 model components to file: 0212+735_X.mod
! wwins: Wrote 14 windows to 0212+735_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7632 x 0.8805 at 50.27 degrees (North through East)
! Clean map  min=-0.0021951  max=1.5163 Jy/beam
! Writing clean map to FITS file: 0212+735_X.fits
! Writing difmap environment to: 0212+735_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0212+735_X]
device 0212+735_Xuv.ps/vps,1,2
! Attempting to open device: '0212+735_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0212+735_Xim.ps/vps
! Attempting to open device: '0212+735_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.7632 mas, bmaj=0.8805 mas, bpa=50.27 degrees
! Estimated noise=242.957 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7632 x 0.8805 at 50.27 degrees (North through East)
! Clean map  min=-0.0021951  max=1.5163 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo5-0.1]
quit
! Quitting program
! Log file 0212+735_X.log closed on Thu Feb 14 23:52:20 2008