! Started logfile: 0133+476_X.log on Thu Feb 14 23:14:17 2008
observe 0133+476_X.edt
! Reading UV FITS file: 0133+476_X.edt
! AN table 1: 43 integrations on 136 of 136 possible baselines.
! AN table 2: 45 integrations on 136 of 136 possible baselines.
! AN table 3: 50 integrations on 136 of 136 possible baselines.
! AN table 4: 2 integrations on 136 of 136 possible baselines.
! Apparent sampling: 0.39333 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: 0133+476
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40997e+09        8e+06          1        8e+06
!  02        2  8.47997e+09        8e+06          1        8e+06
!  03        3  8.79497e+09        8e+06          1        8e+06
!  04        4  8.89997e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 1238 lines of history.
! 
! Reading 29956 visibilities.
![@gonzo6-0.1 0133+476_X]
print "***********************************"
! *********************************** 
print "*** Using gonzo instruction set ***"
! *** Using gonzo instruction set *** 
print "***********************************"
! *********************************** 
float field_size
field_size = 1024
float field_cell
field_cell = 0.1
integer clean_niter
clean_niter = 50
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float win_mult
win_mult = 1.8
float solint
solint = 3.6/6.0
logical doflt
doflt = true
logical doamp
float new_peak
float flux_cutoff
mapsize field_size,field_cell
! Map grid = 1024x1024 pixels with 0.100x0.100 milli-arcsec cellsize.
select
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 369 telescope corrections were flagged in sub-array 1.
!  A total of 487 telescope corrections were flagged in sub-array 2.
!  A total of 396 telescope corrections were flagged in sub-array 3.
!  A total of 34 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 369 telescope corrections were flagged in sub-array 1.
!  A total of 483 telescope corrections were flagged in sub-array 2.
!  A total of 393 telescope corrections were flagged in sub-array 3.
!  A total of 34 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 369 telescope corrections were flagged in sub-array 1.
!  A total of 487 telescope corrections were flagged in sub-array 2.
!  A total of 392 telescope corrections were flagged in sub-array 3.
!  A total of 34 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 398 telescope corrections were flagged in sub-array 1.
!  A total of 487 telescope corrections were flagged in sub-array 2.
!  A total of 448 telescope corrections were flagged in sub-array 3.
!  A total of 34 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=0.882542Jy  sigma=0.014539
! Fit after  self-cal, rms=0.880975Jy  sigma=0.014513
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvweight 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5509 mas, bmaj=0.7395 mas, bpa=18.86 degrees
! Estimated noise=665.876 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.37334 Jy
! Total flux subtracted in 50 components = 1.37334 Jy
! Clean residual min=-0.039217 max=0.383243 Jy/beam
! Clean residual mean=0.000179 rms=0.012698 Jy/beam
! Combined flux in latest and established models = 1.37334 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1.37334 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.539485Jy  sigma=0.009144
! Fit after  self-cal, rms=0.539480Jy  sigma=0.009144
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.331551 Jy
! Total flux subtracted in 50 components = 0.331551 Jy
! Clean residual min=-0.019318 max=0.134309 Jy/beam
! Clean residual mean=0.000100 rms=0.006221 Jy/beam
! Combined flux in latest and established models = 1.70489 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 1.70489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.292309Jy  sigma=0.004974
! Fit after  self-cal, rms=0.291511Jy  sigma=0.004972
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146766 Jy
! Total flux subtracted in 50 components = 0.146766 Jy
! Clean residual min=-0.012327 max=0.068108 Jy/beam
! Clean residual mean=0.000066 rms=0.003959 Jy/beam
! Combined flux in latest and established models = 1.85166 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 10 model components to the UV plane model.
! The established model now contains 11 components and 1.85166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.203710Jy  sigma=0.003359
! Fit after  self-cal, rms=0.201740Jy  sigma=0.003350
! Inverting map 
! Added new window around map position (-0.3, 0.7).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0822627 Jy
! Total flux subtracted in 50 components = 0.0822627 Jy
! Clean residual min=-0.009251 max=0.041645 Jy/beam
! Clean residual mean=0.000048 rms=0.002865 Jy/beam
! Combined flux in latest and established models = 1.93392 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 8 model components to the UV plane model.
! The established model now contains 16 components and 1.93392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.161130Jy  sigma=0.002553
! Fit after  self-cal, rms=0.159705Jy  sigma=0.002545
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0528703 Jy
! Total flux subtracted in 50 components = 0.0528703 Jy
! Clean residual min=-0.007795 max=0.028302 Jy/beam
! Clean residual mean=0.000037 rms=0.002248 Jy/beam
! Combined flux in latest and established models = 1.98679 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 1.98679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.138099Jy  sigma=0.002088
! Fit after  self-cal, rms=0.137339Jy  sigma=0.002083
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0374363 Jy
! Total flux subtracted in 50 components = 0.0374363 Jy
! Clean residual min=-0.006732 max=0.020909 Jy/beam
! Clean residual mean=0.000029 rms=0.001858 Jy/beam
! Combined flux in latest and established models = 2.02423 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 17 model components to the UV plane model.
! The established model now contains 32 components and 2.02423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124934Jy  sigma=0.001797
! Fit after  self-cal, rms=0.124501Jy  sigma=0.001794
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0279813 Jy
! Total flux subtracted in 50 components = 0.0279813 Jy
! Clean residual min=-0.006032 max=0.015765 Jy/beam
! Clean residual mean=0.000023 rms=0.001597 Jy/beam
! Combined flux in latest and established models = 2.05221 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 2.05221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116936Jy  sigma=0.001606
! Fit after  self-cal, rms=0.116655Jy  sigma=0.001604
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0212853 Jy
! Total flux subtracted in 50 components = 0.0212853 Jy
! Clean residual min=-0.005616 max=0.012212 Jy/beam
! Clean residual mean=0.000018 rms=0.001422 Jy/beam
! Combined flux in latest and established models = 2.07349 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 20 model components to the UV plane model.
! The established model now contains 46 components and 2.07349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112055Jy  sigma=0.001482
! Fit after  self-cal, rms=0.111863Jy  sigma=0.001480
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165191 Jy
! Total flux subtracted in 50 components = 0.0165191 Jy
! Clean residual min=-0.005280 max=0.009771 Jy/beam
! Clean residual mean=0.000015 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 2.09001 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 2.09001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109021Jy  sigma=0.001400
! Fit after  self-cal, rms=0.108888Jy  sigma=0.001399
! Inverting map 
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0129742 Jy
! Total flux subtracted in 50 components = 0.0129742 Jy
! Clean residual min=-0.005041 max=0.009492 Jy/beam
! Clean residual mean=0.000012 rms=0.001220 Jy/beam
! Combined flux in latest and established models = 2.10299 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 2.10299 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.107104Jy  sigma=0.001345
! Fit after  self-cal, rms=0.107014Jy  sigma=0.001345
! Inverting map 
! Added new window around map position (-1.5, 2.2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110586 Jy
! Total flux subtracted in 50 components = 0.0110586 Jy
! Clean residual min=-0.005091 max=0.008177 Jy/beam
! Clean residual mean=0.000010 rms=0.001158 Jy/beam
! Combined flux in latest and established models = 2.11405 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 2.11404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105787Jy  sigma=0.001307
! Fit after  self-cal, rms=0.105694Jy  sigma=0.001307
! Inverting map 
! Added new window around map position (-1.7, 0.9).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00948758 Jy
! Total flux subtracted in 50 components = 0.00948758 Jy
! Clean residual min=-0.005156 max=0.007172 Jy/beam
! Clean residual mean=0.000009 rms=0.001108 Jy/beam
! Combined flux in latest and established models = 2.12353 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 61 components and 2.12353 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104792Jy  sigma=0.001278
! Fit after  self-cal, rms=0.104720Jy  sigma=0.001278
! Inverting map 
! Added new window around map position (-0.7, -1.2).
! clean: niter=50  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0081924 Jy
! Total flux subtracted in 50 components = 0.0081924 Jy
! Clean residual min=-0.005207 max=0.006255 Jy/beam
! Clean residual mean=0.000007 rms=0.001069 Jy/beam
! Combined flux in latest and established models = 2.13172 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 15 model components to the UV plane model.
! The established model now contains 66 components and 2.13172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104069Jy  sigma=0.001258
! Fit after  self-cal, rms=0.104033Jy  sigma=0.001257
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Uniform Weighting CLEAN ***"
! *** Finished Uniform Weighting CLEAN *** 
print "****************************************"
! **************************************** 
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7098 mas, bmaj=0.9625 mas, bpa=32.18 degrees
! Estimated noise=334.045 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.013747 Jy
! Component: 100  -  total flux cleaned = 0.022843 Jy
! Total flux subtracted in 100 components = 0.022843 Jy
! Clean residual min=-0.003061 max=0.005763 Jy/beam
! Clean residual mean=0.000087 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 2.15457 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 82 components and 2.15457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102708Jy  sigma=0.001213
! Fit after  self-cal, rms=0.102569Jy  sigma=0.001212
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00722403 Jy
! Component: 100  -  total flux cleaned = 0.0122189 Jy
! Total flux subtracted in 100 components = 0.0122189 Jy
! Clean residual min=-0.002711 max=0.005378 Jy/beam
! Clean residual mean=0.000057 rms=0.000806 Jy/beam
! Combined flux in latest and established models = 2.16679 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 35 model components to the UV plane model.
! The established model now contains 94 components and 2.16679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102206Jy  sigma=0.001199
! Fit after  self-cal, rms=0.102142Jy  sigma=0.001198
! Inverting map 
! Added new window around map position (-2.5, 4.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00597284 Jy
! Component: 100  -  total flux cleaned = 0.0100965 Jy
! Total flux subtracted in 100 components = 0.0100965 Jy
! Clean residual min=-0.002584 max=0.003800 Jy/beam
! Clean residual mean=0.000035 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 2.17688 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 26 model components to the UV plane model.
! The established model now contains 112 components and 2.17688 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101862Jy  sigma=0.001190
! Fit after  self-cal, rms=0.101815Jy  sigma=0.001189
! Inverting map 
! Added new window around map position (-3, 3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00465029 Jy
! Component: 100  -  total flux cleaned = 0.00781205 Jy
! Total flux subtracted in 100 components = 0.00781205 Jy
! Clean residual min=-0.002454 max=0.002933 Jy/beam
! Clean residual mean=0.000019 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 2.18469 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 128 components and 2.18469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101632Jy  sigma=0.001184
! Fit after  self-cal, rms=0.101598Jy  sigma=0.001184
! Inverting map 
print "****************************************"
! **************************************** 
print "*** Finished Natural Weighting CLEAN ***"
! *** Finished Natural Weighting CLEAN *** 
print "****************************************"
! **************************************** 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.01     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00*    KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00*    
!   MK        1.00     NL        1.00     NY        1.01     ON        1.01     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.00*    FD        0.00*    GC        0.00*    HN        0.00*    
!   KK        0.00*    KP        0.00*    LA        0.00*    MC        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.01     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00*    KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00*    
!   MK        1.00     NL        1.00     NY        1.01     ON        1.01     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.00*    FD        0.00*    GC        0.00*    HN        0.00*    
!   KK        0.00*    KP        0.00*    LA        0.00*    MC        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.01     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00*    
!   MK        1.00     NL        1.00     NY        1.01     ON        1.02     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.01     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.00*    FD        0.00*    GC        0.00*    HN        0.00*    
!   KK        0.00*    KP        0.00*    LA        0.00*    MC        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.01     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00     
!   MK        1.00     NL        1.00     NY        1.00     ON        1.00     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        1.00     GC        1.00     HN        1.00     
!   KK        1.00     KP        1.00     LA        1.00     MC        1.00*    
!   MK        1.00     NL        1.00     NY        1.01     ON        1.01     
!   OV        1.00     PT        1.00     SC        1.00     WF        1.00     
!   WZ        1.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.00*    FD        0.00*    GC        0.00*    HN        0.00*    
!   KK        0.00*    KP        0.00*    LA        0.00*    MC        0.00*    
!   MK        0.00*    NL        0.00*    NY        0.00*    ON        0.00*    
!   OV        0.00*    PT        0.00*    SC        0.00*    WF        0.00*    
!   WZ        0.00*    
! 
! 
! Fit before self-cal, rms=0.101598Jy  sigma=0.001184
! Fit after  self-cal, rms=0.101587Jy  sigma=0.001181
dynam = dynam - 0.5
doamp = false
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7114 mas, bmaj=0.9626 mas, bpa=32.09 degrees
! Estimated noise=334.074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00103076 Jy
! Component: 100  -  total flux cleaned = 0.000108391 Jy
! Total flux subtracted in 100 components = 0.000108391 Jy
! Clean residual min=-0.002364 max=0.002558 Jy/beam
! Clean residual mean=0.000014 rms=0.000554 Jy/beam
! Combined flux in latest and established models = 2.1848 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 19 model components to the UV plane model.
! The established model now contains 137 components and 2.1848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101434Jy  sigma=0.001178
! Fit after  self-cal, rms=0.101411Jy  sigma=0.001178
! Inverting map 
dynam = dynam - 1.0
doamp = true
solint = solint * (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.3, 1.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012297 Jy
! Component: 100  -  total flux cleaned = 0.00261544 Jy
! Total flux subtracted in 100 components = 0.00261544 Jy
! Clean residual min=-0.002372 max=0.002398 Jy/beam
! Clean residual mean=0.000009 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 2.18742 Jy
! Performing amp+phase self-cal over 1 minute time intervals
! Adding 24 model components to the UV plane model.
! The established model now contains 152 components and 2.18742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101329Jy  sigma=0.001177
! Fit after  self-cal, rms=0.101199Jy  sigma=0.001175
! Inverting map and beam 
! Estimated beam: bmin=0.7122 mas, bmaj=0.9626 mas, bpa=32.05 degrees
! Estimated noise=334.022 mJy/beam.
doamp = false
solint = solint / (6.0/3.6)
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal doamp, doflt, solint
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00183308 Jy
! Component: 100  -  total flux cleaned = -0.000914333 Jy
! Total flux subtracted in 100 components = -0.000914333 Jy
! Clean residual min=-0.002269 max=0.002360 Jy/beam
! Clean residual mean=0.000009 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 2.1865 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 22 model components to the UV plane model.
! The established model now contains 161 components and 2.1865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101089Jy  sigma=0.001173
! Fit after  self-cal, rms=0.101083Jy  sigma=0.001173
! Inverting map 
! Added new window around map position (-5.6, 7.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189073 Jy
! Component: 100  -  total flux cleaned = 0.00311799 Jy
! Total flux subtracted in 100 components = 0.00311799 Jy
! Clean residual min=-0.002266 max=0.002278 Jy/beam
! Clean residual mean=0.000002 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 2.18962 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 23 model components to the UV plane model.
! The established model now contains 173 components and 2.18962 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101025Jy  sigma=0.001172
! Fit after  self-cal, rms=0.101023Jy  sigma=0.001172
! Inverting map 
! Added new window around map position (15.5, -13.1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168283 Jy
! Component: 100  -  total flux cleaned = 0.00257616 Jy
! Total flux subtracted in 100 components = 0.00257616 Jy
! Clean residual min=-0.002243 max=0.002168 Jy/beam
! Clean residual mean=-0.000006 rms=0.000486 Jy/beam
! Combined flux in latest and established models = 2.1922 Jy
! Performing phase self-cal over 0.6 minute time intervals
! Adding 29 model components to the UV plane model.
! The established model now contains 182 components and 2.1922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100967Jy  sigma=0.001171
! Fit after  self-cal, rms=0.100964Jy  sigma=0.001171
! Inverting map 
print "***********************************"
! *********************************** 
print "*** Finished Amplitude Self-Cal ***"
! *** Finished Amplitude Self-Cal *** 
print "***********************************"
! *********************************** 
save 0133+476_X
! Writing UV FITS file: 0133+476_X.uvf
! Writing 182 model components to file: 0133+476_X.mod
! wwins: Wrote 10 windows to 0133+476_X.win
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7122 x 0.9626 at 32.05 degrees (North through East)
! Clean map  min=-0.0021016  max=1.8221 Jy/beam
! Writing clean map to FITS file: 0133+476_X.fits
! Writing difmap environment to: 0133+476_X.par
print "****************************"
! **************************** 
print "*** Now, make some plots ***"
! *** Now, make some plots *** 
print "****************************"
! **************************** 
![@gonzo_plot 0133+476_X]
device 0133+476_Xuv.ps/vps,1,2
! Attempting to open device: '0133+476_Xuv.ps/vps'
radplot
! Using default options string "m1"
uvplot
! Using default options string ""
device 0133+476_Xim.ps/vps
! Attempting to open device: '0133+476_Xim.ps/vps'
uvweight 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
loglevs -1,2048,2
! The new contour levels are:
!  -1 1 2 4 8 16 32 64 128 256 512 1024 2048
cmul = imstat(rms)*3
! Inverting map and beam 
! Estimated beam: bmin=0.7122 mas, bmaj=0.9626 mas, bpa=32.05 degrees
! Estimated noise=334.022 mJy/beam.
mappl cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7122 x 0.9626 at 32.05 degrees (North through East)
! Clean map  min=-0.0021016  max=1.8221 Jy/beam
![Exited script file: gonzo_plot]
![Exited script file: gonzo6-0.1]
quit
! Quitting program
! Log file 0133+476_X.log closed on Thu Feb 14 23:14:32 2008