! Started logfile: NGC1052_S.log on Thu Feb 7 20:11:20 2008 observe NGC1052_S.edt ! Reading UV FITS file: NGC1052_S.edt ! AN table 1: 42 integrations on 136 of 136 possible baselines. ! AN table 2: 31 integrations on 136 of 136 possible baselines. ! AN table 3: 33 integrations on 136 of 136 possible baselines. ! AN table 4: 34 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.0782038 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: NGC1052 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1259 lines of history. ! ! Reading 5956 visibilities. ![@gonzo5-0.4 NGC1052_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 564 telescope corrections were flagged in sub-array 1. ! A total of 422 telescope corrections were flagged in sub-array 2. ! A total of 561 telescope corrections were flagged in sub-array 3. ! A total of 478 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 566 telescope corrections were flagged in sub-array 1. ! A total of 411 telescope corrections were flagged in sub-array 2. ! A total of 561 telescope corrections were flagged in sub-array 3. ! A total of 478 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 571 telescope corrections were flagged in sub-array 1. ! A total of 415 telescope corrections were flagged in sub-array 2. ! A total of 561 telescope corrections were flagged in sub-array 3. ! A total of 478 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 568 telescope corrections were flagged in sub-array 1. ! A total of 411 telescope corrections were flagged in sub-array 2. ! A total of 561 telescope corrections were flagged in sub-array 3. ! A total of 477 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.426589Jy sigma=0.005377 ! Fit after self-cal, rms=0.418154Jy sigma=0.005276 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.787 mas, bmaj=6.622 mas, bpa=2.405 degrees ! Estimated noise=1671.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.523708 Jy ! Total flux subtracted in 50 components = 0.523708 Jy ! Clean residual min=-0.056057 max=0.206732 Jy/beam ! Clean residual mean=-0.000658 rms=0.020835 Jy/beam ! Combined flux in latest and established models = 0.523708 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.523708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.516876Jy sigma=0.007310 ! Fit after self-cal, rms=0.516904Jy sigma=0.007310 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230341 Jy ! Total flux subtracted in 50 components = 0.230341 Jy ! Clean residual min=-0.038560 max=0.117184 Jy/beam ! Clean residual mean=-0.000469 rms=0.013942 Jy/beam ! Combined flux in latest and established models = 0.754049 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 23 components and 0.754049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.356825Jy sigma=0.005043 ! Fit after self-cal, rms=0.356847Jy sigma=0.005043 ! Inverting map ! Added new window around map position (3.6, 1.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.139978 Jy ! Total flux subtracted in 50 components = 0.139978 Jy ! Clean residual min=-0.029328 max=0.083934 Jy/beam ! Clean residual mean=-0.000356 rms=0.010357 Jy/beam ! Combined flux in latest and established models = 0.894027 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.894027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270924Jy sigma=0.003781 ! Fit after self-cal, rms=0.270223Jy sigma=0.003778 ! Inverting map ! Added new window around map position (7.2, 4.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0992037 Jy ! Total flux subtracted in 50 components = 0.0992037 Jy ! Clean residual min=-0.024213 max=0.063749 Jy/beam ! Clean residual mean=-0.000275 rms=0.007920 Jy/beam ! Combined flux in latest and established models = 0.993231 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.993231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215260Jy sigma=0.002953 ! Fit after self-cal, rms=0.213878Jy sigma=0.002943 ! Inverting map ! Added new window around map position (-3.6, -2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0731988 Jy ! Total flux subtracted in 50 components = 0.0731988 Jy ! Clean residual min=-0.019299 max=0.040361 Jy/beam ! Clean residual mean=-0.000215 rms=0.006168 Jy/beam ! Combined flux in latest and established models = 1.06643 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 56 components and 1.06643 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.176114Jy sigma=0.002362 ! Fit after self-cal, rms=0.175550Jy sigma=0.002359 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0529992 Jy ! Total flux subtracted in 50 components = 0.0529992 Jy ! Clean residual min=-0.016495 max=0.029940 Jy/beam ! Clean residual mean=-0.000172 rms=0.005036 Jy/beam ! Combined flux in latest and established models = 1.11943 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 66 components and 1.11943 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151127Jy sigma=0.001969 ! Fit after self-cal, rms=0.150673Jy sigma=0.001966 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397046 Jy ! Total flux subtracted in 50 components = 0.0397046 Jy ! Clean residual min=-0.014622 max=0.022539 Jy/beam ! Clean residual mean=-0.000140 rms=0.004266 Jy/beam ! Combined flux in latest and established models = 1.15913 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 84 components and 1.15913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134886Jy sigma=0.001704 ! Fit after self-cal, rms=0.134478Jy sigma=0.001701 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0303829 Jy ! Total flux subtracted in 50 components = 0.0303829 Jy ! Clean residual min=-0.013670 max=0.018117 Jy/beam ! Clean residual mean=-0.000115 rms=0.003733 Jy/beam ! Combined flux in latest and established models = 1.18952 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 94 components and 1.18952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124284Jy sigma=0.001525 ! Fit after self-cal, rms=0.123971Jy sigma=0.001523 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0235468 Jy ! Total flux subtracted in 50 components = 0.0235468 Jy ! Clean residual min=-0.013017 max=0.017682 Jy/beam ! Clean residual mean=-0.000096 rms=0.003374 Jy/beam ! Combined flux in latest and established models = 1.21306 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 105 components and 1.21306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117444Jy sigma=0.001407 ! Fit after self-cal, rms=0.117227Jy sigma=0.001406 ! Inverting map ! Added new window around map position (-17.2, -7.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0199757 Jy ! Total flux subtracted in 50 components = 0.0199757 Jy ! Clean residual min=-0.012577 max=0.011998 Jy/beam ! Clean residual mean=-0.000082 rms=0.003089 Jy/beam ! Combined flux in latest and established models = 1.23304 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 1.23304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112861Jy sigma=0.001328 ! Fit after self-cal, rms=0.112663Jy sigma=0.001327 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.113 mas, bmaj=8.495 mas, bpa=1.919 degrees ! Estimated noise=920.445 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332757 Jy ! Component: 100 - total flux cleaned = 0.0538881 Jy ! Total flux subtracted in 100 components = 0.0538881 Jy ! Clean residual min=-0.009212 max=0.011164 Jy/beam ! Clean residual mean=-0.000224 rms=0.002923 Jy/beam ! Combined flux in latest and established models = 1.28693 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 52 model components to the UV plane model. ! The established model now contains 165 components and 1.28693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104143Jy sigma=0.001173 ! Fit after self-cal, rms=0.103847Jy sigma=0.001170 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 0.99 HN 0.99 ! KK 0.99 KP 0.99 LA 0.98 MC 1.00* ! MK 0.98 NL 1.00 NY 1.00* ON 1.00* ! OV 0.99 PT 0.99 SC 1.01 WF 1.00 ! WZ 1.00* ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 GC 1.00* HN 1.00* ! KK 1.00* KP 0.98 LA 0.99 MC 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 0.98 SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.99 GC 1.00* HN 0.99 ! KK 1.00* KP 1.00 LA 0.99 MC 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.00 WF 1.01 ! WZ 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 0.98 HN 1.00 ! KK 0.99 KP 0.99 LA 0.99 MC 1.00* ! MK 0.99 NL 1.01 NY 1.00* ON 1.00* ! OV 0.99 PT 0.98 SC 1.04 WF 0.99 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 GC 1.00* HN 1.00* ! KK 1.00* KP 0.99 LA 0.99 MC 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 0.99 SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.99 GC 1.00* HN 0.99 ! KK 1.00* KP 1.00 LA 0.99 MC 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.03 WF 0.99 ! WZ 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 GC 0.99 HN 1.00 ! KK 0.98 KP 0.99 LA 0.99 MC 1.00* ! MK 1.00 NL 1.01 NY 1.00* ON 1.00* ! OV 0.99 PT 0.98 SC 1.03 WF 1.01 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 GC 1.00* HN 1.00* ! KK 1.00* KP 0.99 LA 1.00 MC 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 0.99 SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.99 GC 1.00* HN 0.99 ! KK 1.00* KP 0.99 LA 0.99 MC 1.00* ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 0.99 PT 0.99 SC 1.01 WF 1.01 ! WZ 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 0.98 HN 1.00 ! KK 0.98 KP 0.99 LA 0.99 MC 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 0.98 PT 1.00 SC 1.02 WF 1.02 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00* FD 0.99 GC 1.00* HN 1.00* ! KK 1.00* KP 0.99 LA 1.00 MC 1.00* ! MK 1.00* NL 1.00* NY 1.00* ON 1.00* ! OV 1.00* PT 0.99 SC 1.00* WF 1.00* ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.99 GC 1.00* HN 1.00 ! KK 1.00* KP 1.00 LA 0.99 MC 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.01 WF 1.01 ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.103847Jy sigma=0.001170 ! Fit after self-cal, rms=0.101805Jy sigma=0.001146 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.116 mas, bmaj=8.599 mas, bpa=1.634 degrees ! Estimated noise=912.128 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00922985 Jy ! Component: 100 - total flux cleaned = 0.0127493 Jy ! Total flux subtracted in 100 components = 0.0127493 Jy ! Clean residual min=-0.006030 max=0.006595 Jy/beam ! Clean residual mean=-0.000112 rms=0.001774 Jy/beam ! Combined flux in latest and established models = 1.29968 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 181 components and 1.29968 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101063Jy sigma=0.001134 ! Fit after self-cal, rms=0.100984Jy sigma=0.001133 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-25.2, 62.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00553857 Jy ! Component: 100 - total flux cleaned = 0.00749706 Jy ! Total flux subtracted in 100 components = 0.00749706 Jy ! Clean residual min=-0.005438 max=0.006140 Jy/beam ! Clean residual mean=-0.000100 rms=0.001635 Jy/beam ! Combined flux in latest and established models = 1.30717 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 192 components and 1.30717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100546Jy sigma=0.001128 ! Fit after self-cal, rms=0.099648Jy sigma=0.001118 ! Inverting map and beam ! Estimated beam: bmin=4.121 mas, bmaj=8.599 mas, bpa=1.637 degrees ! Estimated noise=912.753 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0055566 Jy ! Component: 100 - total flux cleaned = 0.00756316 Jy ! Total flux subtracted in 100 components = 0.00756316 Jy ! Clean residual min=-0.005385 max=0.005569 Jy/beam ! Clean residual mean=-0.000091 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 1.31474 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 220 components and 1.31474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099329Jy sigma=0.001113 ! Fit after self-cal, rms=0.099310Jy sigma=0.001113 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save NGC1052_S ! Writing UV FITS file: NGC1052_S.uvf ! Writing 220 model components to file: NGC1052_S.mod ! wwins: Wrote 6 windows to NGC1052_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.121 x 8.599 at 1.637 degrees (North through East) ! Clean map min=-0.0053874 max=0.76482 Jy/beam ! Writing clean map to FITS file: NGC1052_S.fits ! Writing difmap environment to: NGC1052_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot NGC1052_S] device NGC1052_Suv.ps/vps,1,2 ! Attempting to open device: 'NGC1052_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device NGC1052_Sim.ps/vps ! Attempting to open device: 'NGC1052_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=4.121 mas, bmaj=8.599 mas, bpa=1.637 degrees ! Estimated noise=912.753 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.121 x 8.599 at 1.637 degrees (North through East) ! Clean map min=-0.0053874 max=0.76482 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file NGC1052_S.log closed on Thu Feb 7 20:11:29 2008