! Started logfile: CTA26_S.log on Thu Feb 7 20:01:51 2008 observe CTA26_S.edt ! Reading UV FITS file: CTA26_S.edt ! AN table 1: 66 integrations on 136 of 136 possible baselines. ! AN table 2: 60 integrations on 136 of 136 possible baselines. ! AN table 3: 15 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.143826 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: CTA26 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1259 lines of history. ! ! Reading 11032 visibilities. ![@gonzo5-0.4 CTA26_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 713 telescope corrections were flagged in sub-array 1. ! A total of 1020 telescope corrections were flagged in sub-array 2. ! A total of 186 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 716 telescope corrections were flagged in sub-array 1. ! A total of 1020 telescope corrections were flagged in sub-array 2. ! A total of 185 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 728 telescope corrections were flagged in sub-array 1. ! A total of 1020 telescope corrections were flagged in sub-array 2. ! A total of 185 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 731 telescope corrections were flagged in sub-array 1. ! A total of 1020 telescope corrections were flagged in sub-array 2. ! A total of 190 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=0.858060Jy sigma=0.011856 ! Fit after self-cal, rms=0.854702Jy sigma=0.011829 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.444 mas, bmaj=6.135 mas, bpa=-5.674 degrees ! Estimated noise=1125.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.26916 Jy ! Total flux subtracted in 50 components = 1.26916 Jy ! Clean residual min=-0.108374 max=0.422317 Jy/beam ! Clean residual mean=0.000231 rms=0.026193 Jy/beam ! Combined flux in latest and established models = 1.26916 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 1.26916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.644642Jy sigma=0.008968 ! Fit after self-cal, rms=0.644723Jy sigma=0.008967 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.438581 Jy ! Total flux subtracted in 50 components = 0.438581 Jy ! Clean residual min=-0.043147 max=0.190053 Jy/beam ! Clean residual mean=0.000122 rms=0.013046 Jy/beam ! Combined flux in latest and established models = 1.70774 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 6 model components to the UV plane model. ! The established model now contains 9 components and 1.70774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.331401Jy sigma=0.004657 ! Fit after self-cal, rms=0.329360Jy sigma=0.004639 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.203338 Jy ! Total flux subtracted in 50 components = 0.203338 Jy ! Clean residual min=-0.024220 max=0.089804 Jy/beam ! Clean residual mean=0.000072 rms=0.007368 Jy/beam ! Combined flux in latest and established models = 1.91108 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 1.91108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.203141Jy sigma=0.002835 ! Fit after self-cal, rms=0.202197Jy sigma=0.002826 ! Inverting map ! Added new window around map position (2.4, 1.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.103758 Jy ! Total flux subtracted in 50 components = 0.103758 Jy ! Clean residual min=-0.016128 max=0.051110 Jy/beam ! Clean residual mean=0.000046 rms=0.004858 Jy/beam ! Combined flux in latest and established models = 2.01483 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 2.01483 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152629Jy sigma=0.002056 ! Fit after self-cal, rms=0.152091Jy sigma=0.002050 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0623104 Jy ! Total flux subtracted in 50 components = 0.0623104 Jy ! Clean residual min=-0.011980 max=0.032424 Jy/beam ! Clean residual mean=0.000031 rms=0.003548 Jy/beam ! Combined flux in latest and established models = 2.07714 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 35 components and 2.07714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130043Jy sigma=0.001673 ! Fit after self-cal, rms=0.129856Jy sigma=0.001670 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0407023 Jy ! Total flux subtracted in 50 components = 0.0407023 Jy ! Clean residual min=-0.010383 max=0.021786 Jy/beam ! Clean residual mean=0.000021 rms=0.002820 Jy/beam ! Combined flux in latest and established models = 2.11785 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 2.11785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119372Jy sigma=0.001475 ! Fit after self-cal, rms=0.119234Jy sigma=0.001473 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279806 Jy ! Total flux subtracted in 50 components = 0.0279806 Jy ! Clean residual min=-0.009725 max=0.015644 Jy/beam ! Clean residual mean=0.000014 rms=0.002400 Jy/beam ! Combined flux in latest and established models = 2.14583 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 55 components and 2.14583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114039Jy sigma=0.001369 ! Fit after self-cal, rms=0.113904Jy sigma=0.001368 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204062 Jy ! Total flux subtracted in 50 components = 0.0204062 Jy ! Clean residual min=-0.008978 max=0.013348 Jy/beam ! Clean residual mean=0.000009 rms=0.002144 Jy/beam ! Combined flux in latest and established models = 2.16623 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 59 components and 2.16623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111068Jy sigma=0.001308 ! Fit after self-cal, rms=0.110978Jy sigma=0.001307 ! Inverting map ! Added new window around map position (-4.8, -4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0157545 Jy ! Total flux subtracted in 50 components = 0.0157545 Jy ! Clean residual min=-0.008319 max=0.011213 Jy/beam ! Clean residual mean=0.000005 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 2.18199 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 2.18199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109346Jy sigma=0.001272 ! Fit after self-cal, rms=0.109336Jy sigma=0.001271 ! Inverting map ! Added new window around map position (6, 6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128796 Jy ! Total flux subtracted in 50 components = 0.0128796 Jy ! Clean residual min=-0.007826 max=0.007930 Jy/beam ! Clean residual mean=0.000002 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 2.19487 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 2.19487 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108127Jy sigma=0.001246 ! Fit after self-cal, rms=0.108088Jy sigma=0.001246 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.965 mas, bmaj=6.846 mas, bpa=-4.253 degrees ! Estimated noise=635.193 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0146241 Jy ! Component: 100 - total flux cleaned = 0.0246038 Jy ! Total flux subtracted in 100 components = 0.0246038 Jy ! Clean residual min=-0.004753 max=0.006710 Jy/beam ! Clean residual mean=0.000028 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 2.21947 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 111 components and 2.21947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106409Jy sigma=0.001212 ! Fit after self-cal, rms=0.106308Jy sigma=0.001211 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00789201 Jy ! Component: 100 - total flux cleaned = 0.0136777 Jy ! Total flux subtracted in 100 components = 0.0136777 Jy ! Clean residual min=-0.004396 max=0.005495 Jy/beam ! Clean residual mean=0.000018 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 2.23315 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 126 components and 2.23315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105781Jy sigma=0.001201 ! Fit after self-cal, rms=0.105752Jy sigma=0.001201 ! Inverting map ! Added new window around map position (10, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555586 Jy ! Component: 100 - total flux cleaned = 0.00949773 Jy ! Total flux subtracted in 100 components = 0.00949773 Jy ! Clean residual min=-0.004089 max=0.003777 Jy/beam ! Clean residual mean=0.000011 rms=0.001026 Jy/beam ! Combined flux in latest and established models = 2.24265 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 140 components and 2.24265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105468Jy sigma=0.001196 ! Fit after self-cal, rms=0.105449Jy sigma=0.001196 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.01 ! MK 0.99 NL 1.00 NY 1.00* ON 0.99 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.01 KP 1.00 LA 1.00 MC 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.00 WF 1.00 ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.02 ! MK 1.00 NL 1.00 NY 1.00* ON 1.02 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.01 KP 1.00 LA 1.00 MC 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.01 WF 1.01 ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 0.99 KP 1.00 LA 1.00 MC 1.03 ! MK 0.99 NL 1.00 NY 1.00* ON 0.95 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00* ! MK 0.99 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.01 WF 1.00 ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 0.99 KP 1.00 LA 1.00 MC 1.00* ! MK 0.99 NL 1.00 NY 1.00* ON 1.02 ! OV 1.00 PT 1.00 SC 1.01 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* GC 0.00* HN 0.00* ! KK 0.00* KP 0.00* LA 0.00* MC 0.00* ! MK 0.00* NL 0.00* NY 0.00* ON 0.00* ! OV 0.00* PT 0.00* SC 0.00* WF 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.01 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00* SC 1.01 WF 0.99 ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.105449Jy sigma=0.001196 ! Fit after self-cal, rms=0.105154Jy sigma=0.001191 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=6.848 mas, bpa=-4.306 degrees ! Estimated noise=634.683 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183855 Jy ! Component: 100 - total flux cleaned = 0.00331691 Jy ! Total flux subtracted in 100 components = 0.00331691 Jy ! Clean residual min=-0.003615 max=0.003325 Jy/beam ! Clean residual mean=0.000003 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 2.24596 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 151 components and 2.24596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105040Jy sigma=0.001189 ! Fit after self-cal, rms=0.105034Jy sigma=0.001189 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111989 Jy ! Component: 100 - total flux cleaned = 0.00194293 Jy ! Total flux subtracted in 100 components = 0.00194293 Jy ! Clean residual min=-0.003539 max=0.003349 Jy/beam ! Clean residual mean=0.000002 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 2.24791 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 157 components and 2.24791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104979Jy sigma=0.001188 ! Fit after self-cal, rms=0.104276Jy sigma=0.001178 ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=6.848 mas, bpa=-4.313 degrees ! Estimated noise=635.074 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159486 Jy ! Component: 100 - total flux cleaned = 0.00172003 Jy ! Total flux subtracted in 100 components = 0.00172003 Jy ! Clean residual min=-0.003531 max=0.003258 Jy/beam ! Clean residual mean=0.000003 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 2.24963 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 169 components and 2.24962 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104229Jy sigma=0.001177 ! Fit after self-cal, rms=0.104232Jy sigma=0.001177 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save CTA26_S ! Writing UV FITS file: CTA26_S.uvf ! Writing 169 model components to file: CTA26_S.mod ! wwins: Wrote 5 windows to CTA26_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.966 x 6.848 at -4.313 degrees (North through East) ! Clean map min=-0.0034277 max=1.6916 Jy/beam ! Writing clean map to FITS file: CTA26_S.fits ! Writing difmap environment to: CTA26_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot CTA26_S] device CTA26_Suv.ps/vps,1,2 ! Attempting to open device: 'CTA26_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device CTA26_Sim.ps/vps ! Attempting to open device: 'CTA26_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=6.848 mas, bpa=-4.313 degrees ! Estimated noise=635.074 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.966 x 6.848 at -4.313 degrees (North through East) ! Clean map min=-0.0034277 max=1.6916 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file CTA26_S.log closed on Thu Feb 7 20:02:01 2008