! Started logfile: CTA102_S.log on Thu Feb 7 19:54:51 2008 observe CTA102_S.edt ! Reading UV FITS file: CTA102_S.edt ! AN table 1: 61 integrations on 136 of 136 possible baselines. ! AN table 2: 50 integrations on 136 of 136 possible baselines. ! AN table 3: 11 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.248554 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: CTA102 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1267 lines of history. ! ! Reading 16496 visibilities. ![@gonzo5-0.4 CTA102_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 686 telescope corrections were flagged in sub-array 1. ! A total of 589 telescope corrections were flagged in sub-array 2. ! A total of 114 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 682 telescope corrections were flagged in sub-array 1. ! A total of 588 telescope corrections were flagged in sub-array 2. ! A total of 115 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 683 telescope corrections were flagged in sub-array 1. ! A total of 590 telescope corrections were flagged in sub-array 2. ! A total of 115 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 681 telescope corrections were flagged in sub-array 1. ! A total of 593 telescope corrections were flagged in sub-array 2. ! A total of 115 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=2.421602Jy sigma=0.039211 ! Fit after self-cal, rms=2.413798Jy sigma=0.039147 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=6.742 mas, bpa=-9.692 degrees ! Estimated noise=1256.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.30766 Jy ! Total flux subtracted in 50 components = 2.30766 Jy ! Clean residual min=-0.259183 max=0.829763 Jy/beam ! Clean residual mean=-0.000728 rms=0.072459 Jy/beam ! Combined flux in latest and established models = 2.30766 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 2.30766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.398407Jy sigma=0.022849 ! Fit after self-cal, rms=1.398285Jy sigma=0.022847 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.844446 Jy ! Total flux subtracted in 50 components = 0.844446 Jy ! Clean residual min=-0.155423 max=0.376389 Jy/beam ! Clean residual mean=-0.000454 rms=0.041849 Jy/beam ! Combined flux in latest and established models = 3.1521 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 3.1521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.854477Jy sigma=0.013815 ! Fit after self-cal, rms=0.853636Jy sigma=0.013803 ! Inverting map ! Added new window around map position (-2, 6.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.4243 Jy ! Total flux subtracted in 50 components = 0.4243 Jy ! Clean residual min=-0.115779 max=0.204220 Jy/beam ! Clean residual mean=-0.000318 rms=0.029800 Jy/beam ! Combined flux in latest and established models = 3.5764 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 3.5764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.635515Jy sigma=0.010152 ! Fit after self-cal, rms=0.634668Jy sigma=0.010134 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249502 Jy ! Total flux subtracted in 50 components = 0.249502 Jy ! Clean residual min=-0.089979 max=0.172271 Jy/beam ! Clean residual mean=-0.000242 rms=0.024490 Jy/beam ! Combined flux in latest and established models = 3.8259 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 54 components and 3.8259 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534566Jy sigma=0.008452 ! Fit after self-cal, rms=0.532904Jy sigma=0.008422 ! Inverting map ! Added new window around map position (6, -7.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196389 Jy ! Total flux subtracted in 50 components = 0.196389 Jy ! Clean residual min=-0.083257 max=0.110742 Jy/beam ! Clean residual mean=-0.000199 rms=0.020706 Jy/beam ! Combined flux in latest and established models = 4.02229 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 65 components and 4.02229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454917Jy sigma=0.007087 ! Fit after self-cal, rms=0.451606Jy sigma=0.007062 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147585 Jy ! Total flux subtracted in 50 components = 0.147585 Jy ! Clean residual min=-0.073769 max=0.098800 Jy/beam ! Clean residual mean=-0.000165 rms=0.018050 Jy/beam ! Combined flux in latest and established models = 4.16988 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 76 components and 4.16988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.399770Jy sigma=0.006174 ! Fit after self-cal, rms=0.398377Jy sigma=0.006163 ! Inverting map ! Added new window around map position (10, -12.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.123408 Jy ! Total flux subtracted in 50 components = 0.123408 Jy ! Clean residual min=-0.068329 max=0.079688 Jy/beam ! Clean residual mean=-0.000143 rms=0.016047 Jy/beam ! Combined flux in latest and established models = 4.29329 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 4.29329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358949Jy sigma=0.005471 ! Fit after self-cal, rms=0.357495Jy sigma=0.005460 ! Inverting map ! Added new window around map position (2.8, -2.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10494 Jy ! Total flux subtracted in 50 components = 0.10494 Jy ! Clean residual min=-0.062424 max=0.061744 Jy/beam ! Clean residual mean=-0.000124 rms=0.014434 Jy/beam ! Combined flux in latest and established models = 4.39823 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 4.39823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.325346Jy sigma=0.004885 ! Fit after self-cal, rms=0.323703Jy sigma=0.004875 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.705 mas, bmaj=8.198 mas, bpa=-10.06 degrees ! Estimated noise=536.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.152197 Jy ! Component: 100 - total flux cleaned = 0.251444 Jy ! Total flux subtracted in 100 components = 0.251444 Jy ! Clean residual min=-0.045195 max=0.074192 Jy/beam ! Clean residual mean=-0.000184 rms=0.015446 Jy/beam ! Combined flux in latest and established models = 4.64967 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 117 components and 4.64967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.256674Jy sigma=0.003600 ! Fit after self-cal, rms=0.247684Jy sigma=0.003487 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0873386 Jy ! Component: 100 - total flux cleaned = 0.144719 Jy ! Total flux subtracted in 100 components = 0.144719 Jy ! Clean residual min=-0.034252 max=0.052566 Jy/beam ! Clean residual mean=-0.000107 rms=0.010349 Jy/beam ! Combined flux in latest and established models = 4.79439 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 37 model components to the UV plane model. ! The established model now contains 143 components and 4.79439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.218209Jy sigma=0.002955 ! Fit after self-cal, rms=0.213413Jy sigma=0.002888 ! Inverting map ! Added new window around map position (-52.4, 72). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0583944 Jy ! Component: 100 - total flux cleaned = 0.0960214 Jy ! Total flux subtracted in 100 components = 0.0960214 Jy ! Clean residual min=-0.029780 max=0.035026 Jy/beam ! Clean residual mean=-0.000053 rms=0.007675 Jy/beam ! Combined flux in latest and established models = 4.89041 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 167 components and 4.89041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197915Jy sigma=0.002623 ! Fit after self-cal, rms=0.195526Jy sigma=0.002586 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 1.00* HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.04 ! MK 1.00* NL 1.00 NY 1.03 ON 1.03 ! OV 1.00 PT 1.00 SC 1.03 WF 1.00 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.02 HN 1.01 ! KK 1.00* KP 0.99 LA 1.00 MC 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* WF 1.01 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 GC 1.03 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* WF 1.00 ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 1.00* HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.05 ! MK 1.00* NL 1.00 NY 1.03 ON 1.03 ! OV 1.00 PT 1.00 SC 1.03 WF 1.00 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.02 HN 1.01 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00* ! MK 1.00 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* WF 1.01 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 GC 1.03 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* WF 1.00 ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 1.00* HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.01 ! MK 1.00* NL 1.00 NY 1.03 ON 1.04 ! OV 1.00 PT 1.00 SC 1.02 WF 1.00 ! WZ 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 GC 1.00 HN 1.01 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00* ! MK 1.01 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* WF 1.01 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.00 GC 1.02 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00* ! MK 1.00* NL 0.99 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* WF 1.00 ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 GC 1.00* HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.01 ! MK 1.00* NL 1.00 NY 1.03 ON 1.03 ! OV 1.00 PT 1.00 SC 1.02 WF 1.00 ! WZ 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 GC 0.99 HN 1.01 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00* ! MK 1.01 NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 0.99 SC 1.03 WF 1.01 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 1.00 GC 1.03 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00* ! MK 1.00* NL 1.00 NY 1.00* ON 1.00* ! OV 1.00 PT 1.00 SC 1.00* WF 1.00 ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.195526Jy sigma=0.002586 ! Fit after self-cal, rms=0.193932Jy sigma=0.002554 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.724 mas, bmaj=8.25 mas, bpa=-10.09 degrees ! Estimated noise=538.354 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143577 Jy ! Component: 100 - total flux cleaned = 0.0154005 Jy ! Total flux subtracted in 100 components = 0.0154005 Jy ! Clean residual min=-0.029440 max=0.026481 Jy/beam ! Clean residual mean=-0.000030 rms=0.006587 Jy/beam ! Combined flux in latest and established models = 4.90581 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 184 components and 4.90581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.188603Jy sigma=0.002454 ! Fit after self-cal, rms=0.187344Jy sigma=0.002440 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00678461 Jy ! Component: 100 - total flux cleaned = 0.0059678 Jy ! Total flux subtracted in 100 components = 0.0059678 Jy ! Clean residual min=-0.030380 max=0.024532 Jy/beam ! Clean residual mean=-0.000025 rms=0.006179 Jy/beam ! Combined flux in latest and established models = 4.91178 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 191 components and 4.91178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183924Jy sigma=0.002381 ! Fit after self-cal, rms=0.181601Jy sigma=0.002341 ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=8.271 mas, bpa=-10.11 degrees ! Estimated noise=539.009 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144322 Jy ! Component: 100 - total flux cleaned = 0.0144439 Jy ! Total flux subtracted in 100 components = 0.0144439 Jy ! Clean residual min=-0.026149 max=0.024230 Jy/beam ! Clean residual mean=-0.000023 rms=0.005724 Jy/beam ! Combined flux in latest and established models = 4.92622 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 195 components and 4.92622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178314Jy sigma=0.002290 ! Fit after self-cal, rms=0.177461Jy sigma=0.002281 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save CTA102_S ! Writing UV FITS file: CTA102_S.uvf ! Writing 195 model components to file: CTA102_S.mod ! wwins: Wrote 6 windows to CTA102_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.725 x 8.271 at -10.11 degrees (North through East) ! Clean map min=-0.030098 max=2.8086 Jy/beam ! Writing clean map to FITS file: CTA102_S.fits ! Writing difmap environment to: CTA102_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot CTA102_S] device CTA102_Suv.ps/vps,1,2 ! Attempting to open device: 'CTA102_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device CTA102_Sim.ps/vps ! Attempting to open device: 'CTA102_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=8.271 mas, bpa=-10.11 degrees ! Estimated noise=539.009 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.725 x 8.271 at -10.11 degrees (North through East) ! Clean map min=-0.030098 max=2.8086 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file CTA102_S.log closed on Thu Feb 7 19:55:00 2008