! Started logfile: 1803+784_S.log on Thu Feb 7 17:06:28 2008 observe 1803+784_S.edt ! Reading UV FITS file: 1803+784_S.edt ! AN table 1: 13 integrations on 136 of 136 possible baselines. ! AN table 2: 222 integrations on 136 of 136 possible baselines. ! AN table 3: 58 integrations on 136 of 136 possible baselines. ! AN table 4: 20 integrations on 136 of 136 possible baselines. ! AN table 5: 38 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.329877 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 1803+784 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1287 lines of history. ! ! Reading 62988 visibilities. ![@gonzo5-0.4 1803+784_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 5.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 2247 telescope corrections were flagged in sub-array 2. ! A total of 350 telescope corrections were flagged in sub-array 3. ! A total of 187 telescope corrections were flagged in sub-array 4. ! A total of 560 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 2247 telescope corrections were flagged in sub-array 2. ! A total of 351 telescope corrections were flagged in sub-array 3. ! A total of 189 telescope corrections were flagged in sub-array 4. ! A total of 560 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 2247 telescope corrections were flagged in sub-array 2. ! A total of 351 telescope corrections were flagged in sub-array 3. ! A total of 187 telescope corrections were flagged in sub-array 4. ! A total of 560 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 114 telescope corrections were flagged in sub-array 1. ! A total of 2273 telescope corrections were flagged in sub-array 2. ! A total of 350 telescope corrections were flagged in sub-array 3. ! A total of 187 telescope corrections were flagged in sub-array 4. ! A total of 564 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=0.854337Jy sigma=0.012996 ! Fit after self-cal, rms=0.851400Jy sigma=0.012956 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.074 mas, bmaj=2.371 mas, bpa=-39.33 degrees ! Estimated noise=574.541 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.29113 Jy ! Total flux subtracted in 50 components = 1.29113 Jy ! Clean residual min=-0.041517 max=0.364012 Jy/beam ! Clean residual mean=-0.000505 rms=0.010057 Jy/beam ! Combined flux in latest and established models = 1.29113 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 1.29113 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.591412Jy sigma=0.009103 ! Fit after self-cal, rms=0.591325Jy sigma=0.009101 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.349316 Jy ! Total flux subtracted in 50 components = 0.349316 Jy ! Clean residual min=-0.020647 max=0.148634 Jy/beam ! Clean residual mean=-0.000289 rms=0.005055 Jy/beam ! Combined flux in latest and established models = 1.64045 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 6 components and 1.64045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324554Jy sigma=0.004986 ! Fit after self-cal, rms=0.323600Jy sigma=0.004982 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161459 Jy ! Total flux subtracted in 50 components = 0.161459 Jy ! Clean residual min=-0.010550 max=0.071646 Jy/beam ! Clean residual mean=-0.000190 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 1.80191 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 5 model components to the UV plane model. ! The established model now contains 9 components and 1.80191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.222430Jy sigma=0.003348 ! Fit after self-cal, rms=0.221196Jy sigma=0.003340 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0806247 Jy ! Total flux subtracted in 50 components = 0.0806247 Jy ! Clean residual min=-0.007781 max=0.036893 Jy/beam ! Clean residual mean=-0.000140 rms=0.002278 Jy/beam ! Combined flux in latest and established models = 1.88253 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 4 model components to the UV plane model. ! The established model now contains 9 components and 1.88253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182541Jy sigma=0.002671 ! Fit after self-cal, rms=0.182106Jy sigma=0.002668 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413991 Jy ! Total flux subtracted in 50 components = 0.0413991 Jy ! Clean residual min=-0.007360 max=0.030115 Jy/beam ! Clean residual mean=-0.000115 rms=0.002018 Jy/beam ! Combined flux in latest and established models = 1.92393 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 1.92393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168076Jy sigma=0.002405 ! Fit after self-cal, rms=0.167960Jy sigma=0.002404 ! Inverting map ! Added new window around map position (-4.4, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0324639 Jy ! Total flux subtracted in 50 components = 0.0324639 Jy ! Clean residual min=-0.006998 max=0.027453 Jy/beam ! Clean residual mean=-0.000096 rms=0.001853 Jy/beam ! Combined flux in latest and established models = 1.9564 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 27 components and 1.9564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158093Jy sigma=0.002215 ! Fit after self-cal, rms=0.157522Jy sigma=0.002211 ! Inverting map ! Added new window around map position (-8, -1.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0279497 Jy ! Total flux subtracted in 50 components = 0.0279497 Jy ! Clean residual min=-0.006399 max=0.015490 Jy/beam ! Clean residual mean=-0.000080 rms=0.001682 Jy/beam ! Combined flux in latest and established models = 1.98435 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 1.98435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149833Jy sigma=0.002062 ! Fit after self-cal, rms=0.149438Jy sigma=0.002060 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217046 Jy ! Total flux subtracted in 50 components = 0.0217046 Jy ! Clean residual min=-0.005991 max=0.013190 Jy/beam ! Clean residual mean=-0.000068 rms=0.001569 Jy/beam ! Combined flux in latest and established models = 2.00605 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 40 components and 2.00605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144321Jy sigma=0.001958 ! Fit after self-cal, rms=0.144057Jy sigma=0.001957 ! Inverting map ! Added new window around map position (-2.4, -1.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183403 Jy ! Total flux subtracted in 50 components = 0.0183403 Jy ! Clean residual min=-0.005721 max=0.012734 Jy/beam ! Clean residual mean=-0.000057 rms=0.001484 Jy/beam ! Combined flux in latest and established models = 2.02439 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 2.02439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140278Jy sigma=0.001881 ! Fit after self-cal, rms=0.140068Jy sigma=0.001880 ! Inverting map ! Added new window around map position (-26, -3.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162441 Jy ! Total flux subtracted in 50 components = 0.0162441 Jy ! Clean residual min=-0.005460 max=0.010981 Jy/beam ! Clean residual mean=-0.000050 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 2.04063 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 54 components and 2.04063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136957Jy sigma=0.001816 ! Fit after self-cal, rms=0.136790Jy sigma=0.001816 ! Inverting map ! Added new window around map position (-24.4, -6.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143728 Jy ! Total flux subtracted in 50 components = 0.0143728 Jy ! Clean residual min=-0.005278 max=0.008918 Jy/beam ! Clean residual mean=-0.000045 rms=0.001348 Jy/beam ! Combined flux in latest and established models = 2.05501 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 60 components and 2.05501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134239Jy sigma=0.001763 ! Fit after self-cal, rms=0.134109Jy sigma=0.001762 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0128064 Jy ! Total flux subtracted in 50 components = 0.0128064 Jy ! Clean residual min=-0.005100 max=0.008770 Jy/beam ! Clean residual mean=-0.000039 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 2.06781 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 66 components and 2.06781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132011Jy sigma=0.001719 ! Fit after self-cal, rms=0.131901Jy sigma=0.001718 ! Inverting map ! Added new window around map position (-27.6, -7.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116606 Jy ! Total flux subtracted in 50 components = 0.0116606 Jy ! Clean residual min=-0.004972 max=0.008542 Jy/beam ! Clean residual mean=-0.000035 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 2.07947 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 2.07948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130115Jy sigma=0.001680 ! Fit after self-cal, rms=0.130016Jy sigma=0.001680 ! Inverting map ! Added new window around map position (-28.4, -11.2). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.010792 Jy ! Total flux subtracted in 50 components = 0.010792 Jy ! Clean residual min=-0.004848 max=0.007658 Jy/beam ! Clean residual mean=-0.000031 rms=0.001211 Jy/beam ! Combined flux in latest and established models = 2.09027 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 81 components and 2.09027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128415Jy sigma=0.001645 ! Fit after self-cal, rms=0.128340Jy sigma=0.001645 ! Inverting map ! Added new window around map position (-23.6, -10.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00994163 Jy ! Total flux subtracted in 50 components = 0.00994163 Jy ! Clean residual min=-0.004731 max=0.007220 Jy/beam ! Clean residual mean=-0.000028 rms=0.001177 Jy/beam ! Combined flux in latest and established models = 2.10021 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 86 components and 2.10021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126947Jy sigma=0.001615 ! Fit after self-cal, rms=0.126872Jy sigma=0.001615 ! Inverting map ! Added new window around map position (-11.2, -4.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00926369 Jy ! Total flux subtracted in 50 components = 0.00926369 Jy ! Clean residual min=-0.004696 max=0.006372 Jy/beam ! Clean residual mean=-0.000025 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 2.10947 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 92 components and 2.10947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125683Jy sigma=0.001589 ! Fit after self-cal, rms=0.125618Jy sigma=0.001589 ! Inverting map ! Added new window around map position (4.4, 0.4). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00858205 Jy ! Total flux subtracted in 50 components = 0.00858205 Jy ! Clean residual min=-0.005065 max=0.006005 Jy/beam ! Clean residual mean=-0.000022 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 2.11805 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 98 components and 2.11805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124583Jy sigma=0.001566 ! Fit after self-cal, rms=0.124534Jy sigma=0.001566 ! Inverting map ! Added new window around map position (-11.2, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00773029 Jy ! Total flux subtracted in 50 components = 0.00773029 Jy ! Clean residual min=-0.005146 max=0.005409 Jy/beam ! Clean residual mean=-0.000020 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 2.12578 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 106 components and 2.12579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123611Jy sigma=0.001546 ! Fit after self-cal, rms=0.123564Jy sigma=0.001546 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=3.338 mas, bpa=-37.47 degrees ! Estimated noise=238.156 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0270259 Jy ! Component: 100 - total flux cleaned = 0.0472735 Jy ! Total flux subtracted in 100 components = 0.0472735 Jy ! Clean residual min=-0.005473 max=0.014846 Jy/beam ! Clean residual mean=0.000526 rms=0.002403 Jy/beam ! Combined flux in latest and established models = 2.17306 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 71 model components to the UV plane model. ! The established model now contains 171 components and 2.17306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118387Jy sigma=0.001425 ! Fit after self-cal, rms=0.117975Jy sigma=0.001420 ! Inverting map ! Added new window around map position (-31.2, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187261 Jy ! Component: 100 - total flux cleaned = 0.0335368 Jy ! Total flux subtracted in 100 components = 0.0335368 Jy ! Clean residual min=-0.004685 max=0.011321 Jy/beam ! Clean residual mean=0.000465 rms=0.001952 Jy/beam ! Combined flux in latest and established models = 2.20659 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 69 model components to the UV plane model. ! The established model now contains 228 components and 2.20659 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115259Jy sigma=0.001357 ! Fit after self-cal, rms=0.115037Jy sigma=0.001354 ! Inverting map ! Added new window around map position (-35.2, -10.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.014382 Jy ! Component: 100 - total flux cleaned = 0.0263472 Jy ! Total flux subtracted in 100 components = 0.0263472 Jy ! Clean residual min=-0.003883 max=0.008553 Jy/beam ! Clean residual mean=0.000411 rms=0.001622 Jy/beam ! Combined flux in latest and established models = 2.23294 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 72 model components to the UV plane model. ! The established model now contains 283 components and 2.23294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113316Jy sigma=0.001314 ! Fit after self-cal, rms=0.113203Jy sigma=0.001313 ! Inverting map ! Added new window around map position (-17.6, -3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112656 Jy ! Component: 100 - total flux cleaned = 0.0208917 Jy ! Total flux subtracted in 100 components = 0.0208917 Jy ! Clean residual min=-0.003356 max=0.007447 Jy/beam ! Clean residual mean=0.000375 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 2.25383 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 72 model components to the UV plane model. ! The established model now contains 324 components and 2.25383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112107Jy sigma=0.001287 ! Fit after self-cal, rms=0.112028Jy sigma=0.001286 ! Inverting map ! Added new window around map position (-40, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00917966 Jy ! Component: 100 - total flux cleaned = 0.0171698 Jy ! Total flux subtracted in 100 components = 0.0171698 Jy ! Clean residual min=-0.002990 max=0.006501 Jy/beam ! Clean residual mean=0.000345 rms=0.001175 Jy/beam ! Combined flux in latest and established models = 2.271 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 73 model components to the UV plane model. ! The established model now contains 366 components and 2.271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111280Jy sigma=0.001268 ! Fit after self-cal, rms=0.111232Jy sigma=0.001268 ! Inverting map ! Added new window around map position (-25.2, -14.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775967 Jy ! Component: 100 - total flux cleaned = 0.0144805 Jy ! Total flux subtracted in 100 components = 0.0144805 Jy ! Clean residual min=-0.002631 max=0.005397 Jy/beam ! Clean residual mean=0.000317 rms=0.001018 Jy/beam ! Combined flux in latest and established models = 2.28548 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 67 model components to the UV plane model. ! The established model now contains 402 components and 2.28548 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110676Jy sigma=0.001255 ! Fit after self-cal, rms=0.110642Jy sigma=0.001255 ! Inverting map ! Added new window around map position (-41.2, -5.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00653033 Jy ! Component: 100 - total flux cleaned = 0.0121933 Jy ! Total flux subtracted in 100 components = 0.0121933 Jy ! Clean residual min=-0.002431 max=0.004475 Jy/beam ! Clean residual mean=0.000295 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 2.29768 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 423 components and 2.29767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110230Jy sigma=0.001246 ! Fit after self-cal, rms=0.110204Jy sigma=0.001246 ! Inverting map ! Added new window around map position (-38.4, 8.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00549134 Jy ! Component: 100 - total flux cleaned = 0.01037 Jy ! Total flux subtracted in 100 components = 0.01037 Jy ! Clean residual min=-0.002881 max=0.004046 Jy/beam ! Clean residual mean=0.000277 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 2.30804 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 73 model components to the UV plane model. ! The established model now contains 460 components and 2.30804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109907Jy sigma=0.001240 ! Fit after self-cal, rms=0.109892Jy sigma=0.001240 ! Inverting map ! Added new window around map position (-18.4, -14). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00430612 Jy ! Component: 100 - total flux cleaned = 0.00791135 Jy ! Total flux subtracted in 100 components = 0.00791134 Jy ! Clean residual min=-0.002696 max=0.003348 Jy/beam ! Clean residual mean=0.000261 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 2.31596 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 62 model components to the UV plane model. ! The established model now contains 491 components and 2.31596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109651Jy sigma=0.001235 ! Fit after self-cal, rms=0.109637Jy sigma=0.001235 ! Inverting map ! Added new window around map position (-48, 7.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033864 Jy ! Component: 100 - total flux cleaned = 0.00659093 Jy ! Total flux subtracted in 100 components = 0.00659093 Jy ! Clean residual min=-0.002425 max=0.003003 Jy/beam ! Clean residual mean=0.000249 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 2.32255 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 69 model components to the UV plane model. ! The established model now contains 525 components and 2.32255 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109443Jy sigma=0.001231 ! Fit after self-cal, rms=0.109428Jy sigma=0.001231 ! Inverting map ! Added new window around map position (-8.4, -4.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00268025 Jy ! Component: 100 - total flux cleaned = 0.00552029 Jy ! Total flux subtracted in 100 components = 0.00552029 Jy ! Clean residual min=-0.002145 max=0.002767 Jy/beam ! Clean residual mean=0.000239 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 2.32807 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 63 model components to the UV plane model. ! The established model now contains 550 components and 2.32807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109272Jy sigma=0.001228 ! Fit after self-cal, rms=0.109257Jy sigma=0.001228 ! Inverting map ! Added new window around map position (-34.4, -17.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00219094 Jy ! Component: 100 - total flux cleaned = 0.00489929 Jy ! Total flux subtracted in 100 components = 0.00489929 Jy ! Clean residual min=-0.001968 max=0.002557 Jy/beam ! Clean residual mean=0.000228 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 2.33297 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 55 model components to the UV plane model. ! The established model now contains 566 components and 2.33297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109125Jy sigma=0.001226 ! Fit after self-cal, rms=0.109111Jy sigma=0.001226 ! Inverting map ! Added new window around map position (-41.2, -12.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198462 Jy ! Component: 100 - total flux cleaned = 0.00433106 Jy ! Total flux subtracted in 100 components = 0.00433106 Jy ! Clean residual min=-0.001840 max=0.002331 Jy/beam ! Clean residual mean=0.000219 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 2.3373 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 60 model components to the UV plane model. ! The established model now contains 583 components and 2.3373 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109001Jy sigma=0.001224 ! Fit after self-cal, rms=0.108990Jy sigma=0.001224 ! Inverting map ! Added new window around map position (-17.6, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00180673 Jy ! Component: 100 - total flux cleaned = 0.00403159 Jy ! Total flux subtracted in 100 components = 0.00403159 Jy ! Clean residual min=-0.001833 max=0.002184 Jy/beam ! Clean residual mean=0.000212 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 2.34133 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 58 model components to the UV plane model. ! The established model now contains 602 components and 2.34133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108896Jy sigma=0.001222 ! Fit after self-cal, rms=0.108886Jy sigma=0.001222 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00 HN 1.00* ! KK 1.00 KP 1.00* LA 1.00* MC 1.00* ! MK 1.00 NL 1.00* NY 0.99 ON 1.00 ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00 HN 1.00* ! KK 1.00 KP 1.00* LA 1.00* MC 1.00* ! MK 1.00 NL 1.00* NY 1.00 ON 1.00 ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 0.99 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00 HN 1.00* ! KK 1.00 KP 1.00* LA 1.00* MC 1.00* ! MK 1.00 NL 1.00* NY 1.00 ON 1.01 ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00* KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 GC 1.00* HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 0.99 ! OV 1.00 PT 1.00 SC 1.00 WF 1.00 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 1.00 GC 1.00 HN 1.00 ! KK 1.00 KP 1.00 LA 1.00 MC 1.00 ! MK 1.00 NL 1.00 NY 1.00 ON 1.00 ! OV 1.00 PT 1.00 SC 1.00 WF 0.99 ! WZ 1.00 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.00* FD 1.00* GC 1.00 HN 1.00* ! KK 1.00 KP 1.00* LA 1.00* MC 1.00* ! MK 1.00 NL 1.00* NY 0.99 ON 1.01 ! OV 1.00* PT 1.00* SC 1.00* WF 1.00* ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.108886Jy sigma=0.001222 ! Fit after self-cal, rms=0.108701Jy sigma=0.001222 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.008 mas, bmaj=3.337 mas, bpa=-37.41 degrees ! Estimated noise=237.994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109157 Jy ! Component: 100 - total flux cleaned = 0.00307651 Jy ! Total flux subtracted in 100 components = 0.00307651 Jy ! Clean residual min=-0.001866 max=0.002019 Jy/beam ! Clean residual mean=0.000193 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 2.34441 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 54 model components to the UV plane model. ! The established model now contains 618 components and 2.34441 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108626Jy sigma=0.001220 ! Fit after self-cal, rms=0.108618Jy sigma=0.001220 ! Inverting map ! Added new window around map position (-32, 4.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153932 Jy ! Component: 100 - total flux cleaned = 0.00327949 Jy ! Total flux subtracted in 100 components = 0.00327949 Jy ! Clean residual min=-0.001900 max=0.001936 Jy/beam ! Clean residual mean=0.000187 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 2.34769 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 53 model components to the UV plane model. ! The established model now contains 637 components and 2.34769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108555Jy sigma=0.001219 ! Fit after self-cal, rms=0.108548Jy sigma=0.001219 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110873 Jy ! Component: 100 - total flux cleaned = 0.00261935 Jy ! Total flux subtracted in 100 components = 0.00261935 Jy ! Clean residual min=-0.001873 max=0.001858 Jy/beam ! Clean residual mean=0.000181 rms=0.000432 Jy/beam ! Combined flux in latest and established models = 2.35031 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 57 model components to the UV plane model. ! The established model now contains 651 components and 2.35031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108496Jy sigma=0.001218 ! Fit after self-cal, rms=0.108472Jy sigma=0.001218 ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=3.336 mas, bpa=-37.45 degrees ! Estimated noise=238.002 mJy/beam. ! Added new window around map position (-39.2, 16.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126268 Jy ! Component: 100 - total flux cleaned = 0.0026577 Jy ! Total flux subtracted in 100 components = 0.0026577 Jy ! Clean residual min=-0.001778 max=0.001797 Jy/beam ! Clean residual mean=0.000175 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 2.35296 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 662 components and 2.35296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108416Jy sigma=0.001217 ! Fit after self-cal, rms=0.108416Jy sigma=0.001217 ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=3.336 mas, bpa=-37.47 degrees ! Estimated noise=238.015 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011099 Jy ! Component: 100 - total flux cleaned = 0.0024779 Jy ! Total flux subtracted in 100 components = 0.0024779 Jy ! Clean residual min=-0.001739 max=0.001742 Jy/beam ! Clean residual mean=0.000170 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 2.35544 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 56 model components to the UV plane model. ! The established model now contains 671 components and 2.35544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108369Jy sigma=0.001216 ! Fit after self-cal, rms=0.108355Jy sigma=0.001216 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 1803+784_S ! Writing UV FITS file: 1803+784_S.uvf ! Writing 671 model components to file: 1803+784_S.mod ! wwins: Wrote 27 windows to 1803+784_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.009 x 3.336 at -37.47 degrees (North through East) ! Clean map min=-0.0017373 max=1.7727 Jy/beam ! Writing clean map to FITS file: 1803+784_S.fits ! Writing difmap environment to: 1803+784_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 1803+784_S] device 1803+784_Suv.ps/vps,1,2 ! Attempting to open device: '1803+784_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 1803+784_Sim.ps/vps ! Attempting to open device: '1803+784_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=3.009 mas, bmaj=3.336 mas, bpa=-37.47 degrees ! Estimated noise=238.015 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.009 x 3.336 at -37.47 degrees (North through East) ! Clean map min=-0.0017373 max=1.7727 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo5-0.4] quit ! Quitting program ! Log file 1803+784_S.log closed on Thu Feb 7 17:07:15 2008