! Started logfile: 0202+149_S.log on Sun Jan 13 17:54:41 2008 observe 0202+149_S.edt ! Reading UV FITS file: 0202+149_S.edt ! AN table 1: 30 integrations on 136 of 136 possible baselines. ! AN table 2: 53 integrations on 136 of 136 possible baselines. ! AN table 3: 23 integrations on 136 of 136 possible baselines. ! AN table 4: 48 integrations on 136 of 136 possible baselines. ! Apparent sampling: 0.227607 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: 0202+149 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22497e+09 8e+06 1 8e+06 ! 02 2 2.24497e+09 8e+06 1 8e+06 ! 03 3 2.33497e+09 8e+06 1 8e+06 ! 04 4 2.36497e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 1251 lines of history. ! ! Reading 19068 visibilities. ![@gonzo6-0.4 0202+149_S] print "***********************************" ! *********************************** print "*** Using gonzo instruction set ***" ! *** Using gonzo instruction set *** print "***********************************" ! *********************************** float field_size field_size = 1024 float field_cell field_cell = 0.4 integer clean_niter clean_niter = 50 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float win_mult win_mult = 1.8 float solint solint = 3.6/6.0 logical doflt doflt = true logical doamp float new_peak float flux_cutoff mapsize field_size,field_cell ! Map grid = 1024x1024 pixels with 0.400x0.400 milli-arcsec cellsize. select ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 305 telescope corrections were flagged in sub-array 1. ! A total of 495 telescope corrections were flagged in sub-array 2. ! A total of 223 telescope corrections were flagged in sub-array 3. ! A total of 676 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 305 telescope corrections were flagged in sub-array 1. ! A total of 494 telescope corrections were flagged in sub-array 2. ! A total of 223 telescope corrections were flagged in sub-array 3. ! A total of 672 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 318 telescope corrections were flagged in sub-array 1. ! A total of 516 telescope corrections were flagged in sub-array 2. ! A total of 220 telescope corrections were flagged in sub-array 3. ! A total of 727 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 314 telescope corrections were flagged in sub-array 1. ! A total of 517 telescope corrections were flagged in sub-array 2. ! A total of 220 telescope corrections were flagged in sub-array 3. ! A total of 723 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=0.529577Jy sigma=0.007973 ! Fit after self-cal, rms=0.529182Jy sigma=0.007994 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvweight 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.124 mas, bmaj=4.45 mas, bpa=-14.15 degrees ! Estimated noise=900.038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.967003 Jy ! Total flux subtracted in 50 components = 0.967003 Jy ! Clean residual min=-0.055559 max=0.271078 Jy/beam ! Clean residual mean=0.000036 rms=0.016850 Jy/beam ! Combined flux in latest and established models = 0.967003 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.967003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.550340Jy sigma=0.008308 ! Fit after self-cal, rms=0.550400Jy sigma=0.008308 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.257974 Jy ! Total flux subtracted in 50 components = 0.257974 Jy ! Clean residual min=-0.045935 max=0.162573 Jy/beam ! Clean residual mean=0.000040 rms=0.012163 Jy/beam ! Combined flux in latest and established models = 1.22498 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 1.22498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410613Jy sigma=0.006155 ! Fit after self-cal, rms=0.409837Jy sigma=0.006151 ! Inverting map ! Added new window around map position (-3.6, 2.8). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.16624 Jy ! Total flux subtracted in 50 components = 0.16624 Jy ! Clean residual min=-0.038484 max=0.085476 Jy/beam ! Clean residual mean=0.000048 rms=0.009624 Jy/beam ! Combined flux in latest and established models = 1.39122 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 1.39122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.335431Jy sigma=0.004979 ! Fit after self-cal, rms=0.332439Jy sigma=0.004954 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115117 Jy ! Total flux subtracted in 50 components = 0.115117 Jy ! Clean residual min=-0.032928 max=0.064403 Jy/beam ! Clean residual mean=0.000054 rms=0.008025 Jy/beam ! Combined flux in latest and established models = 1.50633 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 33 components and 1.50633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.288374Jy sigma=0.004222 ! Fit after self-cal, rms=0.287185Jy sigma=0.004212 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0868718 Jy ! Total flux subtracted in 50 components = 0.0868718 Jy ! Clean residual min=-0.029031 max=0.049243 Jy/beam ! Clean residual mean=0.000059 rms=0.006974 Jy/beam ! Combined flux in latest and established models = 1.59321 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 16 model components to the UV plane model. ! The established model now contains 41 components and 1.59321 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257902Jy sigma=0.003703 ! Fit after self-cal, rms=0.257288Jy sigma=0.003697 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0674674 Jy ! Total flux subtracted in 50 components = 0.0674674 Jy ! Clean residual min=-0.026390 max=0.038799 Jy/beam ! Clean residual mean=0.000062 rms=0.006263 Jy/beam ! Combined flux in latest and established models = 1.66067 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 47 components and 1.66067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237447Jy sigma=0.003339 ! Fit after self-cal, rms=0.237085Jy sigma=0.003336 ! Inverting map ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535875 Jy ! Total flux subtracted in 50 components = 0.0535875 Jy ! Clean residual min=-0.024657 max=0.034071 Jy/beam ! Clean residual mean=0.000064 rms=0.005771 Jy/beam ! Combined flux in latest and established models = 1.71426 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 55 components and 1.71426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223366Jy sigma=0.003079 ! Fit after self-cal, rms=0.223141Jy sigma=0.003077 ! Inverting map ! Added new window around map position (-0.8, 5.6). ! clean: niter=50 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0447418 Jy ! Total flux subtracted in 50 components = 0.0447418 Jy ! Clean residual min=-0.024050 max=0.028680 Jy/beam ! Clean residual mean=0.000066 rms=0.005411 Jy/beam ! Combined flux in latest and established models = 1.759 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 1.759 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213076Jy sigma=0.002887 ! Fit after self-cal, rms=0.212874Jy sigma=0.002885 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Uniform Weighting CLEAN ***" ! *** Finished Uniform Weighting CLEAN *** print "****************************************" ! **************************************** uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.543 mas, bmaj=5.567 mas, bpa=-15.15 degrees ! Estimated noise=467.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.07302 Jy ! Component: 100 - total flux cleaned = 0.124125 Jy ! Total flux subtracted in 100 components = 0.124125 Jy ! Clean residual min=-0.019908 max=0.037431 Jy/beam ! Clean residual mean=0.000356 rms=0.006365 Jy/beam ! Combined flux in latest and established models = 1.88313 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 97 components and 1.88313 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.191953Jy sigma=0.002462 ! Fit after self-cal, rms=0.191391Jy sigma=0.002453 ! Inverting map ! Added new window around map position (3.6, 3.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0430035 Jy ! Component: 100 - total flux cleaned = 0.0752929 Jy ! Total flux subtracted in 100 components = 0.0752929 Jy ! Clean residual min=-0.017875 max=0.027939 Jy/beam ! Clean residual mean=0.000314 rms=0.005230 Jy/beam ! Combined flux in latest and established models = 1.95842 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 40 model components to the UV plane model. ! The established model now contains 127 components and 1.95842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182512Jy sigma=0.002288 ! Fit after self-cal, rms=0.182300Jy sigma=0.002285 ! Inverting map print "****************************************" ! **************************************** print "*** Finished Natural Weighting CLEAN ***" ! *** Finished Natural Weighting CLEAN *** print "****************************************" ! **************************************** gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 GC 1.14 HN 0.97 ! KK 1.00* KP 0.91 LA 0.96 MC 0.95 ! MK 1.00* NL 0.97 NY 1.02 ON 1.06 ! OV 0.95 PT 1.03 SC 0.97 WF 1.14 ! WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 GC 1.00* HN 0.96 ! KK 1.04 KP 0.93 LA 0.95 MC 1.14 ! MK 0.93 NL 0.96 NY 1.01 ON 1.00* ! OV 1.01 PT 1.00 SC 0.92 WF 1.02 ! WZ 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.99 GC 0.93 HN 0.94 ! KK 0.93 KP 0.92 LA 0.96 MC 1.00* ! MK 0.94 NL 0.95 NY 1.07 ON 1.00* ! OV 0.98 PT 1.00* SC 0.95 WF 1.07 ! WZ 1.00* ! ! A total of 60 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 1.03 ! KK 1.00* KP 1.00* LA 1.00* MC 0.98 ! MK 1.00* NL 0.93 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.92 WF 1.01 ! WZ 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 GC 1.11 HN 1.00 ! KK 1.00* KP 0.95 LA 0.99 MC 0.95 ! MK 1.00* NL 0.99 NY 1.00 ON 1.04 ! OV 0.95 PT 0.97 SC 1.03 WF 1.14 ! WZ 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 0.99 GC 1.00* HN 0.97 ! KK 1.01 KP 0.97 LA 0.98 MC 1.05 ! MK 0.96 NL 1.06 NY 1.00 ON 1.00* ! OV 0.95 PT 0.95 SC 0.97 WF 1.06 ! WZ 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 0.97 GC 0.92 HN 0.95 ! KK 0.92 KP 0.96 LA 0.97 MC 1.00* ! MK 0.93 NL 1.14 NY 1.05 ON 1.00* ! OV 0.92 PT 1.00* SC 1.03 WF 1.06 ! WZ 1.00* ! ! A total of 48 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 1.00 ! KK 1.00* KP 1.00* LA 1.00* MC 1.01 ! MK 1.00* NL 0.91 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.96 WF 1.06 ! WZ 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.96 GC 1.12 HN 1.10 ! KK 1.00* KP 0.98 LA 0.95 MC 1.00* ! MK 1.00* NL 1.00 NY 1.06 ON 1.07 ! OV 0.96 PT 1.02 SC 1.08 WF 1.16 ! WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.98 GC 1.00* HN 1.08 ! KK 1.02 KP 1.06 LA 0.96 MC 1.58 ! MK 0.93 NL 1.06 NY 1.02 ON 1.00* ! OV 1.01 PT 1.00 SC 1.07 WF 0.97 ! WZ 1.04 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 GC 0.95 HN 1.01 ! KK 0.92 KP 1.02 LA 0.93 MC 1.00* ! MK 0.89 NL 1.07 NY 1.11 ON 1.00* ! OV 0.99 PT 1.00* SC 1.05 WF 1.02 ! WZ 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 1.10 ! KK 1.00* KP 1.00* LA 1.00* MC 1.61 ! MK 1.00* NL 0.84 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.93 WF 1.14 ! WZ 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.92 GC 1.13 HN 1.06 ! KK 1.00* KP 0.99 LA 0.90 MC 1.00* ! MK 1.00* NL 1.00 NY 1.04 ON 1.14 ! OV 0.85 PT 0.99 SC 1.08 WF 1.15 ! WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.92 GC 1.00* HN 1.05 ! KK 1.04 KP 1.04 LA 0.91 MC 1.44 ! MK 0.92 NL 1.09 NY 1.03 ON 1.00* ! OV 0.95 PT 1.00 SC 1.06 WF 1.03 ! WZ 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.89 GC 0.98 HN 1.00 ! KK 0.97 KP 1.01 LA 0.89 MC 1.00* ! MK 0.86 NL 1.14 NY 1.06 ON 1.00* ! OV 0.95 PT 1.00* SC 1.07 WF 1.06 ! WZ 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00* FD 1.00* GC 1.00* HN 1.00 ! KK 1.00* KP 1.00* LA 1.00* MC 1.93 ! MK 1.00* NL 0.89 NY 1.00* ON 1.00* ! OV 1.00* PT 1.00* SC 0.96 WF 1.02 ! WZ 1.00* ! ! ! Fit before self-cal, rms=0.182300Jy sigma=0.002285 ! Fit after self-cal, rms=0.142468Jy sigma=0.001616 dynam = dynam - 0.5 doamp = false flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=5.627 mas, bpa=-15.27 degrees ! Estimated noise=465.854 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00750656 Jy ! Component: 100 - total flux cleaned = 0.00779535 Jy ! Total flux subtracted in 100 components = 0.00779535 Jy ! Clean residual min=-0.007804 max=0.008771 Jy/beam ! Clean residual mean=0.000555 rms=0.002204 Jy/beam ! Combined flux in latest and established models = 1.96622 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 135 components and 1.96622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141309Jy sigma=0.001598 ! Fit after self-cal, rms=0.141276Jy sigma=0.001596 ! Inverting map dynam = dynam - 1.0 doamp = true solint = solint * (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163836 Jy ! Component: 100 - total flux cleaned = 0.00208891 Jy ! Total flux subtracted in 100 components = 0.00208891 Jy ! Clean residual min=-0.007527 max=0.008384 Jy/beam ! Clean residual mean=0.000554 rms=0.002165 Jy/beam ! Combined flux in latest and established models = 1.9683 Jy ! Performing amp+phase self-cal over 1 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 146 components and 1.9683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140887Jy sigma=0.001590 ! Fit after self-cal, rms=0.137671Jy sigma=0.001548 ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=5.631 mas, bpa=-15.24 degrees ! Estimated noise=465.861 mJy/beam. doamp = false solint = solint / (6.0/3.6) flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal doamp, doflt, solint new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-37.2, -17.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00810023 Jy ! Component: 100 - total flux cleaned = 0.0105215 Jy ! Total flux subtracted in 100 components = 0.0105215 Jy ! Clean residual min=-0.006893 max=0.008039 Jy/beam ! Clean residual mean=0.000519 rms=0.002037 Jy/beam ! Combined flux in latest and established models = 1.97883 Jy ! Performing phase self-cal over 0.6 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 156 components and 1.97883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137099Jy sigma=0.001540 ! Fit after self-cal, rms=0.137079Jy sigma=0.001539 ! Inverting map print "***********************************" ! *********************************** print "*** Finished Amplitude Self-Cal ***" ! *** Finished Amplitude Self-Cal *** print "***********************************" ! *********************************** save 0202+149_S ! Writing UV FITS file: 0202+149_S.uvf ! Writing 156 model components to file: 0202+149_S.mod ! wwins: Wrote 5 windows to 0202+149_S.win ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.577 x 5.631 at -15.24 degrees (North through East) ! Clean map min=-0.0067077 max=1.306 Jy/beam ! Writing clean map to FITS file: 0202+149_S.fits ! Writing difmap environment to: 0202+149_S.par print "****************************" ! **************************** print "*** Now, make some plots ***" ! *** Now, make some plots *** print "****************************" ! **************************** ![@gonzo_plot 0202+149_S] device 0202+149_Suv.ps/vps,1,2 ! Attempting to open device: '0202+149_Suv.ps/vps' radplot ! Using default options string "m1" uvplot ! Using default options string "" device 0202+149_Sim.ps/vps ! Attempting to open device: '0202+149_Sim.ps/vps' uvweight 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. loglevs -1,2048,2 ! The new contour levels are: ! -1 1 2 4 8 16 32 64 128 256 512 1024 2048 cmul = imstat(rms)*3 ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=5.631 mas, bpa=-15.24 degrees ! Estimated noise=465.861 mJy/beam. mappl cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.577 x 5.631 at -15.24 degrees (North through East) ! Clean map min=-0.0067077 max=1.306 Jy/beam ![Exited script file: gonzo_plot] ![Exited script file: gonzo6-0.4] quit ! Quitting program ! Log file 0202+149_S.log closed on Sun Jan 13 17:54:49 2008